Launch a process from space webcenter

Hello

I am a newbie in SOA, I'm just trying to create a workflow to request time off with SOA suite, which as a result of the steps
1. request for employee portal
2. approval of the Manager
3. inform the employee.

To do this, I created a SOA project in Jdeveloper and deployed in SOA suite.
My problem is: How can I start this workflow of the webcenter space?
What are the methods to start the SOA process from space webcenter?



Concerning
Hamani

each 'process' is exposed by default through a service, with binding.ws (which is a Web service port). After the deployment of the composite, this service can be called via SOAP/http

Tags: Fusion Middleware

Similar Questions

  • Integrating problem of process BPM with Webcenter spaces spaces PS5

    Nice day!

    I currently installed a fresh version of Webcenter 11.1.1.6 stack in a single domain that contains:
    1.) UCM
    2.) spaces
    3.) SOA with BPM

    After you set up the process-portal - install.properties, I ran ordering install.xml - f ant that will integrate the process spaces Webcenter sucked.

    The problem now, I faced is that, after seeing process areas link in Webcenter spaces, I'm also redirected to internal problem and seeing the newspapers, I have something like:

    [2012 06-11 T 16: 28:43.918 - 07:00] [WC_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: weblogic] [ecid: 81caeefafba8cb1a :-15b44550:137ddb9ada0:-8000-000000000000022e, 0] [APP: webcenter #11.1.1.4.0] []
    oracle.adf.controller.ControllerException: ADFC-06002: unhandled exception
    at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:208)
    at oracle.adfinternal.controller.engine.ControlFlowEngine.handleException(ControlFlowEngine.java:640)
    at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:235)
    at oracle.adfinternal.controller.state.ChildViewPortContextImpl.invokeTaskFlow(ChildViewPortContextImpl.java:104)
    at oracle.adfinternal.controller.state.ControllerState.createChildViewPort(ControllerState.java:1387)
    at oracle.adfinternal.controller.ControllerContextImpl.createChildViewPort(ControllerContextImpl.java:78)
    at oracle.adf.controller.internal.binding.DCTaskFlowBinding.createRegionViewPortContext(DCTaskFlowBinding.java:474)
    at oracle.adf.controller.internal.binding.DCTaskFlowBinding.getViewPort(DCTaskFlowBinding.java:392)
    at oracle.adf.controller.internal.binding.TaskFlowRegionModel.doProcessBeginRegion(TaskFlowRegionModel.java:164)
    at oracle.adf.controller.internal.binding.TaskFlowRegionModel.processBeginRegion(TaskFlowRegionModel.java:112)
    at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:241)
    at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
    at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3204)
    at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)
    at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:115)
    at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareModel(FacesPageLifecycle.java:359)
    Caused by: oracle.adf.controller.ControllerException: ADFC-02001: could not find the controller of the ADF ' / WEB - INF / processApplicationsTaskflow.xml'.
    at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.getMetadataObjects(MdsMetadataResourceProvider.java:473)
    at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.loadUnmutalbeMetadataResources(MdsMetadataResourceProvider.java:372)
    at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.getResources(MdsMetadataResourceProvider.java:183)
    at oracle.adf.controller.internal.metadata.MetadataService.getTaskFlowDefinition (MetadataService.java:239)
    at oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.findTaskFlowDefinition(TaskFlowCallActivityLogic.java:1072)
    at oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.invokeTaskFlow(TaskFlowCallActivityLogic.java:224)
    at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:217)
    ... more than 92
    Caused by: oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata not found for the metadata object '/WEB-INF/processApplicationsTaskflow.xml '.
    at oracle.mds.core.MetadataObject.getBaseMO(MetadataObject.java:1331)
    at oracle.mds.core.MDSSession.getBaseMO(MDSSession.java:3200)
    at oracle.mds.core.MDSSession.getMetadataObject(MDSSession.java:1190)
    at oracle.mds.core.MOResolver.getMetadataObjects(MOResolver.java:218)
    at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.getMetadataObjects(MdsMetadataResourceProvider.java:421)
    ... more than 98

    I would like to ask if there is a support link or a solution to this problem I am facing as I may be able to see the BPM process spaces in Webcenter spaces.

    Hi Jeff,

    His search that BPM is not correctly configured for a reason, the exact origin could not be identified. You can try two things: -.

    1. run the following command from the Ant and restart the Admin and managed servers
    Ant f install.xml post-install - DpiArgs - importGSOnly

    2. If Oracle BPM and WebCenter have been set up in different domains, configure the credentials of domain trust in the areas of the Oracle BPM and WebCenter.
    http://docs.Oracle.com/CD/E23943_01/Web.1111/e13707/domain.htm#SECMG404

    If the problem is still there, you can open the SR with Oracle and also take a look at the following bug which was released on May 24, 2012.
    Bug 13894890 : [SUP] ERROR NO METADATA FOUND BY METADATA OBJECT "/ WEB-INF/PROCESSAPPLICATIONST.

    Kind regards
    Imran

  • are there any idea of this space webcenter and process error

    Hi all
    I install a RC2BPM based on multidata rac and also configure it to a Webcenter, allow to serve in space webcenter.

    Here are a few exceptions which I could not, why the same action, different results, sometimes it works and sometimes it ejects such exception. I have just webcenter connection and create a model process BPM workspace.

    Thanks a lot, guys!

    Concerning
    Stella


    < 6 November 2011 19:25:05 PM PST > < error > < oracle.webcenter.spaces > < BEA-000000 > < exception is is produced when creating space for namespace = Helloworld2_6November2011due = >
    < 6 November 2011 19:25:05 PM PST > < error > < oracle.webcenter.spaces > < BEA-000000 > <
    oracle.webcenter.spaces.SpacesException: space created with the warning following: an unexpected error occurred when copying members of model BPM_Process_Workspace_Template space Helloworld2_6November2011
    at oracle.webcenter.spaces.internal.model.SpacesManagerImpl.createGroupSpaceInternal(SpacesManagerImpl.java:1864)
    at $200 (SpacesManagerImpl.java:224) oracle.webcenter.spaces.internal.model.SpacesManagerImpl.access
    to oracle.webcenter.spaces.internal.model.SpacesManagerImpl$ 1.run(SpacesManagerImpl.java:552)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:259)
    at oracle.security.jps.internal.jaas.AccActionExecutor.execute(AccActionExecutor.java:65)
    to oracle.security.jps.internal.jaas.CascadeActionExecutor$ SubjectPrivilegedAction.run (CascadeActionExecutor.java:68)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.security.Security.runAs(Security.java:41)
    at oracle.security.jps.wls.jaas.WlsActionExecutor.execute(WlsActionExecutor.java:47)
    at oracle.security.jps.internal.jaas.CascadeActionExecutor.execute(CascadeActionExecutor.java:50)
    at oracle.security.jps.internal.jaas.AbstractSubjectSecurity.executeAs(AbstractSubjectSecurity.java:129)
    at oracle.webcenter.spaces.internal.model.SpacesManagerImpl.createGroupSpace(SpacesManagerImpl.java:526)
    at oracle.webcenter.community.internal.view.backing.CommunityCreationBacker.createCommunity(CommunityCreationBacker.java:343)
    to oracle.webcenter.community.internal.view.backing.CommunityCreationBacker$ 1.call(CommunityCreationBacker.java:255)
    to oracle.webcenter.concurrent.Submission$ 2.run(Submission.java:484)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.webcenter.concurrent.Submission.runAsPrivileged(Submission.java:498)
    at oracle.webcenter.concurrent.Submission.run(Submission.java:424)
    to oracle.webcenter.concurrent.Submission$ SubmissionFutureTask.run (Submission.java:889)
    to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:442)
    to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
    at java.util.concurrent.FutureTask.run(FutureTask.java:139)
    to oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$ Worker.runTask (ModifiedThreadPoolExecutor.java:657)
    to oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$ Worker.run (ModifiedThreadPoolExecutor.java:683)
    at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.webcenter.spaces.operations.GroupSpaceOpsIgnorableException: an unexpected error occurred when copying members of model BPM_Process_Workspace_Template space Helloworld2_6November2011
    at oracle.webcenter.spaces.internal.model.operations.GroupSpaceOpsSecurityHandlerPlugin.copyMembersFromMetadataAndGrantRole(GroupSpaceOpsSecurityHandlerPlugin.java:658)
    at oracle.webcenter.spaces.internal.model.operations.GroupSpaceOpsSecurityHandlerPlugin.postCreateGroupSpace(GroupSpaceOpsSecurityHandlerPlugin.java:255)
    at oracle.webcenter.spaces.internal.model.SpacesManagerImpl.createGroupSpaceInternal(SpacesManagerImpl.java:1625)
    at $200 (SpacesManagerImpl.java:224) oracle.webcenter.spaces.internal.model.SpacesManagerImpl.access
    to oracle.webcenter.spaces.internal.model.SpacesManagerImpl$ 1.run(SpacesManagerImpl.java:552)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:259)
    at oracle.security.jps.internal.jaas.AccActionExecutor.execute(AccActionExecutor.java:65)
    to oracle.security.jps.internal.jaas.CascadeActionExecutor$ SubjectPrivilegedAction.run (CascadeActionExecutor.java:68)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.security.Security.runAs(Security.java:41)
    at oracle.security.jps.wls.jaas.WlsActionExecutor.execute(WlsActionExecutor.java:47)
    at oracle.security.jps.internal.jaas.CascadeActionExecutor.execute(CascadeActionExecutor.java:50)
    at oracle.security.jps.internal.jaas.AbstractSubjectSecurity.executeAs(AbstractSubjectSecurity.java:129)
    at oracle.webcenter.spaces.internal.model.SpacesManagerImpl.createGroupSpace(SpacesManagerImpl.java:526)
    at oracle.webcenter.community.internal.view.backing.CommunityCreationBacker.createCommunity(CommunityCreationBacker.java:343)
    to oracle.webcenter.community.internal.view.backing.CommunityCreationBacker$ 1.call(CommunityCreationBacker.java:255)
    to oracle.webcenter.concurrent.Submission$ 2.run(Submission.java:484)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.webcenter.concurrent.Submission.runAsPrivileged(Submission.java:498)
    at oracle.webcenter.concurrent.Submission.run(Submission.java:424)
    to oracle.webcenter.concurrent.Submission$ SubmissionFutureTask.run (Submission.java:889)
    to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:442)
    to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
    at java.util.concurrent.FutureTask.run(FutureTask.java:139)
    to oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$ Worker.runTask (ModifiedThreadPoolExecutor.java:657)
    to oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$ Worker.run (ModifiedThreadPoolExecutor.java:683)
    at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.webcenter.spaces.SpacesException: failed to retrieve information about BPM_Process_Workspace_Template because another user changes the BPM_Process_Workspace_Template. Please try again after some time.
    at oracle.webcenter.spaces.internal.model.template.SpaceTemplateImpl.getMetadata(SpaceTemplateImpl.java:287)
    at oracle.webcenter.spaces.internal.model.operations.GroupSpaceOpsSecurityHandlerPlugin.copyMembersFromMetadataAndGrantRole(GroupSpaceOpsSecurityHandlerPlugin.java:606)
    at oracle.webcenter.spaces.internal.model.operations.GroupSpaceOpsSecurityHandlerPlugin.postCreateGroupSpace(GroupSpaceOpsSecurityHandlerPlugin.java:257)
    at oracle.webcenter.spaces.internal.model.SpacesManagerImpl.createGroupSpaceInternal(SpacesManagerImpl.java:1625)
    at $200 (SpacesManagerImpl.java:224) oracle.webcenter.spaces.internal.model.SpacesManagerImpl.access
    to oracle.webcenter.spaces.internal.model.SpacesManagerImpl$ 1.run(SpacesManagerImpl.java:552)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:259)
    at oracle.security.jps.internal.jaas.AccActionExecutor.execute(AccActionExecutor.java:65)
    to oracle.security.jps.internal.jaas.CascadeActionExecutor$ SubjectPrivilegedAction.run (CascadeActionExecutor.java:68)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.security.Security.runAs(Security.java:41)
    at oracle.security.jps.wls.jaas.WlsActionExecutor.execute(WlsActionExecutor.java:47)
    at oracle.security.jps.internal.jaas.CascadeActionExecutor.execute(CascadeActionExecutor.java:50)
    at oracle.security.jps.internal.jaas.AbstractSubjectSecurity.executeAs(AbstractSubjectSecurity.java:129)
    at oracle.webcenter.spaces.internal.model.SpacesManagerImpl.createGroupSpace(SpacesManagerImpl.java:526)
    at oracle.webcenter.community.internal.view.backing.CommunityCreationBacker.createCommunity(CommunityCreationBacker.java:343)
    to oracle.webcenter.community.internal.view.backing.CommunityCreationBacker$ 1.call(CommunityCreationBacker.java:255)
    to oracle.webcenter.concurrent.Submission$ 2.run(Submission.java:484)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.webcenter.concurrent.Submission.runAsPrivileged(Submission.java:498)
    at oracle.webcenter.concurrent.Submission.run(Submission.java:424)
    to oracle.webcenter.concurrent.Submission$ SubmissionFutureTask.run (Submission.java:889)
    to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:442)
    to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
    at java.util.concurrent.FutureTask.run(FutureTask.java:139)
    to oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$ Worker.runTask (ModifiedThreadPoolExecutor.java:657)
    to oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$ Worker.run (ModifiedThreadPoolExecutor.java:683)
    at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.webcenter.webcenterapp.concurrent.WCObjectLockedException: required resources are in use. Please try again later.
    at oracle.webcenter.webcenterapp.internal.model.concurrent.WCWriteLockManagerImpl.acquireLock(WCWriteLockManagerImpl.java:314)
    at oracle.webcenter.webcenterapp.internal.model.concurrent.WCLockManagerImpl.acquireLock(WCLockManagerImpl.java:131)
    at oracle.webcenter.spaces.internal.model.template.SpaceTemplateImpl.getMetadata(SpaceTemplateImpl.java:265)
    at oracle.webcenter.spaces.internal.model.operations.GroupSpaceOpsSecurityHandlerPlugin.copyMembersFromMetadataAndGrantRole(GroupSpaceOpsSecurityHandlerPlugin.java:605)
    at oracle.webcenter.spaces.internal.model.operations.GroupSpaceOpsSecurityHandlerPlugin.postCreateGroupSpace(GroupSpaceOpsSecurityHandlerPlugin.java:255)
    at oracle.webcenter.spaces.internal.model.SpacesManagerImpl.createGroupSpaceInternal(SpacesManagerImpl.java:1625)
    at $200 (SpacesManagerImpl.java:224) oracle.webcenter.spaces.internal.model.SpacesManagerImpl.access
    to oracle.webcenter.spaces.internal.model.SpacesManagerImpl$ 1.run(SpacesManagerImpl.java:552)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:259)
    at oracle.security.jps.internal.jaas.AccActionExecutor.execute(AccActionExecutor.java:65)
    to oracle.security.jps.internal.jaas.CascadeActionExecutor$ SubjectPrivilegedAction.run (CascadeActionExecutor.java:68)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.security.Security.runAs(Security.java:41)
    at oracle.security.jps.wls.jaas.WlsActionExecutor.execute(WlsActionExecutor.java:47)
    at oracle.security.jps.internal.jaas.CascadeActionExecutor.execute(CascadeActionExecutor.java:50)
    at oracle.security.jps.internal.jaas.AbstractSubjectSecurity.executeAs(AbstractSubjectSecurity.java:129)
    at oracle.webcenter.spaces.internal.model.SpacesManagerImpl.createGroupSpace(SpacesManagerImpl.java:526)
    at oracle.webcenter.community.internal.view.backing.CommunityCreationBacker.createCommunity(CommunityCreationBacker.java:341)
    to oracle.webcenter.community.internal.view.backing.CommunityCreationBacker$ 1.call(CommunityCreationBacker.java:254)
    to oracle.webcenter.concurrent.Submission$ 2.run(Submission.java:484)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.webcenter.concurrent.Submission.runAsPrivileged(Submission.java:498)
    at oracle.webcenter.concurrent.Submission.run(Submission.java:424)
    to oracle.webcenter.concurrent.Submission$ SubmissionFutureTask.run (Submission.java:888)
    to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)
    to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
    at java.util.concurrent.FutureTask.run(FutureTask.java:138)
    to oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$ Worker.runTask (ModifiedThreadPoolExecutor.java:657)
    to oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$ Worker.run (ModifiedThreadPoolExecutor.java:682)
    at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.mds.persistence.ResourceLockedException: MDS-00557: /oracle/webcenter/framework/scope/scopedMD/spacetemplate/BPM_Process_Workspace_Template/scope.xml resource is already locked or is changing.
    at oracle.mds.internal.persistence.db.BaseReposAccess.getMDSException(BaseReposAccess.java:2182)
    at oracle.mds.internal.persistence.db.BaseReposAccess.acquireWriteLock(BaseReposAccess.java:476)
    at oracle.mds.internal.persistence.db.BaseDBMSCVersionSupport.acquireWriteLock(BaseDBMSCVersionSupport.java:208)
    at oracle.mds.persistence.DelegatingMSConnectionVersionSupport.acquireWriteLock(DelegatingMSConnectionVersionSupport.java:212)
    at oracle.mds.persistence.PTransactionVSupportImpl.acquireWriteLock(PTransactionVSupportImpl.java:103)
    at oracle.webcenter.webcenterapp.internal.model.concurrent.WCWriteLockManagerImpl.acquireMDSMetadataLock(WCWriteLockManagerImpl.java:478)
    at oracle.webcenter.webcenterapp.internal.model.concurrent.WCWriteLockManagerImpl.acquireWriteLock(WCWriteLockManagerImpl.java:405)
    at oracle.webcenter.webcenterapp.internal.model.concurrent.WCWriteLockManagerImpl.acquireLock(WCWriteLockManagerImpl.java:244)
    at oracle.webcenter.webcenterapp.internal.model.concurrent.WCLockManagerImpl.acquireLock(WCLockManagerImpl.java:131)
    at oracle.webcenter.spaces.internal.model.template.SpaceTemplateImpl.getMetadata(SpaceTemplateImpl.java:265)
    at oracle.webcenter.spaces.internal.model.operations.GroupSpaceOpsSecurityHandlerPlugin.copyMembersFromMetadataAndGrantRole(GroupSpaceOpsSecurityHandlerPlugin.java:605)
    at oracle.webcenter.spaces.internal.model.operations.GroupSpaceOpsSecurityHandlerPlugin.postCreateGroupSpace(GroupSpaceOpsSecurityHandlerPlugin.java:255)
    at oracle.webcenter.spaces.internal.model.SpacesManagerImpl.createGroupSpaceInternal(SpacesManagerImpl.java:1625)
    at $200 (SpacesManagerImpl.java:224) oracle.webcenter.spaces.internal.model.SpacesManagerImpl.access
    to oracle.webcenter.spaces.internal.model.SpacesManagerImpl$ 1.run(SpacesManagerImpl.java:552)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:259)
    at oracle.security.jps.internal.jaas.AccActionExecutor.execute(AccActionExecutor.java:65)
    to oracle.security.jps.internal.jaas.CascadeActionExecutor$ SubjectPrivilegedAction.run (CascadeActionExecutor.java:68)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.security.Security.runAs(Security.java:41)
    at oracle.security.jps.wls.jaas.WlsActionExecutor.execute(WlsActionExecutor.java:47)
    at oracle.security.jps.internal.jaas.CascadeActionExecutor.execute(CascadeActionExecutor.java:50)
    at oracle.security.jps.internal.jaas.AbstractSubjectSecurity.executeAs(AbstractSubjectSecurity.java:129)
    at oracle.webcenter.spaces.internal.model.SpacesManagerImpl.createGroupSpace(SpacesManagerImpl.java:526)
    at oracle.webcenter.community.internal.view.backing.CommunityCreationBacker.createCommunity(CommunityCreationBacker.java:341)
    to oracle.webcenter.community.internal.view.backing.CommunityCreationBacker$ 1.call(CommunityCreationBacker.java:254)
    to oracle.webcenter.concurrent.Submission$ 2.run(Submission.java:484)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.webcenter.concurrent.Submission.runAsPrivileged(Submission.java:498)
    at oracle.webcenter.concurrent.Submission.run(Submission.java:424)
    to oracle.webcenter.concurrent.Submission$ SubmissionFutureTask.run (Submission.java:888)
    to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)
    to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
    at java.util.concurrent.FutureTask.run(FutureTask.java:138)
    to oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$ Worker.runTask (ModifiedThreadPoolExecutor.java:657)
    to oracle.webcenter.concurrent.ModifiedThreadPoolExecutor$ Worker.run (ModifiedThreadPoolExecutor.java:682)
    at java.lang.Thread.run(Thread.java:662)
    >
    < 6 November 2011 19:25:05 PM PST > < WARNING > < org.apache.myfaces.trinidad.util.ComponentUtils > < BEA-000000 > < could not find the component with scopedId: PickDlg of RichPanelGroupLayout [UIXFacesBeanImpl, id = pglTo] with the supported syntax. The component was found with the deprecated syntax. Please use the supported syntax. >
    < 6 November 2011 19:25:05 PM PST > < WARNING > < org.apache.myfaces.trinidad.util.ComponentUtils > < BEA-000000 > < could not find the component with scopedId: PickDlg of RichMenu [UIXFacesBeanImpl, id = mTo] with the supported syntax. The component was found with the deprecated syntax. Please use the supported syntax. >

    There are a few lines with content partners, such as:

    Failed to retrieve information about the BPM_Process_Workspace_Template as another user changes the BPM_Process_Workspace_Template. Please try again after some time.

    Looks like a concurrency problem.

  • Current version of the data in the database has changed since the user has launched the process of update: tabular

    Hi people

    Version of the apex is 4.2

    Oracle database: 11.2.0.2

    I have created a simple form in a table on a table with the following structure

    {code}

    Name                                                  Null?    Type

    ----------------------------------------------------- -------- --------------

    TID NOT NULL NUMBER

    TEAM_NAME VARCHAR2 (30)

    EMP_NAME VARCHAR2 (30)

    DATE OF REPORT_DATE

    CATEGORY_NAME VARCHAR2 (30)

    NUMBER OF CATEGORY_HR

    CATEGORY_COMMENT VARCHAR2 (120)

    CREATED_DT                                                     DATE

    CREATED_BY VARCHAR2 (30)

    STATUS VARCHAR2 (1)

    {code}

    In the form of default table is

    {code}

    Select

    TID,

    TID TID_DISPLAY,

    TEAM_NAME,

    EMP_NAME,

    REPORT_DATE,

    CATEGORY_NAME,

    CATEGORY_HR,

    CATEGORY_COMMENT,

    CREATED_DT,

    CREATED_BY

    of ' #OWNER # '. " TIMESHEET.

    {code}

    I wanted to add an additional line inserted in the tabular presentation, that's why I included 'UNION ALL' in the query like this

    {code}

    Union of all the

    Select

    TID, null,

    tid_display null,

    team_name null,

    emp_name null,

    report_date null,

    category_name null,

    category_hr null,

    category_comment null,

    created_dt null,

    created_by null

    of the double

    {code}

    After having done that, I can see a blank line on the form of tables, but each time I fill data in the fields and press the "SUBMIT" button, I get the below error

    Current version of the data in the database has changed since the user has launched the process of update

    Thank you

    Navneet

    Why are you insert an extra line manually in tabular from?  There is a feature to add a line.

    If you want to insert a blank line when the page loads, then create dynamic action, this is a most appropriate feature.

    If you manually insert an extra line so that you have to write the update for this procedure.

    Leave.

  • When I open the Task Manager and select "Show processes from all users" there are 2 files virus csrss.exe?

    original title: virus csrss.exe?

    I use Vista Home Premium.  When I open the Task Manager and select "Show processes from all users" there are 2 files csrss.exe.  I learned that this indicates that I was infected by a virus.  Is this the case?

    Hi Julie,.

    Did you the latest changes on the system?

    Csrss.exe is Client/Server Runtime Subsystem.  All the Microsoft system has file csrss.exe running in the Task Manager, but it is likely to be infected by others. If it uses a lot of time processor and extremely abnormal in activities in the Task Manager, you can run a scan of the system security.

    You can read the following article to download the Microsoft Safety Scanner and perform a full scan on your computer.

    Microsoft safety scanner

    Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

    Hope this information is useful.

  • The Windows Task Manager - showing processes from all users

    Is it possible to get the Windows Task Manager to view all default processes?

    When the system is running very slowly it's a great nuisance to have to activate the "show processes from all users' the after you have opened the TM and waste valuable time in the process identifying guilty.

    Winston

    Hello

    I don't know of a way well there could be a... Here are some tips of perfomance and tools that can
    also be used as a troubleshooting tool.

    I just realized that if UAC is disabled him show all users remains active.

    ----------------------------------------------------------------------------------

    Process Explorer can be very useful for you.

    Be careful that a lot of these programs and services really need run and often remove some fact little
    at the speed of the machine while making the less easy to use machine.

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135

    To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
    The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
    a small box in the lower-left - show for all users can check only).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.

    Method 1 using Windows Defender will tell you more specific information about each program.

    ---------------------------------------------

    It's a little more complicated that you might have a few running services that you can do without.

    Also some programs add services that might not really need to start automatically.

    To see these compare these in Start - type in the search box-> find Services at top right click on RUN AS ADMIN as the default Vista as shown here by BlackViper. Ignore and who are disabled (which do not run) or manual (which work only on request) - for any automatic or automatic delayed start you can post them here if you need help to decide if you should run. Some of these can be assigned to the stop and
    Manual if the program calling can run them as needed.

    BlackViper made also some improvements to default windows services but I wouldn't do those unless you
    really understand the full meaning of change a default service. Then use it as a tool to compare.

    Windows Services - list by default.
    http://www.blackviper.com/WinVista/servicecfg.htm

    WhatInStartup - free - disable/enable/remove of programs at Windows startup
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    -----------------------------------------------------------

    Here are some tools that will help:

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
    they loaded and much more. This exceptionally effective utility will show you even owned by each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to startup automatically when your system boots and you
    opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
    start the settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
    starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
    The command - line String, product name, file Version, company name, location in the registry or the file system,
    and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • Task Manager Windows 'show all processes from all users' will not work

    Hi im running service of 64 bit vista Home premium pack 2

    For some reason any button "show all processes from all users" in the Task Manager will not work, when I click nothing happens, uac prompt little or nothing.

    I can end processes very do well no problem it's just the show all button that does not work, I thought that maybe the taskmgr.exe in my right-click system32 folder and compatiability tab and running it as admin it would work, but the compatiability tab is completely grayed out all I can't click anything in it.

    Im not a big computer wiz, but I checked my user accounts account im logged on says that it is the administrator and UAC is on.

    On a side note do not know if this has nothing to do with my problem but recently my computer has got contracted a Trojan horse that has infected the mrt.exe file, I had to delete, now I get an error during windows startup associated with mrt.exe works not properly. any suggestions how to solve this problem too

    Hello

    Make sure that the malware is removed completely

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    _____________________________________________________________________

    also run the sfc/scannow command.

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

    How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

    http://support.Microsoft.com/kb/928228#appliesTo

    If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

    read the below tutorial on how to perform a repair installation

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  • I get a message from space.

    I just downloaded creative cloud to my laptop. I get a message from space. You want to buy a desktop computer in order to have more space. Can I use cc on two separate computers?

    At THE beginning I couldn't download lightroom or photoshop. I deleted all the photos in my iPhoto folder and put. Only, I've added a few photos select return to iPhoto. I tried moving them in lightroom (following the tutorial) but the message says not enough space. I'm frustrated because I have this great thing that I can't use!

    Thank you

    Annette

    Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

    -Windows or Mac has no importance... 2 on the same operating system or 1 on each

    -Computer cloud subscriptions can not be used at the same time

  • How the portlet uses it's own security Webcenter App / spaces Webcenter?

    Hello.
    How the portlet uses it's own security Webcenter App / spaces Webcenter?
    I can't get google userfull and oracle help, you can give me some advice?
    Thank you very much ~

    I do not have testicles but it seems normal that your "application" lost security constraints when you put it into a portlet.
    An ADF application uses another way to set security. Portlets using portlet standard which is something other than the ADF security model. In order to create security on the portlet, you should follow the standard portlet and not the safety of the ADF.

  • Skinning: disabling compression of content spaces WebCenter

    Hello

    We strive to make a recount in WebCenter spaces, disable compression of content so that we can see the full class names in the html code returned (using Chrome) instead of abbreviations.

    I changed the part of the Web.XML of the project the jdev DesignWebCenterSpaces WebCenterSpacesExtensionLibrary asked the following:

    < context-param >

    org.apache.myfaces.trinidad.DISABLE_CONTENT_COMPRESSION < param-name > < / param-name >

    < param-value >true< / param-value >

    < / context-param >

    and redeployed from the WebCenterSpacesExtensionLibrary.

    This should result in full class names, but when we inspect the Chrome elements, class names are always compressed. We tried also manually add the web.xml file to an earlier version of the WebCenterSpacesExtensionLibrary. Once again no effect.

    Does anyone have an idea why it doesn't work? We missed something?

    see you soon

    Christa

    Hello.

    Check the following to make sure that you are changing and successfully deploy the web.xml file :

    • In the DesignWebCenterSpaces app, add the file web.xml as a resource in the deployment of the extension of the WebCenter spaces.
    • In the WebCenterSpacesExstensionLibrary project, access the deployment called custom_webcenter_spaces_war profile
    • In file-> files-> filters Web groups, check the web.xml to be included in the deployment.
    • The web.xml file will be shown in the project and can be deployed within the extended library. Now we can add / replace the context parameters or add custom servlets. NOTE: When you add technologies or dependencies to the project, web.xml can be filled automatically with filters and more. You must keep this file with new information / crushed. If you have content added then Scripts ANT redeployment will fail and spaces may not work properly.

    The deployment using ANT Scripts file WAR extend.spaces.webapp.war is created in the deployment of the WebCenterSpacesExstensionLibraryfolder. Open and check that it brings the web.xml.

    If everything is correct and the changes does not seem to be applied, then try following:

    • Stop the servers WC_Spaces and clean /_WL_user tmpfile associated with managed servers (Temporal caching of files).
    • In the case does not properly then follow the standard steps to manually change the file web.xml internally of the webcenter.ear/spaces.war of the [ORACLE_WCHOME] / archives /...

    In addition, don't forget to clear the cache of the browser.

    I hope this information helps.

    Kind regards.

  • Great for the background process paging space

    Hello
    in my former base 9.2 (on AIX) I see paging high use of space for background processes.
    #> svmon -Pg -t 1 |grep Pid ; svmon -Pg -t 10 |grep "N"
     Pid Command          Inuse      Pin     Pgsp  Virtual 64-bit Mthrd  16MB
 2285578 oracle          304609    81552   500909   605395      Y     N     N
 3350676 oracle          304588    81552   500643   605149      Y     N     N
 1794254 oracle          304592    81552   500634   605126      Y     N     N
 2744508 oracle          304567    81552   500189   604671      Y     N     N
 2588796 oracle          304700    81552   499905   604421      Y     N     N
  708788 oracle          304657    81552   499842   604336      Y     N     N
  598034 oracle          304621    81552   499696   604182      Y     N     N
 3035252 oracle          304666    81552   499662   604167      Y     N     N
 2736282 oracle          239031    81552   418381   522499      Y     N     N
 1220740 oracle          238960    81552   418310   522410      Y     N     N

#> ps -eaf|grep 2285578
  ora9R2 2285578       1   0   Mar 01      -  0:28 ora_pmon_MYDB

#> ps -eaf|grep 3350676
  ora9R2 3350676       1   0   Mar 01      -  0:34 ora_dbw0_MYDB

#> ps -eaf|grep 1794254
  ora9R2 1794254       1   0   Mar 01      -  1:24 ora_ckpt_EGOV
    The database do nothing (from 09:00 to 17:00):
    Load Profile
~~~~~~~~~~~~                            Per Second       Per Transaction
                                   ---------------       ---------------
                  Redo size:                852.37             37,511.73
              Logical reads:                 31.39              1,381.25
              Block changes:                  3.35                147.35
             Physical reads:                  0.09                  3.96
            Physical writes:                  0.16                  6.89
                 User calls:                  2.24                 98.51
                     Parses:                  1.33                 58.34
                Hard parses:                  0.10                  4.27
                      Sorts:                  0.63                 27.93
                     Logons:                  0.01                  0.61
                   Executes:                  2.07                 91.04
               Transactions:                  0.02
    But the free bolt is 40%:
    Top 5 Timed Events
~~~~~~~~~~~~~~~~~~                                                     % Total
Event                                               Waits    Time (s) Ela Time
-------------------------------------------- ------------ ----------- --------
latch free                                          1,580          88    42.63
    File system mount options are correct (cio of dbf, etc.)
    Parameter:
    filesystemio_options                 string      async
disk_asynch_io                       boolean     TRUE
optimizer_mode                       string      RULE
    Any ideas why it uses a lot of paging space?
    Thank you.

    Mr.D. says:

    sb92075 wrote:

    Mr.D. says:
    Hello
    in my former base 9.2 (on AIX) I see paging high use of space for background processes.

    What value will the use of paging to be OK to be 'high '?
    Is this true & valid value for EACH database on this planet?

    Do you realize that the modern BONES are actually DESIGNED for the page?
    So why is that a bad thing, report you it?

    Yes I realize
    But if topas show me about 20% wait for I/O and the affected hdisk is the swap and it is occupied about 97 to 100%
    I think that there is a problem.

    Thank you.
    >
    >
    >

    Hello
    in my former base 9.2 (on AIX) I see paging high use of space for background processes.

    What value will the use of paging to be OK to be 'high '?
    Is this true & valid value for EACH database on this planet?

    Do you realize that the modern BONES are actually DESIGNED for the page?
    So why is that a bad thing, report you it?
    Yes I realize
    But if topas show me about 20% wait for I/O and the affected hdisk is the swap and it is occupied about 97 to 100%
    I think that there is a problem.

    Thank you.
    If the OS is really trading & Oracle is only application on the server system, then SGA is too big.

  • launch an exe from a swf

    For a long time I have played with anything whatsoever in FLASH, so it may not be a solution.

    We have some exe files with the content of the training that we host on our database.  We want to make them play since a swf that opens on a new slide, a button of completion when the exe reading ends.  We usually use Captivate, but I'm not having any luck have Captivate launch exe files, so I thought I'd see what you all fly away.

    Thank you

    Susan

    It makes more sense.

    Unfortunately something as simple that the setting of the end action to open a file or a URL would nothing more than what Flash would do with navigateToURL(). If you specify the .exe of the course if he tries to load this .exe in a browser which will probably just ask you to save the .exe (like Chrome). To my limited knowledge of Captivate, there are no simple built in interaction capable of launching an .exe, especially not since a SWF as he always limited the capabilities of SWFs. Launch of executable files is not an ability to a SWF file, without worrying about whether Flash or Captivate made. And you couldn't watch the process of the EXE for a SWF to know when it ends without worrying.

    Are executable files, you must run simply other projectors Captivate or Flash projectors and if so you have access to the source files for them? If you can get just those published in SWF, then you will not need to launch an executable at all. It is the ideal way.

    If this isn't the case, then I think that you are up a Creek without a paddle without invoking an advanced solution. This goes against what seems to be your desire, however, who should not use executable files, but only an executable with permission to run a process is able to start one of these .exe.

    For example, you could publish your course in format SWF from Captivate. You can import this SWF in a Flash project and then use the features of Flash/AIR. You have to find a way to detect the end of a Flash of Captivate race by recovering to issue something could detect Flash/AIR (maybe it's the last frame of the SWF file or something else easy, or you might need a tip action). Once that alerts you Flash/AIR that the quiz is over, AIR would be able to launch an executable.

    Apart from that I don't see what you want as possible with Flash. The executables are the OS-level security and SWF is just not capable.

  • Popup in portal space WebCenter

    I develop my portlet through the bridge of the ADF and
    My portlet has a popup that I used to display a modal window.
    <af:panelStretchLayout id="parent" topHeight="0" bottomHeight="0"
                          startWidth="0" endWidth="0">
<f:facet name="center">
          <!--code here-->
</f:facet>
<f:facet name="top">
     <af:popup id="popup" contentDelivery="lazyUncached"
                 autoCancel="enabled" eventContext="launcher"
                 launcherVar="source">
          <!--code here-->
       </af:panelWindow>
     </af:popup>
  </af:group>
</f:facet>
</af:panelStretchLayout>
    When I deploy as a portlet in the popup, webcenter spaces seems to be in the
    limits of the container portlet not out causing the portlets to have scrollbars.

    Is it possible that I could configure the popup to come out of the portlet and in the
    front of the viewport of the user and act as a modal window?

    Thank you

    >

    Is it possible that I could configure the popup to come out of the portlet and in the
    front of the viewport of the user and act as a modal window?

    Thank you

    This is a limitation of the portlet model - especially if you use the bridge: ADF portlets are rendered as iframes.

    The option you have is to deploy the application (portlet, etc.) as a library ADF with your installation space - essentially "expansion of space" rather than "deploy a portlet.

  • Customizing task spaces WebCenter flows (Nov. 2010)

    To all those who know:

    I tried to reach a customization of the workflow WebCenter spaces and have been using this white paper (March 2010) as a reference:

    http://www.Oracle.com/technetwork/middleware/WebCenter/OWCs-ps1-custom-taskflow-WP-129410.PDF

    In the white paper, I'm following with 'prepare WebCenter spaces for customization of task flow:

    ---
    To customize the workflow in WebCenter spaces:
    1. download the Oracle Technology Network (http://www.oracle.com/technology/products/webcenter/files/oracle.webcenter.customization_application.zip) oracle.webcenter.customization_application.zip and extract the content locally.

    2. in JDeveloper, open the SpacesTaskflowCustomization.jws file.
    ---

    Sounds simple... but the file "oracle.webcenter.customization_application.zip" seems to have disappeared from the Oracle.com website: I get redirected to the WebCenter product page when you try to access the URL provided in the zip file.

    This raises two questions:

    (a) is the method described in the book 'valid' - in other words, do I have to download the customization_application zip file and...

    (b) If Yes, where can I get the file? (I've tried a number of strings to search in the box 'search', not to mention "Custom Task flows", the name of the ZIP file, etc. - with no luck).

    Any help is appreciated! (Thanks!)

    http://www.Oracle.com/technetwork/middleware/WebCenter/OWCs-R11-extend-spaces-WP-132596.PDF should have everything you need including links to the files correct zip for your version of spaces.

  • Launch the application from a url in the browser for BlackBerry?

    I'm developing an application where I will launch a url in the browser where I run my application.

    Suppose if I click google.com , and then press enter, it will launch my app. For this, I tried with the HttpFilterRegistry API.

    For reference, I use the HTTPFilterDemo application. But currently while launching the application, I get the NullPointerException .

    I wrote the code below I have the openFilter method:

      public Connection openFilter( String name, int mode, boolean timeouts ) throws IOException
    {
        Logger.out("Protocol", "it is inside the openFilter method");
        _url = name.substring(2);
        _requestHeaders = new HttpHeaders();
        _responseHeaders = new HttpHeaders();
        _responseHeaders.setProperty(HttpProtocolConstants.HEADER_CONTENT_TYPE, "text/html");

        // Attempt to parse for the file name
        int slashIndex = name.indexOf('/', 2);
   if (_resultData == null)
        {

final int modHandle = CodeModuleManager.getModuleHandle("AppLaunchBrowser");
                    Logger.out("Protocol", "here is the module handle:::" +modHandle);
                    final ApplicationDescriptor[] apDes = CodeModuleManager.getApplicationDescriptors(modHandle);
//                  final String[] arguments = new String[1];
                    final ApplicationDescriptor appDescriptor = new ApplicationDescriptor(apDes[0], new String[]{});
                    Logger.out("Protocol", "here is the app descriptor:::" +appDescriptor);
                    try {
                        final int appCode = ApplicationManager.getApplicationManager().runApplication(appDescriptor, true);
                        Logger.out("Protocol", "here is the app code:::" +appCode);
                    } catch (ApplicationManagerException e) {
                        // TODO Auto-generated catch block
                        e.printStackTrace();
                    }
     }
        return this;
    }

    And I am creating alternative entry point in the application class and using as below:

    public class AppLaunch extends UiApplication{
    public static void main(String args[])
    {
        Logger.out("AppLaunch", args+"length of the arguments::::" +args.length);
        if((args != null) && (args.length > 0) && (args[0].equals("background")))
        {
            Logger.out("AppLaunch", "in the alternate entry point");
//          Logger.out("AppLaunch", args+"length of the arguments::::" +args.length);
            HttpFilterRegistry.registerFilter("www.google.co.in", "com.innominds.ca", false);

        }
        else
        {
            Logger.out("AppLaunch", "Inside the Applaunch");
            AppLaunch theApp = new AppLaunch();
            theApp.requestForeground();
            Logger.out("AppLaunch", "created the app launch object");
            theApp.enterEventDispatcher();
//          Logger.out("AppLaunch", "in the alternate entry point");
//          HttpFilterRegistry.registerFilter("www.google.co.in", "com.innominds.ca", false);
        }
    }

    public AppLaunch()
    {
        checkPermissions();
        showTestScreen();
    }

     /**
     * This method showcases the ability to check the current permissions for
     * the application. If the permissions are insufficient, the user will be
     * prompted to increase the level of permissions. You may want to restrict
     * permissions for the ApplicationPermissionsDemo.cod module beforehand in
     * order to demonstrate this sample effectively. This can be done in
     * Options/Advanced Options/Applications/(menu)Modules.Highlight
     * 'ApplicationPermissionsDemo' in the Modules list and select 'Edit
     * Permissions' from the menu.
     */
    private void checkPermissions()
    {

        ApplicationPermissionsManager apm = ApplicationPermissionsManager.getInstance();
        ApplicationPermissions original = apm.getApplicationPermissions();

        if(original.getPermission(ApplicationPermissions.PERMISSION_BROWSER_FILTER) == ApplicationPermissions.VALUE_ALLOW)
        {
            // All of the necessary permissions are currently available
            return;
        }

        ApplicationPermissions permRequest = new ApplicationPermissions();
        permRequest.addPermission(ApplicationPermissions.PERMISSION_BROWSER_FILTER);

        boolean acceptance = ApplicationPermissionsManager.getInstance().invokePermissionsRequest(permRequest);

        if(acceptance)
        {
            // User has accepted all of the permissions
            return;
        }
        else
        {

        }
    }

    /**
     * Shows the test screen to allow the user to exercise the application
     * permissions capabilities.
     */
    private void showTestScreen()
    {
        UiApplication.getUiApplication().pushScreen(new AppLaunchScreen());
    }
}

    can someone please help... Sorry for the almost total code display...

    I was finally able to solve this problem. NPE is to come in other methods of recall because I'm implementation of the FilterBaseInterface.

Maybe you are looking for

  • Duration of the Image will not always change 3

    It's crazy, there must be a button somewhere that I missed. Since the upgrade, I've not been able to adjust the duration of a still image. When I import a new still image in the project Timing prperties are automatically set to:In: 1 (in pictures) Ou

  • Cannot get my Realtek HD microphone for computer XP

    Original title: Microphone problems I can't get my mic to work.  XP SP3 HD Realtek. Advanced tab in Audio input is grayed out.  Have tried to reinstall the soundcard by removal of the device and then Manager looking for new hardware.

  • Can I download Windows 10 and keep Windows 7 on a separate partition

    I have Windows 7 if I download Windows 10, can I download it on a partition on my hard drive so I can keep 7? If this isn't the case, I have Windows 7 on a disk, I can upload on a partition and level 10?

  • Use of broadband - Adobe Photoshop and Lightroom;  and request for bridge

    HelloI recently picked up a subscription to creative cloud for Photoshop and Lightroom.First question: I use bandwidth every time I have to edit an image in Photoshop?  Or is it just on bandwidth for the download/installation of the original applicat

  • updating of the component of region

    Hi all I use JDeveloper 11.1.1.6.0. I created my page ADF panelTabbed component (it is not a model). in each tab, I dragged other workflows as a region. I have an outputText in the page, which should be refreshing by clicking a button within the regi