LaserJet m1212nf MFP not recognized by OSX 10.6.6 for scanning

Similar Questions

• New Laserjet M1212nf MFP does not copy or scan. Not taking in the documents document feeder

  Product: Laserjet M1212nf MFP

  OS: Windows Vista 32-bit, Windows 7 64 bit

  USB 2.0 connection

  Scan software Readiris Pro

  Have installed a new Laserjet M1212nf MFP. When I send a document to print, it produces an impression outside, well wrapped on the ends because of the heat.

  The copy function and the scanner or never do not produce print outs. The bar with light moves on the copy/scan with the light area, but no print out.

  In addition, for the copier/scanner document feeder does not pages.

  I installed several LaserJet using a number of operating systems in the past.

  Best wishes

  Shanefg

  Hi Shane,

  Thank you for the additional information. You experience a hardware problem with the scanner in the printer mechanism. The following additional options depending on your current status of the warranty on this printer.

  In the guarantee:

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Out-of-warranty options:

  http://support.HP.com/us-en/document/c02652026

• LaserJet M1212nf MFP: Spring / roll jumped out of scanner flat.

  I had a paper jam while I was scanning several sheets in the feeder.  I opened the lid of the scanner and a spring / roll came out.  I am still able to print and scan from the tray, but I'm not able to use the charger.  I have attached a photo of the piece that jumped.  Anyone know where it's going?  Thanks in advance.

  

  Hi @deejaygreg,

  Welcome to the HP Forums!

  I see that a roll of spring/jump our of your HP Laserjet M1212nf MFP printer. I'm happy to help you!

  The only suggestion I have for you is to please contact HPtelephone support for further assistance. To repair the printer / or replaced. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  I hope this helps!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• LaserJet M1212nf MFP: How can I download a driver for Laserjet. The site seems to be an endless loop

  I try to use my Laserjet M1212nf MFP as a scanner.  I'm trying to download the driver so that I can do.  Currently, I can only print and copy.  When I use the hp Web site, it asks for my product, and then when I select it I'm directed to a picture of him and it is said below download drivers that takes me back to find my product.  How do the driver?  How can I use my Laserjet as a scanner?

  I found the HP folder and was able to scan.  It has not put an icon on my desktop as did my previous installations.

  When I talked to support the HP told me they had technical difficulties with the Web site.  They site immerses you in an endless loop.  If you need support you can call them direct to the 1-800-474-6836.

• HP LaserJet M1212nf MFP: Printer continually initialization. Prints, but don't copy.

  Why my printer HP LaserJet M1212nf MFP (personal information) print but not copy and continually to initialize?

  Hello @PSFforever,

• HP Laserjet M1212nf MFP professional

  I have a HP Professional laserjet M1212nf MFP. my computer is connected to the network and my printer eprint as well. I am trying to open my eprint printer Hp web services but it does not open, but it is re - lead me www.hpeprintcenter.com.

  Please how can I activate my eprint printer HP web services?

  Thank you

  I await your response.

  Hi philip24,

  Welcome to the Forums of HP's Support.  I understand that you get redirected to HP ePrintCenter trying to enable web services for your Laserjet M1212nf printer.

  Your post leads me to believe that your printer needs a firmware update, so I've included the document Getting the latest Firmware and updates to the product .

  Once the printer firmware is up-to-date, you should be able to get operational web services. If this isn't the case, please let me know at what stage things are ugly and the content of any error message.  Also would you please let me know which operating system you use on your computer (whatsmyos.com)?  Thank you.

• Ink cartridge Laserjet M1212nf MFP and I get error message "install black cartridge.

  I have installed and reinstalled the ink cartridge black for my Laserjet M1212nf MFP and I get error message "install the black print cartridge.  I pointed out quite in the restart including manual online, the fact to unplug printer, etc..

  Help, please.

  This error of "Install black cartridge" is usually caused by a piece of packaging material that remains on the cartridge. The document below should help you to solve the problem. If this does not work, try to do a hard reset. If neither works, let me know.

  Toner blinking or 'Install black print cartridge' Message is displayed on the control panel:
  http://goo.GL/Nlqpg

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• HP laserjet m1212nf mfp printer: HP laserjet m1212nf mfp printing issue

  Hello world

  I have a strange problem with my HP laserjet m1212nf mfp printer after updating to Windows 10 on PC1

  Updates are made, tried to reinstall ect.

  Now, when I tried to print it says required attantion

  But if something is that on PC1 and I decided to print from another pc and any operating system then Quebec on the prints of PC1.

  Any idea what could be the problem?

  I also ran problem solver and Diagnostics for windows 10 and HP (doctors ' something tool ') cant remember the name

  Help, please!

  Thanks for the help everyone, I managed to solve the problem.

  The soluction (Windows 10)

  Uninstalled the printer one again, then when you search for printers I chose that the printer was not on the list (although is has)

  Installed by using the IP address of the printer, after that, it will ask if you want to keep the driver or replace by the network (that) printer and success problem printing free driver

  In the future no update new printer

• LaserJet M1212nf MFP prints on labels

  My Laserjet M1212nf MFP will not be printed on the labels. Select 'labels' as the paper type, I get the large popup telling me to load support.

  I use Avery 5160 labels

  I can print the same labels on plain paper without problem.

  Hi Michel,.

  When the printer is set to the current settings and receives a request for the written press which is not currently installed and configured in the printer, it will prompt you can load the media is requested to print on.

  According to the description, it seems that the printer has not said the type of media that is loaded in the tray.   When he thinks that the driver you select labels, the printer itself, it commissioned from plain and requests that you load the labels.

  The following is a section of the User Guide. On Page 57 there are instructions to change the setting from the default document type.  If this setting is changed to 'Labels' and 'Labels' request from the driver, you should not get the prompt on the control panel again.

  

  Please try this and see if the prompt disappears.

• Help! LaserJet M1212nf MFP

  Hey.

  I have HP LaserJet M1212nf MFP AllInOne baought ricently.

  when im trying to scan, if its with the charger or glass, is comeout as Mirrowview page scanned.

  when im asking him to pruduce as a MirrorView is just won't come out.

  I have updated and softwere of hp.

  im a 32-bit Windows 7 user.

  you have a solotion for this problem?

  Hello

  It is a software problem known with the alignment from right to the left of the preview of the scan, it only affects the preview screen , but the analysis results will be as expected.

  Once the mirror preview appears. do not duplicate the preview but complement the analytical work... the results of the analysis will be as expected.

  To completely resolve the problem, you can uninstall the HP software, change your PC Non-Unicode affecting English and reinstall the HP software. Then the HP software will appear as English and not to see him get an overview of the analysis as a mirror image.

  Shlomi

• change the display of the Chinese language to English on LaserJet M1212nf MFP

  Hello

  How do you change the display of the Chinese language to English on a LaserJet M1212nf MFP printer?

  its screen was English before but someone changed the Chinese and we do not know how to change the display in English language

  Hello

  Please, try the following steps:

  • Press the power button to turn the product on.
  • On the Control Panel, press the Setup button to open the main menu.
  • Press the left arrow key three times to select the system setup and press OK. The language option opens.
  • Press OK to open the language menu.
  • Press the right arrow key to select the language that you want to display, and then press OK.
    Press the back button to return to the main menu.

  Kind regards.

• LaserJet M1212nf MFP output bin extender

  The LaserJet M1212nf MFP comes with the output tray Extender indicated in the installation guide? I could not find in the shipping box.  It maybe unfold some compartment hidden in the body of the printer?

  Hello fizzix2002,

  Yes, the output tray Extender will be delivered with the unit, inside the box and must be installed after unboxing conversion (described here as the fourth step).

  Should be stored separately somewere inside your box, as for example the power cord and visible, it is not that small.

  Best regards

  AndOne

• LaserJet M1212nf MFP

  Why a print a file driver HPIII HP4 or HP5 HP6L printing when it is sent programmatically to a LaserJet M1212nf MFP?

  I have installed each of the HP LaserJet mentioned above, while they would feel in a file.  I'm testing a software that transforms the raw data to a PCL printer.  Only one file printed to the M1212nf print correctly.  Other files appear in the print queue, but never print.

  Hello

  Any printer PCL as mentioned above cannot be used with the Laserjet M1212 that isn't a PCL printer.

  The Laserjet M1212 supports printing Hostbased, not the PCL5 and PCL 6 printing language language.

  You can find the data sheet below, within the LANGUAGES of PRINTER STANDARD section:

  http://www.shopping.HP.com/shopping/PDF/CE841A.PDF

• Pavilion 550-122nd: Laserjet 1018 is not recognized in Windows 10

  LaserJet 1018 is not recognized in Windows 10 of 155-122nd Panilion.

  The "result of software and driver for laserjet 1018' has not failed (new driver)

  USB ports active aere

  Do I need a new driver for Windows 10?

  Is a new availabe driver for Windows 10?

  Thank you.

  Hello and welcome to the community of HP @Rikkie1,

  I understand that you're having trouble installing the drivers for your HP LaserJet 1018 on your computer Windows 10. I will do my best to help.

  Only the integrated Windows Print Driver is compatible with the HP LaserJet 1018 on Windows 10. Below, I have posted a link to a document that has some instructions on how to install and use the integrated Windows print driver. Please try all the steps in order and get back to me with the results.

  HP print driver printer - install and use the built-in Windows

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• LaserJet M1212nf: HP LaserJet M1212nf will not print, claims paper jam

  My LaserJet M1212nf do not print, and it has never printed. Whenever I have create a print job if printing from a PC, copy something via the scanner, or print a report in the menu, it goes through the following:

  1. Initializes the printer,
  2. During initialization, printer pulls in a piece of paper in the tray,
  3. Paper stops halfway in (seems to me like he already spent fuser, then probably would not print correctly in all cases), then the printer claims there is a paper jam.

  Note, this printer has never properly printed a single page. The number of impressions is zero (0). I've never had a paper jam.

  Note that regards the position of the paper as it is pulled into the printer, I use letter size paper, and the printer menu shows that it has set up to accept size stationery. I confirmed duplicate by checking through the web interface of the printer as well.

  Any help?

  And CV: If I can't get this problem solved, I'll have no value outside of this all-in-one at all. It will have been a large lemon and probably will poison any possibility to buy HP products in the future, including those based on the experience of support I've had so far, which has been zero. I tried to get the official support of the guarantee, but despite me documented proof of purchase, my warranty has been backdated to a until I bought itand now I can not contact technical support via the Web site options. I put in another conflict guaranteed, but on the basis of the likely response time will not get an answer until after a guaranteed year is officially over.

  Gary Dee
  wiseintro.co/deeabson

  Hey @Dee76,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions. Please see the HP Privacy Statement.