Multiple, device based, grid and layouts of card collection?

Similar Questions

• How to operate the laboratory discovered multi-function synchronization with multiple devices and change the recording time?

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (1 unit). I try to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. In this library, "des_v2_Multi-Funtion_Synch I - AO.vi" is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much!

  Sincerely,

  Jie

  Hello Jshen6,

  You can have different examples of VI if you do not use the same version of LabVIEW. I am currently operating on LabVIEW 2013 SP1. Whatever it is, this article should be useful to you that he describes in detail how to synchronize multiple tasks of series M.

• I use lightroom on my laptop, and now I want to download on my desktop that I have multiple devices to the original purchase.  How can I download it for my office?

  I use lightroom on my laptop, and now I want to download on my desktop that I have multiple devices to the original purchase.  How can I download it for my office?

  You install programs exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  .

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• I am looking to buy the package of photography and I have 2 PC at home - can I install this on multiple devices?

  I am looking to buy the package of photography and I have 2 PC at home - can I install this on multiple devices?

  Yes, you can install all software from Adobe on 2 computers which are mainly used by the same person but not both computers at the same time.

  This allows you to install on your desktop for work from home / office and a laptop when away from your home/office. But you cannot use LR and PS on both computers at the same time.

• I am a student with a desktop computer and a laptop - can I use a license student on multiple devices.

  I am a student with a desktop computer and a laptop - can I use a license student creative cloud / log on multiple devices.

  Hi,

  CC Adobe license can be activated on 2 machines using the same Adobe ID.

  Reference: licenses and terms of use | Adobe

  Kind regards

  Sheena

• How do the DAQmx sync with multiple devices

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (device). I tried to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. AI des_v2_Multi-Funtion_Synch - AO.vi is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much.

  Sincerely,

  Jie

  You have a cable RTSI connecting PCIe cards? In order for them at the time of sharing and triggers, you must install a RTSI cable like the one below.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/12631

  What are the exact synchronization requirements you need for your tasks?

• best practices for the structure of the code control multiple devices in a sequence-step 2

  I have a question about code architecture and to get multiple devices controlled and synchronized for an experience. It is an 'architecture' - type application, so I hope for some suggestions on how to proceed.

  I run an experience in which I order 2 NI PCI-6733. I will soon add a Tektronix AFG 3022 B and have long been turned off the opportunity to rewrite my code labview from the ground upward. I inherited from a previous search, and although functional, I want to make it easier to modify and divide into sub - VI and these. Link to the current program (labview 8.6.1) is here if you do not want to see the code that is currently used and Subvi is in a zip file. The current version of experience consists of one stage, all writing the data for PCI cards is saved for the end. I need to change that in my configuration again well.

  The new experience consists of 2 steps. The first will take place (loop an array of output for PCI cards) until he heard a 'real' another computer (connected via TCP). When you do that, it should go to step 2 and run a sequence (usually 10 ^ 5 timeunits of length, where the unit of time is 0.1 ms) which refers to two PCI, the AFG 3022 B cards and with the flexibility to add more devices in the future.

  The most popular would be structural advice. How to organize the screw, if it's good to use a VI 'master' that would control the two sub - VI phase 1 and 2, etc...  Feel free to ask for more details if it helps clarify my question. Thank you!

  Such programs typically use a kind of State machine.  You will find many tutorials on LabVIEW state machines in these forums or forums of LAVA.  If you do a rewrite, I also recommend that consider you the LabVIEW classes.  They help modularize your code and do more reusable subparts.  You can end up with less to maintain, accordingly.

  You can also consider TestStand.  It was designed to perform sequences of tests, so can make your life easier.  It would be also exaggerated gross.

  Let us know if you encounter any problems with the machinery of State or classes.

• Windows 7 network can't see multiple devices on the network

  Hi all.  I'm about to leave my hair on this issue - I hope someone can prevent the horror that would be me without hair.

  I am running Windows 7 Home Edition on a personal computer that is connected via cable to a router UVerse also providing my home with wireless services.

  A few months ago, I could see - of my PC, network and devices and printers - the two PS3, XBox systems and Samsung TV devices that are connected to my wireless network.  Apparently randomly, my computer has ceased to be able to see these devices.  After trying everything I could think of, I've finally reformatted the system (before Christmas) and everything was good again until last week when my computer stopped once more to see these devices.  I * really * don't want to reformat my system again...

  Here are some details on where I started after the last reformat:

  The PC is connected to a homegroup.

  The PC has a wired connection to the router.  The devices are connected over wireless.

  The firewall is turned on.

  AVG anti-virus has been activated.

  Network discovery, file and sharing printers and streaming media are all enabled.

  Password sharing is disabled.

  Devices could stream Netflix/Hulu as well as files on my computer (using the PlayOn Server - I've never used WMP).

  Now my devices can still Streaming Netflix/Hulu, but not the files on my computer.  The PC can't see the devices and the devices cannot see the PC.

  Here is a list of most of the things I've tried to solve (although I've done so many things, I probably don't forget some):

  I added the PC to the wireless network, so now that it is connected both cables and wireless.  I even tried to fill these connections, although I removed the bridge when I saw that there was no difference.

  I have disabled the firewall completely.

  I disabled the AV entirely.

  I switched a residential group to a working network and vice versa.

  I gave you the assigned IPs devices in the router configuration.

  I've rolled back all the windows updates installed since the last time the devices showed in the PC network.

  I've removed the devices on the network, reconnected the and reconfigured to ensure that they have the media streaming (if applicable).

  I did several reboots the PC, the router, and devices.

  I added the PlayStation Network and XBOX Live and applications hosted under NAT/game on my router.

  I have enabled file sharing for devices that use 40 encryption or 56-bit.

  Additional troubleshooting information:

  When I try to add a device using the Add Device dialog box, no device never shows.

  Under media streaming options, when I look at instruments under all the networks and Local network, no unknown device only shows (even in WMP).  All devices that * show are already set to 'allow '.

  If I have access to my router configuration, the devices will appear as connected.

  I can ping devices from the PC.

  I searched endlessly on the Internet (including other threads on this forum) and have tried all of the suggestions I thought.  The only thing I can't do is activate uPNP on my router because routers Uverse do not offer this option.  However, I don't think that it's important because my PC could see these devices for some time after my last reformat and made no changes to the configuration of the router.

  Because multiple and different wireless devices are involved, and because a reformat solves the problem, in my view, it is a Windows problem, but I can't understand what to change on my system to make things work again.

  Anyone have any ideas?

  Hello

  Thanks for posting your query in Microsoft Community.

  It's a shame that you have to format the system first and now, the problem still persists. I really appreciate the efforts made to try to resolve the problem. This can be due to any dispute of third party software due to which the connection failed. I suggest you follow the methods below and check.

  Method 1: Run the network troubleshooter to diagnose the problem.

  Run the network troubleshooter

  Method 2: start the computer in safe mode with network and then perform the clean boot.

  Step 1: restart the computer in safe mode with network and check if the problem occurs, proceed as in the link:

  See: , start your computer in safe mode

  Step 2: If the safe mode with network works, perform clean boot and check if any third-party application is causing problem.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 3: To enable the network devices to display on the network map, they must meet four requirements:

  • Must be a HOME network or work: Mapping network only display the devices connected to a HOME network or WORK location. Devices connected to a network PUBLIC or FIELD cannot be displayed using the network card.
  • Devices must be DETECTABLE: The network discovery setting allows devices to be able to be seen by other devices on the same network. For more information, please consult: , enable or disable network discovery
  • Devices must comply with the LINK LAYER TOPOLOGY DISCOVERY Protocol: Topology Discovery LLTD (Link Layer) is a protocol developed by Microsoft to enable networked devices to 'discover' each other. If a device does not use the LLTD protocol so it can not be displayed in the network map. Windows 7 computers have the LLTD protocol implemented.
  • LLTD must be enabled on your LAN connection properties: The Link Layer Topology Discovery Mapper of e/s driver and the Link Layer Topology Discovery responder must be enabled on your local area connections properties panel.

  To check LLTD is enabled, you can refer to the following steps:

  a. Select open network and sharing Center by clicking on the icon of your network down to the right of your task bar:

  b. now, click connect to the Local network

  c. now, click on Properties

  d. ensure that two LLTD options below are selected (by default, these options are still enabled in Windows 7).

  From now to try the methods above and let us know the status. We will be happy to help you further.

• Difference between static and dynamic encryption card

  Anyone tell me the difference between static and dynamic encryption card?

  Hi Rodrigo,

  Public static crypto map - identifies by the peers and traffic to encrypt explicitly. Generally used to host some tunnels with different profiles and characteristics (different partners, sites, location)

  So, when you have the information of the two peers than what policies we're going to use, what is the IP on both devices we normally use static VPN.

  Crypto dynamic map - is one of the ways to accommodate peer sharing the same characteristics (for example, several offices of branches share the same configuration) or peers with dynamic IP addressing (DHCP, etc.)

  For more information, please visit:

  https://supportforums.Cisco.com/document/12013476/crypto-map-based-IPSec...

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• How to enable the use of multiple devices of cuda in Adobe AE?

  I had nvidia gtx 690 and nvidia gtx 760. They were both considered by the pilot 340.52 and we tick "use multiple GPU devices." Adobe AE CC 2014 so rendered was recognizing and using the two GPU devices. Then I replaced the gtx 690 with gtx 780Ti as a primary device. The driver does not have the option to use multiple devices and gpu in the AE preferences only the ti 780 is displayed.   When the don't return that this graphic card works. My question is how to use ti 760 & 780 two GPU in the rendering, as was the case with gtx 760 & 690?

  Thanks a lot for your help.

  Read the paragraph that begins with "If you have several installed GPU, GPU acceleration traced the beam 3D renderer will use the CUDA cores on each of them, as long as they are of the same level of CUDA computation" here:

  Features GPU (CUDA, OpenGL) in After Effects

• Download iOS 10 update once for installation on multiple devices via iTunes?

  I think remember me that it was possible and it was the best way. When I Googled it I am surprised to find there is no recent information on this (last year, although there are responses from 2012). I think this means 'no', but have not found the answer either.

  Then, download iOS updated once for installation on multiple devices via iTunes? As many people have multiple iOS devices that's probably a good idea.

  Almost certainly not.

  Each version of the product Apple has its own download.

• Given that I have updated to IOS 9.3.1 my iBooks PDF documents are uploaded to the cloud so that they can be shared on multiple devices, however when I rename a PDF, it comes back to the original name every time iBooks is updated.

  Given that I have updated to IOS 9.3.1 my iBooks PDF documents are uploaded to the cloud so that they can be shared on multiple devices, however when I rename a PDF, it comes back to the original name every time iBooks is updated.   Anyone who has similar problems and no one knows if there is a resolution?

  Thank you

  Johanine

  I hope that they address it quickly.  It is painful to have discovered my renowned PDFs are to difficult to identify file names their given by their authors.

• How can I get my account number of the device Apple Watch and iPhone 5?

  How can I get my account number of the device Apple Watch and iPhone 5?

  Try this below - it can help you!

  In the Apple Watch app on the iPhone, under My Watch > booklet & Apple pay > [your specific credit card]

• How can I set contact ringtone purchased on multiple devices?

  I have a few iPhones: 5, 6, and 6... How can I set ringtone touch purchased on iTunes Store on multiple devices?

  Because you can not download again for free, you will have to try to sync them with your devices, see this article:

  Download your purchases past - Apple Support

• AirPlay on multiple devices?

  In iTunes, 12.1 I was able to listen to my music anywhere in the home using AirPlay in iTunes. I could send a read track to several devices at the same time including Apple TV, and Airport Express... See screenshot:

  

  I've just updated to iTunes 12.3 but as you can see is more AirPlay icon... See following screenshot:

  

  The AirPlay button has been removed from the latest version of iTunes? Or is it just a mistake in the software on the 64 bit version of Windows?

  Can someone let me know if Airplay works for them in the latest version of iTunes if you please?

  Thank you...!

  Ken

  I 12.3.2 on a Win 7 PC at home and AirPlay works very well to multiple devices if you wish.

  First make sure your AirPlay devices are on and signed in the same network as your PC (make sure that no is a guest SSID if you have one, including the PC).  If everything that extract, try signing of colocation in iTunes and all the Apple TV you have, then reconnect (first, then other PC devices).  Sometimes this whip antenna emits.  If you still have difficulties, back up your iTunes library and then do a R & R of iTunes to see if something has been corrupted by the update.