HP Officejet Pro 8625: HP Officejet Pro 8625 impossible to change the order of printing back to the front and want to change

Similar Questions

• I have paid the monthly fee and have been using Acrobat Pro DC.  I had a problem where I broke my previous laptop and want to continue to use this product.  I bought a laptop and I don't know how to download the program without havin

  I have paid the monthly fee and have been using Acrobat Pro DC.  I had a problem where I broke my previous laptop and want to continue to use this product.  I bought another laptop, and I don't know how to download the program without having to pay again.  I pay $14,99 per month for this service, how can I download it without having to pay again?

  Hello

  Please download Acrobat Pro ms of the here. After you download the application, install and activate it by providing your Adobe ID

  Thank you

  Abhishek

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• OfficeJet 8600 more: impossible to activate the Scan

  Use OS x 10.10 and printing/scanning using wifi, all of a sudden the scan button went from my printer on my macbook pro. It worked fine until a few days ago. I tried to delete the printer drivers and reinstall. I chose the name of the printer and printing not slected to air. I checked all of the updates and also updated the firmware to the printer. The scan button is missing and the option "enable scan" is crossed out in red. If I connect the printer cable printer a new printer icon becomes available in the primnter options and it can analyze. Any help would be appreciated.

  Hi @PlusBiz ,

  I see that you have problems with scanning via the wireless network, but you can scan through the USB connection.
  I want to help you with this issue today.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Attempt to activate the scan of the computer again.

  Try to print and scan the image.

  If you do not always have the option, do a uninstall complete and reinstall the software.

  Uninstalling the printer software.

  The steps should also work for Yosemite.

  Also, check the following points:

  Some of the files described in the following steps can be found, if you can't find one of the files or folders on your computer, do not be alarmed.

  Move the files or folders to the Recycle Bin, drag and drop.

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, IO HP and HP trap monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * files starting with HP or hp
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.
  Turn it back on.
  Empty the trash.

  Reinstall the software of the printer again. HP Officejet Pro 8600 series full feature software and drivers.

  If you're still having problems, it could have been an automatic update on the router and port scan isn't currently open.

  You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  Please let me know the results.

  Have a wonderful day!
  Thank you.

• 13 "Macbook Pro retina heats up on the bridge and google maps satellite

  Hello!

  I have a 13 "Macbook Pro retina

  I noticed that when using google satellite view maps (no matter if in Safari or another browser) my Mac begins to quickly heat up to 102 degrees Celsius (I use https://www.seense.com/menubarstats/ to measure the speed of the CPU temp and fan, but even without any application, you can easily feel the high temp and hear the blowing fan) the fan also starts to blow at maximum speed. When I left the site everything returns to normal.

  Same thing happens when I discover the overpass in Maps.app. When I left the temperature goes down to normal.

  I can compare the situation with my MacBook Air a years more and I have none of these problems in this regard. Strange that both Mac have only the Integrated GPU. No idea what may cause heat upward? Dealing with the satellite or view 3d demanding for rMBP but not for the older MBA buildings? Both on the latest version of the model

  Thank you!

  Hello there, villovsky.

  Looks like you see increases in temperature and fan problems when using particularly intense applications on your MacBook Pro. The following Knowledge Base article offers up to large initial measures for troubleshooting:

  Reset the management system (SCM) controller on your Mac.

  Before resetting the SMC

  Reset the SMC only after trying all the other standard troubleshooting. Try each of the following steps in this order before resetting the SMC. Test the issue after performing each step of troubleshooting to see if the problem persists.

  1. Press Command-Option-ESC to force stop any application that is not responding.
  2. Put your Mac to sleep choosing sleep from the Apple menu. After that he went to sleep, to wake up the computer.
  3. Restart your Mac by selecting restart from the Apple menu.
  4. Stop your Mac by choosing stop from the Apple menu.
  5. If your Mac does not, forcing the Mac to stop by pressing and holding the button for 10 seconds. You will lose any unsaved in all open applications work.

  If you are using a Mac laptop, which is the power or battery issues:

  1. Unplug the adapter from your Mac and the electrical outlet for a few seconds, then plug it back.
  2. Stop your Mac.
  3. Remove and reinsert the battery, if it is removable battery.
  4. Restart your Mac.

  If the problem is still not resolved, you may need to reset the SMC. See indicators and the steps below.

  

  Indicators that need to be reset your SMC

  After you perform a standard troubleshooting, these symptoms can indicate that a SMC reset may be necessary:

  • The computer fans operate at high speed, even if the computer does not have a very heavy use and is properly ventilated.
  • The backlight on the keyboard not behave correctly on Macs with this feature.
  • The led State (SIL) not behave correctly on Macs with this feature.
  • Battery LEDs, if present, are not well behaved on laptops Mac with a non-removable battery.
  • The backlight of the screen does not correctly to changes in ambient light on Macs with this feature.
  • The computer does not respond to the when you press the power button.
  • Mac laptop does not properly when you close or open the cover.
  • The computer sleeps or stops unexpectedly.
  • Battery does not charge properly.
  • The MagSafe LED power adapter does not have the correct activity.
  • The computer performs exceptionally slowly, even if she is not experiencing abnormally high CPU utilization.
  • Application icons can bounce on the dock for a while when opened.
  • Applications may not work correctly, or they may stop responding after the opening.
  • A computer that supports target display mode does not switch in or out of target display mode as expected, or it goes in or out of view target at unexpected times.
  • Autour lighting of on a Mac Pro I/o ports (end 2013) does not turn on when you move the computer.

  

  Reset the SMC on Mac Laptops

  First determine if the battery is removable. Computers Mac notebooks with a non-removable battery include MacBook Pro (early 2009) and later, all models of MacBook Air, MacBook (late 2009) and MacBook (retina, 12 inch, early 2015). Learn more about batteries for computers laptops Mac.

  If the battery is good behaviour

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  If the battery is removable

  1. Stop the Mac.
  2. Unplug the MagSafe from Mac power adapter.
  3. Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
  4. Press and hold the power button for 5 seconds.
  5. Reconnect the battery and the MagSafe power adapter.
  6. Press the power button to turn on the Mac.

  The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.

  Thank you for being a part of the communities of Apple Support.

  Kind regards.

• Satellite Pro 400CS: impossible to activate the APM

  Hello, I have on my pro 400Cs satellite I installed windows. In the equipment manager, APM support is disabled. If I have, it will activate and after a reboot it am off again. In addition, the announcement of the battery is missing. Sleep mode does not go as. If I have the software utility downloade it indicates with the announcement of the program Toshiba stack.

  What it am I do?

  By
  Frank

  Hello

  This device is a good old classic. As far as I know that it s about 10 years.
  It was delivered with the Win95 and Win98.
  Well, I can't give you a solution to your problem because this unit is too old.
  You'll be a man of luck even if someone here in the forum knows an answer to your problem. All I can suggest is to check the BIOS. Maybe that here you can activate or change it in addition the battery settings.

  Good luck

• F4 key doesn't work does not after El Capitan upgraded for my MacBook Pro. Used to be the date and time. Anyone know where to find it now?

  When I upgraded my MacBook Pro to El Capitan, the F4 key that allows to display the date, time and calendar has stopped working. Anyone know if this is not supposed to want to work more? Or how I can quickly display the date and time as I'm used to using the F4 function key?

  On my Mac running 10.11.2 which brings to the top of the dashboard. I think that there are now three different ways to make in the face of dashboard elements, which seem completely obscure to me. I just set mine to do what he did originally come in an overlay with the widgets running.

  Look in System Preferences > Mission Control...

  to halfway to the bottom of the box:

  Dashboard: {as overlay, like space, Off}

• Files and Settings Transfer Wizard has been used to record all my info. I installed a new drive and a fresh install of XP Pro. When I reverse the process and navigate to the folder, it will not recognize the path to the folder or information. What should

  Had to install a legal copy of XP Pro., so I also installed a better hard drive. I got all the information on the use of the files and Settings Transfer Wizard. The directions were quite easy and I transferred the information on my other hard drive without any problem. Once everything was installed, I tried to recover the said info. I failed.

  Hello

  There are three points of important control you need to follow in order to extract the files and settings of the F.A.S.T. see image:

  Dealing with corrupt files and transfer settings (F.A.S.T.) image Assistant:
  http://WindowsXP.MVPs.org/fast.htm
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• How can I configure the printer on my Officejet 6500 a display more to the date and time?

  I replaced my wireless HP OfficeJet All In One printer 6400 with a 6500 has more wireless and want the default screen to have the date and time, just like my previous one. How am I able to do? I've set the date and time through preferences, but I want to be there when I turn on the printer.

  Hi Irvonne!

  Displays the date and time on the home screen of the 6500 a Plus isn't a feature of the unit is supported, I'm afraid.

  Thank you

• Adobe Acrobat Pro DC: impossible to validate the serial number. [was: NEED of URGENT HELP]

  I recently bought Adobe Acrobat Pro DC ( order number: 12152877759) for Mac. I followed the steps to download the program. When I got to the page of the serial number in the installation steps, a yellow massage appears at the top of the page with: «we are unable to validate the serial number of Adobe Acrobat.» PLS, contact Customer Service"before I get the serial number. When I entered the number sent by e-mail at the front desk, the same threshold of top massage of the page without any progress.
  

  I have tried several times to uninstall all files related acrobat, reboot the system and download the program of link Download Pro or Standard versions of Acrobat DC, XI or X But same problem repeated itself. I also changed my Adobe account & used a new and still the same problem accrued. I have raised the issue of yesterday & had been connected with meenakshin83966505 throughout the day without any solution progress & it you end up with this massage (if you get the error message, you must Contact Customer Services.) Sign in using your Adobe ID and then select your product from the list. Then select chat option under "still need help? Contact us"). Since last night, so far I have had no response or connected with someone to help solve this problem.

  I paid US $ 450 to buy this product and can not use it to unknown and no problem supported with it!

  I need to get an answer, how to solve the problem and that the program works. or els I have to repay my payment. Fast action is much appreciated.

  Thank you

  Hi Rajshreeb,

  They have already called & solved the problem online. It was really very useful.

  Thank you very much for your positive support, I really appreciate it.

  REDA

• Why Adobe Premiere Pro offers more effects for the windows and Mac platform?

  Whenever I find a new cool effect that I would use it seems that it is only available on the windows platform.  I am a mac user and I was wondering why this is.

  Hi Producme1,

  This is because as Premiere Pro, for once, a single application of Windows (between CS3 and Premiere Pro 1.0). Effects developed in this time period still exist. When version has been ported to Mac, not all effects was coded based on timelines - as it was quite a monumental task to recode the entire application. You still see the remnants of this change to date. Rather than a lot of these recode effects, some of them are being deprecated since Windows.

  I suggest that you look into the use of plug-ins from third parties who can close some of the gaps between the Mac and Windows versions. I hope that helps answer your question.

  Thank you
  Kevin

• First Pro CC impossible to extract the downloaded files U44M1I210

  I took my first Pro CS6 computer and have been unable to get the CC version to work continuously receiver of the message:

  Impossible to extract the downloaded files.  Try to press to redownload again. (U44M1I210).

  Try http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

• OfficeJet Pro 8740: Impossible to activate the web services

  I can't activate my new printer (Officejet 8740) web services.  I looked through several web pages without success.  It doesn't seem to be an option on the Billboard related to web services.  ePrint, Apps, etc., are all disabled. There are no visible icons.  What to do next?

  Hey @Ricktm56,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the activation of Web Services on your Officejet 8740 e-all-in-one printer. I can help you with that.

  To start, we need to change the setting of the printer from Commercial to consumer settings. To do this, I'll send you some directions in a private message. If you check your Inbox forum you should see a message private to me shortly.

  After resetting, please let me know if you still have problems with the activation of web services after doing the above. If you are able to install web services, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• OfficeJet Pro 8610e model A7F: unable to make a copy of the front and back of the ADF on my OfficeJet Pro 8610e model A7F64A

  I can't make a duplicate with one copy double-sided Control Panel of the printer using the COPY function. It does not show an option for 2 original face 2 face copy. The printer has a duplexor unit installed, the latest firmware, but the option described above does not appear on the printer Panel option "double-faced." I prefer not to repeat the flat glass scan - Tower and the tests to get a copy of face 2. The printer has no problem filling a two-sided printing function. What can I do?

  Sarge-5

  It's one of the limitations of the 8610 compared to 8620/8630.

• OfficeJet Pro 8710: Impossible to establish the wireless connection between my laptop and OfficeJet Pro 8710

  I'm tryng to connect wirelessly between my laptop and printer but I am unable to do so.

  My laptop finds the printer and when I go to add the device I invite me to "Enter the WPS PIN code for your printer". So, I printed out the Configuration Page of the network and it gives me the "wi - fi direct password", which I suppose is the password that is required to establish that it connection (I may be wrong in my explanation). However, when I type the password on my laptop it does not establish the connection. I said "try to add the printer again, or check with the manufacturer for addiitonal installation instructions.

  Any insght and assistance is greatly appreciated.

  Thank you.

  Hello

  You should searh for your wifi network at home and connect your printer and the laptop to the network. Direct WiFi option is really only for configurations that do not have a modem/router.

  You may need to disable the option Wireless directly on your printer to help the wireless configuration.