Layouts and cards

Similar Questions

• Multiple, device based, grid and layouts of card collection?

  Here's the example scenario:

  A collection (or any shade of them) is referenced in two collections:

  -Default Tablet

  -Default phone

  Each default collection has a separate grid and put together in assigned map page and everyone looks good in their respective target devices class.

  But...

  Each of these collections that are referenced in both default collections, may have only one network and card assigned to their respective browse pages page layout. I say that we should be able to attach two grid and layouts of card of these collections. In this way we can assure you the pages to browse for the collection of the best look that they can in each device class. Or better yet: Stock Layouts reactive?

  We are working on adding support for this right now. For now, all you can do is create two collections different (one for the phone) and the other for the Tablet and apply then the two different page layouts to each.

  Edit: To clarify, I mean that we are working on adding the ability to specify a phone and tablet on a collection at the same time.

  Neil

• Tecra S1 - USB ports (all) and card reader does not

  Hello

  Just got a 2nd user Tecra S1. I was told that the drive SD card and USB ports do not work. Card reader (and card PCMCIA USB ports) works as well as the ps/2 port.

  Any ideas anyone? USB ports turn on power on indicators key USB etc but nothing is recognized under XP.

  See you soon

  Hello

  Maybe the USB ports listed in the devices with exclamation points Manager yellow. Did you check that?
  In addition, I would recommend updating the chipset driver. Visit the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you also received a Toshiba Recovery disk you may have to use it. The HARD disk will be wiped and XP will be installed all the drivers and tools.

  Good bye

• PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI

  Hi friends,

  I have PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI installed on the Windows XP desktop, that connected to the deducted Mikron camera.

  Recently I spend my Labview to 8.6, but the Mikron camera installation software does not work.

  How can I solve the problem?

  Anyone have the installation software (PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI)?

  Any suggestion is appreciated.

  Thank you

  Jack

  jackp6,

  For the 6205E you will need to download an install the Drivers OR-DAQmx which you can find here:

  NOR-DAQmx

  http://Joule.NI.com/nidu/CDs/view/p/ID/2214/lang/en

  The 1409, you must NEITHER IMAQ drivers that are included in the following the Acquisition of vision available here:

  NEITHER Vision Acquisition Software 2,010.08

  http://Joule.NI.com/nidu/CDs/view/p/ID/2137/lang/en

  Please let us know if you have any other questions.

  Kind regards

  Sam K

  Technical sales engineer

  National systems

• Why is his HRT and card spinning works not properly on the Collection of Microsoft Solitaire?

  Especially on TriPeaks and pyramid sound does not work for higher levels of score and card stop turning in midair.

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, the sound does not work while playing Microsoft Solitaire.

  1 did you changes to the computer before the show?

  2. the sound works well in the computer apart from the question of sound game?

  3. what operating system you have installed in the computer?

  Please follow the methods to check her solves the problem:

  Method 1: Scan SFC Run in the computer

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows system files

  http://support.Microsoft.com/kb/929833

  Method 2: Turn on your computer in a clean boot state in order to identify the cause

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup.

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support

• So, basically I just want to complain about windows 7 built in game "hearts", I don't like this layout of games under windows 7, they are too widely all over the screen! Microsoft should make an option to change the layout of cards the same as it was in w

  Well, as I mentioned above, layout of cards that bothers me in game of hearts of windows 7.

  http://input.Microsoft.com will accept suggestions for 7 soon.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• HOW smart card smart card slots look like? What are the differences between smart card slots and cards express?

  HOW smart card smart card slots look like? What are the differences between smart card slots and cards express?

  Hi Smitty,

  Yes, so ExpressCard is an interface that has a USB port to this topic where I can plug in external devices to be attached to my computer right? I did a search on google but could not find photo Card Slot smart. I need a picture to get an idea of how look like a smart card Slot.

  Next time try BING...

  http://tinyurl.com/95rgwxw
  http://tinyurl.com/9plc7zt

  http://tinyurl.com/8h96qsr

  Scroll to the left view (image 5)

  http://support.Dell.com/support/eDOCS/systems/latd610/en/ug_en/about.htm

• can you explain the purpose of layout and describe when it should be used? __

  can you explain the purpose of layout and describe when it should be used?

  http://www.Google.com
  Use a more specific search term. This will help you get a good answer for your homework. ;-) MS - MVP - Elephant Boy computers - don't panic!

• I want to make greeting cards, postcards and cards inspirational for sale. What is the best program?

  I am interested in making greeting cards, postcards and cards inspirational to sell, what program is the best?

  To create the illustrations and text for the map, you might consider using one of these programs:

  Photoshop

  Photoshop Elements

  Illustrator

  Guinot

• Difference between variable interface user layout and presentation of the add() method UI?

  Hello

  What is the difference between a variable user interface layout and presentation of the add() method UI?

  Presentation of the variable user interface is something like this:

  var windowResource = "palette {  \
      orientation: 'column', \
      alignChildren: ['fill', 'top'],  \
      preferredSize:[300, 130], \
      text: 'ScriptUI Window - palette',  \
      margins:15, \
      \
      bottomGroup: Group{ \
          cd: Checkbox { text:'Checkbox value', value: true }, \
          cancelButton: Button { text: 'Cancel', properties:{name:'cancel'}, size: [120,24], alignment:['right', 'center'] }, \
          applyButton: Button { text: 'Apply', properties:{name:'ok'}, size: [120,24], alignment:['right', 'center'] }, \
      }\
  }";
  
  var win = new Window(windowResource);
  
  win.show();
  

  presentation of the UI Add() method is something like this:

  var w = new Window('dialog', 'Random Number Generator');
  var btn_group = w.add('group'),
      btn_ok = btn_group.add('button', undefined, 'Ok');
  
  w.show();
  

  Thank you!

  Since the Guide Javascript Tools on the specifications of the resource (you're high example on the page):

  You can create one or more UI both elements by using a resource specification. This specially formatted string provides a simple and compact of the creation of an element, including any container element and its constituent elements. The resource-specification string is passed as a parameter to the constructor function Window() or add().

  The general structure of a resource specification is a specification of item type (for example, dialog box).

  followed by a pair of curly braces surrounding one or more property definitions.

  myResource var = 'dialogue {control_specs} ";

  var myDialog is new window (myResource);.

  The controls are defined as properties in windows and other containers. For each control, give the name of the control class, followed by the properties of the control between braces.

  I had trouble getting the resource specifications to work - probably just didn't make the time to understand. A few differences is that some of the properties that they put in the resource specifications in brackets after the element will not work in the other method, if you do it this way. You normally have to make a second line and add this property. I'm not sure of the first method, but the second is the function object, and you can use the structure of the object (object, nextProperty, etc.) or set a variable to represent the object. In most of the scripts that I write, I use variables and give them a name such as:

  myCheckBox var = dlg.inSomeGroup.add ('checkbox', undefined, "text box '");

  myCheckBox.name = "maCaseACocher";

  By doing this, I can create a recursive function that goes through the entire user interface and retrieves the values of the elements and writes this information to an xml file. Including the names allows the script to identify which variable to control / it is in the xml file, so that it can be reassigned to proper control. I have not tried this with the method of specifications for resources, so I don't know if it will work with it.

• Impossible to draw AP Div Panel to insert, as described in the tutorial "classroom: basic Site layout and Navigation in Dreamweaver.

  I tried to perform the draw AP Div from the Panel to insert as described in the tutorial "classroom: basic Site layout and Navigation in Dreamweaver", but this option is not available/visible since my last update t CC of Dreamweaver. The only notable thing is that the trainer uses a Mac version of the software. Help!

  CS4 is 6 years old and more.  Much has changed in the web standards and Dreamweaver since then.

  APDivs have never been a good or reasonable way to make primary models.  Today, they are downright impossible in sensitive web designs as in APDivs content is removed from the normal flow of the document.  See the links below for more details on why to avoid the APDivs.

  http://www.apptools.com/examples/pagelayout101.php

  http://CSS-tricks.com/CSS-beginner-mistakes-1/

  If you work with DW CC, you find tutorials to match the version of your product.  CS6 differs greatly from CC and CC 2014.

  Create your first web site in DW CC-

  https://helpx.Adobe.com/Dreamweaver/learn/tutorials/how-to/first-website-part1.html

  Nancy O.

• Page layout and CSS

  Hi all
  I'm playing with layouts and try to understand them. Read a lot about them, but I guess I'm getting confused.
  
  So, I copied an existing css page and changed only 1 element, just to see if I could make it work.
  
  I copied a page template and created a new one, and then I transferred my CSS file and I've changed the reference on the page uploaded to
  
  < link rel = "stylesheet" href = "" APP_IMAGES #wally.css "type =" text/css"/ >"
  
  But when I open the page, it looks like I see the change for stuffing, I added, but the bottom and all are white. In addition to downloading and making reference to the CSS in a page template, is there any other requirements? I guess if I did install to use the blue background and did not make changes that it would use the blue background. I need to change the references to the directory of themes on the hosted server? I think I need to change the references but not sure, any help would be appreciated.
  
  http://Apex.Oracle.com
  my workspace is wfsteadman
  username demo
  password demo
  
  I copied a model page and then replaced the reference to the stylesheet with the reference APP_IMAGES. If you click on one of the links that they still have css installed and they work fine. I can, to reference the internal colors and images in the downloaded CSS Style sheet?
  
  Thank you
  Wally

  For example, in my theme, the css is here:

  http://Apex.Oracle.com/i/themes/theme_1/CSS/theme_4_0.CSS

  so with the following: url (.. /images/BG-footer.gif)

  is really pointing to a file which is: http://apex.oracle.com/i/themes/theme_1/images/bg-footer.gif

  for example, you could do like: url(/i/themes/theme_2/images/bg-footer.gif)

  Van
  Trent

• Aspect ratio in layout page/cards

  If I have 1 x 1 card and I have 1 column in my layout, a 4:3 picture format should not fill the full screen for this 1 card?

  Also, how can I get DPS swipe and stop at each article instead of infinite scrolling image? I have 5 items under a single collection slide vertically and never stops to an image to the bottom.

  Hello

  AR is width: height. So if you are thinking about an iPad for example, it should be about 3:4. (higher than it is wide). For the moment, we do not have the ability to specify a card to be exact "full screen", but it's on our list as future improvements.

  Similarly, we have not yet the ability to specify cards 'snap' (slaughter to each card). Browse the pages are just good scrolling for now.

• Layout and HGroup vertical centering

  I'm running a Flex 4 application with a Skinnable container with an applied appearance. The container uses a VerticalLayout (for expand/collapse with loaded text). When I try to focus a button down using a HGroup with a HorizontalCenter property, it does not and the button is aligned with the left...

  Code below...

  
  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:fx s:SkinnableContainer ' http://ns.Adobe.com/MXML/2009 "
  xmlns:s = "library://ns.adobe.com/flex/spark".
  xmlns:MX = "library://ns.adobe.com/flex/mx".
  creationComplete = "fireEvent () '"
  skinClass = "com.cairngorm.personalization.skins.Bac kgroundRectDynamic"
  >

  < fx:Style source = "assets/Main.css" / > "

  
  < s:layout >
  < s:VerticalLayout / >
  < / s:layout >

  
  < s:Label id = "header".
  Text = "add photos".
  width = "250" height = "100%".
  styleName = "h2left" / >

  
  < mx:Spacer height = "15" / >

  < s:RichEditableText id = "msgbody".
  width = "250" height = "110%".
  Text = "your card cover must have a photo. Drag and drop your photo into your card. »
  styleName = "h4".
  verticalAlign = "top".
  Editable = "false" / >

  < mx:Spacer height = "10" / >

  
  < s:HGroup horizontalCenter = "0" >
  < s:Button skinClass = "com.cairngorm.personalization.skins.Btn PrimarySkin" label = "OK" click ="popOkClick (); "buttonMode ="true"mouseChildren ="false"id ="okBtn"/ >
  < / s:HGroup >

  < / s:SkinnableContainer >

  Hello

  HorizontalCenter won't work in VerticalLayout.

  Change this line

  TO

• Firefox is not in the new layout, and I wish it were.

  I just installed firefox and I know that most people like the former route with the edit veiw history bookmarks tools and help file, but I liked the new layout with the orange button that says firefox and it was almost primarily as a tab that had all the options and I love this waaayy better, but now firefox is in the former route and I do not. in any case, I can switch to the new? BTW firefix is also updated.

  You get the orange Firefox menu button when the menu bar is hidden.

  • Firefox menu button > Options
  • View > toolbars (press F10 to display the menu bar)
  • Right click on empty toolbar space

  See also:

  • https://support.Mozilla.org/KB/how-do-i-get-Firefox-button
  • https://support.Mozilla.org/KB/menu+bar+is+missing

  Press the F10 key or press the Alt key to bring up the hidden 'bar menu' temporarily if necessary.