No FN on Satellite A200 key after installation of Vista Business

Similar Questions

• After installation of Vista business, I have the folder Windows and Windows.0. Can I delete one of them?

  Dear Sir or Madam,
  After installation of Vista business, I have the folder Windows and Windows.0. Can I delete one of them? How can I check that I can delete to free up space. Windows folder takes GB 10.00 and file Windows.0 contains 26.3 GB. Thank you much in advance.

  Noppamas.k

  Mat9

  You can simply DELETE THE WINDOWS. O file if your computer is running norml:http://support.microsoft.com/kb/933212
  This will give you more space.

  If your computer does not correctly him follow these steps:

  The single was is to back up all you produce, programs, data, but does not back up the WINDOWS. O file. You can delete the folder before making the back-up. Back to the top of your files before you begin reinstalling Windows, even if you're reinstalling Windows on a hard disk partition. A clean installation replaces the current version of Windows and all personal files

  On start-up MODE MINIMAL step #7 you want to make sure that DELETE you PARTITIONS
  It will give you an option and a list for delete you old partitions

  CLEAN BOOT

  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

• How to turn on WLAN on Satellite A200 - 1 M 8 with Vista operating system

  How to enable the WLAN on Satellite A200 - 1 M 8 with Vista OS, FN + 8 does not work

  Make sure you wireless switch on the side of the unit is on. Click Start-online panel-online network and sharing Center => manage networks wireless (on the left) click the little more beside the word 'Add' => select 'connect to a network that is in range of this computer' => you will see a list of networks that are in range so, select the one you want and enter the encryption key if it is a secure network

• I have the genuine product key genuine microsoft windows vista business but I have lost the cd/dvd of the windows disk, how to manage another copy of windows vista professional?

  I have the genuine product key genuine microsoft windows vista business but I have lost the cd/dvd of the windows disk, how to manage another copy of windows vista professional?

  If you bought the retail of Windows 7:

  How to replace Microsoft software
  http://support.Microsoft.com/default.aspx/KB/326246

  If Windows is preinstalled with the computer:

  If you do not install disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

• Some keys no longer work on Satellite A200-196 after Windows 7 update

  Hi all, I've just upgraded computer laptop of my partner (a Toshiba Satellite A200-196) to Windows 7 after you initially install Windows XP on it (it came with Vista).

  After the XP update, I noticed that some keys were not working. I don't remember the process that I used to solve the problem, but the difficulty that I did, and they were all soon works perfectly. So this is a software problem and not material. I think he might have something to do with the FN key - but I can't be sure.

  Now, I just upgraded the same machine and I have exactly the same problem. Keys that don't work are Backspace, O, P, F, H, K and L.

  Can anyone help please? I tried to reinstall Win7 and the problem is still there.

  Thank you very much

  Andy

  > The keys that don't work are Backspace, O, P, F, H, K and L.

  These keys have nothing to do with the missing software.
  Indeed, the function key (FN key) needs a Toshiba utility particular installation / software to make it work, but the keys Backspace, O, P, F, H, K and L are common keys on the keyboard that don t need no special software.

  That's why I think that the problem is hardware related: simple keyboard malfunction.
  I guess that all of these keys work correctly if you sign in and use the external USB keyboard.

• Satellite A200-1AS - after you have reinstalled the blinking cursor

  Sorry for my English.

  Hello people
  I have a laptop Satellite A200 - 1AS PSAE0E - 025006GR,
  now, I wanted to format everything because I find very slow.

  Unfortunately I don't have the recovery cd not, and the 0 key does not work.
  Also new vista dvd buy code (recover partition not resolved vista partition) fine. But when you restart all black blink single slider.
  Downloaded drivers robson - unpacked 20070919162555.zip and during the next installation vista driver is loaded (which was eye appear as incompatible but no matter) Intel 82801 GR / GH SATA AHCI and still nothing...

  Could someone give me a tip?
  Thanks in advance

  The robson - 20070919162555.zip driver contains the SATA driver in the folder
  Robson Winall Driver package

  

  You will find the .ini, .dll files that must be added during the installation of Vista Setup.
  But first you must make sure that the HARD drive is recognized in the BIOS (first page)

• Satellite A200 - 1 H 2 with Vista does not work after restoring

  How-dee!

  I have a laptop Satellite A200 - 1 H 2 with a Windows Vista Home System.
  Computer was never connected with the Internet and I use it only for the doc write, play music and watch movies. It worked fine up until yesterday.

  After turning on, there was a massage "c:\windows\system32\cmd.exe" corrupt (spleen? Sorry, I don't remember).

  So, I used the product Toshiba Recovery DVD and after reinstalling system reboot. And now I have a "Startup Repair" massage, which is:
  "Windows cannot repair this computer automatically" and below:
  "If you have recently attached a device to this computer, such as a camera or portable music player, remove it and then restart the computer. If you continue to see this massage, contact... blah, blah, blah. .... Click Finish to exit and turn off your computer.

  It's weird cos I have no device connected to my computer and it was during my recovery system.

  After pressing on "discovers the diagnostic and repair details" another pop-up window shows and he says, that all test "completed successfully" (the last is "Control of State Setup") and who
  "Root cause found.
  --------------------------
  Failure so that the Setup program is underway"

  What should I do now? I don't have any bootable Windows Vista DVD.

  Please heeeeelp!

  PS. Sorry for my poor English :)

  That s odd and I assume that the laptop would be correctly after reinstalling the Toshiba Recovery disk
  However, maybe that something was wrong during the first attempt

  Try using the recovery again disk and try reinstalling this cell second time

  Good luck

• Re: Satellite A200: Question about the Windows Vista serial key

  I have a Toshiba Satellite A200 and I doubt, in everest, I can see the key of Windows Vista, but it's different to the Windows key in the tile to the bottom of the laptop.
  I change anything in the laptop because I bought, I have use once the recovery cd, but I have not a pirate key or something like that.

  Why this different key?

  Post edited by: Admin

  I agree with the user above.
  The serial key you will find at the bottom of the device is not similar to the serial key that can be read using a few 3rd party applications!

  But you don t need such series on your Toshiba laptop key.
  The restore CD contains an image of Toshiba which is already activated!

• Satellite A200 freezes after 5 minutes of use

  -> Satellite A200 laptop
  problem->
  (1) freeze after 5-7 minutes of use only when the laptop is load
  2) works on safe mode without problems
  3) works fine on normal mode when it is not supported

  Hello

  I think you should test the memory modules.
  The memtest software is OK, but not perfect. You know
  Even though the memtest would not detect any errors, the problem of the ram is possible
  Otherwise, it could be a motherboard problem too.

  I had a problem in the past, my book of 8 years froze only if adapter was attached to only if the html files were executed.
  Finally the mobo was replaced, and this fixed the problem.

  What internal temperature? Maybe it's at a higher temperature?
  Clean the vents with air... stream could help get better air circulation...

• Satellite A200-1CR: can I install Vista using my Vista DVD installations?

  Hello

  I would like to get some answers to my questions...

  I have the satellite A200-1CR (PSAE0) and I want to install vista on my own... not with the recovery DVD but I have some serious questions...

  (1) may I have problems during the installation... (Drivers SATA, etc.), problems of BIOS or Toshiba has no restrictions?

  (2) what problem if I erase the secret (winre) partition and what is its purpose?

  (3) if I do a clean install with my DVD with my vista... If I want in a future close that I can use the recovery DVDs I got it or not?

  (4) to the drivers section for my laptop for each part has 5,6,7 or 8 drivers for win vista... which is good, or it's all the same?

  (5) in general, what do you propose? Are there reasons why not to do my format? I did a large number of formats in desktop, but never in the notebooks.

  Sorry if you tired with my questions and sometimes my bad English...
  Thank you in advance...

  Why not.

  As to the question;

  (1) possibly the Vista operating system does not recognize the HARD drive during the installation of the OS. In this case you must install storage Intel Matrix (Robson package) Manager first! It of a driver SATA and can be found on the Toshiba or Intel driver page.

  (2) Windows recovery environment (WinRE) is placed on the hidden partition and it of necessary to restore a damaged operating system.
  The Vista operating system automatically creates the hidden partition and Windows re installing the OS.

  (3) Yes, you can use the Toshiba Recovery CD. But it erases the entire HARD drive always.

  (4) take a newer version

  (5) generally I put t see any reasons to get in shape. The preinstalled Vista operating system has been configured and all the tools of Toshiba, drivers and additional software should work very well.
  I don't recommend a new format if the operating system is working well.

  Good bye

• Satellite A200 freezess after 3-5 seconds

  I have a laptop Toshiba Satellite A200 and is not power on the right.
  The fan starts to turn, the power lite lights up blue constantly. Then after 3-5 sekonds the fan stops and then the power lite flashes: two times blue then red twice. And the freezzes of the laptop. Could flashing what it means.
  I think that this is a partnership for the problem. I already deleted the bios, it does not help.

  Removed the battery. Also removed from the bios battery.

  Can someone help me know what means the flashing?

  Hello!

  It is really strange and I've ever heard on an issue also, but in your case I would try to remove the CD/DVD drive and HARD drive and then try again.

  You have external devices connected to the laptop or the LAN cable, the mouse, the keyboard or something else? If so, delete all and try again.

  In the worst cases, you should contact an ASP and follow the link posted by Luke to find a.

  Good bye

• Satellite A200-237: Visat Installation without formatting the two partitions

  Yesterday, I installed Windws Vista and all other software for my Satellite A200-237.
  A has 2 partition of my drive hard C and E.

  I used E for my files just like I did with my computer laptop formar.
  And when I installed windws xp that I formatted only C and E remained as it was, so I've always had my files on my laptop. I did the same with my formatted partition C AND e. visat toshiba and vista and unfortunately I lost all my files and I now have the partition C and F instead of C and E.

  Is it possible (for the next time I re install vista and format the hard disk) without format my second partition?
  Is this possible or do I really have a second HD?

  I do not remember Vista asking me what partition I want to format and with XP, I had that choice.
  Help, please.

  Hello

  Well. Usually it of possible, but only by using the original CD of Windows Vista.
  Then, you choose the partition where the operating system must be installed.

  Using the recovery CD all partitions will be deleted simply said; the recovery CD formats the entire HARD drive and you will lose all the data stored on the partitions

• Satellite A200 - BSOD after downgrading from Win Vista to XP Pro

  HII

  I bought a Satellite A200.
  The windows vista family edition was the operating system that was installed.
  Compatibility issue with a particular software that I use, I changed the vista by a XP Professional SP3.
  But since then, the computer crashes and present a blue screen. I wish I had some ideas to solve this problem.

  Thank you

  Hello

  The BSOD can be caused by the problem of hardware and software problem.
  In your case it seems s due to software problem. Maybe a few compatibility problems between certain parts of the software

  First you need to check if you are using the version of Win XP BIOS Yes this laptop needs a Win XP BIOS, which could be found on the European driver Toshiba page.

  I m also interesting when the BSOD appears you installed Win XP successfully or it was not possible to install the XP because the BSOD?

  If you were not able to install Win XP then I guess you don't have included SATA drivers participating in the crib on Intel Matrix Storage.

  I recommend some threads here in the forum about this theme.

• Personalization of media (6 button series) - Satellite A200 keys

  I have a Satellite A200 - 1 M 8 (PSAE6E). It comes with 6 buttons of media (then on on / off button). Now, I managed to affect the inet and media buttons of player for Windows media player (WMP) and apps that I normally use instead of Internet exploring, however, as I understand it the buttons "play", "stop", "rew" and "ff" only work with WMP, because if I use Winamp for example they do not work. Where is there a way to do their work with Winamp or any other simillar application?

  I have seen posted in this forum for a solution to this problem where hotkey.exe has been patched to work with Winamp, however, it does not for me also because I do not have a process called hotkey.exe and therefore it can not be corrected. Has anyone found another way to solve this problem?

  P.S. I have Vista Business installed.

  Hello

  I use WinAmp too and for me it will also be interesting to find an opportunity to use the media, but of course there is no plug-in for the new laptop models. I checked some forums but for the moment, there is no solution. Even on WinAmp forum there's nothing on this subject. :(

• Satellite A200-13R: after installing the XP cannot use external microphone

  Hello

  I have A200-13R which comes with Vista Home Basic. Like most of my works under XP, I don't feel comfortable with vista. So I installed win Xp pro as a dual operating system. and I hv installed all the drivers downloaded from the Toshiba site.

  But when I use yahoo or other messengers system isn't identify if I plugged the external microphone. It uses only the inbuild mic with the system. I forgot to install something?

  Experts please help.

  Hello

  First of all there is no specialists but simply Tosh user ;)

  > I forgot something to install

  I put t think you forgot something to install. Only the audio driver is needed to get the sound and mic work.
  I presume that it s just a matter of adjustment.

  I recommend to check the microphone settings in the-> sound and audio devices Control Panel
  In the single tabs as audio and voice please check if the microphone has been selected.

  In addition, please be sure that mute mic worked in volume-> advanced-> control of the microphone.

  This will disable the internal microphone! To activate the external microphone, you must press the button advanced under the micro controller.
  In the new window called Advanced controls for microphone, you will need to activate select MIC2 and Mic Boost.

  Best regards