Launch the Workstation mode toggle

Similar Questions

• Launch the workstation auto run ubuntu + vm load

  Lets start by saying that I have a pc with an Ubuntu 12.04 host OS. I installed VMware Workstation on it, and I put windows 7 as a virtual machine inside the workstation.

  My question is possible to press the power button and it loads to ubuntu (autologon) to have Vmware workstation auto start towards the top and then auto start my virtual machine to windows 7 in full screen. (I already have when I turn on the windows 7 VM than full screens.)

  Thanks in advance.

  He was happy. You are better to include the full path in quotation marks, (that's what I mean :), not only a part of it):

  "/ usr/bin/vmrun start" "/home/administrator/vmware/Windows 7 x 64/Windows7x64.vmx"" "

• Why the GET Media Hub launched in offline mode each time that I connect to my VPN company?

  I just installed my Media Hub and am very happy to have it on my home network.  However, every time I connect to my VPN company at work (I work from home all day, every day), he launched the offline media pole.  It reconnects as soon as I hang up the VPN.

  I had other problems with VPN network, such as my * wireless * the printer works not when I am connected to the VPN (HE says it's to prevent the unauthorized access to our internal network).  But it is with a wireless device.  The Media Hub is physically connected via an Ethernet cable, not wireless, so I do not understand why he should have a problem with my VPN.

  Everyone is heading in the same situation?  Solutions/solutions/suggestions?

  Thank you!!

  It's real simple's happening at neworks using VPN Corp.  It deals with security and once you understand that it makes it simple.  Without VPN, you are conencted to your home network.  Call the NetA.  All NetA devices are in the same area code (simple analigy).  Then the PC know how contact on the network of companies IE NetA. OK, connect us to a corp network called NetB.  At this point, all codes of areo change toward a new area code to NetB.  The PC is no longer connected to NetA.  It is a Tunnel. The tunnel goes from your PC via your router to the network Corp and stops there. No connectivity to anything except the PC and the net Corp.  So you lose connectivity to any device on NetA.  Now you are conencted to a different area code.  Once that disconnect from NetB, your connection is restored to NetA.  Just like your experience.  Corp this person not the NetA to NetB connect.  I hope this helps.

• How to run mozilla in windows 8 windows mode because mode 8 is faster then the desktop mode?

  one last thing, I work in developer edition please give me comment about how do to use it. I want to launch firefox windows8 mode.

  Hello shubhamcr7, firefox is available in desktop mode only. There has been development of metro once but she stopped earlier this year because of the low interest of users: https://blog.mozilla.org/futurereleases/2014/03/14/metro/

• NB - 200 can not handle the compatibility mode for HDD Contoller...

  Hello everyone!
  I would like to make it work on my nb 200 ubuntu 10.04 netbook edition netbook. The installation is done, grub works very well (I kept windows xp and have dualboot grub-controlled). Of course, I asked first in the ubuntu forum to solve my problems. I thought it was done, but in fact it wasn't. See the ubuntu forum for more information: http://ubuntuforums.org/showpost.php?p=9346966&postcount=1
  Switch mode Compatible HARD disk (in bios) controller works great for ubuntu, but Windows XP have problems. XP is launched (I see the Welcome screen), but then the computer restarts. I updated the Bios to version 1.9 (02/2010), but this does not solve my problem.
  In the threat of ubuntu, a help very kin (darkod) says:
  + You can try, but if changing the controller type makes a difference, I'm not sure this will help. This seems not related to ubuntu. +
  + I'm surprised change compatible controller made XP no boot. If a hard drive is sata, you, instead, compatibility mode is required to even install XP because it does not include inside SATA drivers. +
  + I guess it depends how the manufacturer put the netbook. +

  Thanks in advance for your help.

  I tested the functionality of Windows XP Home edition on my Satellite with AHCI mode and if the WXP was preinstalled with the SATA mode enabled it will not work when the mode is replaced by the compatibility option. I get the blue screen every time if I want to start Windows XP Home edition.

  I think that you do need to make the decision. If you want to use both operating systems, I think you should change the AHCI mode to compatibility and reinstall Linux and Windows XP Home edition.
  Then it works well, but you will not have full disk under Windows XP Home edition as performance when you use the SATA mode.

• Satellite Pro L300 - Dual boot with the AHCI mode

  Type of product > Notebook
  Family > Satellite Pro
  Product series > Satellite Pro L series
  Model > Satellite Pro L300 24L
  Model short-term > PSLB9E

  Hello.

  XP and Seven is installed in dual-boot on my laptop and I use EasyBCD to choose which system I want to start.

  To start XP, I need to enable "Compatibility" (Controller SATA in BIOS mode) and seven is "AHCI" must be activated.

  Is there a way for my two OS was started without making changes in the bios?
  Y at - it an update to correct this problem (or alternative)?

  Thank you in advance.
  Marc

  Yes you can do it but I'm afraid, you must reinstall Windows XP Home edition m.
  Why? Because before beginning to install Windows XP Home edition, you must change it to AHCI mode, launch the installation of Windows XP Home edition and before you start you need to load the SATA driver (via F6 I think).

  Long time ago, we have discussed a lot about this on this forum then use the advanced search anc check options other postings on this subject.

  By the way: check http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm

• Is it possible to launch the media player 11 reduced to a minimum?

  Hello

  Is it possible to launch the media player 11 reduced to a minimum.

  Thank you

  Paul UK

  Hi ratchet.

  It is certainly possible to run Windows Media Player mini mode, to so, try the following steps

  · Click the Windows 'Start' menu, then click on "Windows Media Player" to launch the media player. Right click on any part of the Windows taskbar, and then point to "Toolbars."

  · Select "Windows Media Player." Click "Reduce" to start the media player in mini mode.

  · Right-click the task bar if you want to return to the default display. Select "Toolbars" and click on "Windows Media Player."

  In addition, please let me know the operating system you are using.

• MSE says that I have to run Defender in order to remove found threats. I can't launch the Defender, it keeps closing

  MSE says that I have to run Defender in order to remove found threats.  I can't launch the Defender, it keeps closing

  MSE says that I have to run Defender in order to remove found threats.  I can't launch the Defender, it keeps closing

  Suppose MSE wants that you run Windows Defender in offline mode (RDO), which is not the same as the defender of Windows that is installed on Win 7 and is disabled when MSE (and other anti-malware programs are installed.  Yes, it's very confusing.

  http://securitygarden.blogspot.com/2012/04/understanding-Microsoft-anti-malware.html

  In any case, see below for information about the RDO:

  You may need to use one or more of the following scanners in offline mode - you'll need to burn a CD using another computer and change the sequence of starting your computer to run the scan - instructions are provided with the links:

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  http://www.BitDefender.com/support/how-to-create-a-BitDefender-rescue-CD-627.html

  http://www.freedrweb.com/LiveCD/

  http://support.Kaspersky.com/viruses/RescueDisk?level=2

  I hope this helps...

• Error: Dragon Naturally Speaking seems to work in Compatibility Mode Windows, which can lead to errors. We recommend to disable the compatibility mode for the program natspeak

  Original title: Dragon Naturally Speaking will not charge. He was working. I have time. The only thing different is my 10 3 demo of windows expiredeinstalled

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Dragon Naturally Speaking does not load. He was working. I have time. The only thing different is my demo windows 10 expiredeinstalled 3 programs you have problems with
  • Error messages Dragon Naturally Speaking seems to work in Compatibility Mode Windows, which can lead to errors. We recommend to disable the compatibility mode for the program natspeak
  • Recent changes to your computer
  • What you have already tried to solve the problem I find no windows compatibility mode. I do not know how

  Hi jrskona,

  1. don't you make changes before the show?

  Try the following steps to disable the compatibility mode.
  a. Locate the launch of Dragon NaturallySpeaking file, right-click on it and click Properties.
  b. click on the Compatibility tab.
  c. in compatibility mode, uncheck the box "run this program in compatibility mode for".
  d. click ok to apply the changes.
  e. check if the problem persists.

  If the problem persists, then contact the program vendor support team:see Dragon NaturallySpeaking support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The computer hangs when connecting - if the workstation service is enabled.

  Original title: the computer crashes with workstation active service.

  I'm currently under Windows 7 Home Premium.

  I struggled to the login screen where you choose your user name and it says welcome, but nothing happens. Otherwise, my cursor will come back, but I can't do and ctrl-alt-del does not work either.

  I did safe mode, disabled services and isolated the problem to the workstation microsoft service. I understand that this workstation is essential for some components, such as connecting to a network drive, or a network printer.

  Now I have to work with workstation service disabled, and it's very inconvenient for my work. Is there a way around it?

  Thanks in advance.

  Hello

  Were there any changes or updates made on the computer before the show?

  Method 1:

  I suggest you run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  See also:

  The Microsoft Windows malicious software removal tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP

  http://support.Microsoft.com/?kbid=890830#FAQ

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:

  I suggest to create a new user account and check if the problem persists.

  Create a user profile.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the new user profile resolves the problem, you can screw the corrupted profile and re - install the applications and programs.

  Reference:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  See also:

  Windows Vista and Windows 7 black screen on computer unlock

  http://support.Microsoft.com/kb/2431700

• Turn off computer account in Active Directory will still allow the workstation to log

  I have a special scenario. A Windows 7 workstation was locking (pending of CTRL + ALT + DELETE) mode. Until I turned off the computer, the user account and the same account administrator, reset the password for this user and the workstation. My requirement is that the user cannot log on to the workstation again.

  However, the user can connect to the workstation.

  This parameter of register AD might lock the computer completely? or is there any GPO setting that could lock the computer?

  Thanks in advance.

  Pingala

  I suggest you send the request here:

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itprosecurity&filter=AllTypes&sort=lastpostdesc

• PROBLEM CONNECTING TO SQL 2008 EXPRESS WITH ASP CLASSIC BETWEEN THE WORKSTATIONS ON A PRIVATE NETWORK

  I have created a private network (no internet connection) of four workstations, each running a SQL Express 2008 installation.  All four laptops are running Windows 7 Professional.  I created a homegroup for this private network.  While I don't care sharing of files between the four workstations, I have three of them in order to connect to the SQL 2008 Express database on the fourth mobile through channels of connection in the classic ASP programs.  Each of the four laptops can see others in the network.  I can ping the ip addresses of each to the other without any problem.  When I try to launch the ASP program on three laptop computers that attempt to connect to the SQL database on the fourth, I get the server does not exist or don't access denied error '80004005'.  The same program can also run on the fourth laptop and connects to the SQL database with no problems.  I tried to use SQLOLEDB and SQLNCLI10 provider in the chain of connection on the other three.  This operation fails.  I tried to add the IP address of the computer hosting the database as a Data Source in the connection on the other three string and still fails.  Named pipes and TCP/IP are enabled.  Each laptop can connect to the instance of SQLEXPRESS executed on each, but I need three to be able to connect to the instance of SQL Express running on the fourth.  Any ideas what I can do wrong?  This connection string works fine in the ASP program to connect to the local database on each laptop:

  Connection.Open "PROVIDER = SQLOLEDB; Server = computername\sqlexpress; UID = MyUser; PWD = MyUserPassword; DATABASE = MyDatabase ".

  Nothing seems to work for the chain of connection than the other three laptops to do to connect to this database on the fourth laptop.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Launch the application from a url in the browser for BlackBerry?

  I'm developing an application where I will launch a url in the browser where I run my application.

  Suppose if I click google.com , and then press enter, it will launch my app. For this, I tried with the HttpFilterRegistry API.

  For reference, I use the HTTPFilterDemo application. But currently while launching the application, I get the NullPointerException .

  I wrote the code below I have the openFilter method:

    public Connection openFilter( String name, int mode, boolean timeouts ) throws IOException
      {
          Logger.out("Protocol", "it is inside the openFilter method");
          _url = name.substring(2);
          _requestHeaders = new HttpHeaders();
          _responseHeaders = new HttpHeaders();
          _responseHeaders.setProperty(HttpProtocolConstants.HEADER_CONTENT_TYPE, "text/html");
  
          // Attempt to parse for the file name
          int slashIndex = name.indexOf('/', 2);
     if (_resultData == null)
          {
  
  final int modHandle = CodeModuleManager.getModuleHandle("AppLaunchBrowser");
                      Logger.out("Protocol", "here is the module handle:::" +modHandle);
                      final ApplicationDescriptor[] apDes = CodeModuleManager.getApplicationDescriptors(modHandle);
  //                  final String[] arguments = new String[1];
                      final ApplicationDescriptor appDescriptor = new ApplicationDescriptor(apDes[0], new String[]{});
                      Logger.out("Protocol", "here is the app descriptor:::" +appDescriptor);
                      try {
                          final int appCode = ApplicationManager.getApplicationManager().runApplication(appDescriptor, true);
                          Logger.out("Protocol", "here is the app code:::" +appCode);
                      } catch (ApplicationManagerException e) {
                          // TODO Auto-generated catch block
                          e.printStackTrace();
                      }
       }
          return this;
      }
  

  And I am creating alternative entry point in the application class and using as below:

  public class AppLaunch extends UiApplication{
      public static void main(String args[])
      {
          Logger.out("AppLaunch", args+"length of the arguments::::" +args.length);
          if((args != null) && (args.length > 0) && (args[0].equals("background")))
          {
              Logger.out("AppLaunch", "in the alternate entry point");
  //          Logger.out("AppLaunch", args+"length of the arguments::::" +args.length);
              HttpFilterRegistry.registerFilter("www.google.co.in", "com.innominds.ca", false);
  
          }
          else
          {
              Logger.out("AppLaunch", "Inside the Applaunch");
              AppLaunch theApp = new AppLaunch();
              theApp.requestForeground();
              Logger.out("AppLaunch", "created the app launch object");
              theApp.enterEventDispatcher();
  //          Logger.out("AppLaunch", "in the alternate entry point");
  //          HttpFilterRegistry.registerFilter("www.google.co.in", "com.innominds.ca", false);
          }
      }
  
      public AppLaunch()
      {
          checkPermissions();
          showTestScreen();
      }
  
       /**
       * This method showcases the ability to check the current permissions for
       * the application. If the permissions are insufficient, the user will be
       * prompted to increase the level of permissions. You may want to restrict
       * permissions for the ApplicationPermissionsDemo.cod module beforehand in
       * order to demonstrate this sample effectively. This can be done in
       * Options/Advanced Options/Applications/(menu)Modules.Highlight
       * 'ApplicationPermissionsDemo' in the Modules list and select 'Edit
       * Permissions' from the menu.
       */
      private void checkPermissions()
      {
  
          ApplicationPermissionsManager apm = ApplicationPermissionsManager.getInstance();
          ApplicationPermissions original = apm.getApplicationPermissions();
  
          if(original.getPermission(ApplicationPermissions.PERMISSION_BROWSER_FILTER) == ApplicationPermissions.VALUE_ALLOW)
          {
              // All of the necessary permissions are currently available
              return;
          }
  
          ApplicationPermissions permRequest = new ApplicationPermissions();
          permRequest.addPermission(ApplicationPermissions.PERMISSION_BROWSER_FILTER);
  
          boolean acceptance = ApplicationPermissionsManager.getInstance().invokePermissionsRequest(permRequest);
  
          if(acceptance)
          {
              // User has accepted all of the permissions
              return;
          }
          else
          {
  
          }
      }
  
      /**
       * Shows the test screen to allow the user to exercise the application
       * permissions capabilities.
       */
      private void showTestScreen()
      {
          UiApplication.getUiApplication().pushScreen(new AppLaunchScreen());
      }
  }
  

  can someone please help... Sorry for the almost total code display...

  I was finally able to solve this problem. NPE is to come in other methods of recall because I'm implementation of the FilterBaseInterface.

• Can not find a way to launch the program (Adobe Photoshop 4, 0LE) on the network.

  Original title: Windows 3.x apps Windows 7 migration

  I have a hard drive of a computer that ran the XP - Pro SP3.  He got the full operating system, as well as my documents, and quite a few requests in this regard, I would like to use.  The drive is now in one of these cases speedboat that allows to make it transportable.   Now, I received a somewhat newer, faster PC running Windows 7 Home, and I mounted the HARD drive and domestic system-7 on my network.    I can open the HARD drive.

  I have a request, old Adobe Photoshop 4, 0LE, that does what I need on the network HARD drive.   I have the original disc and the serial number.   I can't understand how to launch the program on the network.

  I prefer to install the application on the new machine directly from the CD, but I don't get an auto-run switch that allows me to install.   I can read all the files on the disk; and I can find (7) at the command line prompt, but I forgot my ms - dos and can't remember to install or execute commands.  I can't find a switch 'install new software' as I'm used to. just a switch 'uninstall '.  This is not convenient.

  So: can I install my drive to source original CD on my 7 newish machine app?  Or can I run it 7 on my outboard HDD network?

  Any help will be greatly appreciated.

  .

  4 Photoshop is old and is not compatible with recent versions of Windows. Its installer is 16 bit, so may not work on 64-bit Windows.

  If you have Windows 7 Professional or higher you could use XP Mode and install PS4 in that or use http://technet.microsoft.com/en-gb/sysinternals/ee656415.aspx.

  You might install VirtualBox and try https://www.virtualbox.org/wiki/Migrate_Windows .

  There's always the GIMP- http://www.gimp.org/, or you could buy Photoshop Elements.

• Binary translation is incompatible with the long mode on this platform. Windows 7, processor intel core i5

  I install VMware Workstation 12.1.1 Player for Windows 64-bit operating systems on Lenovo intel core i5 Windows 7.

  I have a copy of VM for HP Quality Center with the VirXPSP3.vmx file and the environment.

  When I try to open the Workstation Player vmx file:

  (1) I got prompt that machine virtual seem to be an option to take possession and use

  2) after taking possession, I try to play the virtual machine, I got a prompt with "binary translation is incompatible with the long mode on this platform. Long mod will be disabled in the virtual environment and application requiring long mode does not work correctly as well. See http://vmware.com/info?id=152 for more details. »

  Link is on this page: system required to install an operating system 64-bit on a 32-bit host (1003945) client. VMware KB

  Host is definitely 64 so I'm puzzled with this is the case.

  (3) next step/guest is: "this virtual machine may have been moved or copied. I clicked on the button "I copied it".

  (4) the following message:

  Fatal error VMware Player: (mks)

  Exception 0xc0000005 (access violation) occurred.

  Log file is attached.

  Line 476 in the log file is:

  The following features of VT - x are necessary for the support of VT - x in VMware Player; However, these features are not available on this server:

  2016 06-07 T 13: 51:34.466 - 07:00 | VMX | I125: hostCpuFeatures = 0x217d

  In one of the previous installation, I did virtual Intel technology enabled in the BIOS after one of the responses of your forum. It has not removed the error.

  Just to clarify whenever I have uninstall I'm your site troubleshooting steps:

  (1) Uninstall using Add/Remove program of the program and features

  (2) run the installer with clean / change

  I do above steps as an administrator and restart after each step.

  On top I have delete the following folders:

  C:\Program Files (x 86) folder \Common Files\VMware

  File C:\ProgramData\VMware

  File C:\Users\Ivana\AppData\Local\VMware

  Files C:\Users\Ivana\AppData\Local\CrashDumps\vmware-vmx.exe.*.dmp

  File C:\Users\Ivana\AppData\Local\Temp\vmware-Ivana

  File C:\Users\Ivana\AppData\Roaming\VMware

  And delete the folder with the Virtual Machine for HP Quality Center.

  Do you know how can I fix a fatal error (mks)?

  The same installation works fine on HP with Windows 7, i.e. copy of VM for HP Quality Center is ok.

  Thanks in advance for your help.

  Usually, this is caused by outdated or incompatible graphics drivers on your host.  I expect that the latest drivers for your integrated Intel HD Graphics 4000 would be probably already delivered through Windows Update, however.  Could be interesting to see if there is an optional update in your Windows Update list to get a new graphics driver.

  Otherwise, you can try the problem by disabling 3D graphic acceleration: from the VM menu, select settings..., and then in the list of material , choose display.  Clear (uncheck) the box 3D graphic acceleration .

  I hope this helps!

  --

  Darius