LaserJet p1102w, windows 8.1, prints, but reports error

Similar Questions

• LaserJet P1102w: Impossible to activate printing odd/even

  Hello

  I try to print double-sided on my first impression p1102w all odd pages of my document, then even pages.

  However, under OS X Yosemite (10.10.3), there is no way to change the default to print preset. I can view all the presets and see their settings, but there is no way to change the values.

  There are buttons remove and duplicate the presets, but these buttons are grayed out and inaccessible. Does anyone know how to activate different presets? I realize the p1102w is a basic printer, but certainly odd/even printing is a pretty basic requirement?

  It seems a shame that HP do not provide their own driver Mac to Yosemite but rely on the provided Apple pilot, who must surely be much more limited.

  Cheers, Steven

  Hello Steven!

  Great to see that you were able to locate spent settings and complete the required task.

  Add in the menu the lowest (the one listed as layout / name of the application (e.g. Textedit) / copy & Pages in MS Office applications) you can select manual Duplex printer, who will guide you to charge the other side easier.

  If there is no dialog boxes displayed to reload a page load just the side printed face down in the input tray, then open and close the top page cartridge access door to return to work manual duplex.

  Kind regards

  Shlomi

• HP LaserJet P1102w: Windows 8.1 - run two different USB connected P1102w printers with simple shortcut on the desktop?

  I am trying to set up a single laptop Windows 8.1 for someone who uses it according to the seasons in two locations (FL and MY). I installed a HP LaserJet P1102w printer in each location. I wish I had a printer that is connected USB (one at a time will be connected) able to access in an only menu icon Office or file print command.

  When you add the second printer, Windows8.1 recocognized, the driver is already installed, he apparently recognizes the different addresses MAC and/or numbers of series of different printers and present second printer on the page devices and printers in Control Panel or allow a second printer on the desktop icon.  The only way to tell apart printers is that one is listed as a Hewlett-Packard LaserJet P1102w and the other is listed as a HP LaserJet P1102w. It is rather confusing to the elderly person who will be using the laptop.

  Is it possible to have the mobile exploit any printer is connected both by means of a simple print command or icon? Maybe by connecting via a WSD Port Monitor?

  Thanks for any help or advice!

  Dave Waters

  Hey @dmwaters138,

  Welcome to the Forums of HP Support!

  I understand that you do not want to have two HP LaserJet Pro P1102w printer operation via USB Wired on 1 single machine with a single order of printing or the icon. I would like to help you with the configuration of this option today. Because there are two distinct Laserjet on Windows 8.1 computer printers, to do two icons impression for various devices. The best way to tell the difference between the two devices is to rename printers. Thus, when the client goes in file and print in the print dialog window, simply choose the printer name that corresponds with the device they want to print to. You can rename printers all you want. Install printers on the WSD Port wireless network would give the same result of having two copies of the printer is installed on the computer. One thing I see, is that the name of the HP Laserjet Printer is unusual. It seems that your printers may be using the built in Windows drivers, rather than the HP Full Feature driver package for the device. This may cause printing conflicts in the future. Can I please you follow the steps below to set up and install both LaserJet HP correctly.

  Step 1: Remove the drivers:

  It is crucial that your HP LaserJet are using the correct HP driver package. So I'll have you remove two copies of your HP Laserjet of the computer. Please make sure that the USB cables are connected.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
  2. In the start screen, type devices and printers. Click on devices and printers
  3. In devices and Printers window please right click on the Hewlett-Packard Laserjet and select delete device or delete. Once this copy is a party, please right click on the HP Laserjet P1102w and select 'remove device' for this one as well. After have removed two copies of the Laserjet please close devices and printers.
  4. Then, on the Start screen type programs and features. Click on programs and features to launch the window
  5. Scroll the list of programs and find the HP Laserjet driver package. If you see the HP Laserjet printers select Uninstall. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, please close programs and features and continue to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
  2. In the start screen, type run. Click on Run to launch the run dialogue box
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install devices:

  1. Please leave unplugged USB cables

  2. Please click here to download the package full feature software and driver for the HP Laserjet Printer

  3. when the download is complete, please follow the instructions on the screen to install the first Laserjet. Make sure you select the 'install the printer software ' tab connect the USB cable only when the installation window prompts to.

  

  4. Once installation is complete for the first printer, please open the Start screen and type devices and printers.

  5. once the devices and printers opens, you will see the first copy you installed HP Laserjet. Please right click on the HP Laserjet Printer , and then select printer properties

  

  6. under printer properties , you will see the name of the printer on the general tab at the top. Please rename the printer to something that the customer acknowledges that this first printer. Then click on apply and then OK to save the changes.

  

  7. close devices and printers

  8 open the Start screen again. This time, type run. Click on Run to launch the run dialogue box.

  9. in the run box type %temp% , and then click OK. The Temp folder is now open

  10. in the Temp folder to locate the 7z... file. Click this folder to open it. This is the HP Installer package for HP Laserjet printers. Scroll to the bottom of this file and double left click on the P1100_P1560_P1600.exe driver package. The installation program will now open.

  

  11. in the title of the installation window, select "Add another printer. Don't connect not the USB at the moment. Click Next.

  

  12 connect the USB cable for the second printer once the installation window invites you to. After the second installation, please open the Start screen.

  13. in the start screen, type devices and printers. Click on devices and printers to open the window.

  14. in the printers and devices window, you will now see a second copy of your HP Laserjet. Right-click on the new copy and left click on properties of the printer. When the Properties window opens please rename the second copy of your printer. Click on apply then OK to save the changes.

  

  15. close devices and printers

  When the customer print, in the print dialog window they will just now to choose the name of the printer that fits the HP Laserjet Printer they wish to print to.

  

  I know that sounds like a lot of steps, but I wanted to give you as much detail as possible to ensure that this process goes well for you.

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• HP Laserjet P1102W: Windows 10

  My HP Laserjet P1102W printer is compatible with Windows 10?   He is currently connected wireless for Windows 7.

  Hello

  Yes. It has full software and drivers for Windows 10:

  http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-P1100-Printer-series/4110394/model/4110306

  Kind regards.

• I tried to update my Windows Live Essentials 2011, but an error message 80040609

  Original title: Windows Live Essentials: Error Code 80040609

  I tried to update my Windows Live Essentials 2011 but get an error message after installing up to Messenger. I tried to uninstall Windows Live, but it does not uninstall anything that I have now.

  I'm running Windows Vista 64 x

  Hello

  The question you have posted is related to windows live and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/community

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• LaserJet M1522 \HP: I can print but not scan after 10 Windows installed with HP LaserJet M1522 after trying things on this

  I spent many hours on this forum today trying to solve my problem.

  Everything was fine until Windows 10 installed after I * thought * I hit cancel their incessant commercial.   Before the upgrade of the OS,

  1. I used a shortcut to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\HP\HP LaserJet M1522\Scan which took "C:\Program Files (x 86) \Hp\Digital.

  2. a dialog box appears asking me to choose from a list of profiles of scanning that I did. Once what to choose, I have a second dialog box.

  3. I put the "paper Source" flat and the "Picture color" selected option button.

  4. I USED to be able to just click on Scan and then another dialog asking where to save it but neither preview nor Scan make the scanner scan button.  Overview gives me the wave 'an error occurred... ". Select "vernissage" again.  If I click on Scan, just all disappears.

  ______________________________________________________________________

  I have tried the following to solve this problem:

  Installation of new drivers.

  Doctor to Scan running (here, the green progress bar ends after the "HP M1522nf Scan LI" scanner picking and ending up with an error "Connect without success".)  It allows several options.

  -J' tried power cycling everything.

  -Click on retry.  I take the last option in the list and it gives another green bar and I ended up a complete turn to the first page of the Scan Doctor with the "HP LaserJet M1522 MFP Series PCL 6" and "LI Scan M1522nf HP".  Both still have network connections and "installed".

  -Continue the Scan doctor, I click install get.   I created which today many times without success.

  I came to support and went through what looks like my problem even, but nothing seems to help.  I spent several hours to do.

  I should also mention when it came time to download the drivers there are 3 categories.  In the first category, there are 3 drivers.  I went through each of them at this stage.

  I realize your question at the top of the page is "HP printers - WIRELESS card Scanner is lost (Windows) ''."

  I'm afraid to do an uninstall of HP "stuff" because my computer is a HP and I don't want to aggravate my problems than they already are.

  I understand there is a windows application to use for scanning, but because it also controls the camera to the computer, I wanted to stick with the simple scan, which I used for many years now, coming to scan from my HP scanner/printer to my HP computer.

  Thanks a lot for your opinion.

  OK, got it to work!

  Desinstallion old prinerdriver as good as he got, withdrew the rest of this register and recycled the ' puter.

  Then installed latest firmware for the printer (do not know if this was necessary, but it had those of 2009 and the most recent from 2013, so I guess it wouldn't hurt).

  Installed the latest universal driver for HP (this still does not solve the problem but...)

  Finally reinstalled former driver Win 7 complete solution and then it works. I guess it fills some gaps while retaining the more fresh drivers?

• LJ 400 M401dn: Windows 10 'sees' printer, but won't print

  When I go to print, I get a print error of not being able to print to the print queue so online.  I downloaded all-in-one and tried to install it as a solution after uninstalling the printer.  After 99% installation expires will fail.

  I tried to install through Windows Update.  This installed a 400 M401 of LJ that lists as a Color LaserJet.

  A couple of days, I was able to print and do not know what has changed.

  Someone at - it an idea on what is happening and a difficulty of the dose.

  Windows 10 64 - bit, dn LaserJet M401.

  I found the solution, and it is up to the peculiarities of Windows 10.  In previous versions of Windows, when you initially configure configuring as administrator and users created.  10, configuring users and if the user can have administrator rights, they are not really a full-blownAdministrator.  So, during my installation has been blocked by the administrator, I was curious.

  You need to activate the hidden administrator account, sign in as the 'real' administrator and then proceed with the installation form here.

  http://www.tenforums.com/tutorials/2969-Adiministrator-account-enable-disable-Windows-10-a.html

  Good luck to all.

• HP LaserJet Color MFP M175nw 100 prints, but not scan

  This problem has just appeared out of nowhere the LaserJet printer prints (so it is connected), but when I run the HP basic digitization program, I get the error message that the scanner is not connected.  I rebooted and restarted the printer. Also, I downloaded and ran printing HP and doctor Scan. It detects the printer and the scanner as "installed", but when I ask him to communicate with the scanner, it is said that the "selected product is not conencted".  When I try printer (same ip address), it detects it and gives me the possibility of "Difficulty Printing" or "problem analysis". On the "difficulty of analysis", it says "establishing connection with Scanner", but loops back to the beginning of the process, without success.  Now, it will blow your mind, if I screen Win-8 Metro and run the HP and Capture digitization program, the scan works perfectly (Although this scan utility is more limited than the regular version of HP-Scan). So, here I am trying to solve a communication connection problem, when none really exists.  Has anyone ever seen this situation? Anyone got the answers?

  I fought this problem since I bought the color printer. I understand that the printer is discontinued. I love it, I have two, they work great, except for this problem.

  Now my conclusions and solution.

  After installing the software, it works fine. After a while it doesn't. Some software installed HP must be retired by anti-virus programs or gets too writes because he went, so that the scanner doesn't scan. I have yet to find what is happening to the scan software, but it disappears.

  My solution...  I remove all the software printer HP 100, including port data in the configuration of the printer. If you have installed several times, you will have a list of information about the printer port, remove it.

  I use their basic installation software. Usually always scan not scan. You must install it AGAIN, during the first installation. It works every time, until it disappears again.

  HP technical support has no idea on this issue. I spent more than seven hours talking to probably all the tech they have without success. Finally it me they would make me a 'deal' on a printer company.

  I would like to know if you find that zapped installs it HP. As far as I know is it disappears and the scanner no longer works.

  [email protected]

  Bob

• PSC 2210 all-in-one: PSC 2210 all-in-one with Windows 10: ok printer but the scanner does not work

  
  

  Hey @Manu37520,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the scanning of your PSC 2210 all-in-one printer to your PC for Windows 10. The printer has no drivers for Windows 10. You will need to use a computer with an operating system prior to analyze.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Color LaserJet CM1312nfi MFP does not print, but will copy

  Copies, scans, faxes fine, but when I print the pages are blank. I get messages of ERROR of no..

  When I have access to the pages of menu to perform tasks that includes a print, the pages are blank.

  It recognizes all the cartridges and copy very well.

  Hello mikev9359,

  I understand your concerns. Unfortunately, for this type of printer, I need you to lead our Enterprise Business Community Forums. It will be the right section for this problem. Good luck.

• HP Laserjet P1102W: Change of character printing electronic format

  Print wireless from my iPad is perfect. A small problem: when I print an incoming e-mail or outgoing, the printed result result in many langer (bold) to the body of the text, so that the remains of healing ('from', 'subject', 'date',...).
  Can this be avoided?
  Thank you
  Walter.

  Hello @walterke,

  Welcome to the forums of HP.

  I understand that when you print an email from your iPad printed characters are not in the same format as on the display of the devices.  I would like to help.

  If you use the built in the Airprint feature to print your emails, then it cannot be avoided.

  The iPad uses a generic printer driver that is supposed to work with most printers.

  If you want to make settings on your impressions, try the HP ePrint app.

  Getting started with HP ePrint Mobile Apps

  If you are using the ePrint app and you experience this problem please let me know.

• Trying to remove the folders from Windows one system empty, but in error "is a Windows system folder and is required for Windows work.» It cannot be deleted. »

  My parents bought a laptop from a friend, and recently my father ran an antivirus program that came with multiple files in a folder that has been created by this friend. When you try to delete the folder a box appears that says "it is a Windows system folder and is required for Windows work.» It cannot be deleted. "But all the folders inside are empty and of no use to us. Help?

  The standard answer to questions that begin with «I bought a used computer...» "is you can do a clean install of Windows, because you know not what could be hiding somewhere in the computer.  In this case, it seems as if he is infected with something.

  Legally, the seller was required to give you a way to do this reinstall, but in the vast majority of the private sales of used computers, this requirement is simply ignored.

  If it's a laptop to 'mark' (e.g., Dell, HP, IBM/Lenovo) there may be a hidden partition on the hard drive that can be used to restore the computer to its "fresh from the factory" State.  Of course, this will remove all applications that the previous owner had installed after he or she has bought new, but you should still seriously to consider making such a restore, if the mechanism is available.

  What is the name and the version of the antivirus application that has detected the wrong files?
  What are the names of the files?
  What is the name of the folder that cannot be deleted?
  Are you logged on as a user with the rights "computer administrator" when you try to delete it?

  Assuming that you can not or will not do a clean install of Windows, I suggest the following (do not run scans at the same time, each analysis may take some time, depending on the number of files on the computer):

  Connect as a user with the privileges "computer administrator" and do a full scan with each of the following:

  http://www.eset.com/us/online-scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx (requires download)
  http://www.PCtipp.ch/downloads/Sicherheit/35905/multi_av_scanning_tool.html (page is in German, but the downloaded scanner is in English)

  Also download, install, update and run a scan complete with each of the following:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

• Try to install FLAC Frontend in Windows 7 64 bit, but get error message

  Hello

  Tried to install FLAC Frontend but get this error message...

  The Module MSCOMCT2. OCX was loaded but the call to DllRagisterServer failed with the error 0x8002801c code.

  I looked online and saw tips for Vista that said to try to run Setup in administrator mode.  I tried and failed with error

  The module MSCOMCT2. OCX was not able to load. Make sure the binary is stored at the specified location or debug it to check for problems with the binary files or dependent.dll.  The module is not found.

  Seen elsewhere on run CMD in administrator mode and typing in what follows - regsvr32 \windows\system32\MSCOMCT2. OCX - hit enter, but I get the same error message as I do run the installer in administrator mode.

  I see some online have got it working using the method above, but it could be that I'm not because it is a 64-bit Windows 7 installation?

  The file can be found here

  http://members.home.nl/w.Speek/FLAC.htm

  This was taken from another forum to help. This solution is simple and works.

  > The only thing that has solved this problem for me installs the following:

  >>

  http://www.Ascentive.com/support/New/libraryfiles.exe

  >>

  > treadmill Syswow64, not the System32.

  WHEN THERE YOU ASK WHERE YOU WANT TO INSTALL THE FILES

  REPLACE "System32" with "SysWOW64".
  

  Install FLAC Frontend and it will load smoothly.

  Enjoy and enough bickering. Moderators, please be more useful than a verification of the compatibility lists and say ' well, if she's not here, then go the manufacturer! That is poor it helps and is to say "We will NOT help you."

• Trying to upgrade Windows 7 Professional edition, but make error "the application cannot find one of its required files, possible because he was unable to create it in the folder".

  I'm trying to update Windows Professional and the following error message keeps appearing in the "application cannot find one of its files required, possible because he was unable to create it in the folder.  Please make sure that the folder in which this application was downloaded is accessible and not readonly.  Can someone tell me what to do?

  Hi Bill,

  Please take a look at the thread similar here, thanks to a possible correction.

  I hope this helps!

• HP LaserJet M1212nf MFP: Printer continually initialization. Prints, but don't copy.

  Why my printer HP LaserJet M1212nf MFP (personal information) print but not copy and continually to initialize?

  Hello @PSFforever,