LaserJet M602dn print on the front and back instead of simplex
Having a strange problem with new m602 series printers.
A form (2 pages) is sent to the printer. on LJ 4100, 4300 and 4015 everything is printed as usual with two sheets of sepereated.
But when you print the printjob even with the same settings on a m602dn printer configured to behave like the others, the STI document printed in duplex mode.
I stopped to check a print job to the print queue of the printer there it says no duplex is enabled - on the printer itself settings say "duplex unit: installed - as we also print duplex jobs if these are defined as such.»
Why the new printers don't print job settings?
Or is it a new setting that would explain this behavior?
PS: testing the lates firmware version...
Thank you very much for your help.
other printers of course are all two-sided. As you wrote that the text prints by default using the printers I looked inside again and I found my solution:
In "Bedienfeld-Administrationsmenu' - 'Standarddruckoptionen' there is a new parameter called 'Seiten' (pages) - this can be set to 2 or 1 - by default it is set to 2, so I think it means front or front for printing uncontrolled.
Sorry, I do not have the translation English enabled on the printer - so maybe someone can translate the menu equivalent entries.
After changing, it prints the document appropriate on pages separate and not more than duplex. Double-sided print jobs are also printed in duplex.
Tags: HP Printers
Similar Questions
-
HOW TO PRINT THE FRONT AND BACK (DOUBLE-SIDED)?
How can I print on the front and back? Help, please!
Hello
It depends on the software and the printer you are using.
Probably best to check with the manufacturer for these two and the specific forums Support.
If it's in a program Office control with the Experts of the Office here: (re - ask your question in the appropriate groups)
Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxDiscussions in the Office Setup program
http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.Setup&lang=en&CR=us
OrWelcome to Microsoft Discussion groups
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?GUID=1A61081E-1F66-5F7F-B5BA-04767E55A63BMicrosoft.public.office.setup discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=usPrinter manufacturer you will also Support, documentation online and possibly forums for help.
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
by aligning the front and back of the cards to collect
I designed a model of 2.5x3.5 9 cards to Exchange, but when I take it the printer front and back are not aligned. Can someone help me to align the front and back. When I print on my printer, they seem well but when I take them to printing, the alignment is off. Need help!
It's weird.
What is the difference?
Viewing at 100% in Photoshop?
You provide the printer with a PDF file? (I had some strange things happen with PDF on more than one occasion.)
Did you use guides to align layers/objects?
You flatten the output file?
-
change suddenly in the front and back with Word 2010 and JO 8600 Pro printer
I have been successfully using Word 2010 and my Officejet Pro 8600 - to set duplexing if necessary.
I used printing without margins to print 8.5 X 11 brochure and was happy with the result (no white space on both sides).
However, this somehow messed up the original settings and I am unable to print in duplex mode now. The only option is "manually print on Both Sides.
Help!
Sunshyn, I can still double-sided of MS Word my other printer... I have a Canon laser as well.
I have Windows.
I think I have the solution... I couldn't change the settings of the print window. But I did enter the printer via the control panel and found the same parameters, but also found the apply"" button. Then I "applied" my desired settings and things are fine.
However, it is a little confusing because he wasn't the "Apply settings" button in the menu printing, so wouldn't change.
Now I know that go through the menu of the printer, the print document settings.
Thanks for following up... I think I'm OK for now.
-
Problems with the movement of the front and back layers
Hey everybody!
I am very new to Flash, very very new to actionscript and basically, I started programming in general 2 days ago, and I have a problem with the layers in a project. I tried learning through books, but especially thanks to youtube tutorials, but I'm stuck here.
Here is the .swf file: http://dl.dropbox.com/u/14319641/Flashprojekte/Variuscard%20Headertest.swf
And here is the original .fla file: http://dl.dropbox.com/u/14319641/Flashprojekte/Variuscard%20Headertest.fla
Two problems:
1. I want maps to fly BEHIND the Logo, but in front of the shadow - so that it seems that the logo is original and the rest (maps and shadow) is in the back. I have 3 layers (Logo, Action, shadow), but no matter how to move around it do not go to the back...
2. I would like to have a second fountain Let's say right left... can I just copy and paste the code? Seems similar is not...
Can someone help me on this one? Pleeeeez ?
Mike
To create an empty movieclip you just select Insert-> new symbol and select movieclip and click OK. Simply exit the editing for this movieclip mode by selecting Edit-> Edit the Document. You now have a new empty movieclip in your library.
With the desired layer selected, drag an instance of the movieclip in the library in the upper left corner of the stage and then give it an instance name of "mc" in the properties panel.
I have no CS5.5, so I don't know if what I described in selecting is changed in the new design.
-
I can't make a duplicate with one copy double-sided Control Panel of the printer using the COPY function. It does not show an option for 2 original face 2 face copy. The printer has a duplexor unit installed, the latest firmware, but the option described above does not appear on the printer Panel option "double-faced." I prefer not to repeat the flat glass scan - Tower and the tests to get a copy of face 2. The printer has no problem filling a two-sided printing function. What can I do?
Sarge-5
It's one of the limitations of the 8610 compared to 8620/8630.
-
diplay is superior to the front and back screen
original title: need help with the appearance
My kids were playing on the computer and before my windows fit perfectly, but now everything is bigger and do not fit properly. How can I fix it? I have tried everything I know!
Right click on a space empty on your desktop and select Properties.
Click the settings tab.
Drag the "Screen Resolution" slider to the right. Do it slowly until you get the look you like. -
Use of the front and back buttons on the ergonomic keyboard 4000
Title: Back and forward buttons
What to do the back and buttons before just below the SPACEBAR of ergonomic 4000 keyboard. Nothing in the manual about what they are for, when others touch programming that they are not listed. And when I press on them, nothing happens. I run windows 7
Title: Back and forward buttons
What to do the back and buttons before just below the SPACEBAR of ergonomic 4000 keyboard. Nothing in the manual about what they are for, when others touch programming that they are not listed. And when I press on them, nothing happens. I run windows 7
have your help I tried before and buttons to the rear while a Web browser, or an image viewer is open?
-
How can I print front and back (double-sided)?
I hope someone can help me... it's a very simple procedure that I do not know how to do it on the new vista software! Help! Everything I need to know how to do is printed on the front AND back. In my office, no one can understand it... Help, please!
This is a question for the manufacturer of the printer - printing on two sides of a sheet of paper is usually controlled by the printing software and drivers. As you don't know the brand, model and version number of your printer, I can't provide you with a link to their support site (but it should be pretty easy to find).
Here is a generic article on printing double-sided in Windows: http://www.ehow.com/how_2253127_print-double-sided.html.
Here is another article on printing double-sided in general (the configuration of the laptop) and in Word and WordPerfect: http://www.law.duke.edu/computing/printing/doublesided.
Here's a last article on how to print two-sided manually (assuming you do not have the equipment to do it automatically): http://h71036.www7.hp.com/hho/cache/548309-0-0-225-121.html.
I hope this helps.
Good luck! Lorien - a - MCSE/MCSA/network + / A +.
-
Double-sided printing. The different margins top, front and back
I'm tying to print the aWord 2013 document on A4 sheet, double-sided, on my envy of 7640, now my Windows 10 pc.
I played with different sizes of margin and sometimes the text at the top of the page is missing or text starts at least 30 mm from the top of the cover page. Still back starts about 7-8mm from the top of the printed page.
I can't say with certainty that it is since the free update of Windows 10, but he printed double-sided OK in the past.
I have not modified parameters, only diversity of margin sizes when creating documents.
Hi @crag67,
I understand that when you print from 2013 of Word by using the duplex function, the margins on the front of the page and the back of the page are different. This happens when you print from other programs or just the word? If it occurs with other programs, it could be the driver, but if it occurs only when you print from Word, Word or a framework within the program, in which case I suggest reaching out to Microsoft or the Microsoft community.
If this problem occurs when you print from several programs, we will remove the driver and re - add new.
I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server.
-
HP Officejet Pro 8625 cannot change the order of printing back to the front and want to change
The Officejet Pro 8600 driver has a 'Page order' option in the driver, and it is compatible with the Officejet Pro 8625. You can install this driver in point 8.1 of Windows as follows: first download and install the driver Officejet Pro 8600 from HP here. When the installer asks how the printer will be connected select "ignore the connection at the moment, I'll do it later." After that go to printer and devices, right click on the Officejet Pro 8625, printer, advanced, pilot, new properties, then select a manufacturer HP (Hewlett-Packard) and select HP Officejet Pro 8600, next, done. Click the Officejet Pro 8625 properties, general window and in the rear upper part called Officejet Pro 8625 (or what you want the printer named...), OK. The Page order option will be available in the Advanced Printer Options tab.
-
How to add a Groove to the page front and back?
I already created my front and back pages with a spline, but now the printer says they need with a Groove of 10mm for the back and the front pages. I have no idea how doing this and can't seem to find any mention of adding to my design.
Please, I would be very grateful if someone could help me with this.
Thank you very much
Susan
Just to note - the picture of the book, the Groove refers to the line on the front cover (not the fold on the side).
-
How can I keep at the front and the back of the picture together in a single image?
I'm under PSE 8 on XP with SP3.
I'm about to switch to PES 9.
My cousin sent me 24 old family photos.
On the back of each photo is a lot of information.
Who is in the picture, where it was taken, what the event was, etc.
I want to be able to do is to analyze these images to keep somehow the front and rear of the
each picture in a single image. That I can post them to a site web picture and people
can look at the picture and read what it is.
I have a Lexmark Pro 205 printer/scanner.
Thanks for your thoughts and suggestions!
Randy,
Download this set of brushes (Return to Eden) cloud since the Adobe Studio Exchange website.
Once you have installed, access a clouds brush as you would for any other brush
- Open an empty layer above your picture
- White foreground color chip set
- Click to add a cloud in the sky
- Adjust the opacity of the layer function.
-
create bookmarks for the front and the back of the cover
Go easy on me please I tried for two hours to do this simple thing! (At least, I assume it's simple).
I try to add bookmarks to the front and the back of the cover of documents. The coverage is obviously the first page (always!) but the rear hull could be any page number, according to the document. Curiously, I did a before work for the calculation of the last page and this isn't my problem.
In any case, of hackering autour with stuff in the javascript reference and some tutorial, I so far have this:
var plan = this.bookmarkRoot;
myRoot.createChild ({cName: "Front Cover", nIndex: 0});
myRoot.createChild ({cName: "Back Cover", nIndex: 99});
Thus, this creates two bookmarks where I need them, 'Coverage' at the beginning and the 'cover' at the end of the bookmarks already in the doc. Obviously this works only because the number of 'already' bookmarks will never exceed 99, but it seems to work ok!
In any case, my problem is that I can't work a way to set the destination - for the life of me I'm sorry I read the docs, but my experience is limited I think it's almost impenetrable. I think that this should be simple, because the cover should always point to page 0 (in a zero index) and I'm not only bothered about 'back' because I can reuse the code because I have to work on the number of the last page. So if someone could help me by telling me how to set the 'cover' down on the first page (0) when you click on - I can go to bed at a decent hour!
When you create a bookmark using a script you can define its action to a script, you can use something like that to the front page:
myRoot.createChild ({cName: "Front Cover", nIndex: 0, cExpr: "this.pageNum = 0 ;"});})
Moreover, instead of using '99', use this code to always create the bookmark back cover as the last of the list:
myRoot.createChild ({cName: "Back Cover", nIndex: myRoot.children.length});
-
This unit can perform a copy front and back on a pile of documents front / back, loaded in the ADF? (I know that it is able to copy both sides of a single page).
In the list of options in control panel touch control for "duplex", it has classified 2 options from which to choose:
1 - face to face 1
1 - face to face 2
It seems that I need a "2-sided to 2 faces" option, correct?
It seems that the device must be capable of 2 faces double-sided COPY and more double-sided printing.
I tried several combinations of different settings but cannot figure it out (if it is even possible) to take a stack of documents face 2. Put them together in the ADF and the output device an identical pile of copies 2 faces.
Thanks in advance for any help/suggestions.
Hey @AA10,
Welcome to the Forums of HP Support!
I see you try to double-sided copy on your HP Color LaserJet Pro MFP M277dw. There the duplexer to print system which allows you to print 2 sides, but does not have a duplexer built-in automatic document feeder. That's why you miss the 2 head to head 2 under the menu copy option. The two-sided to 2 in the menu copy allows you to copy documents two unique faces the printer would then print 2 sides. You must copy a page at a time and return them to make Copies in duplex.
Please let me know if you have found this information useful.
Maybe you are looking for
-
Used iPhone, how do you know that it is original?
Excuse me, I'm going to buy an iPhone used 5 for someone, how do you know if it is original and not a copy of high... and if possible how do I restore the phone to be as if I just bought new? Thank you very much
-
Satego X 200 21U: drive HARD internal not external usable after upgrade
First, I changed the system to a 500 GB HARD drive, and everything was good. The old drive was not usable extern, so I left it as an emergency backup device.After a few weeks, I did the upgrade even to the second HARD drive, and again the old drive i
-
ICloud storage details are currently unavailable. Try again later.
Hi people, I tried to upgrade my plan of storage iCloud for a week now and continue to spread the message. I tried to sign on iCloud and re-booting the phone - but the problem continues - in fact I can't disconnect from iCloud. When I try to disconne
-
Upgrade memory in my G62-264 ca of 4 GB to 8 GB
Hope I can find help here, I did a scan with CPU - Z to get information about the currently installed memory. The test said I need a memory with a CL of 7, below is a CL 11 will it still work? Also system properties says it has 3.74 usable space. I t
-
A510 Photo smart printer: A510 Photo smart printer error: cartridge failed
This is actually the third part I write to. I have not received all the answers in the other two sections, so I thought that maybe I posted in the wrong section. I'll keep it quick. I have a Photosmart A510 printer that I bought a new cartridge to