LCD monitor turns black with the message 'no sync '.

Similar Questions

• On the Satellite A210-14 t LCD screen turns black randomly

  For several days, I have the problem, my lcd screen turns black all of a sudden, the 'photo' is just disappearing. but the backlight is still and the system is still running (which happens most of the time in battery mode)
  When I close the laptop, pc goes into stand-by mode and so I open the pc again and the screen works again
  But this isn't really a solution.
  What can I do? Fresh grafix drivers are installed.

  BTW:
  I use WinXP

  HM, how long do you want the machine. Maybe you should check the powersaver for battery operation parameters when the display is sharp because it can be a characteristic powersaver the screen turns off.

  If please check your powersaver settings and set the time when the screen turns off at maximum or turn it off, then check if the error appears again.

  Would appreciate the your part feedaback. :)

  Welcome them

• I have service pack 3 installed and yet I still have a black screen with the message of counterfeiting

  I have service pack 3 is installed, but I still have a black screen with the message of counterfeiting. I am a beginner of the computer

  Hello

  (1) you are able to log the desktop computer?

  (2) when exactly you get the black screen?

  (3) you receive an error message on black screen?

  (4) have you made any changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, try the methods below and check if the problem persists.

  Method 1:

  In case you receive a black screen on startup of the computer, and then try the steps of troubleshooting provided in the link below.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  Method 2:

  If you are able to start the computer and you get the black screen at the level of the office without wallpaper then try the procedure described in the link provided below.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• HP W2207h LCD MONITOR - HOW TO DISABLE the OSD LOCK?

  MY EXTERNAL, the HP W2207h LCD FLAT SCREEN MONITOR WORKS FINE with the exception of THE MENU FLASHING / screen EVERY 3 SECONDS AND a WHITE SIGNENT THAT READS, ' LOCK OSD.  I TRIED: HOLD THE MENU AND THE POWER BUTTON / STOP DOWN TO NOTHING IS THERE FACT!  NOW THE POWER BUTTON DOES NOT TURN OFF - THE LIGHT GOES FROM ORANGE TO BLUE.  THE RESULT, I MONITOR GET THE SHAPE OF THE POWER PLUG FROM SOCKET... Help, please!

  TUFTS OF SERETHIA

  Hello

  Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

  Then if OSD persists, repeat the OSD lockout Procedure .

• The iOS to iPhone 4S 9.3 installation fails during the audit with the message "...". iOS 9.3 failure of verification because you are no longer connected to the Internet"even if the phone is connected.

  Greetings, Installation of iOS 9.3 to my iPhone 4S (model MD234X/A with iOS 9.2.1 (13D15)) fails when checking with the message "...". iOS 9.3 failure of verification because you are no longer connected to the Internet"even if the phone is connected. as I can browse with Safari ok. I tried "Retry" several times, has waited several hours and "Try again" and turned the phone off and then on again then "Retry", all with the same problem! Help, please?

  Hi Bloggsj,

  Thank you for using communities Support from Apple.

  I see that you get an installation error when installing iOS 9.3 OTA.  I suggest that you try following the steps below to download the latest version of the update:

  If you have downloaded iOS 9.3, but you can not install it, you will need to download the update again. First of all, remove the update of your device:

  1. Go to settings > general > storage & use of iCloud. Under storage, click on storage management.
  2. Find iOS 9.3 in the list of applications.
  3. Press on iOS 9.3, then remove the update.

  Now you can go to settings > general > software update and download the latest iOS update.

  If you can't put day to iOS 9.3 on your iPhone 5s or earlier, iPad Air or an earlier version, or iPod touch

  Take care.

• Satellite L300 starts with the message "JCQFX is compressed.

  I have a toshiba satellite l300 and worked very well until it turns off, when I turned on the computer laptop back it came with the message
  JCQFX is compressed
  Press the keys ctrl, alt and del to restart
  I did it but it keeps going back to the same thing, please can someone help me I am at my wits end and trying to monopolize my laptop girls thank you in advance x

  Hi the Welsh,

  Never heard about this error message then I asked Google on this subject and that therefore say: also no information :(
  Very strange

  So, step by step:
  Do you see the same behavior when you start Notepad (Windows) in safe mode?

• Just updated to ios 9 and my ipod touch is stuck at 'update of the iCloud parameters.  I can not restore from iTunes as I have to disable 'find my iPod toch' and cannot do the iPod is blocked with the message to update.  Will not work force a stop down.

  Just updated to ios 9.2 (from 8 something) and my ipod touch is stuck at 'update of the iCloud parameters.  I can not restore from iTunes because I have to disable "Find my iPod touch" first of all, and I can't do as the iPod is blocked with the message to update.  Forcing a stop down does not work that for some reason, I am unable to turn off my iPod touch manually.  I tried to turn off my wifi to see if that stops the iPod touch, but he always keeps on the message to iCloud.  Do I just wait until the battery sinks so that it forces a reboot?

  Place your iOS device into Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.

  iOS: I forgot the password or disabled device

  If the recovery mode does not work, try the DFU mode.

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  To learn how to restore:

  iTunes: restore iOS software

  To restore backup see:

  Restore your device from an iCloud or iTunes backup - Apple Support

  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  If no problem what happens or doesn't happen, and when in the instructions? When you get the iPod into recovery successfully mode and connect to iTunes on the computer should say that it found an iPod in recovery mode.

• error packaed and launch: Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path:

  Hello

  I get this error when you try to run the sample of cards on the corrugation Simulator:

  Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".

  The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged.  With the help of Mac, the latest versions of everything.  The application runs in undulation ok, but I can't throw on the SIM BB10.

  Someone else have this error and know why?

  PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?

  PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged.  I guess it should not but leaves me clueless as to whats wrong with cards.

  Thank you

  The two directories (in the extensions directory and maps project directory) have permissions to 777.

  But you gave me an idea...

  It turns out that simply by putting

  "Packages".

  in setting output wasn't enough, I need the full path

  for example: "/ Users/username/RippleSites/Maps/packed."

  and presto, now it works!

  Thank you!

• What's happening: exception 'RTCError' with the message "connection failed"?

  Hello

  I focused the second time this week that there are problems with the connection to the servers of low-COST airlines. Last problem was at about 10:30 CEST. It takes at least 15-20 minutes - I know not how long this problem has really, because I know about this than if my customers report a problem. For the same reason, I don't know if this has not happened more often, because I'm not check every 5 minutes.

  When this problem occurs, I have exception:

  'RTCError' of exception with the message, "Cannot connect" in /var/www/lib/LCCS/lccs.php:774

  Stack trace:

  #0 var/www/lib/LCCS/lccs.php(666): RTC::http_get ('http://collabor...', Array)

  #1 var/www/lib/LCCS/lccs.php(255): RTCAccount-> do_initialize()

  #2 (...) RTCAccount-> __construct ('http://collabor...) ")

  (...)

  No idea what is worng? Some work on the Adobe servers?

  I hope it will be useful for people with similar problems.

  We sought with Jamie Ho where is the problem, but it is impossible to detect the reason. Traceroute test shows nothing interesting. Newspapers to also analyze.

  The solution we found another server (hosting in other place / data center) uses as a portal to communicate with supply services. It has helped, and that door connects no problem now.

  But what is strange, we tested more servers and it is a lottery. One of our test servers could not make any connection with procurement services. I found here http://forums.adobe.com/thread/772442 that this is not a new situation.

  This is what it looks like now. We monitor it all the time, but for now this Portal Server solution seems good and he is the only one that solve problems.

• Problems with the message history

  Hello. I have trouble with the message history. My posts are sorting in this scheme: yesterday-> today-> last month-> last week.

  I tried reinstal and reconnection. Nothing has worked.

  It sounds like your PC clock was set wrong for once
  
  nothing you can do about the history of cats that was incorrectly marked with timestamp wrong
  
  Eventually, things will be to straighten out naturally, but it depends on bad when PC was

  Kind regards
  Neil

• Satellite L30 - 10Y always starts with the message of repair

  Hello

  Whenever I try to run my Satellite L30 - 10Y (PSL33E) I get the window with the message Startup Repair (Windows cannot repair this computer automatically).

  I went through the list full repair and still have the same message.

  Can someone please?

  Hello

  Maybe the operating system is confusing upward
  Have you tried to restore using the Toshiba Recovery disk?
  Check if it works!

• continuously appears with the message that my WiFi (Wireless LAN) is disabled

  My HP Connection Manager opens with the message that my WiFi (Wireless LAN) is disabled permanently, but I have no problem to connect my computer to the signal from my Belkin.b23 plug in router set wireless.  I am able to browse internet while I'm typing.  Should I worry about this message?  If so, I don't have the first clue about the activation of this feature.

  Hello

  1. don't you make changes to the computer?

  2. which version of the operating system are you using?

  3. What is the full error message you get?

  4. do the icon windows brand of task red bar see the notification in wireless?

  Try to uninstall and reinstall the HP Connection Manager software and check if the problem persists.

  See the site mentioned below for the procedure to uninstall a program:

  http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program.

  If the problem persists try help on the HP forum site mentioned below:

  http://h30434.www3.hp.com/.

• "Unknown popup window titled" information "appears with the message please wait a few moments.

  Original title: window unknown popup

  I'm under THAT XP SP 3 fully updated; Mozilla Firefox version 7.0.1 - I keep getting a small pop up window titled 'Information' with the message: Please wait a few moments. It has a small clock on the left side of the field. Only momentary and random. I ran Mcafee virus scan and webroot spyware with no prob on either. Is this some sort of spyware or what?

  Hello

  1. find this jump up while working on Mozilla Firefox?

  I suggest that you initialize in a clean boot state and check if the problem persists.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (d) when you are prompted, click on restart to restart the computer.

• charge of Picasa folder with the message "invalid image."

  disaster

  Windows xp that I screwed up somehow on Picasa, and now I have a file that loads with the message "invalid image."  Is it possible that I can fix these photos

  Contact support Picasa.

• computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Start the computer by using the Microsoft Windows XP recovery console, and then perform a check disk on the file system.

  To do this, follow these steps:

  1. Insert the Windows XP CD in the CD-ROM or DVD - ROM drive, and then restart the computer. Select the required options to start the computer from the CD-ROM or DVD - ROM drive if you are prompted to do so.
  2. once the Welcome to Setup screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER. NOTE: In Windows XP Home Edition, the administrator password is blank by default.
  5. at the command prompt, type the following command and press ENTER: cd system32
  6. type the following command and press ENTER: chkdsk /r /p
  7. remove the Windows XP CD in the disc drive.
  8. Type exit to restart your computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost