last update received Recon event

Similar Questions

• Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.

  Original title: updates

  Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.  Although I tried to reset nothing help.

  Have also tried to download Windows 10 but computer spends all day looking for updates, but nothing happens.

  As its been almost a year that it is updated, you may be better off to backup your data and backup of your entire system, so you can get back to this point at least if something goes wrong. Then:

  Update your anti-virus software and run a full scan. Then download, install, update and run a full scan with Malwarebytesfree. Keep it free, no need to start a trial etc. Malware can be a cause of failure of the updates, the scan won't take long to run and should report something nasty, if its there.

  Then you can try the following:

  1 convenience store update Windows - http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter

  2 system update readiness tool - http://windows.microsoft.com/en-us/windows7/what-is-the-system-update-readiness-tool

  3 components of reset update - https://support.microsoft.com/en-us/kb/971058

  4. check that "Windows update service" and "Background Intelligent Transfer Service" are listed and running according to the details in this article - https://support.microsoft.com/en-us/kb/2730071 "

  If the above does not help, consider trying a 'repair installation system' - http://www.sevenforums.com/tutorials/3413-repair-install.html if you have windows installation discs, or a 'factory reset' (updated) If your PC came with no windows disk and was preinstalled. NOTE - in case backup your data and your system first in the form of data may be lost if something goes wrong, and data will be lost in the case of a factory reset.

  If you do not want to reinstall again, post back with more details, that is at least what is the error code when the updates fail? (find an update failed in "view history update", right click and click details.) Check a bit to see if the same error code. ). Then someone else can we hope to help more.

• Since the last update to FF, I can't log out of Yahoo and when I close FF it tells me it crashed.

  Since the last update to FF, I can't log out of Yahoo and when I close FF it tells me it crashed.
  When I try logging out of Yahoo, it comes up with:
  The secure connection failed

  An error occurred during a connection to login.yahoo.com. You have received an invalid certificate. Please contact the server administrator or email correspondent and give them the following information: your certificate contains the same serial number for another certificate issued by the certification authority. Please get a new certificate containing a unique serial number. (Error code: sec_error_reused_issuer_and_serial)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the web site owners to inform them of this problem.
  

  I have run CCleaner and erased cookies. Uninstalled and reinstalled FF to no availe.

  When I close FF one box comes telling me it crashed.

  I can log out of Yahoo in Internet Explorer.

  the advantage of this feature to scan https is at least questionable. in order to make it work, avast has sort of a man-in-the-middle 'attack' in order to access the contents of the encrypted connection (firefox supports a feature called pinning of key which can be used by Web sites to address these MITM attacks and who also seems to pick up interference from AVAST).
  When you download files via a https connection, they will be analysed by the AV software once they land on your hard drive in any case. However, it should be the job of the Navigator to make it impossible to get infected by malicious software trying to surf around...

  Edit: Please try to restart the browser once again, it may take a new session for the change to take effect.

• Mac freezes or crashes with the last update of El Capitan

  I have an old iMac (mid 2007), Mac, but I have never had any problems with it until this last update of OS lock (Version OS X El Capitan 10.11.4, although I have returned to an earlier version recently to prevent locking without result).  I have 4 GB memory 667 MHz DDR2 SDRAM, 2.4 GHz Intel Core 2 Duo CPU graphics ATI Radeon HD 2600 Pro 256 MB.  Usually, I use Safari when this happens. It requires a restart of the hard to get it working again. I also have the Machine backup time, which I returned to an earlier version of the operating system at some point.  In general, the cursor still moves, but does not work no matter what windows or controls, that is why it requires the hard reboot.  The Mac reputation is on the line, since I told my friends of Windows that Mac will last at least a decade before they may need to be replaced, while Windows based computers need replacing every 5 years.  Is that what I can do perfectly well apart from the replacement of this computer?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Your last update won't let me connect on Yahoo Messenger. No problem with IE. How can I fix it? I don't like the updates that are causing problems. If it isn't broken don't fix it

  I am unable to use Yahoo Messenger when connected to Firefox. Mail works but not the Messenger. I received notice of message, but when I try to open the message and answer, nothing happens. Or to start a conversation. I tried to use IE and all Yahoo services work fine, so the problem is with your last update. I want to reinstall the previous version. You should not automatically updated versions if problems of this kind will happen. Please respond with a fix.

  A light 'work around' If you know what the contact to discuss with you...

  Keep a tab of discussion open for them. If there is already a tab open, chat works very well.

  When you click on their name, two tabs will appear - one showing a constant loading "dial". Close that one. Then just keep the other open tab.

  I know it's not practical if you have many contacts who chat with you, but if you have just a couple, it's at least a possibility to discuss with them by E-mail.

• After the last update can not burn DVDs

  Current enforcement 10.11.4 on Imac I5, end 2013 with external dvd player from Sony. Always had trouble make him start to burn but now can't burn DVDs at all. Get connection errors, low connection errors and even several icons on desktop DVD. 14 with good quality dvd using toast. USB is connected to the directly to the mac. ResetPRAM, transported to various ports usb. Sometimes dvd will go up but not available or when you are ready to burn receive error messages. Before last update worked most of the time. Such a simple tsk, which has always been a test since the disc removed.

  Try reinstalling the toasts with the connected reader.

  If this does not work, try resetting the SMC: reset the management system (SCM) controller on your Mac - Apple Support

• Flash 10.3 was last updated June 2011

  Just received the last update of flash, but its telling me that to get the benefit of the hineycomb all users should detected 3.1, can someone bridge me in the direction of the download please? I paid a lot of money for this tablet and waited for flash and other features to work, but they seem to rely on a great patch operating system.

  Thank you

  None.

• iMessage works only with cellular data, only in wifi since the last update

  I did a few days ago was last updated (iOS 9.2) and since then I can only send and receive text messages to cellular data no iMessages, I have friends with iPhones that messages are only of text messages sent and received as, even if we have all two iPhones! I get this message when you try to activate iMessage "enable mobile data or use the wifi to configure iMessage.

  I turned on wifi and it accepts the iMessage parameter, but once I go back to the cell data, it shuts down my ability to send iMessages! I'm on a plane, so no credit, turned the phone on and off, have three bars of service (Telstra in Australia)... help anyone? !

  AAnd I tried all the steps on the page provided by Apple iMessage is not available when I try to turn it on?

• ENVY 17 t: last update of HP has hosed my laptop

  Hello

  I recently installed several updates from the HP Support Assistant and unfortunately, I can't use some of my applications.  Specifically, I tried to use MODO 902 sp1 (it's the Foundry 3D modeling software) and after double-clicking on the icon my computer freezes and then crashes.  No BSOD, but it just won't load, the interface of Windows becomes useless, except for my mouse I can still move around.  I tried to reinstall the software and even tried a downgrade to an earlier version (MODO 901 sp1) but with the same result.  I tested to see if Pixologic ZBrush 4R7 sp3 works and it loads fine, so I don't know what is happening.  I should note that MODO was working fine before this last update of HP, but I suspect that something got REALLY fubared during installation.

  In any case, I can tell you what updates have been installed in the event log:

  Updated HP Notebook System BIOS (Intel processors)

  Driver and Intel Chipset Installation utility

  Intel Extensions (SGX) device driver software keeps

  Driver Bluetooth Intel for Microsoft Windows 10

  Driver Audio Realtek High-definition (HD)

  Sensor of fingerprint reader fingerprint validity

  Power Media Player

  My specific machine is a HP ENVY 17 t-n100, number of product L8X51AV

  One last thing, when I try to use the HP Web site to identify my machine, it keeps giving me a message to try again, saying that it is not plugged in (which is absurd because it has just detected what kind of HP product that I use).

  Is there a chance that I could somehow push these updates?  The only other possibility I can think of is an update of Windows 10 screwed something since I saw the last time it checked for something again was last night around 11: 30ish or more.

  Thank you for your quick response.

  PS - It's the second question in less than two months since I got this laptop.  The first had to deal with a faulty motherboard which was replaced.  I never had such problems with HP products before (this is my 3rd laptop from them), that I explain why I am surprised by the amount of problems I'm having now.

  Release a little busy last week, but I would like to report this incident as having been resolved.  For some reason, I need to detach my two monitors to my laptop and reset the connection.  I only found it by chance that I had brought my laptop to work to show one of my colleagues the questions I had.  However, everything loaded up and there is no frost.  When I got home, I reconnected my monitors and everything works fine since.  Can't believe, it turns out to be something so trivial, but I guess it was the only way to get the display output working properly again.

• Last update causing problems, it seems

  Since the last update my computer is almost unusable.  I have no access to my add/remove program to remove and not restore mode without failure or make access a system.  How can I get these updates on my pc!

  Hi Jofchicago,

  Thank you for visiting Forums answers to Microsoft Windows.

  What are the updates that you installed before that this problem occurred?

  If you have the number of the update, I suggest you to use spuninst folder of Ko and launch the spuninst.exe file to uninstall the update.

  I have some steps that may help you.

  Method 1

  Try to restart the computer in safe mode and check if works very well.

  To do this, follow the steps below:

  1 restart your computer if it is running.

  2. tap on the F8 key after your initially on powers computer.

  3. Once you see the menu Advanced Boot Options, you can stop tapping.

  4. use the up/down arrow keys to highlight your selection.

  5. Select Mode safe mode with networking and press ENTER.

  6. you should see loading drivers and wait please.

  7. you should then be at the Welcome screen.

  8. connect to your computer using an account with administrator privileges.

  For more information, see this link:

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2

  If it works fine, perform a clean boot. Clean boot starts the operating system by using a minimal set of drivers and startup programs. A clean boot helps eliminate software conflicts.

  To manually start Windows XP with a clean boot, follow these steps:

  Step 1:

  Start the System Configuration utility

  Click Start and run, type msconfig, and then click OK.

  The System Configuration Utility dialog box appears.

  Step 2:

  Configure selective startup options

  In the System Configuration Utility dialog box, click the general tab, and then click Selective startup.

  Click to clear the process SYSTEM. INI file check box.

  Click to clear the process GAIN. INI file check box.

  Click to uncheck the box load startup items. Check that load System Services and use Original BOOT. INI are checked.

  Click the Services tab.

  Click to select the hide all Microsoft Services check box.

  Click Disable all, and then click OK.

  When you are prompted, click on restart to restart the computer.

  Step 3:

  Log on to Windows

  If you are prompted, log Windows.

  When you receive the following message appears, click to select the don't show this message or launch the System Configuration utility when Windows start check box, and then click OK.

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  1. click on start and then click Run.
  2. type msconfig and click OK.
  3. the System Configuration Utility dialog box appears.
  4. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  5. When you are prompted, click on restart to restart the computer.

  For more information, see this link:
  http://support.Microsoft.com/kb/310353

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't update MS windows, IE & Office files. The error code I get is 80246008. Last update successful prior has been KB2636927 may 18. I use Norton 360.

  I am running Windows XP Pro SP3 32-bit.  The latest updates that do not include KB2685939 and 11 other people.  I received the error code 80246008.  Last update successful prior has been KB2636927 may 18.  I am also running Norton 360 and Advanced System Optimizer (by Systweak).

  Hi John,.

  I suggest you to follow the steps and check if it helps.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.

  I hope this helps.

• last updated "probably infected with a variant of the Trojan Win32/Genetik horse '...

  NOD32 has said that the last update is "probably infected with a variant of the Trojan Win32/Genetik horse":

  Sansa Updater (new) - 1211-12/02/2009-574, 3 KB

  Any ideas if this been considered?

  Motty

  Just received the following ESET:

  ---
  Dear motty,

  We received your email without the accessory, however the file I found will be detected in the next update.

  Kind regards

  ESET spol. s r.o.
  ---

  It was a very fast response from Eset, they certainly are a great company and NOD32 is an impressive AV, recommend it!

  Motty

• Cannot run my SLI after Windows was last updated.

  The last update of Windows vista killed my PC. With hindsight were not up to date my graphics card drivers. I got today partially of the situation. (short version of events), but my PC will work is SLI without freezing. The PC works only through card a chart. I have two Nvidia GeForce 9800GT and running the latest driver pack, (332.21). Windows Vista Home premium is entirely up to date.

  Any tips or tricks to get my game back would be greatly appreciated?

  Hello

  Click on the link provided below for more information about SLI (NVIDIA cards):

  http://www.GeForce.com/hardware/technology/SLI/FAQ#S11

• last update was on Jan. 10, when I check for updates it says no to this day are available

  Original title : last date was jan 10 th, when I check for up date it saids not far are avabile, why?

  my last day was Jan 10, when I try to update its saids don't place avabile DATS why?

  Hello dustymydog,

  Microsoft update usually on a monthly basis. If you tried to update and it says that no update is available then there re no insertion updates due for delivery.

  Updates are delivered on update Tuesday of each month.

  Either by the way, my last update of Windows for Vista was on 17 January. It's KB2585542. The only other updates I have received have beenfor Microsoft Security Essential.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Cannot open the e-mail since the last update on 09/11/11

  This update came just after the new features added to the email. I wonder is there a compatibility issue? The last update was a security update. Is it blocks something perhaps?

  Hello

   

  1. what email program are you using?

  2. you receive an error message when the issue occurs?

  3. you are not able to open all e-mail?

  4. What is the number of KB update?

  Check the following link to see the updates have been installed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Answer us with more information so that we can better help you.

  Thank you.