Satellite 2410-303 does not illuminate

Similar Questions

• Satellite Pro C660 does not illuminate

  Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

  any suggestions?

  Hello

  On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
  After doing this connect the power running and try to start again.

  What happens when you do this?

• Satellite M30X-127 does not illuminate

  Hello

  Need help!
  My satellite M30X 127 does not illuminate. When I push the power button, it is DIRECTED in turn. But nothing comes on the screen. There is no sound and the fan does not start. I took it to a repair center and they told me the motherboard is fried and it will cost me 400 pounds to fix.
  The guy there offered my 100 pounds for to buy me.
  Please a little help. What should I do?

  Hello

  Otherwise you will search in ebay for the second hand with the good motherboard unit.
  Sometimes people sell books with the failure to display or other parts of damage, but the motherboard is ok.
  You can try to use second hand motherboard in your laptop.

• Satellite 2410-303 will not read the product recovery CD

  My satellite 2410-303 will not read my product recovery CD.
  When I turned off my pc with the drive in, I get messages saying that the disk is not formatted correctly.

  Hello

  It of weird, is your CD the other disc drive? Have you tried to read your cd of restoration with another computer? If the same error occurs on another computer system, then the cd is probably defective.

  Just a question: I guess you want to recover your machine, Don t you?

  See you soon

• Satellite 2410-s205 does not supply power to the top

  Hello everyone, I have a Toshiba Satellite 2410-s205 and it has installed windows xp home. It started to freeze and go slowly. Then I ran adaware and clean it. I installed spybot s & d and after update adware programs I tried to restart the computer and it froze. I shut it down using the power button, but now it does not restart.

  When you press the power button, there is no fan activity, only on dvd rom light and goes back to the wide. Does anyone have an idea on what I can verify. Memory, Cpu, etc or what could be the problem.

  The battery has a full charge, more I plugged it. The led does not illuminate when you press the power button.

  Thank you.
  Matrix733

  Hello

  Well well, without testing the laptop it of not possible to give you an answer exactly.
  It of needed to check the laptop only computer parts (memory, CPU).
  But it's not easy to verify no additional experience.
  In my opinion the best way is to contact the ASP. It of the best way to locate the fault.

• Satellite L500-1DT does not illuminate

  My laptop does not illuminate unless the switch the off market cable is disconnected and the connections are bridge on the motherboard. Any suggestions please?

  You start your mobile phone if the battery is removed and the laptop connected to the power supply current only?

• LED light for Wi - Fi on Satellite L40 - 14F does not illuminate

  Is he someone correct the problem with LED light for Wi - Fi on L40 - 14F?

  What do you think average is by any fix for the WLan light

  Are sure you that you have enabled the WLan switch on the side of the laptop?
  Only this switch controls the WLan light!

  If the WLAN led does not illuminate after that you have activated the WLan switch there is something wrong with the hardware.

  then if there is something wrong with the hardware of notebooks is needed the help of ASP.

• Satellite 2410-504 does not start

  Hi all

  I have a laptop toshiba Satellite 2410-504 sick.

  When to start he says: -.

  "Windows was not start because the following file is missing or corrupt: \system32\ntoskrnl.exe.
  Please reinstall a copy of the above file. »

  Ive put the Windows CD in the CD player and I went into the BIOS and select CD-ROM as the first priority but it fails to boot from the CD and everything continues (which is) at the start of the HD.

  When I changed the priority of WOOD he came with a

  PXE - E61: Media test failure, check cable of

  So after reading this error message I have check the HD is installed and disabled net card in the BIOS but when even does not start and returns the error message as above.

  Any other ideas? Is the broken HD?

  Why it wont boot from CD?

  TIA
  Yuppski

  HARD drive is recognized in the BIOS?

  I can't say for sure, but somehow I think the HARD drive's troublemaker.
  When you do all this is some odd reaction? STRANGE begins to read the disc in Windows?

• SATELLITE S1410-303 DOES NOT START

  Sorry I realize that this is unrelated to the issue at hand, but I cannot find anywhere the link that allows you to create your own topic.

  My mother has a Satellite S1410-303. Under XP, SP2.

  The machine won't start at all, and does not for months, when I come back today and it works, the first thing he greeted me with a message.

  Bad RTC battery *.
  Bad checksum (CMOS) *.
  check the system. Then press the [F1] key

  Since then, I pressed F1, asked for the machine return all settings by default (although there is no change). Since then, the machine performs a loop between:

  -commissioning > go to the windows XP page > then restarting.

  In the current state it has nothing of real value on the machine that I couldn't lose. If id be happy to wipe everything.

  -Is this serious problem or could it be resolve quite easily by wiping the thing?

  -If this is the best method, how should I do for wiping?

  Thanks for your time people.

  Hi Luke,.

  Messages you get are caused by the battery CMOS on your main map from the apartment. The CMOS battery is rechargeable and will be charged by connecting the laptop adapter, but no turn on/off the laptop. Leave it like that for 12 to 24 hours and then the CMOS battery should be fully charged.

  The CMOS battery is used to keep the BIOS settings when the laptop is turned off and since then this has now gone flat it is likely that the BIOS information has been lost, even if a default configuration will always be available. I recommend that once you have reloaded the CMOS battery, you try to start Notepad as usual, but switch (ESC + F1) BIOS Setup screen and check your BIOS settings.

  HTH

• Satellite Pro M40X does not ILLUMINATE

  Hi. -.

  I have a M40X Pro Satellite that I bought 4 years ago. It works well until a few weeks ago.

  I tried to turn it on but nothing happen, nothing, no lights, no sound at all, completely dead.

  It is connected to the power supply and the power light is on, (the battery light does not work since there is a lot of time). I tried to remove the battery, unplug the power cable and after several hours or even days, try to turn it on and I got the same behavior.

  Only power if it is (the power light when you connect the AC power) but when I press the button "turn on" the laptop, nothing happens.

  My laptop isn't under warranty, so if someone could help find a solution that would be great!

  Thank you

  Hello

  I have read your problem related to the failure of hardware. It seems that the motherboard is dead, no doubt, the southbridge. In any case, you should contact the service center:

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

  Note that the motherboard is one of the most expensive parts of the tower and don't know if it's worthy to replace, it is better to buy a used or a new laptop.

• Satellite Pro A60 does not illuminate

  When I try to boot my Toshiba Satellite Pro A60, seems to be powered. A few seconds later, there is a click and it cuts.

  I tried to turn on the computer with just the power supply with the battery removed, just with no power supply and battery and power, but none of these options are making a difference.

  I also tried to clean the fan in the aspirant from the outside by a suction pipe, but even once, it did not help.
  Can help you with the Please this problem?
  Thank you.

  Hello

  Turn the laptop over and unscrew the cover on the ram. Then remove the ram and try to turn it on again. If it lights, put the piston inside the laptop and try again. It does not turn on? Then your ram is dead. If yes then you can replace, or have your asp replace it. If this does not resolve the problem, there is a small plastic cover that runs along the keyboard just above the keyboard. Take this off and then unscrew the fixing screws to the bottom of the keyboard. Under the keyboard, you may have a second RAM slot. If Yes, try to remove the RAM stick and turn. It work? If this isn't the case, you probably have a problem with the motherboard. If it lights fine, then you have found the issue and can replace or continue using it without the extra RAM. Hope this helps and have a nice day.

• Satellite Pro L300 does not illuminate

  Hi all, I'm new to this forum.

  I have a Toshiba Satellite Pro L300 and I've had it for about 2 years.
  But yesterday I closed the laptop as usual. But later I went back to it and tried to turn it on. But it does not work. Instead, when I press the power button the LED next to the battery symbol flashes orange/orange 6 times and then turns off.

  Can someone tell me what it is? I tried to let it load, but that has not worked. The amber light is the only light that flashes. It does not recognize that I plugged in the charger and I don't think that the battery was flat. So I'm angry and helpless right now.

  Can someone help me please?

  See you soon.

  Hello

  There are several indicators;
  DC, while running, the main battery, LED HDD/ODD.
  So I guess the power LED flashes in orange. Right?
  This means that something was wrong on the motherboard.
  Maybe power supply electronic malfunctions

  In this case, there is no much to do only mobo replacement could help to...

• Satellite Pro L20 does not illuminate

  Hope you can help. We have a 5 years satellite pro L20 who never gave a lot of days. It runs from Win XP, had an upgrade (crucial) memory to 2 GB and a new battery 4 years ago 4 years ago. 2 days ago, he simply left with the same noise you get when force a shutdown by holding the power button down. I tried to boot with no battery, just the sector and only on a charged battery. All to nothing does not.

  I then read the button of power with the battery and removed sector I did after leaving it overnight. When I replaced the battery it started as usual and lasted 30 seconds before turning off again, and then he was dead. I have tried all combinations with the ram up to 1 stick or kidnapped and attempted to get the bios with the HDD outside as well. Still nothing.

  I noticed that when I put the battery in 2 of the 3 flashes briefly, and now the button of pwer while pushing the battery causes a brief start 4 seconds.

  Any ideas as to what this may be? I suspect that the hardware and software. Also, I tried a different power adapter, once again no results. It stays just off.

  Thanks for any help...

  Hello

  I'm afraid it looks like a serious m hardware problem
  My first idea was a malfunction of the RAM in such a case, you could replace and test the memory, but it seems that you have already tried

  In my view there s something wrong with a motherboard or a part on the motherboard :(
  In this case I n t think a replacement of the motherboard would be useful since this part is very expensive

• The Satellite A200 display does not illuminate after being idle for 15 minutes!

  Hello!

  I just bought a Satellite A200 1 - AX PSA6 and install Windows XP SP2 + upgrade of bios for winxp.
  After 15 minutes of unactivirty (no not pressing the keys or moving the mouse), I set in power options in Control Panel - what must power OFF display.
  After this time display is switched off (black)!

  But I can't wake up my laptop!
  I'm press any key or move the mouse, but the screen is always black!
  But laptop works!
  I can ping and then by network or remote access connection.

  One way to solve this problem:
  Laptop open and close!
  A200 - "standby mode" and wake up with swithches on screen...

  Hello

  It seems that Windows XP Home edition does not work perfectly on the new laptops designed Vista. Before you live your laptop try to change profile settings (extended battery) power and test the parameters of this profile.
  Tomorrow I'll try to install Windows XP Home on my A200 and I'm really interesting if I even notice.

• Satellite 2410-504 does not start after you remove RAM module

  Hello

  I need assistance or advice.

  I have a portable Satellite 2410-504 and I was looking for to increase the memory, I am a Novice with computers, I decided to remove the Module that is already in place (to see if I was capable of employment)

  After removing and then returning the Module, then I went to turn on the laptop and Yes you guessed it, NOTHING!
  The power lights are on and the light comes on but the screen is blank and there are no hard disk activity.

  Now, trying to get back on my actions, I have been unable to completely remove the battery but I'm sure that he slipped on the connectors.
  Could I have caused permanent damage or are my actions retreivable.

  Thanks in advance,

  Mike-c

  Hello

  Did you check if the RAM has been inserted correctly?
  Select this check box.
  But of course, the RAM could be damage due to wrong treatment nothing is impossible
  My computer laptop didn t start because one of the RAM died suddenly.

  What you could do is to remove the battery and unplug the AC adapter.
  Then you have to wait a little (one hour) and need to connect the two parts again.
  Then try turning on the laptop computer.