PLS-00103: encountered the symbol "" when expecting one of the following values:

Similar Questions

• Creation function Interior package Error (15,3): PLS-00103: encountered the symbol ";" when expecting one of the following values: back

  Hello

  I am trying to create a function inside the packaging.

  In the Package BODY I've defined the function, but in the definition of the package, it gives me syntax errors.

  • Error (15,3): PLS-00103: encountered the symbol ";" when expecting one of the following values: back
  • Error (39.1): PLS-00103: encountered the symbol "END" when waiting for one of the following values: start the function pragma procedure subtype type current cursor removal exist prior

  What can I do wrong here.

  Thank you

  Ken

  Inner package BODY:

  / * FUNCTION to form the query * /.

  FUNCTION UDF_FORMQUERY)

  IN_CASEID VARCHAR2,

  IN_SRCLYR VARCHAR2,

  IN_SRC_CONDN VARCHAR2

  )

  RETURN VARCHAR2

  AS

  varSQLQuery VARCHAR2 (10000);

  BEGIN

  varSQLQuery: = "test query";

  RETURN varSQLQuery;

  DBMS_OUTPUT. Put_line (varSQLQuery);

  END UDF_FORMQUERY;

  Definition of package inside:

  create or replace PACKAGE BODY MY_SQUERY

  AS

  FUNCTION UDF_FORMQUERY)

  IN_CASEID VARCHAR2,

  IN_SRCLYR VARCHAR2,

  VARCHAR2 IN_SRC_CONDN( )

  RETURN VARCHAR2

  AS varSQLQuery VARCHAR2 (10000);

  END MY_SQUERY;

  your package definition is incorrect, you have included the part of the declaration of the variables of the function in the package definition. It should be like

  FUNCTION UDF_FORMQUERY)

  IN_CASEID VARCHAR2,

  IN_SRCLYR VARCHAR2,

  IN_SRC_CONDN VARCHAR2)

  RETURN VARCHAR2;

• PLS-00103: encountered the symbol "PREPARE" when expecting one of the following conditions:

  Hello

  Clearly, I'm doing a basic error.

  It is my statement prepared;

  Variable identifier;

  EXEC SQL PREPARE sql_stmt OF ' SELECT order_name, order_status OF orders WHERE order_id <: id; »

  I get the error on execution of the file using @/dir/file.sql

  PLS-00103: encountered the symbol "PREPARE" when awaits an of the

  Next:

  What is the problem?

  concerning

  Sameer

  Yes. You are right. A thorough SQL more guide and modified the SQL for this

  Variable identification number

  VARIABLE order_info REFCURSOR

  Begin

  : id: = 20000;

  Open: order_info to SELECT order_name, order_status OF orders WHERE order_id<>

  End;

  It works fine when it is called from the @/file/file.sql command prompt

  then I print command line order_info

  Thank you

  Sameer

• PLS-00103: encountered the symbol "PROCÉDURE" when expected

  Hi all

  LINE/COL ERROR

  -------- -----------------------------------------------------------------

  13/5 PLS-00103: encountered the symbol "BEGIN" when expecting one of

  What follows:

  language

  22/4 PLS-00103: encountered the symbol "PROCÉDURE" when expected

  of the following:

  not end up dominant static of final instantiable order pragma

  manufacturer membership card

  The symbol "static" was substituted for "PROCEDURE continue.

  create or replace package xx_extract
  as
  procedure xxc_process;
  procedure xxc_get(in_id     emp.empno%type,
                    in_number emp.deptno%type);
  end ;
  

  create or replace package xx_extract
  as
  cursor v_cursor
  is
  select empno,deptno
    from emp a,dept d
   where e.deptno=d.deptno;
   v_cursor_rec  v_cursor%rowtype;
   v_in_number emp.empno%type;
   v_in_date   emp.hiredate%type;
     procedure xxc_process 
     is
      Begin
          xxc_get(v_cursor_rec.empno,v_cursor_rec.deptno);
           open v_cursor;
         loop
           fetch v_cursor into v_cursor_rec;
           exit when v_cursor%notfound;
         end loop;
      close v_cursor;
     end xxc_process;
     procedure xxc_get(in_id     emp.empno%type,
                       in_number emp.deptno%type)
     is
      begin
       select empno,hiredate
          into v_in_number,v_in_date
         from emp
        where empno=to_char(in_id)
          and deptno=to_char(in_number);
        EXCEPTION
            WHEN NO_DATA_FOUND THEN
                    in_id := NULL;
                    in_number := NULL;
     end xxc_get;
  end xx_extract;
  

  994122 wrote:

  The code below displays all values where I called the procedure before the stmt Open why? Can u please explain.

  PROCEDURE xxc_process

  IS

  BEGIN

  xxc_get (v_cursor_rec.empno, v_cursor_rec.deptno);

  OPEN v_cursor;

  because v_cursor_rec.empno and v_cursor_rec.deptno are empty at this time

  994122 wrote:

  But as suggested as Roger why we named as below? I need the output when I ran the package and I don't want to call (run) as below

  Start

  xx_extract.xxc_process ();

  end;

  the begin... end; box IS running the package, what you do with the create command are CREATION (storage) a package.

• PLS-00103: encountered the symbol "SYS_REFCURSOR" during the expected in the following way:

  Hey Geeks,

  I am trying to execute the procedure from the SQL Developer, but these errors are coming. What can I do wrong here...

  Procedure works fine when I run the compilation and debugging mode. But I need to put later in the c# code.

  SET serveroutput on;

  DECLARE

  OutParam1 to SYS_REFCURSOR;

  OutParam2 ON Varchar;

  BEGIN

  / * Call procedure package * /.

  SPAT_QUERY. SP_VALIDATERULES (9, 'BIS2015001', OutParam1, OutParam2);

  / * Display parameters * /.

  dbms_output.put_line ('OutParam1: ' |) OutParam2);

  END;

  -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Error report-

  ORA-06550: line 3, column 20:

  PLS-00103: encountered the symbol "SYS_REFCURSOR" during the expected in the following way:

  := . (@ %; not null default range character)

  06550 00000 - "line %s, column % s:\n%s".

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  -Procedure below:

  create or replace PACKAGE SPAT_QUERY of BODY

  AS

  / * Declare a global variable to hold the result of the Validation. */

  valResult varchar (10);

  PROCEDURE SP_VALIDATERULES)

  IN_RQST_NUM NUMBER,

  IN_CASEID IN VARCHAR,

  OUT_REFCURSOR ON SYS_REFCURSOR,

  OUT_VAL_RSLT ON VARCHAR

  )

  AS

  p_rc sys_refcursor;

  I have NUMBER: = 0;

  / * Logical query - a loop in the Table of RULES based on request NUM * /.

  BEGIN

  FOR rec IN (SELECT * FROM T_RULES where RQST_NUM = IN_RQST_NUM)

  LOOP

  i: = i + 1;

  SP_GETSECTS (IN_CASEID, rec. LYR_TX, rec. TRGT_TX, rec. EXCPTD_RSLT_CD, p_rc);

  OUT_VAL_RSLT: = valResult;

  END LOOP;

  END SP_VALIDATERULES;

  Thank you

  Ken

  in anonymous block, variables cannot be defined in the form. IN and OUR are not variable parameters type

  Change your code to

  DECLARE

  OutParam1 SYS_REFCURSOR;

  OutParam2 Varchar;

• Error (34.2): PLS-00103: encountered the symbol "END" when you try to compile the procedure.

  Hello

  I get the following error when I try to compile the procedure. I call a package inside this simple procedure. Not sure where I do worng. Here is the error I get.

  Error (34.2): PLS-00103: encountered the symbol "END"?

  Here is my code

  create or replace PROCEDURE BATCH_JOB_CAC_SP

  (

  vstatus OUT NUMBER)

  AS

  vloadserver global_name.global_name%TYPE: = get_dbservername;

  vuseridmod CONSTANT VARCHAR2 (15): = 'SYSTEM '.

  vloadname CONSTANT VARCHAR2 (30): = "BATCH_JOB_CAC_SP";

  v_cnt_upd NUMBER: = 0;

  vrunid NUMBER;

  v_spoutput VARCHAR2 (150);

  CURSOR job_cac

  IS

  SELECT NumCli, job_cac FROM batch_job_cac, batch_recid, jobnum;

  BEGIN

  I'm in job_cac LOOP

  job_cac_pkg.job_cac_valid_sp (i.custnum, i.jobnum, v_spoutput);

  CASE v_spoutput

  WHEN "1" THEN DBMS_OUTPUT. Put_line ('update job ACC');

  WHEN "2" THEN DBMS_OUTPUT. Put_line ('update job ACC');

  WHEN '3' THEN DBMS_OUTPUT. Put_line ('can not update working ACC');

  OF ANOTHER DBMS_OUTPUT. Put_line (v_spoutput);

  END CASE;

  END LOOP;

  EXCEPTION

  WHILE OTHERS THEN

  IF job_cac % isopen THEN

  CLOSE Job_cac;

  END IF;

  ROLLBACK;

  vStatus: = 1;

  LOG_ERROR_SP_NM (vLoadServer, vLoadName, SQLCODE, SQLERRM, vUserIdMod);

  END;

  END BATCH_JOB_CAC_SP;

  Thanks for your help.

  Hello

  You have 2 statements END at the bottom of your code, but only 1 BEGIN statement earlier.

  Losing one of these END States.

• has encountered an error "PLS-00103: encountered the symbol"CREATE"when expec".

  Hi all
  
  I am creating a procedure and try to use the temporary table...
  
  Here is the code:
  --------------------------------------------------------------------------------------------------------------------------------------------
  PROCEDURE P_PARENT_TREE
  (
  topic_id_in in NUMBERS
  topic_hierarchy_details_out ON SYS_REFCURSOR
  ) IS
  
  temp_children_level topic_children.children_level%TYPE;
  temp_children_id topic_children.children_id%TYPE;
  temp_topic_id topic.topic_id%TYPE;
  
  CURSOR c_child_level IS
  SELECT children_level, children_id
  OF topic_children
  WHERE children_id = topic_id_in;
  
  BEGIN
  
  OPEN c_child_level.
  EXTRACT c_child_level INTO temp_children_level, temp_topic_id;
  CLOSE C_child_level;
  
  Topic_child CREATE TEMPORARY TABLE IF NOT EXISTS
  (t_topic_id, NUMBER, NUMBER, children_seq NUMBER of t_children_id);
  
  WHILE temp_children_level > 0
  LOOP
  INSERT INTO topic_child (t_topic_id, t_children_id, children_seq)
  values)
  SELECT topic_id, children_id, children_level
  OF topic_children
  WHERE children_id = temp_topic_id);
  
  temp_children_level: = temp_children_level - 1;
  END LOOP;
  
  OPEN FOR Topic_hierarchy_details_out
  Select * from topic_child;
  
  END P_PARENT_TREE;
  
  END TOPIC_PKG;
  
  --------------------------------------------------------------------------------------------------------------------------------------------
  
  the error "PLS-00103: encountered the symbol"CREATE"when expec...
  no idea why? or can be is there another way to write this query

  Can you post some examples of data? And the expected results?
  Looks like you can use a hierarchical query (START WITH... CONNECT BY), and that you do not have a Temp table (like I said before very rare in Oracle)

• PLS-00103: encountered the symbol 'NUMBER' when awaits a the follow

  Hi, I have this error:-
  
  OS: xp
  Oracle 8i
  
  SQL > Create or replace procedure Balance_chk is
  mclient_no 2 number (5);
  3 mbal_due number (10.2);
  4 less_than_min_bal
  number (3) add_amt 5.
  min_bal 6 number (7.2);
  7. start
  8 add_amt: = 500;
  9 min_bal: = 2000;
  10 mClient_no: = & mClient_no;
  11. Select bal_due in the Client_mast mbal_due where client_no = mClient_no;
  12 if mbal_due > = Min_bal then
  13 update client_mast set bal_due = (mbal_due + add_amt) where client_no is mclient_no;.
  14 end if;
  15 exception
  16 when less_than_min_bal then
  17 dbms_output.put_line (' balance ' | bal_due);
  18 end;
  19.
  Enter the value for mclient_no: 10001
  10 old: mClient_no: = & mClient_no;
  new 10: mClient_no: = 10001;
  
  CAUTION: Procedure created with compilation errors.
  
  SQL > show error
  Errors in PROCEDURE BALANCE_CHK:
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  5/9 PLS-00103: encountered the symbol 'NUMBER' when waiting for an a
  What follows:
  := . (@ %; not null default range character)
  The symbol ': = ' was replaced by 'NUMBER' to continue.

  you are missing; at the end of the line 4

• PLS-00103: encountered the symbol "VARCHAR2".

  Hi all

  on 11.2.0.4 on Win 2008

  Executing steps I get PLS-00103: encountered the symbol "VARCHAR2":

  DECLARE

  BEGIN

  plsql_block VARCHAR2 (500);

  plsql_block: = ' BEGIN create_dept (:,: b: c: d); END;';

  END;

  /

  ORA-06550: line 3, column 13:

  PLS-00103: encountered the symbol "VARCHAR2" when expecting one of the following conditions:

  := . ( @ % ;

  The symbol ': = ' has been substituted for "VARCHAR2" continue.

  Thank you for helping me see my error.

  Hello

  Variable declaration is declared between the two and start. Personally, I prefer the initialization of variables there.

  DECLARE

  plsql_block VARCHAR2 (40): = ' start create_dept (:,: b: c: d); end;';

  BEGIN

  ...

  You did not request this, but I'm telling you anyway

  I also use declare start the buildings inside the code to make the code more manageable, compact and clear (because I have a short memory, I need to see everything in one small scope at a time). Then, the blocks are easy enough to separate function or procedure if necessary.

  set serveroutput on
  declare
    x number := 0;
  
    procedure step(p1 number) is
    begin
      dbms_output.put_line('Step ' || p1);
    end;
  begin
    step(x);
  
    declare
      y number := x + 1;
    begin
      step(y);
    end;
  
    declare
      z number := x + 2;
    begin
      step(z);
    end;
  
  end;
  /
  
  anonymous block completed
  Step 0
  Step 1
  Step 2
  

• PLS-00103: encountered the symbol "end-of-file.

  Hello
  on the 11g R2, I get the following error:

  SQL> declare
    2      m_clob  clob;
    3  begin
    4      select
    5          sql_fulltext
    6      into
    7          m_clob
    8      from
    9          v$sql
   10      where
   11          sql_id = '0cx8yq5fnry'
   12      and child_number = 0
   13      ;
   14
   15      dbms_output.put_line(m_clob);
   16    /
      dbms_output.put_line(m_clob);
                                  *
  ERROR at line 15:
  ORA-06550: line 15, column 33:
  PLS-00103: Encountered the symbol "end-of-file" when expecting one of the
  following:
  ( begin case declare end exception exit for goto if loop mod
  null pragma raise return select update while with
  <an identifier> <a double-quoted delimited-identifier>
  <a bind variable> << continue close current delete fetch lock
  insert open rollback savepoint set sql execute commit forall
  merge pipe purge

  Thanks for help.

  Start
  do something;
  END;
  */*

• Compilation failure, line 5 (11:02:10) PLS-00103: encountered the symbol "POR".

  I want to send an e-mail message using pl/sql and write the following code, but while compling, error must be occure
  "Failure of compilation, line 5 (11:02:10).
  PLS-00103: encountered the symbol "PortNumber" when expecting one of the following values:; "with authid as order of external assistance cluster parallel_enable deterministic result_cache pipeline."
  
  
  
  create or replace procedure SEND_TEST_EMAIL
  (mailhost IN VARCHAR2 default 'smtp.exchangesetup.com',
  sender VARCHAR2 default '[email protected] '.
  recipient in VARCHAR2 default '[email protected]')
  port_number in default number 25
  )
  is
  BEGIN
  8 mail_conn: = UTL_SMTP. OPEN_CONNECTION (mailhost, 25);
  9 UTL_SMTP. HELO (mail_conn, mailhost);
  10 UTL_SMTP. MAIL (mail_conn, sender);
  11 UTL_SMTP. RCPT (recipient, mail_conn);
  12
  13 UTL_SMTP. OPEN_DATA (mail_conn);
  14 UTL_SMTP. WRITE_DATA (mail_conn, "it is a test message.");
  15 UTL_SMTP. WRITE_DATA (mail_conn, 'It is the 2 line.');
  16 UTL_SMTP. CLOSE_DATA (mail_conn);
  21 UTL_SMTP. Quit (mail_conn);
  22 EXCEPTION
  23 SO THAT OTHERS THEN
  25 NULL;
  26 END;

  NOT TESTED
  Describe below in the part of the statement

  mail_conn UTL_SMTP.CONNECTION;     
  

  as

  CREATE OR REPLACE PROCEDURE SEND_TEST_EMAIL
  (mailhost IN VARCHAR2 DEFAULT 'smtp.exchangesetup.com',
  sender VARCHAR2 DEFAULT '[email protected]',
  recipient IN VARCHAR2 DEFAULT '[email protected]',                               -----code change , removed ')' add ','
  port_number IN NUMBER DEFAULT 25
  )
  IS
  mail_conn UTL_SMTP.CONNECTION;                                                                                   -----code change added mail_conn UTL_SMTP.CONNECTION;
  BEGIN
  mail_conn := UTL_SMTP.OPEN_CONNECTION(mailhost, 25);
  UTL_SMTP.HELO(mail_conn, mailhost);
  UTL_SMTP.MAIL(mail_conn, sender);
   UTL_SMTP.RCPT(mail_conn, recipient);
   UTL_SMTP.OPEN_DATA(mail_conn);
  UTL_SMTP.WRITE_DATA(mail_conn, 'This is a test message.' );
   UTL_SMTP.WRITE_DATA(mail_conn, 'This is line 2.');
   UTL_SMTP.CLOSE_DATA(mail_conn);
   UTL_SMTP.QUIT(mail_conn);
  EXCEPTION
   WHEN OTHERS THEN
   NULL;
   END;
  

• PLS-00103: encountered the symbol "ALTER".

  I receive he following error when I run this script
  
  DECLARE
  vcount NUMBER (1);
  BEGIN
  SELECT count (*) IN the all_col_comments vcount
  WHERE owner = 'myUser' and Table_Name = 'table1' and column_name = 'col1 ';
  IF vcount = 0 THEN
  ALTER TABLE myUser.table1
  ADD (col1 varchar2 (1) DEFAULT ' is NOT NULL);
  END IF
  END;
  
  Error report:
  ORA-06550: line 7, column 4:
  PLS-00103: encountered the symbol "ALTER" when expecting one of the following conditions:
  
  (begin case declare exit for goto if loop mod null pragma
  raise return select update while < ID >
  < between double quote delimited identifiers of > < a variable binding > < <
  continue the narrow current delete fetch locking insert open rollback
  savepoint sql set run commit forall fusion pipe purge
  The symbol 'lock has been inserted before "ALTER" to continue.
  ORA-06550: line 8, column 11:
  PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:) "
  
  , in
  ORA-06550: line 8, column 47:
  PLS-00103: encountered the symbol "NULL" when expected in the following way:
  
  as like2 like4 likec between Member submultiset
  06550 00000 - "line %s, column % s:\n%s".
  * Cause: Usually a PL/SQL compilation error.

  There is no need to pack the column names in the TOP, the names of the objects are stored by default at the top of case. Isn't that quoted strings must be upper case, but yes, your last block is basically my second block and will correctly find the column already exists when it is executed a second time. Your original, with tiny strings cited would never return a line fomr the query on the column, so would attempt to add the column each time.

  SQL> select table_name, column_name
    2  from all_tab_columns
    3  where owner = 'ops$oracle' and
    4        table_name = 'table1' and
    5        column_name = 'col1';
  
  no rows selected
  
  SQL> select table_name, column_name
    2  from all_tab_columns
    3  where owner = 'OPS$ORACLE' and
    4        table_name = 'TABLE1' and
    5        column_name = 'COL1';
  
  TABLE_NAME                     COLUMN_NAME
  ------------------------------ ------------------------------
  TABLE1                         COL1
  

  See the difference?

  (I only did the drop table so that I can redo the pl/sql block from scratch to show that was) the first time he ran he added the column and b) for subsequent executions, he did not attempt to add the column because it exists, unlike your first display.

  However, scripts that add columns to tables should, in general, not be something that is executed repeatedly. More often by adding a column to a table would be part of a process of controlled upgrade, and most of the time, the fact that a 'new' column already exists in the database before the upgrade seems to indicate a problem with the upgrade process, and probably not something to be ignored in silent mode.

  John

• PLS-00103: encountered the symbol

  Hello
  in 10g R2, what's wrong with my code:

  SQL> DECLARE
    2   my_task_name VARCHAR2(30);
    3   my_sqltext   CLOB;
    4  BEGIN
    5   my_sqltext := 'SELECT m.tablespace_name,        m.used_percent,         (m.tablespace_size - '                      ||
    6                 'm.used_space)*t.block_size/1024/1024 mb_free  FROM  dba_tablespace_usage_metrics m, dba_tablespaces t' ||
    7                 'WHERE :1 != 'BASIC'    AND t.tablespace_name = m.tablespace_name';
    8
    9   my_task_name := DBMS_SQLTUNE.CREATE_TUNING_TASK(
   10           sql_text    => my_sqltext,
   11           bind_list   => sql_binds(anydata.ConvertNumber(100)),
   12           user_name   => 'SCOTT',
   13           scope       => 'COMPREHENSIVE',
   14           time_limit  => 60,
   15           task_name   => 'my_sql_tuning_task',
   16           description => 'Task to tune a query on a specified employee');
   17  END;
   18  /
                 'WHERE :1 != 'BASIC'    AND t.tablespace_name = m.tablespace_name';
                               *
  ERROR at line 7:
  ORA-06550: line 7, column 30:
  PLS-00103: Encountered the symbol "BASIC" when expecting one of the following:
  * & = - + ; < / > at in is mod remainder not rem
  <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
  LIKE4_ LIKEC_ between || member SUBMULTISET_
  The symbol "* was inserted before "BASIC" to continue.

  Thanks for the help.

  You have a string in quotation marks in a quoted string.

  Whenever you do this, you need to double the inner quotes.

  SQL> select 'where blah != 'BASIC' and' from dual;
  select 'where blah != 'BASIC' and' from dual
                              *
  ERROR at line 1:
  ORA-00923: FROM keyword not found where expected
  
  SQL> select 'where blah != ''BASIC'' and' from dual;
  
  'WHEREBLAH!=''BASIC''AND'
  -------------------------
  where blah != 'BASIC' and
  

• ORA-06550 pls-00103 encountered the end symbol of file

  HII

  the procedure below compiles well.

  CREATE OR REPLACE PROCEDURE BG. FIND_DUP (EMP_CODE NUMBER, MAIN_EMP_CODE NUMBER) IS

  CURSOR C1 IS

  SELECT THE TABLE TABLE_NAME FROM USER_TAB_COLUMNS

  WHERE COLUMN_NAME = 'EMP_CODE. '

  AND UPPER (TABLE_NAME) <>UPPER ('PA_EMP_MERGE');

  V_T_NAME VARCHAR2 (2000);

  RESULT VARCHAR2 (1000);

  BEGIN

  OPEN C1;

  LOOP

  FETCH C1 IN V_T_NAME;

  WHEN EXIT C1% NOTFOUND;

  RESULT: = 'UPDATE'. V_T_NAME | ' SET EMP_CODE =' | EMP_CODE | "WHERE EMP_CODE =' | MAIN_EMP_CODE | « ; » ;

  RUN THE IMMEDIATE RESULT.

  END LOOP;

  CLOSE C1;

  END;

  -----------------------------------------------------------------------------------------------------------------------

  but when I try to run it gives me

  ORA-06550: line 1, column 26:

  PLS-00103: encountered the symbol "end-of-file" during the expected in the following way:

  ; < an ID > < a between double quote delimited identifiers of >

  The symbol ";" was replaced by "end-of-file" continue.

  -Im using oracle 10g

  Hello

  Do not put a semicolon at the end of the dynamic SQL statements.

  Instead of:

  RESULT: =... | MAIN_EMP_CODE | ';';

  Try:

  RESULT: =... | MAIN_EMP_CODE;

  You need a semicolon (outside the single quotes) to put an end to the assignment statement, but you don't need a semicolon (inside the single quotes) to put an end to the dynamic UPDATE statement.

  Whenever you make dynamic SQL code, ask someone (often yourself) "Is this really necessary?"

  Dynamic SQL is usually an accessory to the wrong table design.  Do you really need to have several tables that each must be updated in the same way, at the same time?  Are you create new tables so frequently that cannot keep track of their static code?

• Error: PLS-00103: encountered the symbol 'COLLECT' during the waited in the following way:. (, limiting the symbol)

  Hi all

  I get this error:

  • Error (55,45): PLS-00103: encountered the symbol 'COLLECT' during the waited in the following way:. (, limiting the symbol ".") has been inserted before 'COLLECT' to continue.

  While trying to create this procedure as below:

  If I run the query, I get the result, but in the procedure, I am trying to convert the OUT_REFCURSOR in a table, but this error.

  PROCEDURE SP_GETVALIDATE)

  IN_CASEID IN VARCHAR2,

  IN_REQID IN VARCHAR2,

  OUT_REFCURSOR ON SYS_REFCURSOR)

  AS

  IS OF TYPE RECORDTYPE

  RECORD (COL1, COL2 VARCHAR2 VARCHAR2);

  IS OF TYPE TABLETYPE

  THE REFTABLETYPE TABLE

  INDEX BY PLS_INTEGER;

  BEGIN

  OPEN for SELECT OUT_REFCURSOR c.RCRD_NO, c.STE_NO_TX DE T_LYR_STES c, p of LAND WHERE c.case_id = IN_CASEID AND p.L_NUMBER > 100;

  LOOP

  Look FOR the OUT_REFCURSOR BULK COLLECT outtable;

  WHEN the outtable OUTPUT. COUNT = 0;

  FOR indx IN 1... outtable. COUNTY

  LOOP

  dbms_output.put_line (outtable (indx). ) RCRD_NO);

  END LOOP;

  END LOOP;

  CLOSE OUT_REFCURSOR;

  END SP_GETVALIDATE;

  I could be wrong here.

  any help appreciated.

  Thank you

  Ken

  SEARCH OUT_REFCURSOR BULK COLLECT INTO outtable;

  You've had your BULK COLLECT and the wrong way around