LaserJet pro m127 fn: impossible to analyze by using HP all-in - One Printer Remote android app.

Similar Questions

• Impossible to copy and scan on all-in-one printer, HP Deskjet F4180.

  I can't make a copy and scan on the surface of the glass of my printer HP deskjet F4180 all-in-one. The printer says: error in the copy menu and seeing red flashes on color and black. However, I am able to print from my laptop and a pop-up message would be in my laptop showing the ink cartridges (black and color) are placed incorrectly. Check the ink cartridges, both are in their right place and broken up. Need help... Please.

  I found this document which decodes what mean flashing lights.  There are a lot of different codes described, but I found a heading "question: one or two of the lights blink check print cartridge" which seems to be what's going on your printer.  Basically it's saying that the cartridges are out of alignment or defective.  If the document is not help clarify, let me know and I'll see what I can find.

• HP Officejet Pro 8600 e-all-in-one printer - N911a (cannot control the size of the item being analyzed).

  Hi all

  HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)

  My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.

  Is it possible to implement on this 8600 or am I missing something?  Any help or ideas appreciated.

  Thank you

  Glen

  Hi oorwill44,

  Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?

  Please take a look here: how Scan: Windows XP

  I hope this helps, let me know if you have any questions.

  Thank you

• Software all-in-one printer HP LaserJet Pro CM1415nfw does not load

  Software solution complete all-in-one printer HP LaserJet Pro CM1415nfw (CD or download) does not correctly load on my desktop running Windows 7 Professional 64 Bit. After I bypass payment the contract of the software, loading software hangs on the 70% mark and I get the following message:

  "Error message: a problem occurred during the preparation install the software." If please restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. MSIExec command: /i "C\CM1410_MFP_Series Solution\Setup\Core\SIPM_64 based |" HpTcpMon64.msi"/qn REBOOT = ReallySuppress Path: return code: 1603"

  The CD software did load on my laptop which runs on Windows XP, SP - 3.3 and the printer works as expected.

  Uninstall other software printer and disconnect them. Then try to load the new software first.

• I FORGOT the ADMIN PASSWORD FOR - (WEB PAGE) - HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

  Hi all

  I changed my network SSID & PW but I forgot the password for the printer web page.

  Password was written in a notebook and notebook is moved at the moment by the cleaning person.

  Please HELP! Is there anyway I can reset the printer so that the admin password is also re-set. I try to reinstall the software printers, also I am not able to change the ip address and right now, there is no ip address... get no link and no ip address and no network... Please anyone who can help... Please help.

  * I read some part... to power off the printer, then press the power button on... and continue pressing the back button where he would have, for some time the printer is back back (it was to reset the printer)... which is about 23 times... zero.

  I really want to THANK you ALL for READING THIS & YOUR TIME. So please help if you can...

  and ideas?

  Thank you, xxVEGASxx

  * xxVEGASxx *.

  You can do a reset of the printer using the LED screen on the printer.

  Select Configuration, then Tools, then restore the default settings. "Restore default settings" is the last element of the list and you will have to scroll down to see it.

  Which erases all settings, including the password for the printer.

  To reset you describe is probably the one mentioned in this article:

  http://resetprinters.com/how-to-reset-the-HP-OfficeJet-Pro-8600-premium-all-in-one-printer/

  but it's probably a deeper reset that you really need anyway.

  -Seth

• I bought a WF-2650 epson all-in-one printer and am trying to find a replacement for QuickTime so that I can download a video. I have a MacBook Pro computer. Where can I get something instead of QuickTime?

  I bought a WF-2650 epson all-in-one printer and am trying to find a replacement for QuickTime so that I can download a video. I have a MacBook Pro computer. Where can I get something instead of QuickTime?

  Can you explain what a printer has to do with the download of the videos?

• I have a HP Officejet Pro 8500 a Premium e-all-in-one printer - A910n.

  I have a HP Officejet Pro 8500 a Premium e-all-in-one printer - A910n.  I'm trying to Connect HP series, but every time I create and account it tell me to log in using my password of Snapfish.  When I use my password for Snapfish "valid", it comes to request return "invalid password".  How can I fix it?

  If I'm not on the correct Board, please let me know which one I should use.

  Thank you

  Hello. You're on the good advice!  Unfortunately for correcting the offset account problem you meet you share personal information.  To protect your identity and your account security, I will private message you with what HP will need to get your accounts connected HP/Snapfish synchronized upward in order to use web services.

  Thank you!

• Misalignment of the heads - Officejet Pro 8500 has more e-all-in-one printer A910g

  Oops.  Typical message in subject line.  I'll try again.  I have an Officejet Pro 8500 has more e-all-in-one printer A910g.  I replaced my cartridges of ink three colors, and cannot print, print jobs are in the queue... and I get an error message on the display screen 'alignment failed.  Refer to the documentation for the device for more details. "Also, even though the level of ink Cyan poster now full on the screen, I get no blue on the print head alignment test document.  Help!

  I'm sorry that you are experiencing this issue. Sometimes, when you get this error message, maybe it's the ink or printhead may need to be cleaned.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c02207121

  Let me know if it helps. This isn't a software problem, you do not have to uninstall the software and things of this nature.

• Can't scan on HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar?

  How scan you on an HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar? Whenever I try, I get the following message:

  Error message: Scanner reported an error - unable to open a session on the device.

  Hi Irossga,

  This document explains how to use the built-in features to your operating system to scan photos and documents.

   

• cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

  I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

  Any help is appreciated!

  Hello NRHII,

  Welcome to the HP Forums!

  I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

  (1) turn off your printer
  (2) unplug the power cord at the back of the router
  (3) restart your computer
  (4) wait less than 60 seconds, reconnect the power cord to the router
  (5) turn the printer, wait for the computer to turn on

  The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

  1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
  2. Tap the Installer icon ( ).
  3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
  4. Tap the name of your network and then press OK .
  5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

• HP Officejet Pro 8500 has more e-All-in-One Printer - A910g. -Fax Confirmation Page

  I have the HP Officejet Pro 8500 has more e-All-in-One Printer - A910g. It works very well, but how to make a page of confirmation by fax, with the impression of a miniature of the 1st page of the document I sent?  I checked the configuration information, but apparently not have indications confirm that I sent the fax through the confirmation page with a small impression.

  Hi dtaylor569,

  Follow the instructions below.

  To activate the fax confirmation
  1. press the arrow to the right and select Setup.
  2. press on the configuration of the fax, click Fax reports.
  3. press on the Confirmation Fax.
  4. tap to select one of the following options.

  • Discount - does not print a fax confirmation report when you send and receive faxes successfully. It is the default setting.
  • (Fax Send): Prints a report of fax confirmation for each fax you send.
  • On (fax) - prints a report fax confirmation for each fax that you receive.
  • On (Send and Receive) - prints a report fax confirmation for each fax that you send and receive.

  Prints a report of fax confirmation for each fax that you send and receive.
  To include an image of the fax on the report
  1. press Setup.
  2. press on the fax, click Fax of Confirmation reports.
  3. tap on (fax) or we (send and receive).
  4. press on the Fax Confirmation with the image.

• HP Officejet Pro 8620 e-all-in-one printer windows 8

  Printer e-all-in-one-HP Officejet Pro 8620 Windows 8.

  wireless printer is. printing from iphone is OK

  Since my PC win 8 not sending a file to filesgo-printer - printer not respongding - no message.

  I have install new printer 8620 on 8600 series of drivers printer or printing only from my PC

  How can I fix the thanks of printing problems

  Hi @yosiwajcenberg , welcome to the forums there.

  I read your post on your Officejet 8620 do not print for you, on your system Windows 8. I suggest you try the following steps.

  1. go to your control panel and uninstall your printer.
  2. hold your key to Windows and the R key on your keyboard to invite the run dialogue box.
  3. Type "coil" and press enter or click OK.
  4. Select and open the drivers folder, select the x 64 folder if you have a 64-bit operating system or the w32x86 if you have a 32-bit operating system.
  5 open the 3 folder, locate the HPBXPSRENDER. DLL file and rename it to HPBXPSRENDER. OLD
  6 reinstall the printer: HP Officejet Pro 8620 e-all-in-One Printer series full feature software and drivers

  I hope that helps!

  Have a nice day

• OfficeJet Pro HP All-o 6978: HP OfficeJet Pro all-in-One Printer 6978

  The all-in-one printer HP OfficeJet Pro 6978 does printing on thick paper?  I see in favor "thick, plain paper", but do not know what it is.

  Thank you.

  Hello

  Thank you for using the HP Forums.

  Please refer to the form, it does not support some cardstock:

  http://support.HP.com/us-en/document/c05061732

  Thank you.

• HP Officejet Pro 8600 e Plus: HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g and instant ink

  Morning

  Does anyone know if the HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g is compatible with the instant the ink program?

  Thank you

  Stuart

  @StuartTunstall

  Welcome to the HP Community Forum - we are a community of fans of HP !

  It seems that your printer is not eligible.

  Connected - HP Instant ink > FAQ > my printer is eligible for the moment ink HP?

  I also checked the datasheet for your printer and did not find any indication of instant support of ink.

  Time for a new printer HP brilliant?

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• OfficeJet Pro 8600 +: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

  Install HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g January 2013.  No idea what happened but, lately, get an error message and asks to run Device Manager.  Even uninstalled the printer and re-installed but same error.  In the device, yellow icon with exclamation point Manager.  If I click on it, you will see the message:

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  If I click on put updated driver and click Browse online: Windows not found driver software for your device.

  If I select Browse CD - error of installation is not recommended because Windows cannot verify that it is compatible with your device.  CD provided with your stupid printer!

  3 year old stupid printer and cannot find a way to solve the problem!

  Hi hope,

  Thank you for answering my questions! Please, try the steps in the following order:

  • Uninstall the software. Uninstalling the printer software.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. Turn Windows Firewall on or off.
  • Create a new user account. Management of accounts of users and connections (Windows 7).
  • Reinstall using the printer HP install wizard for Windows.

  Then restart the HP print and Scan Doctor and let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope that these steps don't solve your problem and have a nice day!