Layers of curve ignored when physical one?

Similar Questions

• Create the action drag and drop layers of curve of one file to another?

  Good, everyone!

  I am recording a Photoshop Action that...

  1 open a source file

  2 selects the specific curve layers

  3 door the layers of curve in a destination file.

  I tried to simply drag / drop the selected layers from the source to the destination document, but the Action records only "select previous document" without actually transferring the curves.

  I can right click on the layers, I want to breed and select "in double layers...". "but she blocks the Action in a specific destination AND it will not allow the menu appears.

  I could look at it a different way, I save each as preset curves layer and has the Action simply create layers instead of dragging a file source. However, I have a prohibitive number of those darned layers and most of them have "Mix Ifs" on them as well, and that would take a lot of time to produce.

  Any suggestions?

  Thank you

  Bruce

  
  

  The function below copy a layer of the activeDocument (selected doc and layer) to the next open document. If only the two documents are open, it doesn't matter what order the documents are in. i.e. with only two following open documents and previous doc is the same doc.

  function copyLayerToNextDoc() {
      var desc = new ActionDescriptor();
          var ref = new ActionReference();
          ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
      desc.putReference( charIDToTypeID('null'), ref );
          var ref2= new ActionReference();
          ref2.putOffset( charIDToTypeID('Dcmn'), 1 );
      desc.putReference( charIDToTypeID('T   '), ref2 );
      desc.putInteger( charIDToTypeID('Vrsn'), 5 );
      executeAction( charIDToTypeID('Dplc'), desc, DialogModes.NO );
  };
  

• How to stop firefox quiting last tab (when only one tab is open) without warning?

  I want to turn off ctrl + w when only one tab is open so that when only one tab is open, and if I press ctrl + w by mistake he shoud warn me before closing the browser

  You can set the pref browser.tabs.closeWindowWithLastTab to false on the topic: page config to prevent the closure of the last tab to close this window and display a close button if only one tab is open.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• Creation function Interior package Error (15,3): PLS-00103: encountered the symbol ";" when expecting one of the following values: back

  Hello

  I am trying to create a function inside the packaging.

  In the Package BODY I've defined the function, but in the definition of the package, it gives me syntax errors.

  • Error (15,3): PLS-00103: encountered the symbol ";" when expecting one of the following values: back
  • Error (39.1): PLS-00103: encountered the symbol "END" when waiting for one of the following values: start the function pragma procedure subtype type current cursor removal exist prior

  What can I do wrong here.

  Thank you

  Ken

  Inner package BODY:

  / * FUNCTION to form the query * /.

  FUNCTION UDF_FORMQUERY)

  IN_CASEID VARCHAR2,

  IN_SRCLYR VARCHAR2,

  IN_SRC_CONDN VARCHAR2

  )

  RETURN VARCHAR2

  AS

  varSQLQuery VARCHAR2 (10000);

  BEGIN

  varSQLQuery: = "test query";

  RETURN varSQLQuery;

  DBMS_OUTPUT. Put_line (varSQLQuery);

  END UDF_FORMQUERY;

  Definition of package inside:

  create or replace PACKAGE BODY MY_SQUERY

  AS

  FUNCTION UDF_FORMQUERY)

  IN_CASEID VARCHAR2,

  IN_SRCLYR VARCHAR2,

  VARCHAR2 IN_SRC_CONDN( )

  RETURN VARCHAR2

  AS varSQLQuery VARCHAR2 (10000);

  END MY_SQUERY;

  your package definition is incorrect, you have included the part of the declaration of the variables of the function in the package definition. It should be like

  FUNCTION UDF_FORMQUERY)

  IN_CASEID VARCHAR2,

  IN_SRCLYR VARCHAR2,

  IN_SRC_CONDN VARCHAR2)

  RETURN VARCHAR2;

• I have problem in the PDF export to save only the layers appeared only. When I export the indesign file to PDF that contains layers hidden pdf placed, pop up problem when I use the search field in exported pdf file. hidden text of hits from search results

  I have problem in the PDF export to save only the layers appeared only. When I export the indesign file to PDF that contains layers hidden pdf placed, pop up problem when I use the search field in exported pdf file. hidden text of hits from search results to laye

  I answered your question: there is nothing you can do in InDesign. You need to ask in the Acrobat forum I linked.

• PLS-00103: encountered the symbol "" when expecting one of the following values:

  Hello
  
  When running under pl/sql block get below error...
  
  Please advice me where I am wrong
  
  DECLARE
  T_DATE date: = sysdate-813;
  v_last_closing_book_bal_amt (19: 4) NUMBER: = NULL;
  v_txn_amt (19: 4) NUMBER: = NULL;
  v_max NUMBER (5): = 100;
  NUMBER (5) v_count: = 1;
  
  BEGIN
  
  FOR I IN 1.30
  LOOP
  
  WHILE (v_count < = v_max)
  LOOP
  Insert into AI_ODS_TXN (BANK_BRANCH_ID,ACCT_NO,ISO_CCY_CD,CR_DR_IND,BOOK_DT,VALUE_DT,TXN_KEY,TXN_TYP_DE,TXN_CAT_DE,TXN_CD,TXN_AMT,FUNDS_TYP_CD,RPT_REF_TXT,INSERTED_TS,UPDATED_TS,BANK_ABA_NO,BENE_PARTY_BANK_ID,BENE_PARTY_BANK_NM,BENE_PARTY_BANK_ADDR_LINE1_TXT,BENE_PARTY_BANK_ADDR_LINE2_TXT ,BENE_PARTY_BANK_ADDR_LINE3_TXT,BENE_BANK_ID,BENE_BANK_NM,BENE_BANK_ADDR_LINE1_TXT,BENE_BANK_ADDR_LINE2_TXT,BENE_BANK_ADDR_LINE3_TXT,DETAIL_LINE1_TXT,DETAIL_LINE2_TXT,DETAIL_LINE3_TXT,DETAIL_LINE4_TXT,DETAIL_LINE5_TXT,FED_CLEAR_TS_TXT,CR_DR_PARTY_NM,CR_DR_PARTY_ADDR_LINE1_TXT,CONTROL_NO,INTERMED_BANK_ID ,INTERMED_BANK_NM,INTERMED_BANK_ADDR_LINE1_TXT,INTERMED_BANK_ADDR_LINE2_TXT,INTERMED_BANK_ADDR_LINE3_TXT,ORG_BANK_NM,ORG_BANK_ADDR_LINE1_TXT,ORG_BANK_ADDR_LINE2_TXT,ORG_BANK_ADDR_LINE3_TXT,OGB_BANK_NM,OGB_BANK_ADDR_LINE1_TXT,OGB_BANK_ADDR_LINE2_TXT,OGB_BANK_ADDR_LINE3_TXT,INSTRUCT_BANK_NM,INSTRUCT_BANK_ADDR_LINE1_TXT ,UNCLEAR_DT,UNCLEAR_ITEM_IND,INSTRUCT_AMT,INSTRUCT_CCY_CD,SENDER_CHARGE_LINE1_TXT,SENDER_CHARGE_LINE2_TXT,SENDER_CHARGE_LINE3_TXT,SENDER_CHARGE_LINE4_TXT,REGULATORY_TXT,BANK_REF_TXT,EXT_REF_TXT,YOUR_REF_TXT,FED_DR_ACCT_NO,SWIFT_STMT_NO,NDC_CD,BAI_CD,SWIFT_CD,CNS_SEQ_NO,LOAD_NO,UPDATED_WORKFLOW_NM,EXCHANGE_RT,ORG_BANK_ID ,OGB_BANK_ID,INSTRUCT_BANK_ID,SRC_MSG_TYP,CLEAR_DT,JOURNAL_NO,SERIAL_NO,SWIFT_STMT_DT,CR_DR_TXT,SUPP_DETAIL_TXT,GVC_CD,BOOKING_TXT,ITEM_TYP_DE,ORG_BANK_ACCT_NO,RETURNED_DDT_TXT,DETAIL_LINE6_TXT,DETAIL_LINE7_TXT,DETAIL_LINE8_TXT,DETAIL_LINE9_TXT,DETAIL_LINE10_TXT,DETAIL_LINE11_TXT,DETAIL_LINE12_TXT,DETAIL_LINE13_TXT ,DETAIL_LINE14_TXT,EXTRA_BCS_DETAIL_IND,OGB_BANK_ACCT_NO,INTERMED_BANK_ACCT_NO,CR_FLOOR_LIMIT_AMT,DR_FLOOR_LIMIT_AMT,MT942_TOTAL_CR_AMT,MT942_TOTAL_CR_NO,MT942_TOTAL_DR_AMT,MT942_TOTAL_DR_NO,INTERIM_FINAL_TXN_IND) values ('DBBRUSSELS','825-0004665-47','EUR','C',to_timestamp(v_date,'DD-MON-RR HH.MI. SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), '2009102201521911232172' + v_count, "TRANSFER", "TRANSFER of FUNDS", "SWF", 100, "VT", "I000424906808216", to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), null, null, null, null, "AAAAA35AAHNLEITEN GMBH", null, null, null, null, null, null,'IHR KT 0000002056/200000044 ', 4 NR.5100000835 09.03.09/N','ETTOBTR. NR.510000', ' 0872 6.627,01 10.03.09/NETTOBTR. 4', 559, 21 NR.5100000891 11.03', null, null, null, null, null, null, null, null, null, "DUROPACK AG 1235 WIEN", "XXN33XXXXROHNLEITEN GMBH", null, null, null, null, null, null, null, null, null, ' n, null, null, null, null, null, null, null, ' PET326000108PAGE AND ', 'I000424906808216', 'I000424906808216', null,' 102/1 ', null, 195, 'TRF', null, 0, "w_MT940_PROC - Type: first STMT ', 0, '15150', null, null, '940', null , null, null, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) (SSXFF AM'), 'C', null, '051', ' GUTSCHRIFT ELEKTRON. ", '76VB', '501057590',"QQQ34DQQQROHNLEITEN GMBH ", 09/NETTOBTR. 5.093,33 NO.5 ',' 100000899/12.03.09/NETTOBT','R. 2.302,58 NR.5100000917 / 13.03.09/NETTOBTR «,» (831,37 no, 'R.5100001006 2', null, null, null, null, null, null,' n, null, null, null, null, null, null, 'F');
  COMMIT;
  
  v_count: = v_count + 1;
  
  END LOOP;
  
  
  
  
  
  Select nvl(last_closing_book_bal_amt,0) in the v_last_closing_book_bal_amt of ai_ods_acct_tbl
  WHERE ACCT_NO = 825-0004665-47' AND BANK_BRANCH_ID = 'DBBRUSSELS' AND ISO_CCY_CD = "EUR";
  
  Select nvl (sum (txn_amt), 0) in the v_txn_amt of ai_ods_txn
  WHERE ACCT_NO = 825-0004665-47' AND BANK_BRANCH_ID = 'DBBRUSSELS' AND ISO_CCY_CD = 'EUR' and book_dt = to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM');
  
  
  
  Insert into ai_ods_BOOK_dt_agg (BANK_BRANCH_ID, ACCT_NO, ISO_CCY_CD, BOOK_DT, TOTAL_DR_ITEM_NO, TOTAL_DR_AMT, TOTAL_CR_ITEM_NO, TOTAL_CR_AMT, INSERTED_TS, UPDATED_TS) values ('DBBRUSSELS', 825-0004665-47', "EUR", to_timestamp (T_DATE,' DD-MON-RR HH.MI.)) SSXFF AM'), 0,0,4, v_txn_amt, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'));
  Insert into ai_ods_value_dt_agg (BANK_BRANCH_ID, ACCT_NO, ISO_CCY_CD, VALUE_DT, TOTAL_DR_ITEM_NO, TOTAL_DR_AMT, TOTAL_CR_ITEM_NO, TOTAL_CR_AMT, INSERTED_TS, UPDATED_TS) values ('DBBRUSSELS', 825-0004665-47', "EUR", to_timestamp (T_DATE,' DD-MON-RR HH.MI.)) SSXFF AM'), 0,0,4, v_txn_amt, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'));
  Insert into ai_ods_CATEGORY_agg (TXN_CAT_DE, BANK_BRANCH_ID, ACCT_NO, ISO_CCY_CD, BOOK_DT, TOTAL_DR_ITEM_NO, TOTAL_DR_AMT, TOTAL_CR_ITEM_NO, TOTAL_CR_AMT, INSERTED_TS, UPDATED_TS) values ("TRANSFER of FUNDS", "DBBRUSSELS", 825-0004665-47', "EUR", to_timestamp (T_DATE,' DD-MON-RR HH.MI.)) SSXFF AM'), 0,0,4, v_txn_amt, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'));
  
  Insert into ai_ods_acct_bal (BANK_BRANCH_ID,ACCT_NO,ISO_CCY_CD,BOOK_DT,INTERIM_FINAL_BAL_IND,LOAD_NO,BOOK_BAL_AMT,VALUE_BAL_AMT,COLLECTED_BAL_AMT,TOTAL_DR_AMT,TOTAL_CR_AMT,TOTAL_CHECK_CR_AMT,TOTAL_LBX_AMT,TOTAL_IMPREST_DR_AMT,TOTAL_IMPREST_CR_AMT,ONE_DAY_FLOAT_AMT,TWO_DAY_FLOAT_AMT,THREE_DAY_FLOAT_AMT ,FOUR_DAY_FLOAT_AMT,MTD_AVG_COLLECTED_BAL_AMT,YTD_AVG_COLLECTED_BAL_AMT,INSERTED_TS,UPDATED_TS,UPDATED_WORKFLOW_NM,OPEN_BOOK_BAL_AMT,SWIFT_STMT_DT,SWIFT_STMT_NO,MISSING_STMT_IND,SRC_MSG_TYP,TAG_60F_DT,TAG_60F_AMT,STMT_TYPE_IND) values ('DBBRUSSELS','825-0004665-47','EUR',to_timestamp(v_date,'DD-MON-RR HH.MI. SSXFF AM'), 'F', 0, v_last_closing_book_bal_amt + v_txn_amt,.
  v_last_closing_book_bal_amt + v_txn_amt, 0, 0, v_txn_amt, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), to_timestamp (T_DATE,' DD-MON-RR HH.MI.) SSXFF AM'), ' w_MT940_PROC - Type: first STMT ", v_last_closing_book_bal_amt, to_timestamp (T_DATE,' DD-MON-RR HH.MI.) (SSXFF AM'),' 102/1 ', ', '940', to_timestamp (17 April 09 ',' DD-MON-RR HH.MI.) SSXFF AM'), v_last_closing_book_bal_amt, '=');
  COMMIT;
  
  T_DATE: = sysdate-809;
  T_DATE: = T_DATE + I;
  v_count: = 1;
  
  END LOOP;
  END;
  /
  
  
  ERROR
  *=====*
  
  T_DATE date: = sysdate-813;
  ***
  ERROR on line 2:
  ORA-06550: line 2, column 7:
  PLS-00103: encountered the symbol "" when expecting one of the following values:
  constant exception < an ID >
  * < a double-quoted delimited identifiers > table double Fedya Ref *.
  char time timestamp interval date binary national character
  NCHAR

  Hello

  First of all, you said T_DATE as DATE data type

  v_date                                      date := sysdate -813;
  

  And then you try to use a timestamp like this

  to_timestamp(v_date,'DD-MON-RR HH.MI.SSXFF AM'),
  

  T_DATE's DATE, not VARCHAR2.

  You should try CAST to convert the TIMESTAMP DATE. Or. first convert the VARCHAR2 DATE, then by TIMESTAMP.

  Kind regards

• Windows 7 - why the priority of network adapter is ignored when you are connected to the area on a lower priority NIC?

  I have two network cards installed on my laptop.  I wanted to test and see how Windows 7 Ultimate managed the priority of the network adapters so I connected to a small Internet (NIC B) router, and the other on my domain (NIC A).
  First of all, it was a pain to find network adapter priority.  After some research and fun Google I found this.  Unfortunately, the search bar has not helped.
  Control Panel-> network and Internet-> view network status and tasks-> to modify the adapter-> Hold down 'alt' to bring up the menu "File"-> select 'Advanced'-> select 'Advanced settings' in the menu drop-down-> adjust your priorities of the adapter in the 'Advanced settings' window, under the tab "maps and links.

  With "B NIC", defined as the highest priority, I tried to browse the internet.  It was impossible to travel.  Then I disabled 'NIC A' (the NIC domain) and I can browse the internet.  Windows XP he handled this much better.

  Select 'NIC A', and then check 'NIC B' is the highest priority.  Then try tracert on www.google.com.  It refreshes my domain as the first hop router.  It seems to be completely ignoring 'NIC B', unless I have disable 'NIC A' completely.

  In case someone of another Vienna here, looking for the answer to this, as I did, I thought that putting the real solution to this question.  Many web pages say to change the priority of going on network connections and change the order there to what you like.  You don't have to bother with this setting.

  It does not work. He has apparently no effect on the use of connections.

  What Windows actually uses is the metric value for network connections.  The lowest metric value is tried first.  In my case, I have a connection broadband shabby home, but I can attach wireless on my phone for occasional good bandwidth.  So, I want to always use the connected wireless and ignore the wired connection, but still the chance to printers and other things on my network cable at the same time.  I want to keep both on and not to disable the wired when I use my phone.

  To resolve this problem for real, go to and right click your Wi-wired adapters and one at a time to change the properties.  Select IPv4, click and then .  For each of them, disable the "Automatic metric" checkbox and set the metric value manually.  I put the wireless cable and 1-2, which gave me the behavior I wanted.

  The Automatic metric is defined by Windows based on the speed of connection and a wired connection is generally faster than a wireless one.

• Problem exporting? : objects in front or on the upper layers are not displayed when exporting to jpeg or png

  It's very strange. The image looks perfect on board art .ai. But, when I try to export the image (in jpeg or png format), one of the objects which is clearly backward masks in front of other objects. I tried transfer to different layers to ensure that it wasn't one thing front to back, and it's the same problem.  When I changed the color to the front (or on the top layer) object from white to a color, it resembles a kind of effect/appearance/transparency problem goes away, but there is no transparency applied to each of the objects. They are all natural and 100% opacity.

  This is the banner of solid color behind the type indicated (see below) which is the problem. I tried regular objects (instead of specified type and same problem.) I just upgraded to the latest version of Illustrator, no luck.

  Here's what it looks like on my screen:

  

  but here's what happens when I export (or save for web)

  

  It seems, when I save in PDF, incidentally.

  Check that you do not have these elements the value "overprint"?

  Look at the attributes Panel when an item is selected.

  White text should NOT be set to overprint.

  ?

• ActionScript ignored when the film is put to the test

  I have a movie of 15 images in flash cs4

  I have a bg layer, composed on inanimate video clips (so that I can apply shadows to objects)

  I have 4 layers of animation film clips that have anchored OS animations. When I say some I mean that when I double click on it, I can access the animation of the OS. (I did this so that I can hold the bone animated object in a clip that I can apply a drop shadow)

  I have a layer of hotspot which is a transparent rectangle so that when the user moves the mouse over the area, the chronology and animations start

  now, here is the actionscript code:

  Section 1:

  Stop();

  hotspot.addEventListener (MouseEvent.MOUSE_OVER, animate_family);

  function animate_family(e:MouseEvent):void {}

  gotoAndPlay (1);

  stop();

  }

  section 15:

  gotoAndStop (1);

  MY PROBLEM: THE ACTIONSCRIPT IS IGNORED. THE ANIMATION IN A LOOP, NEVER STOPS AND STARTS EVEN WHEN I MOUSE OVER THE HOTSPOT REGION.

  If animations are movieclips that are on the timeline, so that you have this code works, they're going to play.  You need stop () s in the animations and your code must comand embedded animations to play.

  I don't know what your intent is with gotoAndPlay (1) immediately followed by a stop().  The code runs much faster than the trip of the timeline, so that the stop is probably put an end to the gotoAndPlay nothing... but I've never tried or seen before, then he could do something else as well.

• Dynamic user LV 2011 events ignore when you're already handling a

  Hello

  I have a UI which fires def dynamic events to control a process. These events are handled in a vi running in parallel. Say that the user has decided to fire an event of 'start', which is handled by the event handler, and now I would like to than the event handler to ignore all subsequent events, until the process of 'start' is complete. Such as if the user triggers two events 'Start', the other will be completely ignored. Then, when the "starting" event has been processed, events turned back on, so that the user my send another event 'start '.

  How do I do this in labview 2011?

  In labview 2009, I unregisted the user event and then he saved when you have completed the process.

  In labview 2011, it does not. After the cancellation of the registration of the user events, labview all future events, don't even know if you resave the. (This causes my application to freeze, because it receives more events. What is really annoying!)

  Can anyone help?

  labjunky

  labJunky wrote:

  Thanks FraggerFox, the technique used in this discussion of LAVA is only useful for control of the façade events and cannot be used for events defined by the dynamic user,.

  I understand the link, rather than event non-registration help unsubscribe feature events in LabVIEW, try passing a null reference to unregister it.

  The trick is illustrated in the example: registry of \general\dynamicevents.llb\dynamically for events.vi

  Consider extending the example: I want to receive a notification of event user as well, all the time. To cancel registration for both events shown in the example above, but not to cancel the registration of the user event, I must use null record. If I call the primitive unregister, I'll eventually unsubscribe to my user and event. Similarly, the use of the global unsubscribe primitive does not work if you have different dynamic events with different life spans.

• Restore to factory settings option does not appear when the one key recovery button?

  When I press on my one key recovery button the window that apears only shows the backup of the option and the option to create recovery disk. Why? How can I restore my computer without factory? How can I restore to a previous state?

  What you are experiencing is the OneKey Recovery program in Windows. This allows you to create a new backup and burn recovery CD/DVDs. To run the OneKey Recovery and restore of factory default, you must shut down the computer, then press the OneKey. This recovery feature has recovery option.

• in the design mode layers are moving downwards when the height of the page gets larger?

  Hello World)

  Could someone please advice me how can I stop the layers and groups to move when I'm changing the height of the page. Even if I block them, they spend when I change the height of the page.

  Is this a bug or how to get rid of this effect?

  Thank you)

  Hello

  It depends on the content that you have placed in your Muse site and how it is placed in the site.

  For a more in-depth analysis, we would have to look at your site and its content.

  Kind regards

  Akshay

• Is there anyway to keep the layers in Photoshop Elements when recording in format .jpg?

  I am new to the use of PES and I like their concept of layers so that the original photo is not altered, however, my preference is to save all my files using .jpg.  I actually discovered yesterday that after 3 weeks of scanning in very old family photos, then using PSE11 and using layers and then backup to .jpg, now when I open it again these files in EPS that the layers created have disappeared.  Help, please!

  Thanks for the recommendation on Googling PSD to JPEG conversion that I'll look in.  My plan is I think the first scenario that you mentioned.  I spent a week off the coast during Christmas pictures old many sorting that I inherited and have since bought an Epson V600 Scanner that came with Photoshop Elements.  I spent a number of weeks of research on the best practices to use with the Epson scanner analysis, then an equal amount of time familiarizing myself with Photoshop Elements I've ever used before.  In particular, compared to the other I used photo editing tools, I really like the ability to retouch PSE and localized sharpening / Brush tool for a lot of old photos that aren't in the best of shape.  To change things (just if I'm not scanning for a year and then touching up for another year +), I'm scanning a group of photos I've sorted by theme and then spending time using Photoshop on these, and most of the time I'm scanning only pictures of people that I know to be members of the family or friends of family nearby. Once this batch is finished, I was moving to the next batch of scanning and treatment with PSE.

  Funny you should mention the kodacolor the slides that you have scanned.  I did this same work (approx. 5000 slides that my dad had in his lifetime) about 7 years ago with a slide scanner that I bought at the time.  Like you, I've scanned everything and then using a tool (Zoombrowser) editing of Canon, I hit only these slides scanned with meaning for me.  Now the phase 2 (7 years later) is scanning in all my photos of old parents, and I've already sorted on the pictures, I think no family, so now are using PSE, I expect I'll do some sort of button until most of them.  Sorry for the lengthy response, but I enjoyed reading of your recommendations and appreciate the help and guidance you provided.  Thanks for all your help and your time.

  Rob

• Basemap layers is not displayed when the following mask.

  So, I'm doing the mask of follow-up, but I do not see the results of my masks because the lower layers (the original film) will not show under the mask. I watched several video YouTube, and all their videos showed when they clicked the button of the eye. Mine does nothing. I click/enable/disable the buttons of the eye, and nothing does nor appears again. I just want to see how the mask looks at video.

  If I click on the bottom layer, I can watch it alone... but I can't watch all my layers together. The top layer was just transparent boxes (or I can switch to black). How to make all my layers to show at the same time?

  p.s. I'm on the trial version of AE CC. I just got yesterday. I have an account of creation adobe Photoshop & Lightroom.

  

  Photo above shows the top layer. Problem is I can't get the other layers to show under that, I just see a bunch of boxes of transparency...

  Looks like you are looking for in the layer window and not the comp window.  Viewers of change and life improves, I bet.

• Why some of my photo files appear corrupted when importing one of my SD memory cards?

  Lightroom 4

  Lion OS

  Canon 5 d MarkIII

  Some of the files seem corrupted when I import from one of my memory cards SD.  I import RAW files.  I have 4 other memory cards.  So far, it is not happened with other cards.

  The affected files have areas with a bright and multicolor background and gangs who block the photo...

  I have an Epson Viewer.  The files look OK when using this device.  A local photo store opened the files in another program, and they looked very good.

  The camera shop thought my Lightroom Catalog is maybe damaged.

  Any thoughts about what is the cause?

  After you import photos from a different SD card and two CF cards successfully, I concluded that the problem is most likely a faulty SD card.

  Thanks to the participants for their contribution.