launch buttons quick Pavilion 15-n009ee

Hello

I need it please quick launch buttons pavilion 15-n009ee driver for windows 7 64 bit

Thank you

Hello:

You can try this software from a different model.

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104698-1&cc=us&DLC=en&LC=en&OS=4063&product=5273547&sw_lang=

Tags: Notebooks

Similar Questions

  • HP elitebook 8470p: my button mute in my launch buttons quick rest orange when the speakers are not dumb.

    When I push the mute button, it works but rest orange alone does not change. It must be white in his.

    Hello

    The only other suggestion I have would be to try to install the Windows driver 8.1 IDT Audio for your laptop - if you want to try this, it's on the following link.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212842 & swItemId = ob_124404_1 & swEnvOid = 4158 #TAB4

    Restart after installing this driver.

    Kind regards

    DP - K

  • HP elitebook 8440p quick launch buttons

    Hello

    How can I change the launch button quick email to open an other than outlook e-mail client.
    I put the mozilla thunderbird as my default email client when you install, but the quicklaunch button even opens outlook.

    I am running windows 7 32 bit.

    Any help would be greatly appreciated.

    Thank you
    Conor

    Ok. Just read this and look at this photo. I've marked the values you need to change.

    assignment 1: & AssignmentDisplay

    You need the exe directory. For example, I made an extra folder in my C drive, so I could add the directory easily. For you since you're using Thunderbird, it should look like this: C:\Program Files (x 86) \Mozilla Thunderbird\thunderbird.exe

    2: name

    It's just the name of the program that you will be running. Given that mine is Minecraft, I put in Minecraft. You put: Thunderbird

    Good luck and Msg again if you need assistance.

    PS Sorry about the end station. Did not see in my Mail box.

  • his quick launch button does not work when I installed windows 8 in my computer hp laptop pavilion dv3z

    1. number and product name
    laptop HP pavilion dv3z

    2 operating system installed (if applicable)
    Windows 8

    3. All changes to your system until the problem occurred
    installed windows 8

    When I installed windows 8 in my pc laptop hp pavilion dv3z, the quick launch of the volume button is always red and the sound is mute... the driver for quick launch buttons and pilot for the sound is also up-to-date... can you help me please?

    When installing the audio driver, it installed following the instructions or mode of compatibility as shown here?

    Based on the software and drivers page for this device, the device was not tested and certified for Windows 8.  This means that some features may not be the same as the device was not designed for Windows 8.  See this site for more information and to find out if it has been tested for Windows 8.

    If the audio driver has not been installed in compatibility mode, I recommend using the 64-bit Windows 7 found here driver and using the related steps above to install in compatibility mode.

    Let me know what happens.

  • Quick Launch buttons

    Hello

    I have a Pavilion dv7 - 2230ev running windows 7 complete edition x 64 after a new installation of the operating system. Although I could solve the problem with my buttons to quick launch to upgrade the BIOS of my product page and they are now fully functional, I don't get the volume slider window. I tried some updates of the quick launch buttons but did not work. Is it possible to fix this?

    Hello

    If you want to see the Visual display you will need to download and install:

    MediaSmart SmartMenu here (version 3.1.2.2 for 32/64-bit Win7)

    Until you do that you must have installed at least one application of the MediaSmart software package. The best choice will be in my opinion:

    MediaSmart DVD here (version 4.2.5122 for 32/64-bit Win7)

    If you do not want to use on top of software just to have the display on-screen en volume then check the app below:

    3VRX here (version 2.5 for 32/64-bit Win7)

    Note:

    Here is YouTube video that shows what can be done with the 3VRX software.

  • HP pavilion DV7-6c10so: cannot install HP Quick Launch on HP Pavilion DV7-6c10so

    I am really pulling my hair out on this one. Recently I swapped my brothers HARD drive into his laptop, and with that we decided to do a clean installation of windows. Evrything went smooth and well with the excavation and activate Windows. But I ran to a problem with the installation of some software and drivers HP. All drivers except 2 would install properly. Once, it was a hassel to install were the drivers Bluetooth and wi - fi. That's what happened when I tried to launch the exe to install:

    A window opens saying some information on im about to install software. I press next here.

    in the next step, I accept the EULA and press Next.

    Then begins the extraction process and once it has been done the window close.

    After this a windows installer window appears saying: preparing for installation...

    This was followed by: Please wait while Windows install configures the installation...

    During this stage, the progress bar fills upp to 100% and the window closes, and that's all. No message telling me the installation was a success or a failure. no error code or message. If I check the Device Manager I can be that the driver is not installed. I solved this problem by right-clicking on the device and then choose install driver and then find the extracted folder and choose the driver in there.

    But here's the tricky part and my problem, I need the software of quick launch buttons asswell but Installer is broken here as well. but since this isn't a driver I can't operate by itself.

    I let the Installer do its thing and all that with the drivers just sort of stops. No messagege not nothing. The program does not appear in the Control Panel, the task bar or in active processes (yes I restarted the computer). However I find it under Add/Remove programs in the Control Panel, so the computer thinks its installed. the same for HP software executives, but it is not as important.

    If I go to the extracted installation location I get a lage Setup window that says welcome to the quick launch HP Setup Wizard. Here, I choose to remove it ocr fix/repair it. I tried manny time to fix but I doesent help. I uninstalled and then installed using this installer manny thus times. Nothing helps. but atleasst with this installer, I get a quick launch of HP has been successfully installed message, yet it doesent work.

    what I tried:

    I installed each updates windows and .net.

    I tried to install an older version (for software farmeworks and quick launch).

    I reformatted and reinstalled the computer once again to see if the problem was caused by windows.

    go to the installation folder and run there (only for software frameworks).

    News of the computer:

    model: HP Pavilion DV7-6c10so

    Shipping os OS: Windows 7 Home premium x 64

    After reformatting operating system: Windows 7 Home Premium x 64

    I'm in the desperaste need to get this working because it's my brothers computer and it needs today to come back later and I said wrong I work just like before.

    Sorry for the bad English everybody!

    Hello

    In this case, it may be worth trying the following.

    Uninstall the current version QLB and restart.

    Download the version from the following link and save the installation program.

    http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56929.exe

    Use software such as 7-Zip manually extract the contents of the Setup program, and then run the setup.exe routine (20 KB) as an administrator since the extraction folder.

    This can or can not give an indication that it completed - if not, leave it for 5 minutes, then restart.

    If it still does not work, check if the routines are present in C:\Program Files (x 86) \Hewlett-Packard\HP quick launch area and let me know - I'm going to work but to hope to be back within the hour.

    DP - K

  • HP - Fail quick launch buttons

    Laptop HP Pavilion dv7-1000 series

    Microsoft Windows Vista (64-bit)

    HP Quick Launch Buttons don't work correctly... the sound (Mute) button is stuck on... It still works but stays on. More embarrassing, then nothing. Any ideas? I tried to reinstall the driver without change.

    Codec IDT high definition

  • Quick Launch button uninstall (or fix)

    HP Pavilion dv4 - 1365dx


    s/n: [text removed for privacy]

    p/n: NM037UA #ABA

    OS: Windows 7 Home Premium x 64-put update from Vista Home Prem x 64 via HP upgrade

    Details: Ok... So, I'm about to pull my hair out on this one.  I did everything HP has told me to do (re - install HP QLB soft/drivers, update BIOS, update of IDT Audio) and even tried to remedies, I read on the internet (unscrew the battery with the power cable, etc.).  My button mute is stuck red.  Even system restore will be the only use it for a day at the most. Basically, great laptop but I cannot wait until this network button is stuck red.   Which is why I'm asking... anyone know how I can completely bypass QLB and great glory?  Also, I can use my shots audio but as I said, if the button Mute control speakers... what happens if this network never button stays red?

    Summary: I need help bypassing QLB completely or at least how I can solve this problem.  Thank you!

    Before your upgrade to W7, the quick launch buttons were functioning normally?

    What I read he sound like you've already tried this, but reinstall your sound driver IDT. Just humor me.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&LC=en&DLC=en&cc=us&lang=en&OS=2100&product=3919634

    This one is for Vista and if that one doesn't work, try this one.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75537-1&LC=en&DLC=en&cc=us&product=3919634&OS=4063&lang=en

    If she says that one of them is already say 'Yes to replace all' reinstall after a restart of course.

    In addition, your net work button works, but you're worried that it will begin to do so, correct?

    The only problem is now so just with the mute button?

    If none of the works above, let's try a more radical solution.

  • Windows 7 quick launch buttons - Reg

    Hello

    I use HP Pavilion laptop dv5-1102TU.

    I have recently upgraded to Windows 7 Ultimate from Windows Vista Home Basic by results of Windows 7 upgrade advisor.

    After the installation of Windows 7 quick launch buttons work for me, but light does not change its status (red white) instead its just in white always.

    I installed the driver provided in the link below

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=in&DLC=en&sw_lang=&product=3814...

    If I need to take some other driver?  Also, in the drivers section, I see 2 unknown devices (drivers not installed). When I checked its properties, so I found driver for this device "Intel(r) ICH9M LPC Interface Controller - 2919" is not available. ". So where can I find this driver?

    Kindly help me out in the present.

    Waiting for solution!

    Thanks in advance

    Kind regards

    Swami

    Hello

    I installed ' ENE CIR Receiver ' of link HP driver for my laptop and it fixed both my questions below, I mentioned in my previous posts.

    Fast light number of launch button - after installing the driver referred to above, its works for me

    Unknown device with yellow check mark for "Intel(r) ICH9M LPC Interface Controller - 2919" - he disappeared once I installed the driver above. "" I found this, after a lot of searching on Google.

    Kind regards

    Swami

  • HP Quick Launch buttons for Windows 7 to work a bit now, they have stopped working

    So I installed windows 7 x 64 on my HP Pavilion DV9700t. I had no problem using the Upgrade Advisor. My current rating is 4.9
    Everything is much more vivid and works fine, except the HP Quick Launch buttons.
    Initially, they worked so I could control the volume buttons, mute and media. So I don't remember exactly what I did and I installed an update or a specific package of the software HP Quick Launch buttons and they stopped working.

    I do not use the system restore and I mixed through several HP software packages including: SP40139, SP44777, SP39425. These seem to install fine and starts the process of quick launch control. However, the buttons do not always work. I even started the HP Quick launch in Windows Vista compatibility mode buttons.

    So I was wondering how I can return to pilot initial KB that happened when I installed Windows 7. Which seemed to have done the trick, but I don't know what it was.

    HP is too lazy to support my laptop brand, even if it is more than enough to run Windows 7.

    Thank you!

    -octi

    Hi Covrigus Deus,

    I will suggest you to uninstall and reinstall the HP Quick Launch button software and reinstall it back. You can check the latest HP Web site package.
    For help with respect to uninstall and reinstall, you can visit the HP website for the instructions.
    If, however, the Quick Launch button still doesn't work after you have performed the steps in the abvoe, I will propose you to complete the restore of the system.

    To restore the operating system to an earlier point in time, follow these steps:

    1. System restore click Start, type in the search box and then click on the system restore listed programs.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    1. In the System Restore dialog box, click on choose a different restore point and then click Next.
    2. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
    3. Click Finish.

      The computer restarts and system files and settings are back to the State they were in when the restore point was created.

      For more information, see:

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

    http://support.Microsoft.com/kb/936212

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think

  • Quick Launch buttons uninstall problem

    Installed from Download FTP site HP Quick Launch Buttons produced version HP 6.50.18.1 (sp49456) by mistake (is install the Quick Launch bar). Now impossible to uninstall HP Quick Launch Buttons sp49456 in programs and features in Control Panel. Have tried several times (error:-5005: 0 x 80070002). Also tried several times to reinstall sp49456 more old install and uninstall then from programs and features - even in Safe Mode - but does not work. Finally advised Support HP to do a system restore prior to facility QLB, but my system has no earlier restore points. Is it possible to make some kind of manual uninstall - registry maybe? Please notify.

    System Specs:
    -G4-1319tu Pavilion
    -Windows 7 64 bit
    -error:-5005: 0 x 80070002 (when you try to uninstall)

    Hello

    OK, let's try another method.

    First, install the incorrect file buttons to quick launch once more and once completed, restart the laptop.

    Download and install the free Revo Uninstaller from the link below.

    http://www.revouninstaller.com/download-freeware-version.php

    Revo and see if it recognizes the QLB software. If this is the case, right click on the program icon you want to remove and choose uninstall. This will launch at the beginning of the uninstall routine own applications that will almost certainly fail again - continue anyway.  During the process, that you may be asked to remove the registry entries, simply select all and then click on remove. Do the same for all the remnants of files and folders. Once the uninstall is complete, reboot the laptop.

    Kind regards

    DP - K

  • DV8T HP Quick Launch Button problems

    On my HP Pavilion DV8T, my quick launch buttons keep it up. My wireless light turns off by itself, and in same time, my treble and bass will fluctuate. When this happens, if I type something in that she left the window, I'm and a treble/bass window appears. Also sometimes, like now, my mute button and my wireless button will not even appear or work. I have tried everything I can think, I have reformatted the hard drive, downloaded the drivers, and I've even sent in HP and they doesn't fix it. Any ideas would be appreciated.

    Thank you for your time,

    Cameron

    Hi Camde,

    This seems to be a problem reported by other users on the HP forum.

    Here's a link with some troubleshooting steps and some info on a patch, you can try:

    http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/HP-Pavilion-dv8t-1000-CTO-treble-bass-indicator-keeps-popping-on/m-p/220247

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP Envy 15 æ 103NA: HP Quick Launch buttons Drivers + utility to system events

    Hi all

    If anyone knows where I can get these drivers?

    I said I need both in order to get the keyboard shortcuts to work (brightness, volume) etc.

    I have the HP recommended events utility installed... but still nothing works, it would be the HP Quick Launch Buttons driver?

    Kind regards

    Adam

    You're welcome, Adam.

    Interesting... maybe I'm wrong on the QuickLaunch software...

    I have a G1 350 HP business notebook, which came out in 2013 - 14 (I got mine last year).

    I just checked the driver for that page and they stuck the old version of software of quick launch on the support page of my laptop, so maybe that will work...

    http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6709431 & swItemId = ob_104698_1 & swEnvOid = 4059 #tab1

    If it does not either, then see if the new hotkey software works from this professional HP laptop.

    http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827 & swItemId = ob_158963_1 & swEnvOid = 4058

    I can help you with the indicators of volume and screen brightness...

    You can get a slightly different Visual you W10, but that's all that is currently available for W7.

    http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_137574_1#tab1

    Best regards

    Paul

  • Tx1000 and quick launch buttons

    Hello

    I have a Tx1000 (REF RX695AV) on which I did a clean install of Windows 7 ultimate x 64.

    The touchscreen works can I open/close and drag the programs with the stylus.  So do the buttons (Play, following precedent and Stop) multimedia.
     
    What does work are the four quick launch buttons (screen rotation, display settings, start the QuickPlay, DVD).  I tried to install Vista 64 (sp38171.exe) for the latter and while I now have a driver listed for the buttons located under the computer management, on the triggers of associated program starting a 'known compatibility issues"of Windows 7.  (If I run it there seems to be problems with Windows Explorer.)
     
    The button that I really want to work is the screen turn.  (The display settings are nice to have).  Can I do to get this key work?

    Finally, as an aside during the work of the touch screen, multi touch does not work.  Do I have reason to assume that it is a hardware problem?

    Thank you Tim

    I have the same problem on a tx1340ea.

    After that I extracted sp38171.exe ran setup.exe in Windows XP (SP2) compatibility mode, and it works very well.

  • Pavilion dv5 1002nr portable p: Customize the dvd launch button

    does anyone know how to customize the DVD button. Before I reinstalled the operating system the person was the custom button to open a game. I can't find anything in the control panel to change. I tried using QuickPlay button remapper program but it does not work. I can't find another thing that helps online.

    Thank you

    Hello

    You can re - map key as follows.

    Hold down the Windows key and press R.

    In the Run dialog box, type regedit and press ENTER.

    Click Ok to the uac prompt.

    Navigate to the following location.

    Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett-Packard HP Quick Launch buttons

    Find the key QAction

    You must change the path to the executable file in the left pane that you want to run when the button is pressed - for example to launch a program called 'Play' a the example path is C:\Program Files\Game Folder\Game.exe

    Once this is done, you will need restart the laptop until the changes take effect.

    Kind regards

    DP - K

Maybe you are looking for