Launch of the MenuItem Application

Similar Questions

• Error launching of the ' LabVIEW.Application [error Code:-18001]

  Hello
  I have a TS 3.4 mind sequence LabView 8.21 - Teststeps.
  The sequence is called from a Labview-OperatorInterface.
  In a step that run 100 times before without problem I receive all of a sudden the error message:

  ErrorMessage: Error running substep 'run '. Unable to launch the "LabVIEW.Application" ActiveX automation server [error Code:-18001]

  After a restart of the software al NOR-everything works normally again.
  What is this error, and what should I do with it?
  Should I ignore the error and try to execute the step again or not this average tht the ActiveX server has been lost forever?
  How can this problem occur?

  Thanks for your help

  
  

• How to check if the menuitem application has already added to the application menu?

  Hi all

  I want to insert some menutime at the request of RIM, for example,

  I have create a new menuitem Application named customizedMenuitem and add it to the request Message RIM.

  Since then, each time when my application is started, it will add again.

  So I want to check if it has already been added, if so, ignore to add it. If this isn't the case, application adds one more time.

  I called removemenuitem before system.exit (0) when quiting my request, however, it doesn't seem to work.

  That's why I check menuitem before I add.

  Source code like this,

  Constructor()

  {

  Super();

  If (the _appMenuitem is not added to the RIM Application) {}

  create a new menuitem application

  ApplicationMenuItemRepostory.addMenuItem (int, applicationmenuitem)

  }

  }

  Any word would be much appreciated!

  Thanks in advance!

  The most common way to deal with this is to store a value in the store of Runtime.  Your application can save a value when it adds the ApplicationMenuItem, and then check to see if it is there when it is run a second time.

  The Runtime store is erased when the BlackBerry is reset, which would coincide with the ApplicationMenuItem being deleted.

• How to reduce the size of the menuitem Application using the programming...

  Hi all

  Help me please

  If my BlackBerry device with the font size is 14(max_system_font).and then I run my application, the menu items stop looking very strange, that the font size is so great. Throughout the application, I set the font size. but unable to reduce or to set the font size of the menuitems.

  Please can someone suggest me, how to fix the font menuitem size in my application.so she gets not the size of the police system fron any effect.

  Ashutosh

  I searched a lot. but did not get any solution.

• When I click the iconI GET a message that the firefox application cannot be launched 10661

  I click the icon in the dock and I get a message that says that the firefox application cannot be launched 10661

  Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third part of Firefox 4 version that works under OS X 10.4/10.5 and PPC Macs, for details, see http://www.floodgap.com/software/tenfourfox

  If you prefer, you can get the latest version of Firefox 3.6 http://www.mozilla.com/en-US/firefox/all-older.html

  Mozilla is working to keep Mac users with non-compliant systems to enter the notification on Firefox 4 and also do not display the button 'Download Firefox 4' on http://www.mozilla.com

• a sentence installed updated software, "OSx recovery software update" and the overview application still refuses to work however I try to launch it. He started and left immediately after recovery immediately, she leaves, she shows also a no document error

  I just installed new updates of software, "OSx recovery software update" and the Preview app still refuses to work, however I try to launch it. He launched and immediately closed unexpectedly after unexpectedly WARNING recovery he immediately left again, it also shows a notice of error document

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Launching the Maps application from the browser

  I'm currently building in a small web application the ability to launch native maps app.

  This is a normal site, will be displayed in the browser, not a WebWorks app.

  It is pretty...

  blackberry.launch.newMap ({address: {/ *... * /}});

  but of course this does not (blackberry is not set).

  All the posts I found on this topic are several years old (and inconclusive to whom).

  So... what I can or can't I trigger the native application of maps of in the Blackberry browser?

  I am on OS 10.3.

  Hello

  You can open maps to your application via a link href like this: find us

  EINFO mor on the "geo" uri: http://en.wikipedia.org/wiki/Geo_URI

• Lexmark X 1130 gives me this error at the launch of the application: Application LXBKaiox.exe error.

  1. Lexmark X 1130 gives me this error at the launch of the application: error LXBKaiox.exe - Application, the application could not start correctly (0xc000007b). Click OK to close the application.
  2. What can I do?

  It is perhaps because Lexmark have not released a driver for Windows 7 for this printer:-

  http://support.Lexmark.com/index?ProductCode=LEXMARK_X1130&page=product&locale=en&UserLocale=en_AU#1

  There is a work around: -.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/a8cf7720-3259-4baf-b9dc-12c2d3ba9b19

  The printer still works under Windows 7, or you have just tried to install it?

• Mfc100.dll of error missing at the launch of the application

  I installed a program in Windows 7 Professional.  executable file was built using visual studio 2010 in windows xp environment. After you install this Setup program in windows 7 then I try to run the application error message indicates "missing mfc100.dll with the launch of the application". Then I installed "Microsoft Visual C++ 2010 Redistributable Package vcredist_x86.exe" but no luck. This time not shown but error message by double-clicking the exe or run as administrator could not start the program. Also tried copying the dll files in the exe directory.
  Also tried regsvr32 mfc100.dll in the command prompt. This time, the error message is "mfc100.dll was loaded, but the DllRegisterServer entry point was not found"

  Hello

  The issue you described would be better served in the MSDN forums.

  These are two specific forums because I think that you have two different issues:

  http://social.msdn.Microsoft.com/forums/en-IE/category/VisualStudio

  http://social.msdn.Microsoft.com/forums/en-IE/category/vsdbg

  I hope this helps.

• InDesign only will launch properly through the creative application of Cloud

  Windows 10, InDesign CC 2015.4.

  I was happily using InDesign yesterday and is working on a large file from a remote server. All idle so an analysis it was unusable and I started having funny behaviours, such as not being able to select things. I finished by force he leave via the Task Manager. Since then, every time it loads, it will access interface but then freeze: do not click on menus, the window does not respond: just frozen (However the window never come with "No answer" as you would expect). Only way is to kill him via the Task Manager.

  A ctrl + alt + shift reboot several times, not good. Finally, I uninstalled, then reinstalled. Same thing. Abandoned during the day and I am now at home. Tried to uninstall and reinstall again and again the same thing. However, because I had the creative application cloud opening instead I clicked "Open" app. It opens up very well and I was able to work. Quit smoking, has launched from the taskbar, recent applications and by double-clicking InDesign.exe (all three are essentially the same thing) and I get a window does not respond. Open again via the app and no problem.

  Tried starting secure, and it works little matter how I try to launch it.

  Booted up normally again, no dice. I disconnected (e) Creative cloud before embarking to see what would happen. Launched inDesign and he has popped up with the Application Manager asking me to connect. Has done this, then the Application Manager stops on "wait a moment" with the spinning wheel indefinitely until the window had finally "not responding" in the title bar. Had to kill with task again Manager.

  So, can someone help me out here? Only other thing I can think is to uninstall all apps CC then the Manager app CC itself, but all my other apps seem to well (well, Illustrator and Photoshop are, in any case).

  I managed to do remove my recently given admin rights. Restarted, and CC apps seem to work fine now. Why this should affect things, I don't know. However, I enjoy once more being able to navigate to an InDesign file, double-click it and opened it.

• I have an annual account CC allowing access following applications - all right until AI launches. The CC window asking me to renew my subscription - subscription I have. PS and to launch etc. - all, but have. Clues? Thank you

  I have an annual account CC allowing access following applications - all right until AI launches. The CC window asking me to renew my subscription - subscription I have. PS and to launch etc. - all, but have. Clues? Thank you.

  Hello

  Please follow the steps here: https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-help.html

  https://helpx.Adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Let us know if this helps!

• After installing Acrobat or Reader on Windows 7 or Vista, icons of applications and file types change in Acrobat/Reader icon. Double click on a file or icon launches Acrobat or Reader. (The native application associated with the file type is not ope

  After installing Acrobat or Reader on Windows 7 or Vista, icons of applications and file types change in Acrobat/Reader icon. Double click on a file or icon launches Acrobat or Reader. (The native application associated with the file type is not open.)

  Hi peterb53490660,

  Try the steps of troubleshooting mentioned in this KB doc. https://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acrobat.html

  Kind regards
  Nicos

• When I try to open a JPEG file in Adobe Bridge I get the following message: "the original application of the bridge is not active.  "Bridge that requires a product calling it launched at least once to activate this feature.  What should I do to fix this

  When I try to open a JPEG file in Adobe Bridge I get the following message: "the original application of the bridge is not active.  "Bridge that requires a product calling it launched at least once to activate this feature.  What should I do for this problem to be able to open JPEGs in Adobe Bridge?

  Open Photoshop first... or any program that you bought that included bridge

• I need help for Lightroom CC for the launch of the creative cloud. 5 Lightroom always throws, but Lightroom CC only run my applications folder. I use a MacBook Pro of the retina Yosemite running. Also 6 CS PS does not refresh.

  I've deleted and reinstalled creative cloud and all my applications. I upgraded from LR LR CC 5 but LR CC doesn't launch since the launch of office about LR 5 CC CC Desktop App, but also PS CC & PS 14 CC. LR CC will launch only in my applications folder. I can not also updated PS CS6. My desktop CC app had a '1' next to the icon for so long and this is an update for PS CS6 but it still fails. I uninstalled and reinstalled all the apps again, but he is not always up to date. I even opened CS6 PS in my applications folder and tried to update there, but still, it would not work and gave me the error:

  13.1.2 for cloud creative Photoshop

  Failed installation. Error code: U44M1P7

  
  

  Has anyone seen these before or have any idea how to fix? I don't understand why LR CC does not work since the creative application of Cloud toolbar when running my applications folder. I never had problems with an update before, but I tried to update Photoshop CS 6 for more than a month and nothing works.

  
  

  Thanks in advance to anyone who tries to help him.

  
  

  John

  [email protected]

  U44... Update error http://forums.adobe.com/thread/1289956 can help

  -U44 more... discussion http://forums.adobe.com/thread/1275963

  -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

  - and a Java update https://forums.adobe.com/thread/1507936

  -Update may break things https://forums.adobe.com/thread/1772260

  -http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/

  -https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

• Don't launch the CS5 applications

  I restored an iMac from a Time Machine backup, and now CS5 applications will not launch. The serial numbers on Adobe.com for this product ar not accepted by the installer, telling me it is invalid. How can I solve this?

  disable, uninstall, run the vacuum cleaner, then reinstall.  Here are the details - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html