LaserJet CP2025: My computer did an update of Windows 10 and now I can't do duplex printing CP2025

Similar Questions

• My computer turns off during an update to windows xp and now windows xp will not load.

  My computer turns off during an update to windows xp and now windows xp will not load.  It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options.  I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive.  I have the product key, but I don't know where or how repair the operating system.

  Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.

• Just did the Lightroom update to 2015.4 and now I can not launch LR. "Met Lightroom user authorization problems."

  Just did the Lightroom update to 2015.4 and now I can not launch LR. "Met Lightroom user authorization problems." I hit the repair button continue and I get a message that Adobe is unable to solve the problem, I have to do it manually. I followed the steps to allow permissions for preferences and Adobe and Caches and always LR launch. Help!

  Hi Mariej,

  If please check the following link and let me know if it helps: Lightroom has encountered problems of the user's permissions. Bridge of Photoshop Lightroom crashes or hangs at the launch

  Kind regards

  Tanuj

• I updated my iPad today and now I can't get cellular internet. Can anyone help please?

  I updated my iPad today and now I can't get cellular internet. Can anyone help please?

  It is a bug in 9.3 and persists in the 9.3.1

  to get back to be

  1. turn off the power, remove the sim card, reverse and insert sim card when asked. Or

  2 disable cellular data, mode airplane and then turn off. Wait about 30 seconds and then turn it on turn off the airplane mode and then turn on the cellular data. He must find it.

  but this is only a work around.  If you turn off again, you will have the same problem and her you need to repeat the steps above.

  Good luck

• My computer have Windows reloaded and now I can't access my e-mail stored previously in Windows Mail. How can I get back them?

  My computer have Windows reloaded and now I can't access my e-mail stored previously in Windows Mail. How can I get back them?

  You can try to search for *.eml, but if the disk has been formatted first, they will not be there.  The files are also hidden, so make sure that you enable the display of hidden files and folders under control panel | Folder options | View.  You can also check with those who 'reloaded' of Windows to see if they have backed up your data first.

  See www.oehelp.com/backup.aspx#wm for information on the message to save the data.

  Steve

• I reinstalled Windows Vista and now I can't run "repair your computer".

  I reinstalled Windows Vista and now I can't run "repair your computer". I need to do this because I'm missing a few scripts.  What should I do to fix this

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• I've updated my Photoshop CC2015 and now I can not open RAW files.  Someone knows why

  I just updated my cc2015 Photoshop and now it is not allowing me to open RAW files.  Someone has an idea of what's going on

  Thank you.  I have re-installed this morning and after that I read your answer I checked and this is so I tried again and it works now.  Thank you very much.  Apparently the relocation took care of her.  Thanks again

• Did the update to Firefox today and now problems with Comcast

  I did the update to Firefox today. I am able to connect to Comcast, but can't stay connected. I go to the home page, it tells me that I'm not connected, so I go to the log in page, log in, and it brings back me to the home page showing that I am connected. When I try to access my emails, instead of taking me to this page, it just brings back me to the log in page. It also does it when I navigate anywhere on the site. Help!

  This can be caused by corrupted cookies.

  • https://support.Mozilla.org/KB/fix-login-issues-on-websites-require-passwords

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

• My Windows 7 computer updated automatically to IE10 and now I can't "change colors of window glass. Why is this?

  I used to have the ability to "change the color of glass windows", but since the upgrade only option IE10 disappeared.  My Start menu and taskbar is now a clear blue color with white txt which is difficult to read.  Any ideas?

  Thank you!

  If you have updated your Windows then uninstall the update of platform for Windows 7 (KB2670838) and your problem should be solved.

  Before I updated my Windows this month I just checked if Microsoft still offer this update. This is in the optional list. I installed so I thought to manually upgrade to IE10 because he wasn't in the IE9 update list. So I did manually and after that check updates again and to my surprise this update has disappeared completely. I have an old PC as well, and after installing all the updates I still have no problems so far.

• Firefox update has just finished and now I can not restart Firefox. Get the error message "Cannot find the duration of mozilla"

  Automatic update of Firefox has just finished. After the update update, tried restarting firefox and I received the error message "cannot find mozilla runtime" I tried to restart the computer, but it did not help. How can I fix this so I can restart firefox?

  Hi rjadja, please see if it does not work properly after reinstalling firefox with the full installer instead which can be obtained from https://www.mozilla.org/firefox/all/

• Updates of windows installed and now unable to get online with the Explorer.

  I am running windows vista and installed updates and now cannot get online.  I tried to run the system restore, but that did not help.  This happened once before when the only web sites that I could access were secure web sites, I have changed the security settings and that fixes the problem.  Nothing works for now.

  I'll get more info from my computer at home tonight and add to that tomorrow.

  Thank you!!

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  =========================

  Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the webpage".
  http://support.Microsoft.com/kb/942818

  If not help to tweak the parameters of your third-party firewall, try the following:

  1. disable your antivirus, all modules of Norton (as applicable), a real-time protection provided by an anti-spyware application (with the exception of Windows Defender; includes the Tea Timer of Spybot, AVG AS guard.exe, SpySweeper guards, etc.), disable the third-party firewall AND THEN select Windows Firewall.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) except #4 below until your antivirus application has been reactivated!  If you use a free ZA firewall, you may need to uninstall instead of disable.

  2 uninstall 'update Cumulative security for Internet Explorer 7 (or 8) for Vista (KB976325)' or "Security Update for Microsoft Windows (KB976325)" via start | Control Panel | The Maintenance and the system (if you use Classic view, skip this step). Windows Update | Installed updates day & reboot.

  3 d - c #1 above.

  4 manually run Windows Update and install important updates available (i.e. KB976325).

  5 reboot & make sure everything in #1 above is on again and, if necessary, disable the Windows Firewall and enable (or reinstalling) your third-party firewall.

  =====================================

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 53 updates to Windows Vista and now screen keeps saying that it configures updates, then it restarts and the wont do anything else

  After using no not my laptop for some time, I turned on and 53 updates to Windows Vista. Went through the whole process, then got to the updates configuration screen and the laptop keeps restarting and it won't do anything else.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  ___________________________________________________________________

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Windows install the latest updates on my phone and now I can't access the internet

  Windows Installer automatically of updates on my computer and now even if the system connects to the wireless network and I have only local access he has no internet access.  I tried both with the wired and wireless options and nor will not work.  Everything worked fine until the update system - do not know if I have to do a system restore to when he installed updates (I tried to restore to a point a few days before the download, but it failed) or if I should try to uninstall updates.  While I am not very confident with the work on the computer would like some advice on the best way to go.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Set to update to Windows 10 and now Acrobat looks terrible

  B4 I start, the forum said: 'Acrobat Installation & update questions' but once I click on it it says, it is only for "installation and update of the issues". My question is not on the installation/update, but it is a problem of installation of a sort. In addition to the fact that no other forum here is so I have no choice but to ask my question here. I hope I'm not mistaken.

  I just upgraded to Windows 10 and PDFs look awful - this is the case for my Adobe Acrobat CS 6 Pro and Adobe Acrobat Reader DC. Please note that I have no other problem of reading software on another text (or images) and that the same pdf reads fine in my browser. can anyone help? (well this forum reads gray rather than black, but maybe it's a setting I have somewhere I would guess, if it is please let me know this as well.)

  Thank you

  Hello

  I had a similar problem where the fonts showed very pixelated, after that I have upgraded to Windows 10.  For some reason any text 'smooth' set default to 'None' (Preferences > Page Display > rendering > smooth text)-I've now changed this setting to "Monitor" and it seems to have solved this problem...

  You're not sure if it's the same problem that you have experienced, but may be useful to check your Page display preferences?

• I have Word on my old computer with the update of Windows 10 and documents located in Acrobat.

  I have MS Word on my old PC with the upgrade of Windows 10. I transferred a document to my new PC and when I try to open the doc with Adobe Acrobat I get a message that it cannot be opened. My new PC has Windows 10 family as the operating system. I have Adobe Acrobat Reader DC on my new PC. Why Acrobat won't open and allow me to edit the doc? Do I need a different Acrobat?

  Adobe Reader does not allow to edit PDFs. Newer versions of Word can open PDF files and convert in Word for editing. What are the versions of Word and Acrobat Reader you are using. Many items are specific version.

  Acrobat is a sold computer program be Adobe not a file of type format.

  PDF is the file type read only Acrobat (paid product) or Adobe Reader (free product).