LASERJET 2420: hp2420 LASERJET ATTN LED FLASHES WHEN THE WORK of PRINTING SENT. ATTN PRESS MUST BE ON EVERY PRINT JOB TO PRINT

Similar Questions

• Is it possible to have windows to automatically select a spare printer by default when the selected default printer is off line?

  I use a laptop and move between two locations each with its own printer.  Whenever I move, I have to change the default printer by opening printers & faxes from the control panel.  Is it possible to have windows to automatically select a spare printer by default when the selected default printer is off line?

  Hi Tom,

  If the default printer is not in offline mode, it will detect the different printer but it will not be a default one.

• What happens when the error report are sent to Microsoft from my computer?

  I received a call from a Clayton asked for a Windows Service Center. He called about the error reports that were sent from my computer to Microsoft. He gave his phone number as 91 9008 37 23295 in Calcutta, India. If this has nothing to do with Microsoft or Windows?

  John is correct.  And to answer your direct question: "what happens when the error report are sent to Microsoft from my computer? -Not much.  If these reports are used at all, they are used for the statistical analysis and do not respond to individuals.

• Dell Precision M6500: Reference DELL M6 500 computer laptop does not charge when the work and no start-up when which

  Laptop DELL M6 500, do not load when the work and no start-up when which

  just bettry lights blink when phone on Exchange when I plug laptop tap, on bettry

• PXI-1042 - switch LED green flashing when the chassis is disabled

  When the PXI-1042 chassis is off, the green signal LED power switch (I use the word "flicker" because the LED flashes irregularly and without full intensity) and the cooling fans will be starts randomly (sometimes one at a time, sometimes both).  When the chassis is on and in use, there is no significant difference in normal operation.  I understand that a flashing green light indicates 'air intake temperature exceeded the operating range chassis' (by Manuel PXI-1042).  I don't think that's the problem, because the chassis works very well when you use it.

  Everyone knows about this problem?  Is this a problem?

  Thank you!

  My biggest concern would be there that it will not warn you when you are outside the temperature range. However, since it does not work correctly when the chassis is turned on, I don't think that there is a problem. Of course, there is no way to know for sure without sending the camera for RMA, but my best guess is that you'll be fine.

  Katie

• Pavilion a1130n block of POWER LED flashes when it is connected to the mobo

  We had a power outage and now PC won't start at all and power and power supply lights both blink.  I went through the list of power supply.  When everything is unplugged PSU led remains lit.  When I plug in the mobo light starts flashing again.

  On another forum, someone suggested clearing CMOS as check/solution possible, but I've seen suggested once on all of the controls/solutions out there.

  Should I try clearing CMOS or who would really do something to help here?

  Also, I am trying to determine the most cost-effective path of repair/replacement.  The main consideration for me is software and data on the hard drive, I would really like.  I know that the machine is old so I'm thinking the mobo may need to be upgraded in any case of 6 years and the PSU, should probably due to his age and the likelihood it will fail before too long.

  Any guidance is appreciated.

  lardfw wrote: I deleted CMOS (using the pull method) and there is no change. Well, I understand that it was a long shot. I followed the checklist (do not skip steps).  I was a little fuzzy on the checklist is should I go ahead and take memory cards and disconnect the headset, microphone, usb ports, etc to the MoBo? During the only thing connected to the PSU is the MoBo.  Nothing connected to the PSU = green fixed.  Connected to the power supply flashing green = MoBo. So my concern is passed: the hell of the MoBo or PSU is (because I'm buddy up to the idea that it is).  in order to use the hard drive in a new configuration (specifically the software and data on the hard drive).

  Hello lardfw, with nothing connected to the motherboard and you try to start the system, if the motherboard was not defective, with the power supply work as it should, you get all kinds of sound signals, especially when the memory is removed.

  I'm sure that the motherboard has failed. You should be able to remove the hard drive and install it into another system such as a secondary drive and not the bootable disc and be able to copy some files from the hard drive. You would not be able to access the applications.

  Once you have recovered all the data you may be, you could then reformat the hard drive and use the total capacity of the disk as a backup, or even use it as a bootable stick with a new operating system installation.

• IM update ios 9.2, in that the problem is the alrts led flash does not work?

  How about the alerts led to the iphone flash 5? IM updade ios 9.2 trow wifi. Led flash alerts do not work pls help...

  Hi Armsloy91978,

  Looks like you were the LED Flash option for enabled alerts until you updated, but it doesn't seem to work now. I would check that it is always enabled everything first:

  Turn on the Flash LED for alerts. Go to settings > general > accessibility > Flash LED for alerts.

  From: LED Flash for alerts - iPhone

  If it is checked, then turn it off and leave the settings application and any other application you get Notifications. You can also quit all applications running if you don't know you have them all just to make sure:

  Force an app to close the iOS

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset

  Thank you for using communities of Apple Support, let us know how it goes!

• my power green LED flashes and the laptop does not start

  Mr President, I have laptop computer Sony vaio, when I press the power button, my power LED green light begins to blink, sometimes sometimes brighter Sun, but nothing else happened, my fan remains closed, screen remains black, just POWER green LED flashing, flashing in the same way as orange light flashes in case of in standby mode, it is usually solid green , but now it flashes and the laptop does not start, what should I do Sir...

  My model number is the model of Sony VAIO PCG-61911W... His VPCEG18FG of the product name

  ankurgupta53,

  It seems that your device is not post.  You can try reinstalling the ram or simply by using a single module at a time, but other that that the device would need service...

• AT200 led flash does not work after upgrade ICS

  Hello!

  I know not why, but after the upgrade to ICS, I realize that the rear camera led flash lights.

  Anyone have this problem?

  Thank you!

  Hello

  Have you tried to reset the AT200?
  Do this

  Check the updates of the Service Station once more
  Someone posted a new update available

• Y50-70 screen flashing when the display of flash content

  Hello, I bought a laptop from lenovo y50-70 about a month ago, model 59445062, and I noticed a strange problem when using flash player content on Web sites. When the battery power, playback of flash content is slow and the screen starts flashing like crazy, especially when you start scroling around the page. However, when I plug the charger in all problems disappear and everything is fast and smooth. Student in computer SCIENCE, I have a hinch that it could be related to flash player and driver of integrated graphics, but the test of the integrated on high graphics demanding applications (games) there are no noticeable artifacts or flashing, even on battery screen. I use windows 8.1 x 64, all the updated drivers to update, flash player update. I hope you guys find a solution to this problem.

  P. S.

  I am also attaching a video of the problem in action.

  https://www.YouTube.com/watch?v=K2PpX0r0Nek

  Yep, just recently received my laptop repair, found to be bad cable of the lcd screen.

• BlackBerry Z10 Z10 led flashing and the software update error code

  Hi, forst time poster and beginner, so please be nice!

  I got a Z10 for three months and today, I could not turn it on and light flashes 1-3-1 sequence.  I plugged on Blackberry link to perform a restore, and I now get an error on Blackberry link code: cannot repair because of the error: BDSLSV2RequestURL.  Any thoughts?  My carrier wants to remove it for repair, but if I can fix it, I would be happier.

  Thanks a lot for your help!

  Chris

  I think that LED Flash 1-3 is a bad battery...

• Screen flashes when the selection in Photoshop CC tool

  Does anyone know why my Windows PC screen flashing when I try to use the selection tools in Photoshop CC?

  Hi - Thanks for your comments. He went on all the selection tools, however I solved the problem by changing the "Advanced Graphics Processor Setting' to 'Base' in Photoshop CC.

  Thanks anyway

• Yellow page flashes when the loading of the Page

  Hi, I made a web guy to make a site for one of my clients, but when the site loads, the background everything flashes yellow high heat and subsequently, each page flashes yellow before it loads as well, but only once. Guy of Web released SWF animations I sent him and the blinking stopped. I gave SWF animations to other web site designers and it didn't happen. Someone would be nice enough to look at the site and let me know if they have any ideas. It is still a work in progress. Here is the link: http://www.trendmultimedia.com/arrowhead3/index.html "> Web site[/ l]"

  Nancy, I can't tell you how much I appreciate you answered with a solution... Thank you, thank you, thank you.

• T430 video flashes when the laptop is moved

  I have a new laptop with Win 7 32 bit T430.

  Since the beginning, I have questions while watching videos on VLC media player or Winamp. The video flickers and gets stuck for a couple of second every time I have to move the laptop on and push.

  I guess it's a hardware problem.

  Hi Fufixa,

  Welcome to the Community Forums of Lenovo!

  I'm really sorry to learn that when you watch videos on your laptop Lenovo T430, it sparkles and get stuck for a few seconds every time that you try to move or to push.

  I would like to inform you that your Lenovo T430 has a technology called Active Protection System. When the protection system detects any movement, he stops to your hard drive and the system seems to be temporarily out of order. The hard drive is less vulnerable to damage when it is not in operation.

  You can manually disable Thinkvantage Active Protection System.Uncheck the "enable Active Protection System".

• How to close a jmf rtp session when the entire file is sent.

  I use jmf to stream a video file from one client to another, everything seems to work fine except for the fact that I don't know how to close the prosessor and the session/datasink on the transmission side when customers the clientis done streaming, I can close lets say after 60 seconds of starting, but I am not able to understand how to stop when the entire record is streaming. I tried to use the datasinklistner when sending the video and the following code

  public void dataSinkUpdate(DataSinkEvent event) {
  
           if (event instanceof javax.media.datasink.EndOfStreamEvent) {
               endOfStream = true;
  
           }
       }

  but the endofstream event is never received from the data source.
  
  the problem is that it works very well if I using 20 second video and I close the datasink and the processor in 60 seconds, the entire file get listened to but if I have a file for more than 60 seconds, then just file is reduced to 60 seconds.
  
  I also tried to use a sessionmanager a sessionlistener and a sendStreamListener with the following code

  /**
       * SessionListener.
       */
      public synchronized void update(SessionEvent evt) {
  
  
      }
  
  
      /**
       * SendStreamListener
       */
      public synchronized void update( SendStreamEvent evt) {
          System.out.println(evt);
  
       if (evt instanceof InactiveSendStreamEvent) {
            flag=true;
            System.out.println("done");
  
  
       }
       if (evt instanceof ActiveSendStreamEvent) {
  
           System.out.println("start");
  
  
      }
      }

  I ran the code and send files and everything, but neither an activestreamevent nor an inactivestreamevent happens but the file is currently distributed correctly

  user13490676 wrote:
  could this be a problem with jmf itself that the endofstream don't get generated for the playing of a file data source

  In this case, that would be the problem... more that likely there is something odd about the file, maybe it doesn't have a duration set in the header and JMF treats it as a live stream.

  You can always write a custom data source that passes right through the entrance of a normal data source and then generate the EndOfStream event yourself... maybe based on a timeout counter or failure? I have not received all the data in x seconds or after x attempts, so I guess that the file is... Or when you have read enough data that the file cannot have more (read > = file header / data file)...