My PC avtivity illegally monitored os. Help, please!

Similar Questions

• Why all of a sudden my monitor shows a double image of everything? I checked all the controls in the monitor. Have complete scan of the system. Restarted. Help please!

  Why my monitor see suddenly double images? A bit like a 3D cube. I checked all the settings in the screen itself. They are very good. A comprehensive security system has to analyze. He came clean. Cache of cookies. Defragmented. Restarted. Is entered in controls and found nothing out of the ordinary. But then again, I'm not very savvy computer. Help, please!

  Borrow a monitor from a friend and attach it to your computer, if possible, attach your monitor to your friend's computer.  If the monitor remains screwey computer your friend then the monitor is dying and needs to be replaced.  If the monitor of your friend looks like screwey on your computer, you'll have a hardware problem that must be solved.

• My monitor is 17 '' amd now my pages are bigger than my screen and I don't know how to make the page smaller to fit on my screen. Help, please.

  my monitor 17 "is smaller than all my pages. The TPO and low headers are not visible. Once I put the pointer over the edge of the image, and then down the toolbar. Help, please. Also. I get that thin lettering and drop thick as you can see. As if they were a beat on the page re: the ink.

  Hi the Minister m annettegraham fast,

  What version of Windows you have installed? Follow the steps in this document to set the resolution of the screen.

  Let is know if this helps.

• I installed Win 7, sis discovered downloaded illegally, ran XP and now how do I get rid of Win 7? Help, please! VERY IMPORTANT PLEASE AND THANK YOU!

  Okay, so I came one day at home to find Win 7 Ult on my computer. It turns out that my sister downloaded illegally, which I had no idea until it crashed my computer. He stopped working out of a reboot, I therefore had no choice but to run my backup version of Windows XP Professional. I wanted to keep the files of windows 7, I had some important docs ther, so I installed Windows XP under the C:\WINDOWS.old file and it works from there, and win 7 is in the C:\Windows folder. I have only one disk-37, 2 Go C, so I need all the space I can get. I don't know much about computers, but how do I get rid of Win 7 files which absorb almost 10 GB on my hard drive with Win XP works well? Win XP is activated and genuine. I heard someone say "Format the C drive", but then I read about it online and found that it could make my computer unusable! I don't know how to fix it! Please help me, it's very important that I have solve this problem quickly, I am sinking money in flash drives and CDs. help, please and thank you!

  In addition, my system is a Dell GX280 series, pentium 4 with 512 MB of RAM, or 502 a 37.2 GB C drive. It has been renovated and came pre-installed with Windows XP.

  The BIOS and Windows are not the same, you cannot make permanent changes to the BIOS settings only.

  When you format your hard drive it will wipe all information off of it (it's your personal files, Windows, everything, etc.), but your computer still won't turn.  Your can configure which devices to start the system turn off the first, so when we need to start installing Windows from a CD, you need to configure the BIOS first boot device to be the CD-ROM drive (follow thesteps to clean install xp).  You must ensure that your CD of Windows XP is in the CDROM drive ready to begin the clean install, and there should be a point when your system say "press any key to boot from the CD-ROM...".

  You can also follow the procedure here a clean installation of Windows XP: http://www.theeldergeek.com/clean_installation_of_windows_xp.htm

  Your email address was removed for reasons of confidentiality, but unfortunately I do not use my email address for support... only use this website :)

  --> I hope this helps! Please vote or mark as correct answer if it doesn't :)<>

  http://www.xinx.co.uk - my Web site | http://www.systems-and-solutions.co.uk - where I work

  
  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• I managed to do my monitor outside my main monitor, but it says no signal and the screen of my laptop is black. Help, please

  Hello someone,.

  I wanted to connect my laptop to my TV to use it as a secondary monitor. Me being me, I somehow changed settings so that when I plug in my TV, my laptop screen goes black and my TV screen turns blue with no signal. Is it possible to restore the settings when I have it plugged first and it worked?
  Thanks for any help :)

  Hi johnrodden,

  Thanks for posting in the Microsoft community!

  I'm sorry to hear that you have a problem with the external monitor.

  1 turn off your computer and unplug the monitor, but leave the mouse and keyboard connected.

  2. connect the appropriate video cable from the video port on your computer to your TV.

  3. turn on your TV and set it to the input that matches the video port connected to your computer. You may need to refer to your TV user guide for instructions on how to do it.

  4 turn on your computer.

  You should see windows displayed on your TV.

  If you do not see an option named multiple displays in your display settings, then Windows isn't detecting a second monitor plugged into computer. Or else, it does not detect an external monitor plugged into your laptop. When Windows detects this monitor, it will appear in the drop-down list next to the screen. If you do not see that what listed there, try click on Detect.

  Make sure that the monitor you want to extend your desktop is turned on and plugged on the video appropriate port on your computer. You may also need to select the correct source labeled on the controls of your monitor to ensure that the monitor is using the correct video port. For more information, consult the manual of your monitor or go to the manufacturer's Web site.

  Please set up multiple monitors once more, referring to this article:

  Set up multiple monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Refer to the mentioned suggestion as "what can I do if Windows can't identify the additional display?" in this article:

  Multiple monitors: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Reference:

  Solving the multiple monitor problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  We can't wait to hear back on your part.

• I can´t use the USB ports on my monitor dell 1905fp using win7. Help, please.

  I can´t use the USB ports on my monitor dell 1905fp using win7. Help, please.

  Have you plugged your monitor with a USB cable to your computer?

• second monitor does not... Help, please!

  Hello

  Computer: HP Compaq

  Model: CQ2700ED

  Windows 7 Home Premium 7SP1

  I hooked a second monitor (Samsung with VGA connector) DVI-d port.

  I use an adapter from dvi/VGA

  When I turn on the second monitor, he says: "check signal cable".

  In Control Panel / video, he did not see the second monitor.

  What could be wrong?

  Best,

  Rob

  Here are the specifications of your desktop Compaq CQ2700ED. According to the specification, this model has a DVI - D output (digital only) and a VGA (analog only) output as shown below.

  

  (2) - port VGA port DVI - D (3)-

  There is no liability "adapter" that can be purchased which allows to convert a digital signal to analog. The only way that you will be able to use two monitors with this computer in its current configuration is using a monitor with VGA input and a monitor with DVI - D input.

  Please provide the number of brand and model of both monitors you are trying to connect to your computer. This will allow us to determine options that you have with your existing monitors.

  Please send Bravo

• Help, please! Try to remove tuneup helper of my iMac.

  I'm trying to remove my iMac tuneuphelper. I found most of the files and added to the trash. When I'm empty, I get a message "the operation cannot complete because the point help of tuneup is in use" I can't find an icon to exit the program. Activity monitor has gone through and tried to force him out but not luck! Help, please!

  Thank you

  First test:

  1. Go to system-> users and groups-> login items Preferences. If there are topics, click on the "-" button at the bottom of the list to prevent starting.
  2. Reset
  3. Empty the trash

  If the Recycle Bin will not always empty.

  1. Restart in safe mode. Try safe mode if your Mac does not commissioning - Apple Support
  2. Empty the trash
  3. Restart normally

• My CD the Sims 3 does not work! Help please ~

  OK, this isn't an original disc.
  My friend bought for my birthday.
  It is illegal.

  But then,.
  When I opened
  He said:

  ShellExecuteEx failed; code 2.
  The system cannot find the specified file.

  But, when I look at the program file,
  It shows a folder named "Electronic Arts"
  and had the Sims 3 folder it contains.

  There are only 2 files in the folder the Sims 3 on my laptop.
  What is game and support data.
  In support, he has "EADM-install".

  But,
  When I click on it,
  He said:
  Window cannot find the file... blah blah...

  I have the Sims 2 in my laptop.
  Should I remove?
  What happens if I want to?

  Heeelllpppppp...!

  Well, it's currently my 1st illegal CD is not working.
  I bought all the Sims 2 original disk.
  can someone of you give me * brilliant answer on how to fix this?

  Help please.
  CZ if like the answer is buy the original, geezz... my little brother who knew too much. XP

  Well, many drives have copy protection on them.  Copy protection gets every year more advanced, and perhaps your copy is not correct because copy protection is preventing you from playing the game and/or copying.  It is probably the case.  While there may be a way to run a patch or something that is beyond the scope of this forum and we can not help you (or not even a way to do this.).

• My documents are gone can anyone help please?

  My computer started as usual this AM and I used it for about 1/2 hour. After sitting idle for an hour, my screen was empty, my photos generally drive like a screen saver so I thought that my monitor is dead. I rebooted to check. I have a background image of screen that displays usually and he wasn't there during the restart. My icon is still there for my documents, but when I clicked it, it says: "the folder my documents is not found." checked the properties it says J:/mydocuments. (I have an external hard drive) My computer geek installed two or three years previously. I searched for some of my files, but research shows only the same message as above. I tried to reboot again, and my background image screen flashed a brief moment before stopping. Do any one help please? Need help in detail very pls... not good in computer stuff. Thank you very much!!   :(

  Hi KathyAPTHORP,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Perform a System Restore and check if the problem persists.

  Method 3: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 4: Create a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

• Cannot change the screen resolution. Help, please

  I recently reinstalled Windows XP (service Pack2) on my computer and restored the office to the factory settings. Now, the screen resolution is stuck at 640 x 480 and 16-bit color quality as this was not a problem before. The screen that appears under 'type of screen' in the advanced settings menu says "default monitor" and the properties button is not clickable. I tried to connect another monitor to the PC, but it doesn't help. Can someone help please I really need to change the resolution of the screen to a higher quality? Also, the PC has an internet connection if that makes a difference. Any help is greatly appreciated. Thank you.

  ... What other drivers in addition to the graphics card and network card should I try to install?

  In fact, those who are newer than your current drivers.

  I understand your reasoning for installing the monitor driver, however, I'd personally chipset (motherboard), video, audio and network (LAN) first. After updating the video driver, there is a chance that it recognises so the screen correctly.

  I don't know if you have reinstalled Windows XP from floppy disks to install Windows or Dell installation/recovery disks or partition restore hidden, but nevertheless, the drivers that were installed during installation is as new as the installation media. Given that the media are at least 5 years and more (maybe 8 years and more), there is an excellent chance that all the material and device drivers have been updated.

  If you know the serial number or the Express Service Code on your machine, you can enter the page linked below and it should display all the downloads available for your computer. Otherwise, you may need to select one of the options under No., for example to choose from a list of all Dell products (it does not list a Dimension 1100/B110 that has many drivers/downloads available).

  Driver downloads &
  http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

  The page linked below contains a lot of good informaiton, including a list of drivers and downloads that may be available. I think that Section 3: how to determine the components in my computer? and Section 4: how to download and install a driver will help you get the correct drivers for the hardware devices in your computer.

  How to use drivers and downloads website
   http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_324722&isLegacy=true

  The page linked below describes the order in which Dell recommend for installing drivers.

  How to download and install drivers in the correct order
   http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_1A0C0937D62A8739E0401E0A55174744&isLegacy=true

  Kind regards

• Help, please! Aspire E5-511-P4LN takes at least 30 minutes for it to start after stop down

  Help, please!  I have an Acer Aspire E 15 (E5-511-P4LN) that I bought online at HSN last September, 2014.  I'm not really sure what happened past.  On the morning of April 10, 2015, I had downloaded the Wakfu game in my computer.  I played the game for two hours, then turned off my laptop around 14:30.  The same day in the night, about 9:30 pm, I started my laptop, but the monitor was blocked to the Acer Logo at least a half hour!  I thought that it must have the game I've downloaded so before going to bed I hibernated just my computer.  When I woke up the next day, it took my computer at least 15 minutes at the start of Hibernation!  Once he showed me the splash screen, there is no problem with the computer's performance.  in any case, I uninstalled Wakfu of my computer when I finally got in my computer.  I even downloaded CCleaner and used clean the registry.  However, today, April 12, 2015, when I started my computer, he remained on the Acer Logo for at least thirty minutes before taking me to the splash screen!  It's just too.  I don't know what else to do.

  strange question.

  the 'fastest' solution will involve a backup of your data and a reinstall of windows.

  If you don't mind not to do, turn off your laptop and turn it on by pressing ALT + F10 to launch Acer erecovery process.

  If she starts always slowly, we try to limit the question on a clean system.

• Office a half is white, someone help please...

  Office a half is white, someone help please... tried to restore and properties. Thank you

  Hello Tp6012,

  Thanks for your post.  Have you tried to connect another monitor to see if this problem is related to the computer, or if you may have a faulty monitor?  You can also try to go to your computer manufacturer's website and download / install the latest video driver for your computer.

  See you soon

• HP PC HDMI-&gt; Sony Bravia HDMI = no display! Help, please!

  Hello

  I'm usually well informed about the connections for digital devices, but I'm completely baffled by this situation and would REALLY appreciate your response as soon as possible, thanks in advance!

  Problems - the following statement of what I've done:

  I bought HDMI - HDMI Cable to connect my model of PC HP A6355 Phenom 9500 Quad Core (which have a HDMI port) for Sony Bravia LCD HDTV (which of course also have Port HDMI!)

  I turned off TV and PC, then connect the HDMI cable to the two end to each device

  Turn on the PC and the TV

  I checked every singal channel AV and PC on TV - no connection regonised

  I checked my display settings and set it to lower the resolution and trying to replicate the monitor (still doesn't)

  Have no FN key on my keyboard

  I took off the cable from the PC and connect it to my HP laptop and it worked perfectly fine! (this is the part where it puzzle me most!) one thing I notice is when I connect the cable from the laptop on tv - display automatically to survey and ready for me set the appropriate resolution setting - he didn't do it on my desktop PC...

  Why?

  My HP PC is 32 bit operating system

  NIVIDA GeForce 8500 GT

  I also checked Device Manager to see if my HDMI port works on my PC, but there is no option to select HDMI (unless they have another name for it IE bus usb etc?)

  Help, please! Thanks again

  Hey there,

  I just want to say that I have now solved the problem...

  Apparently my Nivida GeForce driver is not updated, make sure that you update your regularly and you will have no problem!...

  A smile and a big smile on my face seeing now works!...

  Thank you even if no one answers, it seems content to my brain so that it works properly!

  Thanks again

• _ "Windows Explorer has stopped working" error - HELP Please! __

  I tried pretty much everything I can try in this thread, and nothing seems to work! It is very probably the the most annoying problem that I experienced with windows! I can open all the files and programs it is just that the 'Windows Explorer has stopped working"error appears literally every 5 to 15 seconds!  I click on cancel, and the other appears which says "Windows Explorer restarts" help please, I've never been more ready to give up on windows for good!

  Thank you, Bryan

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.