Last logged Date and Points not updated profile

Similar Questions

• News of Apple shows yesterdays date and does not update.

  I use air ipad with ios (9.3.1) 1 last and had a message that "the food wasn't", so I closed the app then a few minutes later tried

  Yet once and the application works, but shows yesterdays date and new. I tried several times for several hours, but still not the same thing. The State of the system apple shows new as a green light. What the devil?

  All advice appreciated.

  Thank you

  Gary in Oregon

  Other apps like calendar have the right date?

  Try to restart the iPad

  Restart your iPhone, iPad or iPod touch - Apple Support

• How will I know that my bios is up to date and if not how can I update

  How will I know that my bios is up to date and if not how can I update

  For any questions about the Bios, contact the manufacturer of your computer if Vista was preinstalled, or the manufacturer of the motherboard if you have built your own system...

  BIOS issues outside of these Forums.

  See you soon. Mick Murphy - Microsoft partner

• Had to do a restoration complete my xp machine and will not update, in the past, system automatically updated with cartridges of siema etc service?

  Had to do a restoration complete my xp machine and will not update, in the past, system automatically updated with cartridges of siema etc service?

  What is happening, it is that it is so more the possibility of a user friendly hands on automatic update of Windows XP from a clean install.  Windows Update will NOT synchronize with and updated in the current order status to update a machine with a clean install of XP, but you separately download some patches and intermediate updates and apply them manually, to have a machine that connects a bit normally with Windows Update.

  Install the last update cumulative security for the version of Internet Explorer you have currently is essential, and you need to download separately and install it before going any further.

  http://support.Microsoft.com/kb/2888505

  Scroll to the information file for XP and Server 2003

  Download the file corresponding to your version of Internet Explorer and install first.

  It is also highly recommended that you install Firefox because IE8 is limited, probably compromised and sometimes useless and will crash on many sites, including Microsoft sites, including linked just above.

• My windows 7 hangs at startup and does not update microsoft isatap adapt #5.

  I use lenovo v570. Windows 7 just hangs up on start. IM using safe mode now. but when I check the drivers, the microsoft isatap #5 adapter has a yellow exclamation point and does not update. What should do? Help, please.

  Hello

  It's the Microsof Pnrtie on "Microsoft ISATAP adapter"

  "On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

  http://support.Microsoft.com/kb/932520

  See you soon.

• HP DV7-4050ea: Date & only time not updated DV7-4050ea

  I have a HP Pavillion DV7-4050ea. Whenever I restart the computer, the date time not not to date. I changed the battery (CR2032) without result. Is this what can I do to make sure of the correct date and time of updates every time I restart the computer.

  Hello

  Try to manually set the date/time of the bios again.

  You should see that the first field highlighted is the time value - set this to the correct time by using f5 and f6 (f5 will reduce the number & f6 it will increase).  When it is correct, press ENTER to highlight the Minute field and again, use f5 & f6 to set the correct minutes.

  When finished, press the arrow down to select the first Date field.  This should be for the month, so using f5 & f6 to enter the correct value.

  Press Enter to highlight the field day and this, and then press ENTER to highlight the year field and then set this.

  If you are happy with the settings of Date and time, press f10 and press ENTER to save the settings and exit the bios.

  Let windows load completely.  If the Date and time correct does not appear, go to the control panel and set the Date and time correct here.

  Restart computer and check if this has fixed the problem.

  Kind regards

  DP - K

• given the date and time not set when computer starts. also have a problem with typing

  by turning on my computer, sometimes it lights up at all, and then I try several times so that it lights up. When switching on the main screen, it says error due to the date and time not set and puts my computer starts in safe mode. When I am that I then have to set the date and time again. Why this keep happening?

  on my second question that I have is when I type an email or anything, my writing will just jump on another line and start typing in the middle of other sentences. Why is it jump around like that?

  You may have a failed in your motherboard CMOS battery.

  It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

  They cost about $5 to replace.

  http://www.computerhope.com/issues/ch000239.htm

  How to replace the CMOS battery in the above link info.

  See you soon.

  Mick Murphy - Microsoft partner

• Adobe cloud will not reinstall and will not update? How to reinstall without uninstalling the master suite?

  Adobe cloud will not reinstall and will not update? How to reinstall without uninstalling the master suite?

  Please refer to:

  • Download and install apps Cloud Creative
  • Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6
  • Download and install apps Cloud Creative
  • Re: Should uninstall us cloud creative cs6 before installing the cloud creative cc?

  Concerning

  Baudier

• The most effective way to log data and read simultaneously (DAQmx, PDM) high data rates

  Hello
   
  I want to acquire the data of several Modules cDAQ using several chassis to
  high data rates (100 k samples per second if possible). Let's say the measurement time is 10 minutes and we got a large number of channels (40 for example). The measured data is written to a PDM file. I guess, the memory or the HARD disk speed is the limits. For the user, there must be a possibility to view the selection of channels in a graph during the measurement.

  My question: what is the best and most effective way to save and read data at the same time?

  First of all, I use an architecture of producer-consumer and I don't want to write and display the data in the same loop. I expect two possibilities:

  [1] to use the 'DAQmx configure logging.vi' with the operation 'journal and read' to write the data to a PDM file. To display the data in a second loop, I would create a DVR samples documented and 'sent' the DVR for the second loop, where the data will be displayed in a graph (data value reference). This method has the disadvantage that the data of all channels is copied into memory. Correct me if I'm wrong.

  [2] use 'DAQmx configure logging.vi', but only with the "journal" operation to write the data to a PDM file. To view the selected data, I had read a number of samples of the TDMS file in the second loop (I'm currently writing the TDMS file). In this case, I have only one copy data from the selected channels (not), but there will be more HARD drive accesses necessary.

  What is the most effective and efficient solution in this case?

  Are there ways to connect and read data with high frequencies of sampling?

  Thank you for your help.

  You say that the measurement time is 10 minutes. If you have 40 channels and you enjoy all CHs at 100 kHz, it is quite a number of values.

  In this case, I always try to approach under the conditions of use. If a measure is only 10 minutes, I just connect all PDM data and create a graphic module that could be in the same loop of consumers where connect you the data. You can always work on the raw data files big offline afterwards, the extraction of all the information you need (have a look at the product called NI DIAdem: http://www.ni.com/diadem/)

  The main issue is that the user needs to see in the graph (or perhaps a chart can be useful too). Lets say that the graph is 1024 pixels wide. It makes no sense to show multiple data to 1024 points, Yes? Every second will produce you 100 data points k per channel. What is the useful information, which should see your username? It depends on the application. In similar cases, I usually use some kind of data reduction method: I use a moving average (Point by point Mean.VI for example) with a size of the interval of 100. This way you get 100 data points of 1000 per channel every second. If you feed your graph every second with these average values, it will be able to data points in 1024 of the store (as a default) by channel (curve), which is a little more than 10 minutes, so that the user will see the entire measurement.

  So it depends on the frequency at which you send data to the consumer. For example, collect you values 1024 by iteration of the producer and send it to the consumer. Here you can make a normal means calc or a bearing (according to your needs) and he draw a graphic. This way your chart will display only the values of the last 10 seconds...

  Once I programmed some kind of module where I use a chart and not a graph, and the user can specify the interval of the absolute timestamp that is traced. If the data size is larger than the size of the chart in pixels, the module performs an average calculation in order to reduce the number of data points. Of course, if you need to see the raw data, you can specify an interval that is small. It all depends on how you program zoom functions, etc... In my case I hade a rate of 1 Hz, so I just kept all data in RAM limiting the berries to keep 24 hours of data, so that technicians could monitor the system. In your case, given the enormous amount of data, only a file read/write approach can work, if you really need access to all of the RAW data on the fly. But I hope that the values of working capital means will be enough?

• Windows update and does not update Security Essentials

  Minimum information to validate:
  Version of Windows and Service pack level. (Windows XP Home Edition, SP3; Vista Home Premium, SP1; Windows 7 Ultimate, etc...)
  Post also if you use 32-bit or the 64 bit version of Windows.

  32-bit of WINDOWS XP Service pack 3

  Update the number of the last update installed before any problem.  If you do not know the number of update, then give the date that the update has been installed.  The number of updates update failed.

  Last scan 06/06/10 at 552 am.

  Error code updates failed or if you think an update caused a blue screen, give the blue screen error codes.

  No blue screen or error code

  Other information to validate:
  Measures already taken to correct the problem and the results of the measures.
  many of these forums checked.  Ran malwarebytes.

  If the question is never happened before with other updates.
  Never happened before

  A few other useful parts are:
  What program antivirus you use, if it is up-to-date, and there has never been any other installed antivirus program.
  If your version of Windows has been upgraded from a previous version or if it came with (or clean installed with) the version you are currently using.

  MSE.

  I fear that the computer has already been infected by the time wherever you got installed MSE, Jim. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  NB: If it was repairable, the KB971058 difficulty he could do.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care ofeverything on the next page before connecting the machine to the internetor a local network (i.e. other computers) and before using a USB or SD card that is not brand new, or has not been freshly formattedotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: The free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the Norton Removal Tool to new front to install updates, Windows Service Packs or IE upgrades and before installing MSE again (which will require WinXP SP3 must be installed).

  If you need help, please start a new thread in this forum:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads

  Wish I had better news for you. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Podcast stream and coverage not updated

  Hello!

  My podcast stopped to update and even though I have a new episode on Podomatic where I host my podcasts it seems not show on the itunes store. Identical to the cover of podcast. I anime cover on a separate image hosting site http://s19.postimg.org/r4ruby1lf/mrofeed1400.jpg

  I have validated both the original feed on http://orestese.podomatic.com/rss2.xml and the feedFeedBurner feed on http://feeds.feedburner.com/MroPresents (it's the food that I've linked to itunes) and they both seem to be ok. I tried resynchronization of power but still nothing.

  Can you please help me solve this problem?

  Thank you very much!

  Despite the title, your image is 1280 x 1280 px, less than the minimum acceptable size of 1400 x 1400 px and so no update. When you have corrected this, you must specify the image a different file of the original name or the store will have no way of knowing that it's been updated. It may take a few days for a new image appear in the store.

  Your last episode was published about two days ago isn't that unusual that the store has not yet updated. It must do so in the next: if it does not go to Connect of Podcasts, connect you, choose your podcast and click on "Refresh Feed '. Give it time - the store can take a day or two to update. If that doesn't work, contact support and ask for a re-indexing: who can solve it. Go to https://itunespartner.apple.com/en/podcasts/overview and click on the link "Contact us" at the bottom of the page.

• I cannot view youtube videos, but I can see it in chrome and ie and does not update flash

  I cannot view youtube videos, but I can see it in chrome and ie and flash will not be updated or the other I always click Update now and download it and it says conplète to update but then I check the plugin updates and always says the flash needs to be updated. I run firefox in safe mode and I still can't view videos and I tried reading the forums and makes suggestions like clear cookies and such, but not luck. Another thing is that I get a weird screen when I try to play videos

  http://DL.dropbox.com/u/76233373/YouTube.jpg

  This is a picture of the screen I get
  help would be appreciated because I've had this problem for awhile now

  There are some compatibility issues between the last Flash drive and a few Add-ons Firefox or settings. Could see you if anything in this article helps you: 11.3 Flash does not load video in Firefox.

  You can also consider turning off new protected in Flash 11.3 mode, since this feature is currently being debugged. See this article from Adobe support under the heading of 'Last resort': Adobe Forums: how to fix protected Flash Player for Firefox mode?

  About the update, which the Adobe gives you usually is just a small installer program that you run that downloads the actual plugin. I recommend having closed all Firefox by doing the updates to Adobe so that none of the files are ignored in the process.

  At least one user has noticed a problem where Adobe installed two versions of Flash-by-side; the other oldest had to be removed manually. See the flash works fine in firefox 14 but I can not update.

• Display of blackBerry Smartphones 'sent' date and time, not "received".

  The problem:

  When I got my BB 8830 leave for some time (for example during a flight) or been out of coverage, messages accumulate on the server. When I log back, it retrieves all the (I'm mostly concerned about e-mail via BIS) and they all have the date & time that my BlackBerry has come online. In addition, the chronological order is not preserved, (esp. with multiple e-mail accounts). This makes it very difficult to scan my Inbox and understand what I missed and when. It is ridiculous to have 20 messages all with exactly the same date and time.

  The Question:

  Can I have my inbox show is the "sent" date and time or (even better) the data and time, were received by my mail server? Would it not different with BES?

  Thanks in advance,

  Ian

  It only shows the date and time when the message received on the device, this is normal. You can check that your messages the individual icons for your BIS BIS accounts e-mail.

• Date field will not update

  Apex using pre-packaged "Group calendar" app I work on page 10. I updated the form to include a custom date field and added all the code to the EBA_ca_api package

  My problem is that my custom date field will not retain the value on the edition of an event. I have other custom fields that are not date fields (field numbers and text) that update without any problem...

  How can I update my date fields?

  Update:

  I am sure that the issue is somewhere in the package, the values are not updated for some reason any.

  The pre-existing app code uses this statement

  If to_char()c1.event_date_time,' DD-MON-RRRR HH:MIam ') ! = TO_CHAR ()p_event_date_time ' DD-MON-RRRR HH:MIam '( ) then

  Update EBA_ca_events

  set event_date_time = p_event_date_time

            where event_id = p_event_id ;

        end if ;

  
  

  and it works for this field when updating. I tried to use this code on my custom date field and it didn't work, so now I'm looking for something like this

  if TO_CHAR (nvl(c1.event_due_date,'0')) ! = TO_CHAR (nvl(p_event_due_date,'0')) then

  Update EBA_ca_events

  set event_due_date = p_event_due_date

             where event_id = p_event_id ;

  end if ;  -Copy the following code causes an error when you try to apply changes (not a month valid)

  
  

  Because the following code works and updates to my date no fields

  
  

  If nvl(c1.event_not1,'0')! = nvl(p_event_not1,'0') then

  Update EBA_ca_events

  Set event_not1 = p_event_not1

  where event_id = p_event_id;

  end if;

  Does the code work if I'm on the right track? -At the end of the day what I'm trying to do, it is to be able to add a date field for the application of group calendar pre-packaged on the creation form and event on page 10, and then later change this event and updated it to the database.

  
  

  Richie V wrote:

  No I did not, but do you know how to fix the error happen and allow the new field custom_date to be edited and saved in the database?

  Thereafter. The missing pieces of the puzzle were the type of the values concerned was TIMESTAMP WITH LOCAL TIMEZONE, and that type conversion had already been made in the process of page APEX. Therefore, the required code in the package:

  -- custom date code
  
  if nvl(to_char(c1.custom_date,'DD-MON-RRRR HH:MIam') , 'X')!= nvl(to_char(p_custom_date,'DD-MON-RRRR HH:MIam'), 'X')
  then
      update EBA_ca_events
      set custom_date = p_custom_date
      where event_id = p_event_id;
  end if;
  

• Pages and Keynote not updated every day their iOS may 10

  I manually chose to update Pages and Keynote in the iOS App Store on my iPhone. Now, (1) the icons are grayed out, (2) the apps does not open (3) apps will not delete and (4) applications are still needing to be updated... sort of (the shows the App Store Pages and Keynotes under "Updates on hold", but he seems to think that the updates have completed because it shows "Open" next to every app-screenshots below). I am running the latest version of iOS.

  What can I do to get apps working again?

  

  XSer,

  Follow the steps listed in: restart your iPhone, iPad or iPod touch - Apple Support