LaserJet P1102w: two side printing on Laserjet P1102w

Similar Questions

• Two side printing k550

  I have successfully used my Officejet Pro K550 years.

  Now, however, I am unable of printing on both sides.

  I am on OS 10.6.8

  I'm looking for suggestion

  I solved the problem. I found a sweater driver down in the printer utility. e pull down has two boxes to check, one for printing on both sides and the other for tray 2.

• Printer HP 6100 range - how to print multipage as two sides printed document

  I'm new to this printer.  I have a document with several pages I want pri nt in a format of two sided pages. I want to print the odd pages only, then reload these pages and print even pages only.

  I can't understand how to charge for print even pages.

  How can I do this?

  Thank you

  Hello

  Based on the following specifications, your printer doesn't support duplex (auto or manual). You have to work it yourself. Word allows you to print the odd pages and then even. My suggestion: take a punch, to test with small (say 4-page document) and you can you train it how to activate and re - load documents on the set.

  Good luck

• Windows 7 LaserJet P2055dn - No. auto both sides print

  I am running 64-bit Windows 7 Ultimate and my LaserJet P2055dn printer attached USB works fine EXCEPT it may not be able to manually print on both sides. If I understand the situation correctly, the printer driver that is installed by the operating system is for Color LaserJet P2050 Series PCL6. The HP site, it seems that if, unlike Vista, there is no specific driver for Windows 7 for the LaserJet P2055dn. I can live with this situation, but I would appreciate your comments or suggestions on how I can activate auto two side printing on this printer.

  HP has a document that describes what you need to do to activate automatic duplexing on the CP2025. The address of the page is:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=115&prodSeriesId=3673580&prodTypeId=18972&ObjectID=c01917596

  In case the address is incorrect... Here are the instructions:

  To enable automatic duplexing on printer drivers, follow the steps below:

• HP OfficeJet Pro 8610: my printer HP Officejet pro 8610 ceased two-sided printing

  Even if I check duplex printing as my selection, the print job is unilateral.  This feature is used to work perfectly.  Does anyone know how to fix this?

  Hi @-donna-1,.

  Thanks for getting back to me.

  Did you follow the steps described in the guide to see if you have the HP two sides printing accessory (duplexer) installed?

  In the section: How can I auto duplex if my printer support?

  If the problem persists, follow these steps:

  Fix permissions of the drive on the Mac:

  1. Close all applications.
  2. In the Apple menu, click OK, click Applications, and then click utilities.
  3. Double-click disk utility.
  4. Highlight your hard drive / partition on the left.
  5. Click on check and then repair disk permissions.
  6. Restart the computer.

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  1. Click on the Apple icon and then click on System Preferences.
  2. Click on printers and scanners.
  3. Make a right click (or Ctrl + click) in the left white side panel, and then click Reset Printing System.
  4. Click OK to confirm the reset.
  5. Type the name and the correct password.
  6. Click OK to reset the printing system.

  Add the printer:

  1. Then click the + to add the driver, select the printer (you may need to click the drop down menu to select the name of the printer).
  2. Then click the Add button. Do not add the AirPrint driver.
  3. Now, try to double-sided printing.

  I hope this helps.

• I have a LaserJet P1606dn - all of a sudden, I can't use the automatic on both sides print - Please help!

  I have a LaserJet P1606dn - all of a sudden, I can't use the automatic on both sides print - Please help!

  Hello

  Make sure that the automatic duplex printing option is selected:

  Enter the control panel > printers

  Right click on the printer icon, and then click Properties (printer properties for Windows7).

  Click the Device Configuration tab.

  Make sure that the option allow automatic duplex printing is checked.

  If there is no change, try to uncheck the print manual duplex option below, then check any change.

  The terms may be a little different because my OS is not in English.

  The front part / duplex must be placed at the bottom left part of the device Configuration dialog box.

  Please let me know of any changes,

  Shlomi

• How to use the print face feature two automatic? I get only one side printed.

  I just got a new HP Officejet Pro 8600 and it says it's supposed to automatically print double-sided.  When I have a paper face two feed the paper from the upper bin feeder, it takes in and it then prints on one side, then he pulls the book which he just printed in as if he was going to print the second side, but then it ejects just page and does never print the second side.  I have an Asus computer running Windows 7, but I'm just trying to make a copy two faces to the right of the printer itself.  I went into the settings and there are two options under two back, we say '1-coast face 1 copy Original' and the other choice I have chosen is "1 side 2-sided original copy.  Those are the only choices.  What I am doing wrong?

  The two-sided printing module will print the back automatically when printing.  When making copies, it will print the back if you put two (or more) pages in the feeder and select this option to copy 1-face to face 2.  This model apparently does not 2 head to head 2 copies, i.e., it doesn't have a mechanism to scan the rear face of load in the ADF.

• Default AirPrint of reversal of the rather long and short side (printer Photosmart 5520)

  Hello

  When I used to print from my iPad via AirPrint on both sides on my printer HP Photosmart 5520, it used to print, so that you may browse on the long side. For some reason, it changed to printing, so it switches to the short side.

  How can I change by flipping on the long side?

  My son has discovered a fix for this problem. We have now tried on three iPads and whenever he has set.
  The solution is to disable double-sided printing in the options when you are about to print a document and then turn it back on.
  After that the only time anything printed duplex will be sharp long printed not short edge.
  It is not a rocker, I can't get my iPad to print double-sided on the short side now (not that I want to), for some reason once you turned two-sided printing off and on again, long-back becomes the permanent default.
  Weird!
  
  P.S. He arranges for all applications.

• single side printing on Photosmart 6525

  I have a current imac, running 10.0 system. I use the word processing software Word 11.0.

  Before upgrading to the latest softwar system and buying this printer (that I made the same time), the print dialog box that came in Word 11 offered a choice between a front and double-sided printing.

  Since the upgrade and the printer purchase, this choice still appears when you print from other applications, but does not when printing Word 11.

  So I need to issue a command to print a separate page for each page I want to print one side only, which is everytning.

  How to front and double-sided printing in these circumstances?  Should not be a choice whenever I want to print?

  Thank you.

  Hello
  Please follow the steps below to disable two-sided printing

  On the file menu, select print. The print window is displayed.
  NOTE: The print window might be minimized. Click the blue triangle next to the printer name to see all available parameters.

  Click on the Copies of the Pages & drop-down list in the dialog box print from MS Word.

  Select layout from the drop-down.

  Set the duplex as Off.

  You can save the settings for later use by clicking preset > save current settings as preset. By default, a used preset will remain until another preset will be used.

  Kind regards
  Shlomi

• Photosmart 7525 does not as advertised two-sided printing

  I just bought a printer Photosmart 7525, partly because my upgrade to Maverick on my MAC is my 3200 Series obsolete and she was acting strangely.  The new printer has taken longer to implement than I expected (not exactly an intuitive process and he had not provided all the guidance documents). I managed to get more work, but there is no option to select two-sided printing when you print directly from Word. I had to go through 3 non-intuitive screens to find the print options for the pages even / odd - it's much easier to save in pdf format and get rid of Acrobat.  But I still do not think the double-sided printing option that is promised in the product documentation.  I find some online reviews maybe I need an accessory, but I thought that the product has come with the ability.

  Please notify.

  Thank you

  Hi hybridgeek,

  Thanks for keeping me posted. Unlike programs preinstalled, Mac print options two sides is hidden in settings. If you open the print dialog box, click on the area of lowest selection - Copies & Pages, select from the drop down.

  Set the duplex option as the binding Edge Long (Portrait) or binding Long Edge (landscape). You can save the settings for later use by clicking preset > save current settings as a preset and naming.

  Source: Post Re the ShlomiL: how to double face printed word when NO option for "2 Facer" when printing on HP

  Please let me know if that fixes the problem, thank you

• HP Photosmart 2610 all-in-One, Manual Two - Sided Printing, HP support email Ticket number: 8028153835

  E-mail HP supports, ticket no: 8028153835

  I bought my printer all-in-one HP Photosmart 2610 in 2005. It has already been installed on a HP laptop, Windows XP computer, and worked all the features.

  He is now on a PC running Windows Vista Ultimate 32. When I tried to install the CD, it wouldn't load because of the Vista OS. Then, I loaded the printer driver HP Photosmart 2600 series full of features (Vista compatible OS) to the following HP Web site link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-47754-1&LC=en&DLC=en&cc=us&...

  Now I can't get the print preferences to print (double-sided) of manually printing two-sided. This option is available on the original printing software.

  I tried the solutions: HP Image Zone help / duplex prints that show: click the finished tab / in the Document options box / select print on both sides checkbox (this check box is not available).

  When I run the printer of the Panel as an administrator, the printer properties / device watch manual duplex settings: enabled.  When I go to the printer properties / Advanced / impression of the default values, or the finish / Print On Both Sides checkbox is available nor printing Shortcuts tab will allow the option Print On Both Sides to appear (shows that Print On Both Sides: Off).

  E-mail support HP told me to install this patch to correct the problem:

  http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?softwareitem=MP-69848-1&cc=us&LC=en&...

  When I try to install the patch, it will not load because he wants the original CD software. So I'm back to my original problem trying to load the original printing software does not load because the CD is for Windows XP operating system. I'm in the stalemate between the software CD I have, and what is available on the HP site.

  What is your solution?

  I chatted with a HP technician online today.  I had the same problem with Vista, not to recognize the Manual 2 sides print.  His solution was to add a new printer, the HP Deskjet 6500.  This works!

  Go to control panel, hardware and sound, add a printer, add a local printer, select port to use, select HP Deskjet 6500, following, then select if you want whether it is your default printer and then click Next.

  Two back will be available when you select the Deskjet 6500 as your printer, even if you actually use your HP 2610.

• EPSON CX17NF missing on both sides Print Option

  I have this option on my PC Windows 8, but it is not available on my Mac OS 10.11.4

  Could someone out there offering help other than printing ODD and EVEN page layout options

  Thank you very much

  Daniel

  I had problems with getting two back.  I know that you have a printer that is different, but here are a few ideas.

  

  1) look through the presets to see if two-sided printing could be there

  (2) mg3120 had two faces printer for some time, the default value.  Delete this printer and re-installed.

  (3) in some cases, there is another button on the print screen, which deals with the configuration or something, to look out there for double-sided printing.

  Suggest that looking on the net for the latest drivers.

  R

• How to enable two-sided printing on MacBook Pro with Canon MX490 printer

  Hello

  I have the MacBook Pro (retina, 13-inch, early 2013) and OS X version 10.11.4 (15E65) and Printer series Canon MX490.

  When I try to make a double-sided, the printer settings printing does not allow me activate two-sided printing.

  

  Also when I go into the settings of the printer, there is no option for me to select this option to enable printing double-sided or duplex printing etc..

  

  When I try to print with TextEdit settings, I still get the same printer settings and it does not allow me to enable two-sided printing.

  I couldn't find answers online, and frankly it's frustrating. I would appreciate if anyone can help with the problem.

  Thank you very much!

  This is the screenshot of the settings under the printer to textedit. Sorry I don't tie with the original message earlier.

  

• HP ENVY 7640: HP ENVY 7640 2 sides print and find the most printing problems

  Printer installed on 2 computers. To print 2 sides. No options settings except manually don't print on both sides. Can go to printer properties and choose 2 sides printer here, but not an option under settings. Shouldn't the option for 2 show print face upward under settings?

  Also when click on 'Find the print settings more' under the settings in the menu printing, an error message warning that "a serious problem occurred the last time that Word has attempted to recover the HPE04E66 print settings (7640 HP EVNY series). If click 'connect to the printer', Word crashes. (Happens on both computers). Is it possible to fix this?

  If the help Wizard does not update your printer, I would ignore the update or uninstall the program.

• WRT54GS - broadcasting of two SID

  My WRT54GS seems to emit two SIDS wireless

  One is called linksys - and is open without any security. I guess that's a default setting?

  The other is one I set with security WEP and MAC filtering.

  How to I get rid of the value by default "linksys" sid and don't allow access to the SID defined with security?

  Thanks in advance

  Thanks, just loaded iStumbler and Yes ADR mac for the sid that I configured is as expected. The linksys SID has a different macaddr so it must be a neighbor who has an open wireless router.

  Thank you!!!