Windows 7 LaserJet P2055dn - No. auto both sides print

Similar Questions

• I have a LaserJet P1606dn - all of a sudden, I can't use the automatic on both sides print - Please help!

  I have a LaserJet P1606dn - all of a sudden, I can't use the automatic on both sides print - Please help!

  Hello

  Make sure that the automatic duplex printing option is selected:

  Enter the control panel > printers

  Right click on the printer icon, and then click Properties (printer properties for Windows7).

  Click the Device Configuration tab.

  Make sure that the option allow automatic duplex printing is checked.

  If there is no change, try to uncheck the print manual duplex option below, then check any change.

  The terms may be a little different because my OS is not in English.

  The front part / duplex must be placed at the bottom left part of the device Configuration dialog box.

  Please let me know of any changes,

  Shlomi

• Acrobat Pro DC not recognizing both sides print with HP Scanjet 7000.  Any ideas on a fix?

  I've recently upgraded to Acrobat Pro DC and the print command both sides worked until yesterday.  Now Acrobat will still scan pages only side, but even with both sides order selected, it does not analyze both sides of a document.  I tested the scanner and it will still scan and copy both sides of a document using the duplex control on the scanner button.  I use a pc with windows 7 64 bit and a HP Scanjet 7000.

  Hello

  An update was published next to fix two issues analysis introduced with version of July. The update is available at the following link:

  https://helpx.Adobe.com/Acrobat/release-note/Acrobat-DC-August-06-2015.html

  Thank you & best regards

  Sachin Soni

• EPSON CX17NF missing on both sides Print Option

  I have this option on my PC Windows 8, but it is not available on my Mac OS 10.11.4

  Could someone out there offering help other than printing ODD and EVEN page layout options

  Thank you very much

  Daniel

  I had problems with getting two back.  I know that you have a printer that is different, but here are a few ideas.

  

  1) look through the presets to see if two-sided printing could be there

  (2) mg3120 had two faces printer for some time, the default value.  Delete this printer and re-installed.

  (3) in some cases, there is another button on the print screen, which deals with the configuration or something, to look out there for double-sided printing.

  Suggest that looking on the net for the latest drivers.

  R

• 6700 HP all-in-one: HP 6700 disable both sides print

  I can't understand how to disable two-sided printing so I can print labals.

  Hi @BruceWms,

  Welcome to the Forums of HP Support! I read your post and see that you want to be able to disable two-sided printing. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I have provided a document to set the duplex settings, you can follow to clear two-sided printing.

  Follow these steps to open the Layout Panel, and then change the print settings to print double-sided.

• Message of "Print on Both Sides" HP laserjet p1102w

  My hp laserjet p1102w suddenly started flashing a blue message "print on both sides" when I try to print a single document from the front.  After that I closed the window, it prints some kind of test page. How can I stop?

  Hello

  Here are the steps to disable manual duplex printing on this printer

  Start > Control Panel > devices and printers, right click on the printer icon

  Printer properties > device settings tab > Duplex mode > uncheck the manual duplexing option allow > apply > OK

  I hope this helps...

  Although I am an employee of HP, I speak for myself and not for HP.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.

• HP LaserJet P1102 cannot print both sides of the paper

  I updated my Windows 8 Windows 8.1 and now I can't print both sides of the paper.

  In my old Windows 8 my printer HP LaserJet P1102 printed the odd sides of the document, then a pop-up window appears and when I click on the 'next' botton and submit the documents to the printer printed the sides of the document. After that the Windows update in the context menu does not appear, so the printer simply prints the odd sides and then nothing happens (just the red flashing on the printer).

  I tried to update the driver (downloaded from your site), but nothing has changed.

  I hope that you can add some useful tips and I can solve this huge problem.

  Thank you!

  Hello

  I understand that you can print is more on both sides.

  When the light flashes try and open and close the lid to see if continues to print.

  (there is no button for the printer but which will resume print jobs)

  I would do a complete uninstall and reinstall the printer software to see if that makes a difference.
  You can download the drivers from this url.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110396&

  Win8 and Win8.1 drivers are the same Version9.0.

  If you need more simply make assistance let me know.

  Please let me know if the printer is connected by usb or the installer on a wireless network.

• Printer HP CP1215 Color Laserjet will reverse only upward when both sides feel

  Recently, I replaced my old Dell XP PC with a new Zoostorm W7x64 Professional OS PC and transferred my HP printer which worked perfectly the new system.  I followed all instructions to update the software and drivers, but now the printer will reverse only upward flanked of printing page even if I chose flip over as my print mode.  I tried the flip up instruction also and it works as it should.  Can I use is no longer my instruction to print two face now that I can't print reports that reads like a book otherwise that manually adjust the paper in the tray.  All solutions, anyone?

  Hi artable ,

  Welcome to the HP Forums.

  I see that you have problems with printing on both sides paper to flip on parameters does not.
  I'll be happy to help you.

  Which driver you have to download and install?

  I download, save and then run the full feature software and drivers if you have installed the Plug-and-Play package to see if that will solve this problem.

  HP Color LaserJet Full Feature software and drivers.

  You change the preference of the printer in the application or in the printer properties window?

  Try another application to see if you have the same problem.

  Please let me know the results.

  Thanks for posting on the HP Forums.
  Have a great day.

• How put two windows (both sides) will appear on the same screen together, one behind the other, during run mode?

  In Labview, is it possible to put two windows (both sides) appears on the same screen together, one behind the other, during run mode?

  It's a shame

  Secondary, it's a great way to call subVIs and you load only code when you call it, so it ease your use of resources.

  Anyway, you can call Vi as pop up:

  https://decibel.NI.com/content/docs/doc-2064

  You could split your FP using the separator.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_splitter_bars_and_panes/

  Or you can use the control tab.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_tab_controls/

  Regars.

• LaserJet P2055d: Printing on both sides

  I got my default printer settings to print on both sides of the A4, but then I moved my printer on my router to allow another computer at home to print on it when my main computer is turned off.  I don't get the same preferences to printer from the printer on the router moving domestic Net gear that is part of the network and under available it does not give me the option of priting on both sides of the paper.

  I tried to update the driver, but I think that I later, anyone know how to fix this?  He is now asking me manually print on both sides in word and before he used to do it automatically.

  Are you sure that you select the printer properties dialogue rather than the property dialog?

  On my Windows 8.1 Pro 64-bit system, (albeit for a different printer model):

  

• I'm in CS6 and the application window is too big on my laptop, it is off the screen both sides?

  I am in CS6 and the application window is too big on my laptop, it is off the screen on both sides, I have to scroll through the different menus. I tried Window / better and there is no options, window/workspace allows me to reset, but it doesn't matter. Is there a way for the application to adapt to the size of my screen?

  You can click on the Maximize button, which should fit photoshop to the screen?

  

• Between to Windows 7 cannot print on both sides

  I have recently upgraded to windows 7, XP and bought the disc for my Photosmart C7280 printer HP all-in-one. I have uninstalled and installed the printer three times to try to get it right but the option for printing on both sides of the paper is still not available. When I look at the printer in the Control Panel, it tells me that the printer works properly. How can I get this feature available for me?

  Here is a link to a document that can help

  http://support.HP.com/us-en/document/c01087154

• HP LaserJet P1102: Printing on both sides

  I can no longer print on both sides.
  If I print on one side... It is ok
  If I print on both sides... It is not the case... The first side out without printing... The second face is OK
  
  I printed several times and it was perfect.
  I don't know what to do.
  Thanks in advance and excuse my English

  Hello, you use a PCL 6 driver? If so, try using PCL 5, and see if anything changes.

  I hope this helps...

• LaserJet P1102w: unable to print on both sides manually

  I'm trying to print a PDF in Acrobat reader to P1102w printer file on both sides manually. but it's only the same prints pages and errors when's the time to print the odd pages. The dialog box that tells you to continue to print after that reload the printed paper will appear. What should do?

  Hello

  When she finished the first side reload pages print, and open and close the top page cartridge access door and the print job must continue...

  Please let me know if this can help,

  Shlomi

• Windows 7, can't print on both sides

  My work computer has been recently updated and now when I try to print on both sides so that the box is no more on my print controls.  I was able to do this with previous versions of Word and Excel.  Is there a way to do this? Also, when I go to the advance tab, I change the 'back print' to 'on', but it makes no difference. Help?

  Thank you!

  Kris

  Probably, you have a generic printer driver and need specific driver from the manufacturer of your printer brand and model.  Since you don't say what brand and model printer you have, that's all I can tell you.

  Good luck.