LJ 400 M401dn: Windows 10 'sees' printer, but won't print

Similar Questions

• I have windows vista, my printer is working paper is fine, but nothing is printing on paper there is ink.

  just installed my hp deskjet D4260 printer as I said it is running, the document is fine, but nothing good print on paper.

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to follow the links and check out them.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• I am running Windows 7 Home premium but not able to install my Xerox Phaser 3117 printer due to the unavailability of the appropriate driver

  I'm on Windows 7 Home premium, but could not install my Xerox Phaser 3117 printer due to the unavailability of suitable to my lenovo driver all in a desktop pc. Help, please.

  Sandip Mitra.

  There are drivers Windows 7 here:

  http://www.support.xerox.com/support/phaser-3117/downloads/enza.html?operatingSystem=win7x64&fileLanguage=en_GB .

  Make sure that get you drivers 32 or 64-bit according to your version of the Windows.

  * To see if you're running 32-bit or 64-Bit Windows click:

  Start-> Control Panel-> system

  Then look at where it says, "System Type".

• LaserJet 400 m401dn: HP Laserjet 400 m401dn, make wireless?

  Is it possible to buy a product to make the Laserjet 400 m401dn active wifi or is this product already activated?  The internet router is in another place, so a physical connection is not possible.  I would like the capability configure the SSID, etc. to connect and print.  Thank you.

  > Laserjet 400 m401dn wifi active or is this product already activated?

  The m401dn is a model of printer Dmodel Network (wire) connected.  The active WiFi model would be a M401dw , that would be the model Dand Wwireless.

  However, if you create a connection to your router via a wired Ethernet connection and then the printer would be accessible by wireless network devices.  All you need to do is get the printer on the network.

  > internet router is in a different location so a physical connection is not possible.

  The only options you have are to run a new cable at the location of the printer and Ethernet cable connect with the current hardware.

  Otherwise you would seek to create a 'bridge' between the printer and the router wireless network using a router without wire 2.  Configure the wireless router 2 to act as a client or to fill in the primary wireless router that acts as the main Point of access to the network.  Once the 2nd wireless router is filled in elementary school all the devices that are connected to Router 2 will be accessible from the main access point.

  There are guides out there circulating that walks you through this process, but the specific steps will have to come some 2nd router manufacturer, you can decide to experiment.

  Here is a sample of Cisco support article that calls this "Cascade" procedure one router to another:

  http://www.Cisco.com/c/en/us/support/docs/voice-unified-communications/SPA8000-8-port-IP-telephony-gateway/108678-PQA-108678.html

• Windows Vista Ultimate - printer

  I have a brother MFC - 3220C. When I loaded vista on my computer, the printer stopped working. I called brother got the new vista download; There is, however, no. I'm doing everything I'm supposed to do, but when the program gets to the part where I plug into the usb port, everything hangs and I get an error E["\USA\Install|3220C\Inst32.exe"] can not start the installer app. I'm tired of going out and buying because there is no correct software or ink is as much as a (less) printer new.

  If all goes well, what follows will help you:

  Printer problems in windows
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1: Check hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It: http://support.microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  http://support.Microsoft.com/ph/11732#tab11

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows 7 HP990c printer problems

  Hello

  When I print multiple copies using XP I have no problem. In Windows 7, it prints one (1) copy when requested but 2 or 3 times the number of copies at the request of several copies.  The XP driver is certainly higher, because it allows me to choose ink 'light' setting, which is very useful to prevent bleeding through the paper.  I checked my settings of printer several times for example "pages per sheet" 1 and 'copy the number' 1 copy, etc.

  Everyone knows about similar issues and if so is there a cure?

  I have no confidence in the search for a cure and hope I can add a second hard drive with XP installed on my new computer Windows 7 does not allow me to install XP on my existing hard drive.

  Kind regards

  David

  "David Lisgo" wrote in message News: fb83baaa-40b0-4153-a496-438102e95614...

  Hello

  When I print multiple copies using XP I have no problem. In Windows 7, it prints one (1) copy when requested but 2 or 3 times the number of copies at the request of several copies.  The XP driver is certainly higher, because it allows me to choose ink 'light' setting, which is very useful to prevent bleeding through the paper.  I checked my settings of printer several times for example "pages per sheet" 1 and 'copy the number' 1 copy, etc.

  Everyone knows about similar issues and if so is there a cure?

  I have no confidence in the search for a cure and hope I can add a second hard drive with XP installed on my new computer Windows 7 does not allow me to install XP on my existing hard drive.

  Kind regards

  David

  The last comprehensive features for your printer driver package was released in January 2002. Of the generic drivers as included in Vista and Windows 7 will offer never the same level of performance. If you want a printer that works well, buy a new...
  
  --

  Mike Hall - MVP Windows Experience
  http://msmvps.com/blogs/mikehall/

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• I have a 64 bit windows 7 install OS but browser like x 86, which is 32 bit right?

  I have Windows 7 64 bit, but any attempt to install browser seems to be 32-bit. I noticed during an attempt to examine an Adobe Flash Player problem.

  Any help would be appreciated.

  Firefox for Windows is a 32-bit application and therefore requires 32-bit versions of plugins as well.
  
  If you install the 32-bit Flash version, if this version has not been installed automatically already.

  You can check the version of the current Flash Player here:

  • http://www.Adobe.com/software/Flash/about/
  • http://helpx.Adobe.com/Flash-Player.html

  Versions of Flash player latest here:

  • http://www.Adobe.com/special/products/flashplayer/fp_distribution3.html

  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

  I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

  Hello, by default the firefox session restore feature only allows you to save last 3 windows open. to change this, type on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.sessionstore.max_windows_undo. Double-click it and change its value to 4 (or more).

  http://KB.mozillazine.org/browser.sessionstore.max_windows_undo

• Windows appear on the taskbar, but won't focus, other 3 goes, only 1 that seems to be the main window is not found

  Windows appear on the taskbar, but won't focus, other 3 goes, only 1 that seems to be the main window is not found

  ALT + tab select window; ALT + SPACEBAR; maximize; sigh

• Pavilion 15-p108ne: my computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  My computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  Hello:

  You should be able to use the W7 x 64 drivers and software of p000-15 t on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174371

• I tunes do not recognize my iphone 5 C Windows will recognize it, but itunes won't and I can't sync to my phone. Are there suggestions that reset phone, computer or download itunes?

  I tunes do not recognize my iphone 5 C Windows will recognize it, but itunes won't and I can't sync to my phone. Are there suggestions that reset phone, computer or download iTunes?

  See if the AMDS restart help.

  Instructions here > restart the Service Apple Mobile Device (AMDS) on Windows

• I need to uninstall the iTunes 12.2.0.145 in Windows 7-32 bit, but I don't have the installation of this version files. Can someone help me, please?

  I need to uninstall the iTunes 12.2.0.145 in Windows 7-32 bit, but I don't have the installation of this version files. Can someone help me, please?

  The problem lies in a PC with Windows 7 32 bit

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• Have Window Media Player 11, but with Firefox as browser station radio does not turn on

  Have Windows Media Player 11, but the Firefox browser does not the radio station lights up. Already had Internet Explorer as browser, which helped the radio station lights. What keeps the station playing now since I changed browsers?

  This has happened

  Each time Firefox opened

  == Two days ago, when I switched to Firefox browser

  the same problem with me 2

• updated to windows 10 Enterprise edition but now cannot restore windows 8.1

  updated for windows enterprise edition 10 but now can't roll back to windows 8.1 pre installed in my laptop but now neither the windows 10 is enabled nor have the convenince to roll back to 8.1.

  do I have to re install from scratch to go to 8.1?

  spidy_001

  Hello;
  
  Let me welcome you on the HP forums!
  
  Enterprise is a completely different animal than other Win10 versions and is NOT intended for personal use, but on the contrary, for commercial use - in situations where the operating system is installed and maintained by the it Department staff.

  So, it doesn't have the convenience of restore consumer versions.

  And Yes, since you didn't have (apparently) the foresight to make an image backup before installation of Win10, the ONLY way to return now is to do a factory reinstall using HP recovery media - and which erases the ENTIRE disc.

  Since you have not bothered to inform any PC, you need to check yourself if HP makes these available recovery media.

  It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs. You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update". If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entry and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  If HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• 10 Windows compatible printers: printer problems after the upgrade to Windows 10

  If you're wondering what HP printers are compatible with Windows 10, see this HP support doc: Windows 10 compatible printers.

  If you re having a problem with your HP printer after the upgrade of your Windows 10 PC, printer problems after upgrade to Windows 10 could solve your problem. He treats all kinds of questions such as:

  • Cannot print after upgrading
  • Cannot parse after upgrade
  • Printer software installation & screen opens instead of HP printer Assistant
  • "HP solutions Center can not run" or "Scan is busy or in use" error with a network connected printer
  • Multiple display of printer in the HP printer Assistant names
  • Can not scan or fax with HP Solution Center after that disabling HP programs to improve performance
  • "Access denied" error change HP Solution Center print settings
  • Cannot print with a pilot integrated Windows (Africa, Asia Pacific, Europe and Middle East only)
  • Fax device are not not in the devices and printers connected to a USB printer
  • HP Printer Wizard does not open with a USB connected printer
  • HP Smart printing does not open in Internet Explorer
  • "Error-2081883401' poster during the uninstall of the printer driver.

  In the compatibility Windows 10 doc, follow these steps to quickly locate your printer:

  Click and scroll down to the section for your printer, then hold down the CTRL and F keys. When appears in the search box, type the number of printer model to automatically find your printer. TIP: find the numberof the printer. For example, if you have a HP Officejet Pro 8600 Premium e-all-in-one printer, open the Officejet section and search for "8600" instead of "Officejet 8600.