Merge cannot make Boot Camp virtual machine: perhaps too many places of the VM?

Similar Questions

• Transfer of personal use of Boot Camp Virtual Machine license

  Hello!

  I bought a disc of system integrator OEM 64 - bit Windows 8 for use under the terms of the personal use license and it installed on my MacBook Pro using Boot Camp.
  It turns out that the integrated graphics (Intel HD 3000) is not available in configuration dual-boot.
  so I cannot use the dedicated graphics card (AMD Radeon HD 6750 M) (for which I should apparently accused Apple, but that's off-topic anyway).
  Using the graphics card Intel (for example Quick Sync Video support) has been the reason why I chose a dual boot as opposed to a virtual machine configuration.
  Because this does not work, I will try and transfer the installation on a virtual machine in the near future.
  I understand that the personal use license does not allow me to run the two facilities (Boot Camp and VM), but do I have that right to say
  the conditions of licence it is for me to transfer the license to a virtual machine, as I have delete the partition Boot Camp of my MacBook Pro?
  Assuming the above is correct, how exactly would ensure the transfer is as painless as possible? For example:
  -AFAICT I would have to get in touch with a Microsoft Product Activation Center by phone.
  Is there a better and/or other method or is it my best bet?
  -It would be best to call before you do anything, or only after the installation of Windows in the VM (i.e. upon activation)?
  -Should what information I have ready to give Microsoft?
  Thank you
  Tim CH.

  Hello!

  I bought a disc of system integrator OEM 64 - bit Windows 8 for use under the terms of the personal use license and it installed on my MacBook Pro using Boot Camp.

  It turns out that the integrated graphics (Intel HD 3000) is not available in configuration dual-boot.

  so I cannot use the dedicated graphics card (AMD Radeon HD 6750 M) (for which I should apparently accused Apple, but that's off-topic anyway).

  Using the graphics card Intel (for example Quick Sync Video support) has been the reason why I chose a dual boot as opposed to a virtual machine configuration.

  Because this does not work, I will try and transfer the installation on a virtual machine in the near future.

  I understand that the personal use license does not allow me to run the two facilities (Boot Camp and VM), but do I have that right to say

  the conditions of licence it is for me to transfer the license to a virtual machine, as I have delete the partition Boot Camp of my MacBook Pro?

   

  That's right, simply remove the installation of Boot Camp, then you can transfer to a virtual computer and reactivate by phone:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

  ------------------------------------------------------------------------------

  Assuming the above is correct, how exactly would ensure the transfer is as painless as possible? For example:
  -AFAICT I would have to get in touch with a Microsoft Product Activation Center by phone.
  Is there a better and/or other method or is it my best bet?
   
  Nope. activation of the phone is your only option.
  -It would be best to call before you do anything, or only after the installation of Windows in the VM (i.e. upon activation)?
  You can not, you make the call "after" you have transferred the license.
  -Should what information I have ready to give Microsoft?
   
  Your Confirmation ID, it will appear in the activation window.
  Thank you
  Tim CH.

• After update of El Capitan, Fusion 8 will not open the Boot Camp virtual machine

  Greetings!

  I'm having a problem with the Fusion 8 since my update to El Capitan.   My Boot Camp partition is functional and I can boot directly into it very well - all my files and data are intact.   However, when I try to start the machine Boot Camp in a virtual machine within OS x, I get the following error:

  Operation not permitted

  Cannot open disk "/ Administrator/Users / / Library/Application Support/VMWare Fusion/Virtual Machines/Boot Camp/Boot Camp 2.vmwarevm/Boot Camp 2.vmdk' or one of the snapshot disks it depends."   Module 'Disc' on failed.   Unable to start the virtual machine. »

  I remember a message from the update of El Capitan, indicating that it is an element incompatible Parallels and disabled.   I thought it was the components of laggard remains from when I ran a parallel trial a year ago, but perhaps it is related?

  Help, please!

  Hi gang,.

  I have a solution for this!   After I created this post, I created a ticket with support and they solved it for me.

  Here's the skinny: El Capitan has changed something wise permissions to access data files on the Bootcamp partition.  VMWare said they were working to solve this, but in the meantime they had me do made me upward and short... just remove the entry of the virtual machine Boot Camp in Fusion and recreate it.   I recommend you save beforehand in case where, but this process does not affect the data on your partition, only one definition of the Fusion of the virtual machine and how you can access your score.

• How to make a Java Virtual Machine to work in 64-bit version of Windows 7

  How to make a Java Virtual Machine to work in 64-bit version of Windows 7

  Download you Sun: http://www.java.com/en/download/index.jsp

• Sorry this application cannot run under a Virtual Machine

  How can I solve this problem. I can not choose the option of Windows 8 and activate the button of Hyper-v. I try to get a game running on windows 7.

  Sure, I can. All first, open the settings of Bitdefender, antivirus and silence him Active Virus Control. After that, I was able to play games like Dead space 3, Kane and lynch etc. That is the question on Windows 7 for the warning to error: Sorry, this application cannot run under a Virtual Machine.

• You cannot power on a virtual machine in a virtual machine

  Hello

  Only, I converted a physical blade to a virtual machine running on ESX4 using VMware converter 4. The converted virtual computer is running VMware server 1.0.5 and machines virtual option 2. After the P2V process, I am unable to power on virtual machines in VMware server. I get the following message:

  You cannot power on a virtual machine in a virtual machine

  I see there are some entries that I can put in the vmx file

  monitor_control.vt32 = 'TRUE '.

  monitor_control.restrict_backdoor = 'TRUE '.

  However, this does not solve my problem. Is it possible to edit a VMX VMware Server so the virtual prompt runs in a virtual machine of ESX4

  Thanks in advance

  Oli

  VMware Server 1.x does not support nested virtual machines.  Workstation 7 is the first product with the official support of virtualization nested, although other recent VMware products should work, with some constraints.  See nested running VMs.

• Cannot print from a virtual machine?

  Hello

  I'm using VMware Workstation 7 on a Workstation Windows 7 Professional.

  I have set up a virtual machine and fired successfully before.

  When I start the virtual machine, it does not connect to the printer and I press OK.

  When I press print in any application virtual machine, it shows that the document is printed.  I find that there is a print job in the queue of the virtual machine.  However, the State of the printer is "offline".

  When I change unselect 'work offline', there is an error message saying "there is an error found when printing the document XXXX to USB001.  Do you want to start or cancel the job.

  Is there something wrong?

  Your opinion is requested.

  Post edited by: TonyJK

  Obvious questions

  The printer is turned on?

  You can print to the printer by OTHER computers via USB?

  Have you done a realitiy check to make sure that the USB port is always enabled in the virtual machine?

  Did you try to uninstall, reinstall the printer driver / printer port?

• VMware Workstation is unable to open one of the virtual disks required by this virtual machine because it is larger than the maximum file size supported by the host file system.

  I'm transitioning from Windows XP (64-bit) on a new computer with Windows 7 installed.  I undertook to VMWare Workstation 6 7.0.1 in the process.  The problem is with a very large RAID 5 volume on the new system.  It's a score of 5.45 TB (TPG and NTFS).

  When I try to start a virtual machine on this volume, I get the message "VMware Workstation cannot open one of the virtual disks required by this virtual machine because it is larger than the maximum size of the files supported by the host file system.".  This is obviously not true.  If I copy the virtual machine to another drive on the system, it starts without a problem.

  Anyone have any ideas on how to work around this problem?

  try to add this line in the vmx file:

  diskLib.sparseMaxFileSizeCheck = "false".

  Maybe it helps.

  VMDK-type do you use?

  monolithicSparse? -C' is the only part type more?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• VI 3 virtual machine SCSI disk is changed on the IDE drive in vsphere 4

  Hi Experts,

  When the virtual machine SCSI disk is add to the Vsphere virtual machine, only the scsci disk 3 VI is replaced by the mode IDE drive can be added.

  How to solve it? Thank you.

  Add a SCSI controller on the virtual machine and then add the disk

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  -Josh

  Trying to learn

• Virtual machines Windows display "reboot and select the proper boot device or insert boot media in selected boot device.

  I downloaded the VM Windows and created a machine. The machine should start with ' Microsoft Corporation PXE Boot Agent v2.00 (built-in BIOS) (C) Copyright 2008 Microsoft Corporation all rights reserved.»

  "CLIENT MAC ADDR: 00 03 FF 8 1 C 2 C GUID: 2FA ' and more digits"DHCP. "... "with a spinny beside the points thing. After awhile, the... won't have a message "no boot file received" or "any offer DHCP or proxyDHCP was received" with a "reboot and device or insert boot media select start suitable for the selected boot device". What should I do? It also appears on other virtual machines. I tried pressing tools and clicking on install the built-in components, but nothing happens!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• Cannot turn on new virtual machines

  Hello world

  I am running ESXi 5.1.0 (1483097) on a server Dell PowerEdge T300 with 24 GB of RAM and a couple of terabytes of HARD disk space. I have a 64 GB SSD as my default swap file location. I'm unable to turn any VMs created on this server (has only one handful of other virtual machines running on it currently, not more than 4-8GB RAM each). When I try to turn on a new virtual machine, I get the following error:

  An error was received from the ESX host turning on VM <vmname>.

  Has no power on the virtual machine.

  Could not power on VM: insufficient resources.

  Cannot extend the pagefile to 32768 k k 93504.

  Cannot extend the pagefile to 32768 KB 94208 KB.

  There are lots of free RAM available, and I don't have in my pool only resource that all virtual machines live subject. I tried to set the location of the swap file VM to store data of the VM, but that has no effect. Any ideas?

  Hello

  you are indeed running out of space on your destination of swap - you have only 56 MB of free space on your SSD. You're also out of space for swap on datastore1 and 4. I suggest check it and delete all unnecessary data. Please note that by default without reservation, the VM creates a swap file that is equal to the size of RAM allocated to it. If the startup fails with swap on the hard drive, try quick vMotioning or cold - migrate the virtual computer to another storage. Also you could do a lot better with the free space by consolidating all your storage to a single VMFS volume.

• Cannot start a virtual machine from an ISO stored on the NFS share

  We have an NFS share on our Windows 2003 server to serve the ISOs for virtual machines

  However if we have attached an ISO to a virtual machine and configured to boot from it, it does not find the ISO, just attempts to boot from the network, but if copy us the ISO in a data store local it will start and install correctly.

  We set the NFS share for anonymous access on Windows Server, we tried with both read and write permissions, but still no luck

  Anyone can get an idea about this

  Thank you

  Kimble

  ESXi must connect to the NFS share with the root account.  You will have to map the root login to an account on the Windows Server.   You can see a sample of the instructions here - http://www.sohoadvisers.com/tutorials/vmware-esxi/connect-esxi-to-windows-nfs.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Report on the vmdk files that make up a virtual machine

  Hello
  Is it possible to create a report/dashboard that would map a virtual machine to its VMDK files in vFog Pro 6.0?
  Example: vmname - data name/ID - vmname.vmdk, vmname1.vmdk store...
  THX

  samardak,
  I think it's possible to pull this information from vFoglight. SOM of our API calls should remove this information of the Victoria Cross.
  That said, it would be wise to either contact your landlord account for assistance in the creation of this report. Your account owner can facilitate the resources needed to help you with a personalized report. If you don't know who is the owner of your account, you can contact support, and we can refer you to the right contact person or group.
  -LM

• Cannot copy file to virtual machine host computer

  People,

  Hello. I use VM Player 3. My host computer is Windows 7 and VM is Oracle Linux 5. I used to copy files from the virtual machine host successfully machine. But now, when I copy a virtual machine host machine zip file, the error message appears:

  "Unable to write file in Virtual Machine.Aborting the copy file operation."

  The virtual machine's memory is 2 GB, and the file is about 900 MB. I think that there is enough memory to hold the file.

  My question is:

  Any folk can help solve the question above?

  Thanks in advance.

  Hello

  To be able to copy this file in your virtual machine, you need about 2 GB of free space on the disk in the virtual machine on the disk that has the temp folder.

  The size of the RAM to the virtual machine is not really important.

  --

  Wil