my power green LED flashes and the laptop does not start

Similar Questions

• 15-p151nr Pavilion: Pavilion 15-p151nr dead, power supply LED flashes 3 times but does not start

  With or without the adapter is connected to the computer (well known socket), the computer will not turn on.  The LED located on the left side of the computer where the socket is attached blinks 3 times (white), but does not supply power to the top.  Another post I saw said "continuous" flashing would be the power adapter, but wanted to ensure that it is in fact the problem before buying a new...  Any help would be great!

  Hi @joshuaj21,

  Welcome to the HP Forum!

  It's a great place to find answers and advice! You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums: first time here? Learn how to publish and more

  I understand that the computer will not turn on. However, when you connect the AC adapter of the power port light flashes 3 times.  Please check that the power cord is not one of the recall. HP laptop AC Power Cord Safety retirement program and replacement announced August 26, 2014 .  You use a power bar?  Have you tried a different outlet? Here is a link to the HP laptops - tests and using the AC adapter which can also help.

  Please let me know the results.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution"down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos. : catvery-happy

• 2000-2D02TU HP: HP 2000-2D02TU Power LED power switch but the laptop does not start.

  Someone help me.

  HP 2000-2D02TU Power LED power switch but the laptop does not start.

  What I'm doing.

  Please help me

  Model No. - HP 2000-2D02TU

  Hello @Alok_Bhai,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the laptop won't start does not and wanted to help you!

  You indicate that the lights are flashing, but the laptop does not start?  If this is the case, try to review the following document and let me know how it goes:

  Computer does not start and emits a LED or beep Code

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP dv7-3085dx power light flashes, but the laptop does not work.

  Hello! I have a HP Pavilion dv7-3085dx. It has a hard drive Bay 2.

  Recently, I bought the caddy + cable kit and an Intel SSD. The thing is, when I plug the sata cable to the motherboard for the laptop, and the SSD to it, the laptop does not light. When I press the power button, it flashes once (the power LED flashes once), but the laptop does not light. When I press again, nothing happens.

  I tried to remove the power supply plug, battery and plug it all again, but the power light flashes once (when you press the power button) and no reaction.

  Maybe it's the sata cable: when I remove the new cable and connect the SSD with the sata cable on the 1 hard drive Bay (the cable supplied with the notebook), it works fine. The laptop starts. And when I connect the former sata cable, with the SSD on the second hard drive Bay, it also works.

  I just want to now what is the flashing light means light? Why it does not work with the new cable?

  Thanks in advance! Sorry for my bad English...

  Emilio.

  It is possible that this is a problem with the kit. I would recommend to download and install the latest BIOS update for your laptop, using the download at the following link: http://goo.gl/rbHkg

  If it still doesn't work after that, I would recommend to suppress the kit for a replacement or to try another.

• Satellite L - water damage and the laptop does not light

  Hello

  I don't know if this is the right forum for this, but I was just wondering if someone could give me some advice. My brother spilled some water on my laptop 3 days ago (argh!). He immediately turned off and won't start up again. I stamped it towards the top as long as I could, removed the battery and positioned in a V shape to try to help dry. It is still not started. When I plug in the adapter, the screen remains blank, but there is a very low humming noise and the lights flash:

  The power light flashes green very clearly
  Battery green LED flashes weakly
  The hard drive LED blinks green VERY weakly

  I'm really hoping that the laptop is not dead and I'll at least be able to recover my hard drive, but it seems unlikely. I'd appreciate really any advice that anyone can give me in regard to what could be wrong or how I can fix this problem.

  Thank you for taking the time to read this.

  Hello!

  I agree with Luke and the best way is to contact you an ASP. They can check the laptop and tell exactly which parts must be Exchange or not.
  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  If the HARD drive is not defective, you can backup your data to another PC or laptop as Luke suggested.

  Good bye

• Computers button just flashes and the computer will not start

  Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

  Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

  Hey Bowers

  you get a splash screen on startup with an acer for hp dell etc. or the logo of the motherboard

  otherwise, it would seem that you have a hardware problem

  Contact the manufacturer of the computer or a local reputable computer repair workshop

  Walter, the time zone traveller

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

• Satellite A30 - electric light flashes and the battery does not charge

  Hi guys,.

  I have the model above and recently, when I plug in my power cord to the back of the laptop instead of the usual constant green light loading, the indicator flashes and the light orange low battery always flashes as well.

  I have checked the plug, unplugged the power cord from the laptop and plugged back again but does not help. A few times it started loading so everything went well and now he again refuses to load.

  Any suggestions how I can solve this will be highly appreciated.

  Thank you.

  Dante

  Looks like a hardware problem

  Usually if the power light blinks then it does not sound good because the LED provides an error code which can be read by a technician for laptop

  But before you will contact the technician for laptop for help, try to do it:
  Remove the battery and unplug the AC adapter from the portable computer
  Wait about 20-30 minutes and then reconnect the two parts.

  Then try to turn on the laptop

  If it doesn t help that it s time for the call of the ASP

• Re: DVD recorder has changed and the laptop does not recognize

  I had to change my Toshiba Qosmio F20 portable recorder.
  Now, the computer does not recognize.

  I installed a DVD burner Sony Optiarc AD - 7590 IDE.
  I heard that the problem may be in the BIOS, I have the latest TOSHIBA for this laptop (which is installed V.1.40 2007) and the recorder comes with the manufacturing date of 2009.

  I currently use Windows 7 on this computer.
  Is it only possible for the computer recognizes it, "any driver or driver I install?

  Hello

  Talking about this laptop doesn't recognize, do you mean on the Bios or Device Manager or both?

• laptop screen does not light and the system does not start most of the time.

  my hp g62 lptop started not starting and the monitor not turns sometimess even if it lights. with the time he had this problem more frequently. now it does not start and the monitor turns at all.  It will fuel yet but it's going to be okay. Ive tried a recovery disk, but it does not start the machine or be the monitor lights. im a beginner so any help will be appreciated.

  Hello

  This may be a trial outcome disply to connect an external monitor to your laptop and see if you get display it.

  You can connect to an external monitor via VGA or HDMI connection.  The usual process to transfer the video output to an external source is to press and hold the fn key and press f4.  Use the arrow keys to select "Projector" only and press ENTER.

  http://support.HP.com/us-en/document/c02013758

  and I also found some links that may help you

  http://support.HP.com/us-en/document/c01884928

  http://support.HP.com/us-en/document/c01443371

• Pavilion g6: on the laptop does not start...

  My computer hp laptop pavilion g6 have big problem of 2 weaks...
  First of all, they was directly cut working 25 to 30% battery level indicates without.
  Then in the last 5 days, they went to the startup problem
  And white screen... any time they start, but after 2 min keyboard or the cursor is a not working properly... some time say to prepare the satarting but does not start...
  I'll try all the formulas of yours but not working...
  Start the computer laptop led light still
  Led light also on but near the power light has no power continuous blink... That's the problem... Please help me as soon as possible...

  What is supported of these problems...

• Compaq Presario CQ60-425SL: recharge the battery but the laptop does not start

  Hi, I tried to clean my laptop fan, because on the CPU temperatures up to 90 degrees Celsius. But after the opening of the laptop, clean the fan and put all the pieces together again once, it does not start. The led near the power cord plug is on, and the other indicating that the battery is also on. But when I press the power button / nothing happens. All cables and screws are in the right place. Model of the laptop Presario CQ60-425SL. Thank you!

  @georgedragan,

  Hello and thanks for the display on the HP support forums.  Here is the link to your maintenance and service guide.  What you can do, is use to open the new system and each point using the guide to make sure that everything goes back together in the right place.

  Compaq Presario CQ60 Notebook PC HP G60 Notebook PC Maintenance and Service Guide

  If you still experience problems at this time where the only option would be to contact HP support for service options.

  Use the following link to contact the correct service.

  Connect with the HP Support

  Please let me know how things are going.  Thanks again for posting and have a great day.

• I get the error stop: 0x0000c1f5. Found a fix from Microsoft, but can't use it because the laptop does not start.

  Windows Vista Basic
  Computer laptop bluescreens on startup with the code 0x0000c1f5.
  Laptop does not completely start using installation CD.
  Downloaded a patch to fix this problem, but can use it because the computer will not start.

  How your question about Windows Update? SP1 or SP2 is installed? Is the computer still under warranty or Service contract?

  See the workarounds here: http://support.microsoft.com/kb/946084 ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• 0X803C0107 error: you cannot access shared files and printers and the MSE does not start at startup

  Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Error 0X803C0107

    Details of the editor for Windows Firewall troubleshooting

    Verified issues

    You cannot access shared files and PrintersYou cannot access shared files and printers

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked

    No workingRemote Assistance remote assistance does not

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked

    Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked

    Windows Firewall service is not his firewall service is not started

    Windows Firewall service is not running or is not started. Checked

    Issues checked the details of the detection

    6 you cannot access shared files and printers checked

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.

    Unlock the file and printer sharing in Windows Firewall works not

    To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.

    6 remote assistance works not verified

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.

    Allow Remote Assistance in Windows not running Firewall

    Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.

    6 Windows Vista could not start Windows Firewall check

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.

    Set permissions for the registry keys concerned not run

    Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.

  6 Windows Firewall service did not start Checked

  Windows Firewall service is not running or is not started.

  Start the Windows Firewall service is not running

  Start the Windows Firewall service solves this problem.

  Details of detection

  Collection information

  Computer name: NORMBRESINSKI

  Windows Version: 5.1

  Architecture: x 86

  Time: 09-20-2010 07:51:49

  Publisher details

  Troubleshooting Windows Firewall

  Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work

  Package Version: 1.0

  Publisher: Microsoft Corporation

  You have problems with programs

• Error messages
• Recent changes to your computer
• What you have already tried to solve the problem

Hi Rickbsk,

You can check out the link and check the suggestions provided by scotty1294.

http://social.answers.Microsoft.com/forums/en-us/msestart/thread/05a63b12-1be9-4BD3-898e-64674c1e9afd

If you have not tried all the suggestions above, try and see if it helps.

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Just renewed my membership to the Muse and the program does not start, what can I do?

  I changed my billing data, the charge was made, but just Muse does not start. It is for me the survivor of the screen of your subscription again and again and again. What can I do? I have an urgent job to do.

  Refer to this:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Delete the old information in the OOBE and SLStore folders and connect again.

  Mylenium