Last updated a bust of El Capitan

Similar Questions

• Last updated: El Capitan made Nvidia drivers not compatible

  I have the 346.03.15f02 latest drivers Nvidia Web installed and everything was going along great last El Capitan 10.11.6 running.

  Last updated 09/01/2016 security has been applied with success and after seeing a few graphical anomalies during the boot sequence made me know something was wrong, I saw a message saying that OS X uses OS X default drivers.

  I went into the preferences of the Manager of Nvidia drivers and Nvidia is now incompatible.

  Is it possible to do this backward? I just created this model, so I did not set up, still time Machine...

  Sorry, but do not treat us non-Apple drivers. Ask Nvidia or look for a pilot updated on their website. OS X contains all the relevant drivers for all GPU compatible, Apple supports.

• Since the last update with el capitan, imac won't stop with the stop button in the Apple menu

  Since the last update in el capitan my imac and my macbookair will not stop or recover on the regular basis. I have to press the power button to stop the hard wayanybody a response?

  If your Mac is not turned off, press and hold the power button for 5 seconds to force a shutdown. Read more in this article OS X El Capitan: disconnect you, sleep, restart, and stop down

• Mac freezes or crashes with the last update of El Capitan

  I have an old iMac (mid 2007), Mac, but I have never had any problems with it until this last update of OS lock (Version OS X El Capitan 10.11.4, although I have returned to an earlier version recently to prevent locking without result).  I have 4 GB memory 667 MHz DDR2 SDRAM, 2.4 GHz Intel Core 2 Duo CPU graphics ATI Radeon HD 2600 Pro 256 MB.  Usually, I use Safari when this happens. It requires a restart of the hard to get it working again. I also have the Machine backup time, which I returned to an earlier version of the operating system at some point.  In general, the cursor still moves, but does not work no matter what windows or controls, that is why it requires the hard reboot.  The Mac reputation is on the line, since I told my friends of Windows that Mac will last at least a decade before they may need to be replaced, while Windows based computers need replacing every 5 years.  Is that what I can do perfectly well apart from the replacement of this computer?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care

• LAST UPDATE FOR EL CAPITAN CANNOT SETTLE DOWN, THE COMPUTER RESTARTS.

  problem 1: I can NOT INSTALL THE LAST UPDATE OF "EL CAPITAN." THE COMPUTER RESTARTS NOT SPONTANEOUSLY OR FORCED.

  BESIDES, MY "FINDER" DOES NOT WORK, NOT TO NOT DISPLAY.

  problem 2: I can NOT INSTALL THE ICLOUD PREMIUM from AMAZON.COM FOR the PHOTOS IN MY MACBOOK PRO.

  problem 3: I want to recover the space in my MacBook Pro by removing ACCESS 'PARALLEL' IF I PUT THE WINDOWS XP AND WINDOWS 7.

  PROBLEM 4: I WANT TO 'CLEAN UP' MY MACBOOK PRO TO RECOVER THE SPACE. I USED TO HAVE 'MACKEEPER' BUT I AM TIRED OF PAYING FOR UPGRADES.

  PROBLEM 5: WHAT IS THE WAY OF EASIIEST TO SEN IMAGES TO THE ICLOUD. I NOTICED THAT TAKES TOO MUCH TIME AND I CAN NOT CHOOSE "ALL PHOTOS" TO BE SENT TO THE ICLOUD SO I CAN DELETE THEM THE PHONE AND THE MACBOOK PRO. "

  THANKS FOR ANY HELP.

  PEDRO

  AKA Dr.Hdz

  Answer 1: Try to restart the computer by pressing command + R. This should start the mac in recovery mode and will allow you to reinstall OS X (don't worry it'll only reinstall the operating system, your files will not be deleted)

  Answer 2: Can elaborate you more on what is the iCloud premium Amazon.com for photos? I've never heard of this, what error do you get?

  Answer 3: Open Bootcamp Wizard and choose the option "Remove Windows 7/XP"

  Answer 4: Mackeeper is ransomware. AKA. a scam, don't pay for it. You can use tools such as OmniDiskSweeper, which is free and shows you what are the elements take place on your mac so that you can delete what you don't want.

  Answer 5: If you have iCloud library activated under iCloud, then your images will be automatically uploaded to iCloud and equipment associated with your Apple ID.

  I would like to know if this helped you / resolved questions. Thank you!

• I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

  I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

  Hi Yanni,

  Tethered shooting works fine with Lightroom 6.4 on El Capitan.

  You can then go ahead and buy Lightroom and perform the tethered shooting.

  Kind regards

  Tanuj

• my habit of portable full process of start-up ever since I made the last update to El Capitan, gets hung up on where the Office should appear.  Behavior strange screen turns off then flashes every 8 seconds or so still visible status bar

  When this happens, you can also see a white spinning dial when the screen is flashing.  But the Bureau just never came up.  Tried the disk first aid in safemode, LANDAU of compensation running.  Now I can't even on it to open it in safe mode.   I also tried to install a new copy of El Capitan in safemode, but she got too successful for the download.   I have a macbook pro mid-2012 can't remember the speed of the processor, 16 MB of RAM.

  I suggest the following:

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry in the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.
  6. Download and install the update of OS X El Capitan 10.11.6 Combo

• last updated 10.10.5

  Hi all

  I'm a bit confused! (Not hard)

  I ran the last update and on my on this drop-down list box mac I tells me I am running version 10.10.5 yet, according to the list of updates installed on September 14, I have version 12.5.1

  When I tried to download an app on the App store it says I can't because I need OS X 10 11 or later version.

  So my logo Apple drop-down box says that my version is 10.10.5

  my list of updates in the last 30 days, say the of it downloaded 12.5.1

  Which one should I?

  Thank you

  Tricia

  The second update is an iTunes update, not an update to OS X. The latest version of Mac OS X's El Capitan, which you can download from App Store.

• My iMac will not close since the last update

  Since the last update for El Capitan, my iMac does not stop and I hold the power button so he can close. Has anyone else had this problem? I'm nervous to download the update on my Macbook pro in case the same thing happens. Also has anyone had a solution.

  Uninstalling the Wacom software.

• Cannot open disk sparsebundle since the last update image

  Since the last update of El Capitan (10.11.5) I can not open a disk sparsebundle image. A message says "incompatible type with the socket protocol. Does anyone have an idea to access my data on this disk image?

  Thank you

  Does anyone have an idea?

  I try to mount a drive another image and it failed for the same reason...

• After the last update any pages files won't open

  After the last update, I can't get pages to answer, and it will not be open to all the old files.  Help please!

  What specific version of Pages do you use on El Capitan. You need to know that before I can answer.

• Problems installing Lightroom 6 last update

  Hello!

  I have a MacBook for 2009 with IOS El Capitan.  Lr6 was working perfectly until I was invited to perform the last update of the application.  After the first attempt to download the update, I got a U44M1P7 error.  I went through the forum and made the suggested solutions/actions, including uninstalling the app and desktop creative cloud application manager that I did.  Now, when I try to re - install the Lr app I get the following:

  Exit code: 7Please see specific errors below for troubleshooting. For example, ERROR: DF015... - Summary - 0 fatal Error (s), 1 Error (s) - payload: Adobe Lightroom 6.0.0.0 {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}---ERREUR: DF015: cannot delete the symlink "/ Applications/Adobe Lightroom/Adobe Lightroom.app/Contents/Helpers/DynamicLinkMediaServer/application/dynamiclinkmediaserver.» App/Contents/Adobe QT32 Server.app/Contents/Frameworks "(Seq 3676)-

  Any suggestions on how to proceed?  Thank you!

  Aude:

  Nothing has worked.  I solved the problem in uninstalling/reinstalling all new creative cloudless.  Currently, LR6 works very well and I was able to complete all updates.  Again, thank you for your time.

  Kind regards

  Luis

• last updated

  the last update took away my ability to edit, trash all mails at once. I get every day about 1000 spam emails and it will still remove them one by one.  What is the solution? Thank you.

  It seems that you remove these form email your junk e-mail folder, but rather you inbox. I never remember there being a way to delete all messages in a mailbox other than to junk, trash, etc, then I suggest you connect to a Mac computer, then select the first spam, then press SHIFT while clicking the last email you want to delete. He would choose each of them and you can press command-DELETE.

• Since the last update, I can not choose the music I bought for the first download on my phone

  Since my last update, I can not get music on my phone, re upload it, music that I bought in the past

  Hello victoriafromrodeheath,

  I understand you have updated your iPhone 6s more iOS 10.0.2, but you can not access your purchased music. The first thing I would say is to leave the music app, sign out of the iTunes (from the settings app) account and restart your iPhone.  Then try to access your purchased again music.   Here are a few resources to explain this in more detail:

  Force a nearby application on your iPhone, iPad or iPod touch

  Open one session with another Apple ID on your iPhone, iPad or iPod touch

  iTunes, App Store and iBooks

  1. Tap Settings > iTunes and App Store.
  2. Tap on your Apple ID. If you see the Sign In option, you can change your Apple ID now.
  3. Click sign out.

     

  4. Go to settings > iTunes and App Store.
  5. Press Sign In, and then enter your Apple ID and password.

     

  Download your latest purchases
  
  

  Download a song

  You can redownload the songs on your iPhone or iPod touch, the iPad, Mac or PC. You can listen to the song already purchased on your Apple TV, but they download on your device.

  On an iPhone or iPod touch

  1. Open the iTunes Store app.
  2. At the bottom of the screen, tap more > buy > music.
  3. Press "not on this iPhone" or "not the iPod."
  4. Find the song you want to download, and then type it.
  5. Press the download icon to the right of the title. Your song downloads on your device.

     

  If you can't download or do not see your last purchase, get help.

  Take care.