Green and blue channels picture recording only

Similar Questions

• Qosmio F30-117 - green and blue lines on screen

  Then my F30-117 worked well recently until I turned on and had green and blue lines (kind of like scan lines) straddling the fence.
  I tried to install the new drivers from nvidia, but that has not worked, as Vista comes to pick up their as unknown.

  Anyone who has a solution? Don't you think that the graphics card needs to be replaced?

  Thanks in advance!

  -Eric Zehetbauer.

  You can easily determine what's the reason for this.
  Do you know how?

  Simply connect an external monitor to the laptop and check the top image.
  If you have the same problem on the external monitor, the reason is the graphics card or motherboard, otherwise it s a display problem internal.
  Check it!

  In addition, you should only use the drivers from Toshiba. The Nvidia drivers don't have a for the graphics chip overheating protection could be damaged. It s on your own risk.
  So, try to install the drivers of Toshiba.

• Green and blue flickering thick vertical and horizontal line with windows media player

  Original title: green and blue flashing

  Windows Vista

  Windows Media Player
  I have a problem with windows media player. I have a green and a blue flashing thick vertical line. And also a green line below horizontal. Why?
  Help!

  Hi bjorn81,

  1. when exactly you get these lines?

  2. This occurs when you try to play videos?

  3. If so, what is the type of file you are trying to play in Windows Media Player?

  4. What is happening with all the video files or a particular video file?

  If the problem affects all or most of the video files you play (as opposed to a few specific files), the software of the driver for your video card (also known as a graphics card, video, graphics card or graphics card) may be outdated.

  Play an audio or video file: frequently asked questions - what can I do about video problems, such as green or pink lines appearing in the flickering or choppy video, the player will stop responding during video playback and so on?

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

  Also check out the link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information helps.

• What does green and blue line above the average of the Finder?

  Hi all!

  I have a question about something I noticed recently: a blue and green line on the Finder in the Dock icon. He has been there for a week.

  What's weird, is that it has nothing to do with my screen faulty because it disappears when I hide the Dock or use an app in full screen. I tried to restart my computer.

  It is a picture of what it looks like to...

  

  Could someone please help me find what it means and how to remove the line, please?

  Thanks in advance!

  Mac OS X 10.11.2

  Intel Core i5 at 2.7 GHz

  8 GB 1867 MHz DDR3

  Hi, C.Lehua.

  Please visit Apple support communities.

  I understand that you see the colored on the Finder icon lines.  Let's start by a NVRAM reset, and then adjust the display resolution to see if there is no change.

  How to reset the NVRAM on your Mac.

  OS X El Capitan: set the resolution of your screen

  See you soon

• I can see the highlights in each color, but yellow, green and blue.

  If if I try to highlight the text with one of the following colors does not color: yellow, yellow, green, green, blue and light blue.

  

  If I right click on the highlighted text and format the highlighting of a different color (for example, a darker yellow), I'll see the color.

  

  If I switch to one of the 6 colours or any variation (by clicking on "other colors" and adjusting the luminescence in the color wheel to something near a yellow or pale yellow for example (< = brightness 105)) the color will disappear and I'll only see the dotted lines of the highlight when selected.

  This makes unnecessary functionality to compare documents that I receive a document marked with dots highlights "without color".

  Does anyone have suggestions as to how I might solve this problem?

  Solved. I found the answer elsewhere. Go in Edition > Preferences > accessibility. Uncheck "replace the colors in the document.

• Text vs iMessage (green and blue)

  When I send a text to a particular person turns green (text) but when they text me I get blue (iMessage). It appears a two different conversations. Why is this and how do I default iMessage?

  The other party must also activate iMessage on their iDevice.

  If peripheral the other party is not an iDevice, SMS will be used (green text bubble)

• ThinkCentre A55 - green and blue slot memory upgrade?

  I have a thinkcentre M55 and I decided to add 2 GB memory module to existing 1 GB. My question is: I have memory locations two, one blue and one green. Is there a difference beetween them?

  so you usf or usff M55, then there is no difference, they can accept a maximum of 2 GB for a total of 4 concerts through the two slots.

• How can I remove the check marks green and Blue &#62; &#62; from the corner of the preview in Explorer icons

  After a recovery of the graphics system icons in Explorer have the ANNOYING blue and green checkmarks > into little squares at the bottom left of each icon.
  How can I get rid of these?

  Norton backup status indicators,
  http://www.Winhelponline.com/blog/green-tick-or-blue-arrows-icon-overlay-displayed-for-files-in-Windows-Explorer/

  http://www.Winhelponline.com/blog/wp-content/uploads/Norton360-2.jpg
  Mozy backup,
  http://support.Mozy.com/support/mozyKnowledgeBase?docid=78225
  http://support.Mozy.com/support/mozyKnowledgeBase?docid=77353

  Carbonite,
  http://Carbonite.custhelp.com/app/answers/detail/A_ID/1344

• Resolution and display set by recording only not to restart.

  Win7 Pro SP1

  Radeon HD 5450

  Gigabyte M61PME S2 Bios F2

  Whenever I restart, I have to reset my screen resolution of 640 x 480 to my preferred setting (1024 x 768). In addition, my configuration to display the desktop duplicate must be reset.

  My main monitor is recognized as Philips 190p and secondary Sony TV.

  I have the latest video driver from AMD, and I did not Live Mesh installed at all.

  I know that I'm not the only person having this problem, but no solutions suggested in other threads have worked for me yet.

  I tried a clean boot, without success.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\DISPLAY shows 3 displays in addition to the monitor by default (PHL081B, PTS03DA and SNY0902) but I am naturally reluctant to play with the registry!

  This is a brand new Win7 installation and the problem is present since installation.

  The problem seems similar to the http://tinyurl.com/mh57v2u thread. Comment by Varun J he suggests a lower resolution on the secondary monitor, but I doubt that a modern 26 '' Sony is limited to 640 x 480!

  I have not confirmed this user comment about what is happening on logoff (as I am in the middle of typing!) and I've not updated bios or mobo driver again, because I would rather not mud autour with the innards of the machine if there is a simpler solution.

  More info? Ask and you will receive, if that's the extent of my ability!

  Hello Matt,

  You can try the steps below and see if that helps.

  • Log the computer by using an account with administrator rights.
  • Click Start, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  Note If you are prompted for an administrator password or for confirmation, you must type the password or provide confirmation.

  • On the Startup tab, uncheck 'vidéo Base' option, if it is checked.
  • Save the changes and restart the computer and see if the problem still occurs.

  If you have any view control installed applications such as Catalyst Control Center, check if there is any of the predefined profiles that are defined.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• on a page how do you get three strips of color yellow and blue grreen

  {body
  Width: 100%;
  min-width: 1100px; / * container * /.
  Auto margin: 0; / * Centers page * /.
  padding: 0;
  background: #FF3;
  Color: #000;
  font: 1em/1.5 ' Lucida without ","Lucida Sans Unicode ";
  }

  This makes me a yellow background, but how to change to add a green and blue band on the bottom

  HTML, body {}

  height: 100%;

  }

  {body

  background:-moz-linear-gradient(top, #f2e530 0%, #f2e530 32%, #1ebf41 33%, #1ebf41 66%, #207dc9 67%, #207dc9 100%).

  background:-webkit-gradient (linear, left top, left bottom, color-stop(0%,#f2e530) color-stop(32%,#f2e530) color-stop(33%,#1ebf41), color-stop(66%,#1ebf41), color-stop(67%,#207dc9), color-stop(100%,#207dc9));

  background:-webkit-linear-gradient(top, #f2e530 0%,#f2e530 32%,#1ebf41 33%,#1ebf41 66%,#207dc9 67%,#207dc9 100%).

  background:-o-linear-gradient(top, #f2e530 0%,#f2e530 32%,#1ebf41 33%,#1ebf41 66%,#207dc9 67%,#207dc9 100%).

  background:-ms-linear-gradient(top, #f2e530 0%,#f2e530 32%,#1ebf41 33%,#1ebf41 66%,#207dc9 67%,#207dc9 100%).

  background: linear-gradient(to bottom, #f2e530 0%,#f2e530 32%,#1ebf41 33%,#1ebf41 66%,#207dc9 67%,#207dc9 100%).

  }

  NB. Not all browsers support degraded

  --

  Kenneth Kawamoto

  http://www.materiaprima.co.UK/

• Centro, when Im on the internet, no pictures will only show a small red and blue image

  I don't know what happened to my Centro. My son was playing with it (yes I know error #1) and when I had got it back I went to log on espn.com, and none of the pictures show only a small image with what looks like a sun bed on the blue waters with a red sky. I went to other sites (cnn, flickr and so on) but no pitures will appear. What could be the problem?

  Check your settings in Blazer.  Looks like you've changed 'Fast fashion' for the screens.

  Tap on the icon representing a lightning bolt at the top of the Blazer and see if it is set on fast Mode.  Change it to 'Normal '.

  Photos should load now.

  WyreNut

  Message relates to: Centro (AT & T)

• Win7 Ultimate Media Center Edition. Two channels ATSC displays only when I hit 'Record', otherwise 'channel not found', full strength 5 bar

  In the Seattle area, when I tune the channel 7.1 and 7.2 in the settings of signal strength, I still see 5 bars. It's the local affiliate CBS, KIRO.

  I have a HVR2250 dual tuner PCIe Hauppauge tuner card which has worked flawlessly for about a year. The drivers are current, 8851 dated June 2013. He also runs the current WinTV7 version 2. 8A. I do not use the Hauppauge app generally and it's not usually loaded with the exception of the tests. There is no shows at the request of record with WinTV7, although I could test records programmed successfully using this application.

  When I adjust the Guide, or by browsing the channels, MCE says no signal received 7.1 and 7.2.

  When I adjust everything first to one of them in the 10-15 seconds avant-erreur MCE 'no signal', if I reached the record, the channel is immediately blocked, including digital video and audio Dolby, and the program starts recording. I can stop recording, and as long as I don't change away from this channel, it remains fully functional with clear reception.

  I'm on a hill and have the correct line of the broadcasting antenna site about 12 miles away. I can also have this channel without problem on WinTV7 app by Hauppage, and setting my Samsung tuner screen, indicate both maximum resistance.

  The biggest problem is that the series on the logging sometimes channel show "available channel", and does not record successfully. If I manually start recording, it works every time.

  Is there any settings I can adjust to decrease the sensitivity required in MCE?

  Hi Scott,.

  According to the above mentioned the question on the Media Center, I have some suggestions for you so that you can go ahead and try see if this can help you.

  Method 1:

  Try the steps as indicated by "Cliffskier", who responded on 24 September 2012 in this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Centre-unable-to-to-watch-live-TV-but-can/3f093264-A811-4106-81d6-75e6434c1aad?page=2

  Method 2:

  Try us to update or download the list of guide for the media center. While we ensure that we have the list of guide updates and channels. After completing the above step, then try to search for and implemented.
  http://Windows.Microsoft.com/en-us/Windows7/use-the-guide-in-Windows-Media-Center

  For more information:
  http://Windows.Microsoft.com/en-us/Windows7/record-TV-in-Windows-Media-Center
  http://Windows.Microsoft.com/en-us/Windows7/watching-TV-in-Windows-Media-Center-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows7/TV-signals-that-are-supported-by-Windows-Media-Center

  Hope this solves the problem. If the problem persists, you can write back to us information and we will be happy to help you further.
  Thank you.

• I have an iMac (2015).  When I open Garageband, there are only two buttons on the control bar, play and stop.  No record button, rewind or ff.  Where are they and how can I make it appear?

  I have an iMac (2015). When I open Garageband, there are only two buttons on the control bar, play and stop. No record button, rewind or ff. Where are they and how can I make it appear?

  Try to enlarge the GarageBand window by dragging the corners of resizing.

  If she looks like this, your window is small:

  

  You can also try to click the double arrow at the end of the toolbar to reveal more options.

• in the messages, why are some text blocks green and other blue?

  In messages on el capitan text in messages is green, others in blue. Why?

  Green means it's a SMS text and blue is an iMessage.

• I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  If you are looking to get audio only from a YouTube video, all you need to do is read your video and while it's going to copy the link. Then on another tab, open listentoyoutube.com. Just follow the easy directions and paste the link.

  Hope that helps. I found out a month ago and I have 4 CD made from these audio files. There is a lot of fun to find obscure stuff and making CD of songs.

  Jon