Layer of movement + all keyframes

Similar Questions

• Is it possible to move all the contents as a group in a flash document?

  I started creating a website in Flash and made a considerable amount of work when I realized that I needed everything I did move to a different location (above) in my document. I don't want to just start over and recreate all so I wonder if it is possible to move all (keyframe, groups, layers, all) together as a group to another location in the document? I need actually just my smaller document, but I need the space removed from the top of the document and not from below, so I can't just change document settings (because that will remove only pixels from the bottom)

  Is it possible to move all or remove the space from the top of the document?

  Any advice will be VERY useful! Thank you!

  What you might try is to copy everything in a movieclip and then move as needed.  By using the right click menu on the timeline, you can copy a whole chronology after selecting it and then paste it into an empty timeline.

• Move all items from carton to a layer in InDesign (AS)

  Just learning how to move all the guides to a layer, now I would like to just the products box to a layer. My goal is to separate the elements of page elements pastnoard on separate layers. Favorite AppleScript.

  It seems like it should be very simple, but I can't work as a (ID CS5, Mac OS x 10.6.8).

  If I select a point on the editing table and ask its parent, the result page is 'nothing. ' But asking you for each page element whose parent page has nothing (or 'nothing' or 'no' or 'nada' or "") returns no result.

  Can I ask for each item in the page which the parent page ID is the identification number of my single page, and you will find the item on this page (except the items in cardboard), but if I ask for each page element whose ID is NOT the ID of my page, it does not find the two points that I put on the editing table.

  Substances, can you get it actually works in JS?

  The only thing I've found so far and who works at all in AppleScript is a solution very kludgy:

  Tell application "Adobe InDesign CS5"

  Tell document 1

  each element of the page including the id of the parent page is greater than 1 the value myPageItems

  the value myEveryItem for each page element

  Repeat with myItem in myEveryItem

  If is not then myItem in myPageItems

  myItem move to the layer "layer of cardboard.

  end if

  end repeat

  tell the end

  tell the end

  That could take some time to run on a document with a lot of page elements. It is good to be a better way...!

• How to move all mailboxes to the new text layer?

  Hello

  So, we work with a book that will be printed in both languages. The color plates will be the same in both, with just the black plate text change. We should have implemented in a single document with color as the base layer and the two languages as two separate layers over the top, but we do not have. So now we have the design and to move all the items of text on a new layer. I do not know this should be easy enough for anyone who knows how the script, but I don't.

  Anyone know of any scripts for it? Any other ideas?

  I use ID CS3 on Mac.

  Any help would be appreciated.

  Yes, but it should work...

  var newLayer = app.activeDocument.layers.add ();

  TFS var =

  App

  .activeDocument

  .spreads.everyItem ().textFrames.everyItem () .getElements ();

  While (var tf = {tfs.pop ())}

  TF. Move (newLayer);

  }

  Substances

• Rename the file name background layer and move up

  I need a script that I can run at the end of an action to rename the name of the background layer and move it to the top of all the layers and hide visibility.

  That's what I want the layers of final document to look like, of course "filename" is the name of the file of the document itself. If I can change it to .jpg instead of a tif which would also be very useful.

  I use CC 2015 the more up-to-date version.

  

  I found these scripts that are not exactly what I need, but close and I can't understand how to manipulate.

  Script layer moves

  Open, do, and rename the layer "Julieanne Kost's Blog

  Update: now, I think that this may be totally useless. Because of this, I wanted the original filename.jpg was so I could export the image as an asset later on the road. I just tried to create the image assets and found that it creates a folder for each file, so if someone can think of a better way, awesome.  I was able to create action and move all my layers of setting down instead of trying to move the layer of file name up and it worked, but because each file name is different I can't select and hide in my action. There is a solution simple but do not do exactly what I need.

  Thank you!

  Brandi

  #target photoshop;
  app.bringToFront();
  if(documents.length){
  var doc = activeDocument;
  doc.activeLayer = doc.layers[doc.layers.length -1];
  if(doc.activeLayer.isBackgroundLayer){
      doc.activeLayer.name = decodeURI(doc.name).toString().replace(/\..+$/,'') + ".jpg";
      doc.activeLayer.move(doc.layers[0], ElementPlacement.PLACEBEFORE);
      doc.activeLayer.visible = false;
      }
  };
  

• Animation on Photoshop CS6: new layer appears on all images

  Hello

  I'm doing an animation on Photoshop CS6 and I have a problem that I can't solve:

  When I create new layer of United Nations pay to appear a new object in my animation, it appears on all the images Report, what I don't want in this case.

  I then have to come back on frame 1 and make the new invisible layer on this one, fortunately this then disables her on all the others and I can again move forward.

  I would like to find a solution pour does not have to do this manip' whenever I create a new layer s, makes me lose a lot of time... I tried with the elements of unifications layers, nothing seems to affect my problem...

  A solution to it must be?

  Help please!

  English:

  Hello

  I do an animation on Photoshop CS6 and I have a problem that I can't solve:

  When I create a new layer to bring up a new object in my animation, it appears on all the previous images, I'm not in this case.

  So I have to go back to the first image one disable the layer on it, fortunately it disable the layer on each following images and I can continue my work.

  I would like to find a solution not to do this procedure whenever I create a new layer, it makes me lose a lot of time... I've tried all the articles on the unification of the layers and none seem to affect my problem.

  There must be a solution?

  Help me please!

  (and I apologize if I made some English mistakes...)

  Uncheck the box 'new layer Visible in all managers' in the menu on the timeline.

  

• Move multiple keyframes

  I'm trying to move multiple keyframes on multiple layers simultaneously. If I select all the keyframes and all layers in the timeline panel it does move keyframes in either the first or the last frame of the movie. If I select all of stadium-same result according to the place where the playhead in the timeline panel. The animation is made of keyframes not INTERPOLATIONS.
  
  Essentially, I'm changing the graphics that make up an animation that spans 25 frames closer to the top of the scene to let more space without having to enter and pass each image individually.
  
  Or a chronology of "Blur" effect can be reversed without conversion of the blur effect in keyframes. It does not effect reverse in 'Edit timeline inverse Frames.
  
  Thanks for any help
  Erek

  There is a tool next to the "onion" tool called 'edit multiple images' that will solve your problems with the time to make a sandwich.

  HmcH

• iOS 10 mail app move all / trash all

  I just upgraded my iPad to iOS 10 2 Air.  It seems as if the move "all" and "trash all" feature has been removed from the mail application.  When I discovered one of my inboxes (I have the iCloud accounts and gmail), and tap edit, only 'Mark All' is enabled.  'Move' and 'Archive' (gmail) / "Basket" (iCloud) is both greyed out.

  In iOS all 9 (still installed on my iPhone), 'move' and 'Archives All' (gmail) / 'Trash All' (iCloud) are activated when I hit Edit in each Inbox.

  Apple has removed this feature in iOS 10 or changed the way it is implemented?

  I see the same question.  I have an email account that sends security updates.  I get hundreds of them, and I do not have ' t need all of read them.  In iOS 9, I was able to "trash all" of them.  No, I am on iOS 10 function disappeared.  Please bring back this feature

• Can I move all my photos in the iPhoto 6.0.6 version in my pictures (the road home) with OS x 10.6.8 folder?

  Hello.  I'm planning on upgrading to the Mavericks, but reading what iPhoto is not accessible with 10.9.  Is it possible to pass all my photos from this demand only my pictures folder?  I use iPhoto 6.0.6

  I see an option to 'Export', but don't know how to use, so I'm afraid to make a mistake and end up losing my photos.

  Also, I would like to move all the photo booth pictures (version 3.0.3) as well...

  I use older iMac 7.1 with 10.6.8.

  Thank you

  This is a very old version (such as the age of 10 years) of iPhoto, and no, it won't work on 10.9. You will have a problem as iPhoto is no longer developed or sold, and so you will not be able to get a version of iPhoto that does.

  There is no way that export can lose your files, but make a backup on don't forget.

  This trick of the user

  https://discussions.Apple.com/docs/doc-4921

  a details of the options in the export dialog.

• How to move all the already marked spam emails for spam folder?

  Some emails are marked alread wich spam (there is an icon burn above), but still in my main Inbox folder. How to move all folder of spam at a time?

  Have you tried to select e-mails, drag and drop on the trash?
  Try to create a filter to move messages marked as spam to Spam folder.

  • Organize your Messages using filters

• How to move all messages in local folders?

  In my Thunderbird I have an IMAP account that is no longer existing on the remote mail server. All mail is on my local drive I can open it and browse. What I want is to move all messages in local folders and get rid of the old count IMAP. It's really annoying that it always tries to connect to the remote server all the time when I open and browse mail.

  How can I do? When I try to drag and drop a few messages, Thunderbird attempts to remove them from the remote server, which of course not as the remote account does not longer exist, and that is why nothing is moved. I also searched if there is an option to take into account in offline mode, but found nothing.

  Try it in "offline" mode
  Click on two screen blue icon in the lower left corner of the status bar to switch to offline mode which will show two black screen icon.

  If this does not work, try this addon to import e-mails in local folders.

  • https://freeshell.de//~kaosmos/mboximport-en.html

  Right click on local folders > ImportExporttool > import a mbox file
  or
  in the local folders
  Create a folder of the same name
  Right-click on the created folder > ImportExporttool > import messages

• How can I move all of my settings in Firefox on a new computer.

  My old pc does not work, but I have the hard drive and access to all my files. all I'm doing is to move all of my settings for Firefox... bookmarks, passwords and settings, on my new computer. I can't sync, I can't do a backup and restore my old machine does not work... I want to just move the appropriate files. I moved my old profile to my new office. Running Windows 7 on old and new. Thank you!

  refer to

  • Recovering important data over an old profile

• Move all backups and iTunes library to external storage

  Hi all

  My MBP internal SSD is full so I want to move all the data from iTunes to external storage.

  I found how to move the library which was pretty easy.

  How can I move my backup files to iPad and iPhone? It seems to be more difficult to achieve.

  Thanks in advance

  JJ

  Not difficult, read here:

  Manage and backup your iTunes media library - Apple Support

  Two things to remember:

  the first time you open iTunes after move your library: hold down the ALT (option) and iTunes point to where you put the library on the external drive. iTunes will remember that.

  When you want to use iTunes to make sure that this disk is attached.

  Lex

• El capitan cannot move all windows to new desktop PC via mission control?

  Before moving to El Capitan, I used to be able to move all open windows in any program given to a new office in total.

  for example assume I have Stickies and Safari opened in the same space, I want to spend all my notes at the same time to a new office space and let Safari; I used to be able to slide just with 3 fingers to show all programs open in this space and click on Stickies icon and drag it to a new space. Now, I can just drag a single sticky both. Obviously, this is just one example, the same applies to any other program with multiple items open at once.

  Am I missing something, or this option is simply gone?

  Thank you

  I have not tested but make sure that 'Windows group by application' are enabled in the settings of Mission control.

• Move all data related to different drive letters

  Hello

  I want to set up a mail server on the mavericks in using the standard e-mail applications provided by apple: Dovecot and postfix.  But, for performance and reliability, I would move all mail on a zfs mirror.  What would be the best way to proceed.  I see two options:

  ((1) soft/Library/Server/Mail a link to my mirror, 2) change all the settings for postfix and dovecot so that they want my new drive.

  Two options seem very error prone to me and not reliable in the long term.  Option 1 is the way to go.

  Any other suggestions?  What do you think?

  In.app->-> your server settings, you can change the location of the Service data. This gives you the advantage of option two, while remaining compatible Server.app/serveradmin.

  It moves all the data, mail not only, but it is still recommended if you use an external RAID.