Layered above content model

Similar Questions

• Presenter content model cannot retrieve content automatically

  Hello

  I created a content model of presenter and used on a page in Oracle Webcenter Portal. This model of content presenter retrieves a file from the content server.

  When I go to the portal page, the content (a title, image and body) are not displayed immediately. If I open another tab and connect to the webcenter, then the image and the text displays in the portal page.

  No idea why this is happening. Please advice on measures to solve this problem.

  Thanks in advance.

  Concerning

  Arun rimbault

  Hello Arun,

  Please provide the version of the webcenter portal. I also met the same type of problem. For the portal question private definitively resolved using SSO between webcenter portal and content using OAM or SAML.

  To debug this problem please download the header http live and check the URL that is not rendered.  Also check the security group on the server content at the Complutense University of MADRID.

  Try also to add under entry in card credentials to the content server (connect on cs-> administrator-mapping of credentials.

  @#all,.	@public (R)

  Thank you
  Amey

• Create Split layers above original layer

  Hello everyone.

  In the Preferences-general- if you uncheck the Split create layers above original layer. So if you split a layer, Ctrl + Shift + D. You'll see the Split layer under your original layer. I was creating an animation for a movie and I wanted to have different effects in every 5 seconds, so I shared the layer several times so I could apply the effects to other layers. So, I liked the idea of Split layers under the original layer. Is there a reason perhaps better to have Split over the original layer?

  Thank you.

  Usually, you create a composite from the bottom to the top. Separation of the layers to me usually means that I add something to the composite to the new layer above the original makes perfect sense. Most of the time when I shared a layer, I'll do something different to that layer and then extend the layer below to create a composite. It would be a very strange thing for me to have a sea of layers under a layer of master because he wouldn't do that add to the antics so I wanted to build some layers by using the original footage.

  I would like to warn you to make your comps too long. 90% of my friends are suddenly and less than 7 seconds. Try to change in AE, especially an animated film, is a painful and ineffective effort. You will have more success creating shots and short sequences in AE, and then polishing and completion of your film in a NLE such as Premiere Pro. You will not save any time in projects of more than a few minutes if you make and then change in first.

• Content model presenter of webcenter

  How to display alternative files and details of primary file in the model content presenter?

  I can get the main url using the #{node.url.renderUrl}.  How to get the url of the file replacement for the same file?

  I use the last jdev 11.1.1.7 and webcenter 11.1.1.8.

  Hello.

  The municipality EL Expressions of content using Presenter simply to allow access to the primaryFile.

  The other file is mapped to the Web layout and then you need to access the 'return' of the web

  You can use some tricks to access the 'return' of web page layout:

  Vignette for the definition of the Image element to the content Presenter

  Oracle Webcenter content & portal advice: show any return of the image in a content model Presenter (My colleage blog)

  Change the setting of rendering to use web instead of the thumbnail

  I hope this helps.

  Kind regards.

• How to get the nodes size in the presenter content model

  Hi all

  I created a content model of presenter to display a list of content carousel with x of y (current number of total size).

  also I do not use af:carousel component used instead af:iterator.

  is it possible I can get number total i.e. nodes size outside a java bean.

  something like #{nodes.size} or nodes.length.

  Please suggest something which can fly running (i.e. performing edition of the model should be enough)

  Thank you

  -Yves

  Hi Yves,

  You should be able to use #{nodes.rowCount} to EL.

• Content model view presenter not showing the content of the data file for the contributor to Site Studio

  Hello

  I created a data file for contributor to the Site Studio (11.1.1.8.0) using my definition of the region RD_ONE_ELEMENT.

  Here is the XML of the contributor data file (DATA_ONE_ELEMENT.xml)

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

  " < = xmlns:wcm wcm:root ' http://www.Stellent.com/WCM-data/NS/8.0.0 "version ="8.0.0.0"> "

  < wcm:element name = "TITLE" > This is the title... Successful. < / wcm:element >

  < / wcm:root >

  It's the definition of the region (RD_ONE_ELEMENT)

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < regionDefinition xmlns =" http://www.Oracle.com/SiteStudio/element/ "" "

  " xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "

  " xsi: schemaLocation =" http://www.Oracle.com/SiteStudio/element/ http://www.oracle.com/sitestudio/ss_element_definition.xsd' > .

  elements <>

  < elementReference name = "TITLE" location = "ED_PLAIN_TEST" >

  < property name = "label" value = "TITLE" / >

  < property name = value "description" = "" / > "

  < / elementReference >

  < / items >

  < property name = value "description" = "" / > "

  < name dataProperty = 'metadata' > < / dataProperty >

  < name complexProperty = "switchregioncontent" >

  < property name = "createnewxml" value = "true" / >

  < property name = "createnewnative" value = "false" / >

  < property name = "choosemanaged" value = "true" / >

  < property name = "chooselocal" value = "false" / >

  < property name = "choosenone" value = "false" / >

  < valueList name = "createnewnativedoctypes" >

  < / valueList >

  < name complexProperty = "choosemanagedquerytext" >

  < property name = "corecontentonly" value = "false" / >

  < name dataProperty 'querytext' = > ((xWebsiteObjectType & lt; matches & gt;)) 'Data file') & lt; and & gt; (xRegionDefinition & lt; matches & gt; 'RD_ONE_ELEMENT')) & lt; or & gt; (xWebsiteObjectType & lt; matches & gt; 'Native 'Document') < / dataProperty >

  < / complexProperty >

  < name dataProperty = "defaultmetadata" > < / dataProperty >

  < / complexProperty >

  < / regionDefinition >

  In my portal, I added a Presenter content workflow. On the content tab, I put DATA_ONE_ELEMENT (one piece of content). On the model tab, I chose my Presenter content model.

  I had created a content model project Presenter DesignWebcenterSpaces (that I got from zip file - http://download.oracle.com/otndocs/tech/webcenter/files/DesignWebCenterSpaces_11.1.1.8.0.zip) here is the code:

  Here's the code for the view model:

  <? XML version = "1.0" encoding = "UTF - 8"? >

  " < = xmlns:jsp jsp:root ' http://Java.Sun.com/JSP/page "version ="2.1" "

  " xmlns =" http://xmlns.Oracle.com/WebCenter/content/templates "" "

  ' xmlns:af = ' http://xmlns.Oracle.com/ADF/faces/rich "> "

  < var dt:contentTemplateDef = "node" >

  < af:outputText value = "#{node.path}" id = "ot1" / > "

  < af:outputText value = "#{node.propertyMap ['RD_ONE_ELEMENT:TITLE'] .asTextHtml} '"

  ID = "ot2" / >

  < / dt:contentTemplateDef >

  < / jsp:root >

  The output I see on the Web page is as follows:

  / EXTASC/DATA_ONE_ELEMENT. XML

  I don't see any other texts. Which means, there is no output of:

  < af:outputText value = "#{node.propertyMap ['RD_ONE_ELEMENT:TITLE'] .asTextHtml} '"

  ID = "ot2" / >

  Can someone help me in this? I would like to see the value of my Web page TITLE.

  Hello.

  I am currently weapons... This is not normal, as is a common task.

  Sorry, but we do a general audit of the configuration before enabling the TRACE log levels because it should be a simple thing missing.

  Can you confirm that WebCenter content are activated as a result of components (UCM Console-> Administration-> server-> Component Manager Admin)? :

  - Studio site.

  -Site of Studio for external Application.

  -WebCenterConfigure

  -LinkManager

  -DBSearchContainsOpSupport

  
  

  In the case of be activated all (don't forget to restart UCM if you turn any component). Make sure that you have done as following steps:

  1. Log in to Content Server and open the Administration page.
  2. Select the Studio Site Administration, and then set the default Project Document information.
  3. Accept the default settings, and then click Update.
  4. Select the Studio Site Administration, and then to set Document information by default Active Web.
  5. Accept the default values and click Update

  Kind regards.

• Failed to load the metadata server using GET_DOC_METADATA_INFO content model?

  Hi all
  
  I create connection in Jdeveloper to the repository of content both are 11.1.1.6.0 version. I'm creating RIDC Socket type Socket.
  everything by testing the connection I get under Error.UCM runs in other ways machine come IP. trying to connect from my local Jdeveloper.
  
  Test failed:
  Failed to load the metadata server using GET_DOC_METADATA_INFO content model.
  Permission denied. Address ' XX. XX. XX. XX'(IP) is not an authorized remote socket address. (IP replaced by XX...)
  
  Why his error.do showing that I need to put any changes of the UCM let me know problem question
  
  Please give me an idea about this error and the solution for the same.
  
  
  Concerning
  Siva sery

  To eliminate the first manifesto, see this post: fail to connect to the content if server use 'web' for the RIDC socket type and check that the other IP is allowed, amongst, IPs (you can use a mask, or type it directly) - do not forget to restart the server after the change.

  If this does not help, test, if other services such as DOC_INFO_BY_NAME can be called via RIDC, or if they have the same problem.

• Delete the layer and fill the empty place in the timeline with layers above

  Hello

  When I delete a layer of AE CS5.5, is there a way I can get all the other layers above him to retreat and to fill in the empty space in the timeline, without physcially having to pass them all?

  Not automatically.  But you can do this:

  Place the cursor in the timeline to the place where you first layer to begin once that everything is moved.

  Click on the layer immediately above the layer you want to delete.

  Shift-click on the upper - layer you have selected now all layers above the one to delete.

  Maj-do drag the selected layers.  They will align with the point where the cursor of the timeline.

  Once you have verified that all is well, delete this undesirable layer.

• Achieve visible layers through the layers above them

  I can't understand this. In Photoshop CC if I do a new adjustment layer, it blocks the effect of the layers beneath it. How can I get the effects of the other layers are visible? For example, if I copy the background layer to clone a default and then add a layer of burning somewhere, can't do them as well to show up--according to what is on top, that's what shows. I tried the merger, put them in a group, etc., and the same problem is there.

  I of course forget something obvious, right?

  Ed Merrin

  It seems that you want to burn in an area on the dupe layer in which you had cloned on an object. You want to burn it on a separate layer. If this is the case:

  Add an empty layer above the dupe layer: Edit > fill with 50% gray and change the blending mode in the layers of overlay Panel.

  Then paint with black to burn an area, paint with white to dodge an area. Set the Options bar opacity to paint in small increments.

  (Do not use the Burn and Dodge tools >)

• Table InDesign content model

  Hello

  I would like to creat content/index United Nations table and include in a paragraph styles that are in my model (gabbarits), but it does not work. Is it possible? How?

  Also I would like to place the style of paragraph 2 on the same line...

  Please help me

  You cannot have two paragraph styles on the same line, but you can use styles GREP and/or styles nested to automatically add Character Styles to specific parts of your line.

  The extent of why you cannot successfully create your Table of contents of your paragraph style, explain what you tried and what has happened.  Screenshots help us understand your process and maybe understand what goes wrong.

• help edit the layers of starter model

  Hi I have a client that I chose to use the photo adobe Starter model. How to change the home page titled expose? I want to tell it like it is the layers panel. the Toronto show the following

  Page, footer menu

  How to change or merge in the next layers?

  Master of the House,

  I also want to separate the page sign in what follows. I noticed the layout of the phone is on the layout.  which is the same as the layout of office. as he muse configuration confuses me. I was told that its best to each layout on its own layer.  but I'm afraid I can screw up the entire site.

  other than the site is great. only I don't get a design page layouts. its so different after trial to white.

  problem has been resolved. I was playing with layers and discovered there's a movement to the layer in the object Panel. I created a new layer and called it the menu phone. then in the menu, I moved everything under this new layer. That's what I was trying to separate the layers without messing up the layout of the site.

  Thank you

• Cannot add content "model of development" in the edition of model

  Hello
  
  I created a new template and I am trying to add a custom navigation (created by me only) in this model.
  When I'm clicking on "add content", I get only the options below:
  
  Alerts and updates
  Analytics
  Content management
  Mash-Ups
  Surveys
  Portlets
  Social and Communication
  Tagging and research
  Web development
  
  I get no option to add the created Navigation.
  I get also on console error below:
  
  < 18 July 2012 15:52:30 IST > < WARNING > < oracle.webcenter.webcenterapp.internal.
  model > < BEA-000000 > < Exception while getting the value of the parameter for pg_pageTemplate
  ID in PageDef: / pageDefs/oracle/webcenter/siteresources/scopedMD/s39012866_e610_
  47a5_8313_bd7e2309f6bb, siteTemplate, gsr5e003700_2b09_4c2a_95e1_e296414c7bfe, Cont
  ainerPageDef.xml, Exception: oracle.mds.core.MetadataNotFoundException: MDS-00013
  : no metadata found for the metadata object ' / pageDefs/oracle/webcenter/siteresource.
  s/scopedMD/s39012866_e610_47a5_8313_bd7e2309f6bb/siteTemplate/gsr5e003700_2b09_4
  c2a_95e1_e296414c7bfe/ContainerPageDef.Xml">
  < 18 July 2012 15:52:30 IST > < Info > < oracle.webcenter.framework.resource.extern
  Al. GenericRequest > < BEA-000000 > < RESOURCEURI: HttpServletRequest.getScheme = http >
  
  < 18 July 2012 15:52:31 IST > < WARNING > < oracle.webcenter.webcenterapp.internal.
  model > < BEA-000000 > < Exception while getting the value of the parameter for pg_pageTemplate
  ID in PageDef: / pageDefs/oracle/webcenter/siteresources/scopedMD/s39012866_e610_
  47a5_8313_bd7e2309f6bb, siteTemplate, gsr5e003700_2b09_4c2a_95e1_e296414c7bfe, Cont
  ainerPageDef.xml, Exception: oracle.mds.core.MetadataNotFoundException: MDS-00013
  : no metadata found for the metadata object ' / pageDefs/oracle/webcenter/siteresource.
  s/scopedMD/s39012866_e610_47a5_8313_bd7e2309f6bb/siteTemplate/gsr5e003700_2b09_4
  c2a_95e1_e296414c7bfe/ContainerPageDef.Xml">
  < 18 July 2012 15:52:31 IST > < Info > < oracle.webcenter.framework.resource.extern
  Al. GenericRequest > < BEA-000000 > < RESOURCEURI: HttpServletRequest.getScheme = http >
  
  Can anyone provide any input on that?
  
  TIA
  Amrita

  Hi Amrita,

  You cannot add the navigation model directly modeled on the author's page, but you can add style of navigation (tree, menu, tab etc.) for the default navigation in the catalog of resources. Once you add navigation style on your page template, you can then change the default navigation for another model of navigation model by using the following steps:-

  1. in the properties of the component: tree Navigation dialog, click the settings tab.
  2. in the Navigation drop-down list, select your Navigation model.

  I hope this has answered your question.

  Kind regards
  Imran

• SmartImport - add to the layers of scale model

  Is it possible to edit the SmartImport script in the after effects place the results processed directly in a model? Basically, I would like to automate typing a bunch of image sequences and to have these seqeunces fell into a specific model.

  I thought I would add something like that need to reference files to find in the SmartImport function... but I don't know what/how the SmartImport variable are used?  Any help would be GREATLY appreciated.

  masterComp Variables

  var compWidth = 1920;

  var compHeight = 1080;

  var compPAR = 1;

  var compDur = 60;

  var compFPS = 24;

  Create the Master model

  var masterComp = app.project.items.addComp ("MASTER", compWidth, compHeight, compPAR, compDur, compFPS);

  Results SmartImport place in masterComp

  masterComp.layers.add (SmartImportResults);

  If you can assume that the elements of one film in the project bin are those imported by SmartImport, you could do just something like this after you have created your model:

  for (var i = 1; i)<= app.project.numitems;="">

  If (app.project.item (i) instanceof FootageItem) {}

  masterComp.layers.add (app.project.item (i), masterComp.duration);

  }

  }

  Otherwise, you will need to change SmartImport to save its results as it goes along. I would probably create a global network at the beginning of script

  var myFootageItems = [];

  and then change the importSafeWithError() function to push the results in the table:

  function importSafeWithError (importOptions)

  {

  try {}

  var myFootage = app.project.importFile (importOptions);

  myFootageItems.push (myFootage);

  } catch (error) {}

  Alert (Error.ToString () + importOptions.file.fsName, scriptName);

  }

  }

  Then in your code, just go through the table and add the layers:

  for (var i = 0; i)< myfootageitems.length;="">

  masterComp.layers.add (myFootageItems [i], masterComp.duration);

  }

  I have not tested this code, so it may not be perfect, but it should be close.

  Dan

• Photoshop: The black brush tool covers layers above it

  http://prntscr.com/b9r299

  The main drawing and color is on the tier 2, but to show the question, I did blacks 2 layers below that. As you can see, the Black just covers everything and the darker color on the brush, it covers the upper layers. If I use a lighter color, it'll be a little opaque, but always the cover upward and white remains on the active layer.

  I honestly have no idea how to solve this problem and it is only the application of this document. I tried to move the layer to another document, but the effect is always the same. My finger down to that but there are still a lot of unknown territory, I don't know where I go from here.

  The visible layer has an opacity of 100% and a normal blending mode. Check your other layers. Layers can be changed after the fact.

  Your current brush has an opacity of 100% and a normal blending mode. Either change would cause also this situation as you paint.

  First check the layers.

  Then try painting with different opacities and blending as a test modes to see how it works. Do it on a new layer, so you can trash.

• MUSE + Safari bug: scrollbar overlap gradient items on layers above.

  This seems to only happen in Safari on the desktop version of the www.vert.com site I've created.

  I also work on a version of www.vert.com/test/ test

  
  It works great on the Tablet and mobile, but for the desktop version, it is as if the gradient is "pinned" to the top and sometimes overlapping points I placed on UPPER layers...  (?)

  I have cleared my cache, reuploaded the site, but still not the issue, and it should be fixed.

  
  Anyone has an idea why this is? and how to run around it to make it work?

  Thank you guys!

  Please refer to the similar topic here:

  https://forums.Adobe.com/message/6416723

  Thank you

  Sanjit