LaserJet p2015 on XP cannot share on the network, Windows 8

Similar Questions

• HP Laserjet M1132 MFP is too slow on the network!

  Hello

  My HP Laserjet M1132 MFP is too slow on the network!

  I connect the printer to the windows XP 32 bits SP3 using UBS port. The printer works fine on the local computer, but when he shared on the network running too slow, for example with the print test page it takes about 45 seconds to print and other documents, it takes much longer.

  I installed the last form HP driver site and update the firmware it the latest version.

  It happens on other Windows XP machines as well.

  I have connected the printer to my laptop (Windows 7 64-bit) and it works very well (no delay on the network) and it seems that this problem have some relationship with the windows XP Driver.

  I used the trick of local port on computers remote (instead of the normal method) like this:

  "add a local printer.
  "new port".
  "localport".
  \\XPcomputer\HPPrinterName port name

  but still nothing!

  There is nothing wrong with the network, allows us to use a Samsung printer on the same machines on the network without problem.

  I really appreciate your HELP!

  It seems that no one on the planet has the answer to this question!

  The only available option is to upgrade your operating system to windows 7 (vista can work, I have no idea!).

  He wat the only solution for me.

• "Cannot connect to the network." When you enter the correct password for wireless network

  Hello

  I have the HP Photosmart C7200 all-in-One series.

  This seems relatively insignificant compared to some of the problems posted here, but nevertheless it is a problem.  I have a Verizon FiOS (Actiontec) router.  I am trying to connect to it wireless; the network key is using WPA authentication.  I followed all the instructions in the quick start guide.

  My printer detects my network and application authentication key.  I enter the correct key, the printer is trying to establish a connection, but after about 15 to 25 seconds, I get the error message, "cannot connect to the network.  I know that my key is correct; I connect to my router very well through several laptops, PDA, etc.  I have reset the settings network default manufacturer and tried without success.

  I don't know what kind of trouble shooting I'm supposed to do here.  The printer detects the router (albeit low signal strength) whenever I try to connect, I enter the password each time and I get the error each time.

  Your help is greatly appreciated.

  Edit: I printed the test report wireless network, here are the results:

  Radio on   PASS

  The radio work   PASS

  Ethernet cable not plugged in   PASS

  Network name (SSID found)   PASS

  Security   PASS

  The printer settings compatible with the configuration of the wireless router   PASS

  No filtering   IN CASE OF FAILURE

  Connected   Not work

  The signal strength   Very low

  Other networks detected matching you the network name (SSID)   NO.

  I know this sounds strange, but try changing channel by channel 11 of the wireless router.

• The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum)

  The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum).  I tried these solutions below, but it still does not:

  1. ensure that the printer is powered.

  2 disconnected then reconnected the power cable from the printer.

  3 unplugged then replugged the USB cable.

  4 checked Windows Firewall setting to ensure the communication of the printer is not block.

  5. restarted my computer.

  Please help me solve this problem.

  Thank you!!!

  Have you just tried reinstallling your printer yet? Even if it was working before, file corruption or other problems can sometimes be cured by doing this?

• Windows Live Safety Center: I tried to uninstall this annoying program on my pc. It's called PAV Personal Antivirus, rogue security software. He says its share of the Center Windows live safety

  I tried to uninstall this annoying program on my pc. It's called PAV Personal Antivirus, rogue security software. She says its share of the Center Windows live safety. His site is http; / www.3.ca.com/securityadvisor, not able to enter the site. Any idea?

  Hello

  Personal Antivirus is a fake antivirus, a scam to force you to pay for it while he has no advantage at all.

  How to remove Personal Antivirus (removal Guide)<-- read="">
  http://www.bleepingcomputer.com/virus-removal/remove-personal-antivirus

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Malicious removal tool from Microsoft
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  -----------------------------

  also install Prevx to be sure that it is all gone.

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp
  --------------------------------------------
  Here are some free scanners online help if needed:

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------

  Also do to the General corruption of cleaning.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Comments Win XP cannot connect to the network when Cisco VPN works on Mac

  Guest OS (Win XP) on the merger connects to the network, no problem. However, when I start a Cisco VPN on my Mac (not in the guest operating system) and then start Fusion/guest OS, the guest cannot connect to the network.

  I was able to use this configuration for a year on an old MacBook Pro (unibody). Last month, I got a new MacBook Pro and flying over my virtual machine image. I don't check for a few weeks. I'm sure I fly over the image correctly because everything else seems OK or if the IT guys doing something to block my traffic over the VPN.

  Config

  -Fusion - Version 3.1.0 (261 058)

  -Mac - 10.6.4

  So far, I have tried the following

  -started to merge and XP without VPN on Mac - OK (bridge autodetect)

  -launched VPN to work, and then launched Fusion - no network

  -tried ipconfig/release, ipconfig / renew - not always no network

  -tried NAT - do always no network

  Thanks in advance. For any help or suggestion will be greatly appreciated.

  Bernie

  The NAT value and then restart the virtual machine.  Works for me with the VPN client built into a cisco router.

  Do not work the real on 10.6.4 cisco software unless you really need to.

• HP Laserjet MFP M425 Pro: Cannot scan to the computer using MFPM425

  You just bought a new M425 MFP.  There is no functionality of "Scan to PC", rather) 1 USB-to-scan, scan) 2 to 3) Scan to Email or network folder.  I want to be able to use the function scan to scan directly to my PC and a pdf format.  There have been a few previous posts regarding the use of "Windows Fax and Scan" but who doesn't have a .pdf option.  Other posts talk about using "scan HP from your PC-software" is "HP scanning software" a separate download?  Other options?  Thanks for your help.

  Hello

  Scanning to a computer from the front panel is ot supported on many devices like the M425 Laserjet.

  If the printer is connected to the network, you can set a shared network folder and scan PDF out of the façade, a being defined as follows:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5096243&docid=emr_na-c03463750&docLocale=en_US

  If you prefer to use the installation of scanning software HP full software functionality on your PC, scanning can be started from the software scanning HP on your PC, and not the front of the printer.

  Full features software can be downloaded below:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5096245&swItemId=ma_104479_4&swEnvOid=4063#

  Then the HP scanning software will be available under the start menu > programs > HP > printers folder.

  Kind regards

  Shlomi

• Cannot share media files between Windows Media Player 11 and my Samsung Galaxy Tab, error: connection to server lost

  Original title: Media sharing between Samsung Galaxy Tab and Windows Media Player 11

  Why my Windows Media Player 11 share media with my Samsung Galaxy Tab?  As soon as it connects and I try to play a movie, I get an error message no connection or connection to server lost.  What can I do to share multimedia files on my Galaxy Tab without getting this message?

  Hi SylviaSkeeter,

  (1) if it works well before?

  (2) remember to make changes?

  (3) how you try to sync or share media?

  (4) what is you receive the exact error message?

  You can use the software provided by Samsung to sync media, or you can use Windows Media Player.

  Method 1: Disable the security software and verify afterwards; Follow the steps mentioned in the link below

  Disable the antivirus software

  If you use a non-Microsoft security software, you can check the documentation provided with the program to achieve this.

  Important: Re activate security software once everything is done.

  Method 2: See the steps mentioned in the link below that relates to a similar question

  The problems of synchronization

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-sync-problems

  For more information, please visit the links below

  Set-up-a-device-to-sync-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  You cannot share media between Windows Media Player 11 and DMR such as Xbox 360

  http://support.Microsoft.com/kb/925708

• LaserJet 5100 not listed is not on the network

  Our Laserjet 5100 tn was working fine, then it disappeared from the network (Mac) and cannot be restored, none of the machines on the network can see. The ethernet cable is fine. Is it likely to be the network card? The printer itself seems to be OK, and printing test pages.

  Y at - it no diagnosis I can do to determine where is the flaw?

  Grateful for any help.

  Still print the network configuration page?  If this isn't the case, then the card can be roasted.  If the printer has a second housing EIO, try to move the card (with the power off).  If it prints - check IP address to ensure that it has not changed.

• Cannot share screens with Skype Windows 8

  I can't share screens with Skype (Windows 8). I've looked everywhere but I couldn't find a solution for this.

  I tried: by clicking on the + button in a conversation as well as just by clicking on the contact and search for screen sharing button. See the two screenshots as an attachment.

  Can someone please help me to find the function of sharing screen on Skype version of windows 8?

  
  

  The application of the "modern" of Skype for Windows 8 does not yet support screen sharing.

  If you want to be able to use the screen sharing feature, then you must install the version of office 'normal '.

  The version of office currently last Skype can be installed here:

  http://www.Skype.com/en/download-Skype/Skype-for-Windows/

  [Updated updated Post by moderator to reflect the last update of Skype for Windows Desktop client]

• LaserJet Pro M127fn - failed to get on the network MFP

  I'm the wired network, but config report shows the ip address is 0.0.0.0. With the help of Windows 10. What ip address to use?

  Hi @kckeene117,

  I see that you are having problems, install the printer on a wired network. I will definitely do my best to help you.

  When the ethernet cable is connected to the printer and the router, the router is supposed to send an IP address to the printer automatically. (192.168...)

  Power cycle the router and restart the computer and the printer. You may need to try a different port on the router or another ethernet cable if you have not found an IP address. Check the connections at the back of the printer.

  Do you have Mac filtering on the router?

  What type of network setup you have and what is the brand name? (modem/router, router, switch)

  Check if you have a valid IP address.

  Here is a document to set up the printer on the network.

  Configure the printer to a wireless or wired network for the HP LaserJet Pro MFP M125, M126, M127, Color LaserJet MFP M176 Pro and and M177 Printer series.

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• Cannot depend on the network discovery and streaming media

  I use Win7 Pro., SP1.

  Some time ago, the I realized that I can not use home network more. I can't turn on my discovery of home network and streaming media. The network discivery always returns OFF.

  The following services are all on (automatic): support TCP/IP NetBios and DNS Client, Function Discovery Resource Publication, SSDP Discovery.

  Please notify.

  Hello Dudi,

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  I also know that the inconvenience that you are experiencing because of the discovery of the network and streaming media problems. I'm going to

  certainly will help.

  Network discovery is a network setting that determines if your computer can find other computers and devices on the network and whether other computers on the network can find your computer.

  This problem can occur because of incorrect network discovery and streaming media settings.

  For network discovery, I suggest you use the steps in this article and check if it helps.
  Reference:
  You can't turn on the discovery of network and Sharing Center in Windows Server 2008, Windows Server 2008 R2 or Windows Server 2012
  https://support.Microsoft.com/en-us/KB/2722035
  (Also valid for Windows 7)

  For media streaming, refer to the suggestions of gifted xI replied on 24 December 2010 and check.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/cannot-turn-on-media-streaming-another-Windows-7/b765ec7a-8c7a-4147-8645-fedc3a5fc991

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Z10 blackBerry cannot connect to the network mobile/phone on Z10

  Please, I am unable to connect to the mobile network. cannot make or receive calls.

  whenever I restart the unit on Black berry z10, it resets the date and time of the year 2015 instead of the year 2016.

  It has been a challenge after that my camera has been upgraded to 10.3.2.2836

  Please I need your help

  As a last resort, I would use an autoloader to reload the operating system.  If this does not work after that then it is a hardware failure, or the device is not compatible with the networks in your area.  Assuming that this worked before and suddenly left leads me to believe that it's a hardware problem.

  http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

• Windows 7 Pro cannot connect to the network when idle too long (large company)

  We have approximately 75 users on Windows 7 Professional.  About two weeks ago (and the next day, Windows updates have been deployed to all PCs in our outside IT), the vast majority of users (but not all) have started to have a problem in what they can connect first thing in the morning; However, they immediately get an error that are not connected to the network, that network drives can be connected, they cannot access the internet, etc.  A reboot solves problems and the problem will not recur until the computer is left idle during the night.  Our outside IT says that what is happening on several client sites that they manage, but they have no idea of the cause; they are theorizing that it's maybe a botched Windows Update.  I have Windows 7 Pro at home and did not have the problem once.  Any suggestions appreciated.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Cisco ASA 8.4 (3) remote access VPN - client connects but cannot access inside the network

  I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well

  Thank you

  interface Ethernet0/0

  Speed 100

  full duplex

  nameif outside

  security-level 0

  IP x.x.x.x 255.255.255.240

  !

  interface Ethernet0/1

  Speed 100

  full duplex

  nameif inside

  security-level 100

  IP 10.88.10.254 255.255.255.0

  !

  interface Management0/0

  Shutdown

  nameif management

  security-level 0

  no ip address

  !

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  network of the PAT_to_Outside_ClassA object

  10.88.0.0 subnet 255.255.0.0

  network of the PAT_to_Outside_ClassB object

  subnet 172.16.0.0 255.240.0.0

  network of the PAT_to_Outside_ClassC object

  Subnet 192.168.0.0 255.255.240.0

  network of the LocalNetwork object

  10.88.0.0 subnet 255.255.0.0

  network of the RemoteNetwork1 object

  Subnet 192.168.0.0 255.255.0.0

  network of the RemoteNetwork2 object

  172.16.10.0 subnet 255.255.255.0

  network of the RemoteNetwork3 object

  10.86.0.0 subnet 255.255.0.0

  network of the RemoteNetwork4 object

  10.250.1.0 subnet 255.255.255.0

  network of the NatExempt object

  10.88.10.0 subnet 255.255.255.0

  the Site_to_SiteVPN1 object-group network

  object-network 192.168.4.0 255.255.254.0

  object-network 172.16.10.0 255.255.255.0

  object-network 10.0.0.0 255.0.0.0

  outside_access_in deny ip extended access list a whole

  inside_access_in of access allowed any ip an extended list

  11 extended access-list allow ip 10.250.1.0 255.255.255.0 any

  outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1

  mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool

  NAT static NatExempt NatExempt of the source (indoor, outdoor)

  NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3

  NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search

  !

  network of the PAT_to_Outside_ClassA object

  NAT dynamic interface (indoor, outdoor)

  network of the PAT_to_Outside_ClassB object

  NAT dynamic interface (indoor, outdoor)

  network of the PAT_to_Outside_ClassC object

  NAT dynamic interface (indoor, outdoor)

  Access-group outside_access_in in interface outside

  inside_access_in access to the interface inside group

  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

  dynamic-access-policy-registration DfltAccessPolicy

  Sysopt connection timewait

  Service resetoutside

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto-map dynamic dynmap 10 set pfs

  Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1

  life together - the association of security crypto dynamic-map dynmap 10 28800 seconds

  Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000

  Crypto-map dynamic dynmap 10 the value reverse-road

  card crypto mymap 1 match address outside_1_cryptomap

  card crypto mymap 1 set counterpart x.x.x.x

  card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1

  card crypto mymap 86400 seconds, 1 lifetime of security association set

  map mymap 1 set security-association life crypto kilobytes 4608000

  map mymap 100-isakmp ipsec crypto dynamic dynmap

  mymap outside crypto map interface

  crypto isakmp identity address

  Crypto isakmp nat-traversal 30

  Crypto ikev1 allow outside

  IKEv1 crypto ipsec-over-tcp port 10000

  IKEv1 crypto policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 1

  life 86400

  IKEv1 crypto policy 50

  preshared authentication

  the Encryption

  md5 hash

  Group 2

  life 86400

  IKEv1 crypto policy 60

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 70

  preshared authentication

  aes-256 encryption

  sha hash

  Group 1

  life 86400

  IKEv1 crypto policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  Console timeout 0

  management-access inside

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal BACKDOORVPN group policy

  BACKDOORVPN group policy attributes

  value of VPN-filter 11

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelall

  BH.UK value by default-field

  type tunnel-group BACKDOORVPN remote access

  attributes global-tunnel-group BACKDOORVPN

  address pool Admin_Pool

  Group Policy - by default-BACKDOORVPN

  IPSec-attributes tunnel-group BACKDOORVPN

  IKEv1 pre-shared-key *.

  tunnel-group x.x.x.x type ipsec-l2l

  tunnel-group ipsec-attributes x.x.x.x

  IKEv1 pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  Excellent.

  Evaluate the useful ticket.

  Thank you

  Rizwan James