I have service pack 3 installed and yet I still have a black screen with the message of counterfeiting
I have service pack 3 is installed, but I still have a black screen with the message of counterfeiting. I am a beginner of the computer
Hello
(1) you are able to log the desktop computer?
(2) when exactly you get the black screen?
(3) you receive an error message on black screen?
(4) have you made any changes to the computer before the show?
Please provide more information on the issue so that we can better help you.
In the meantime, try the methods below and check if the problem persists.
Method 1:
In case you receive a black screen on startup of the computer, and then try the steps of troubleshooting provided in the link below.
Computer stops responding with a black screen when you start Windows XP
http://support.Microsoft.com/kb/314503
Method 2:
If you are able to start the computer and you get the black screen at the level of the office without wallpaper then try the procedure described in the link provided below.
After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
http://support.Microsoft.com/kb/318027
Tags: Windows
Similar Questions
-
Sometimes when I start my PC I have a black screen with the Windows boot manager at the top. Although there are several options available, that nothing happens no matter what keys I hit and the only option is to shut down the computer and restart completely. Sometimes the Boot Manager page turns and my office sometimes opens fine. I've updated with everything Microsoft has Windows Vista and I still get this screen. Anyone has any ideas.
Do a startup repair and see if that fixes it:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
I recently tried Win 8 on my VAIO laptop spare parts on which I ran Vista, after having previously deleted all the files and documents (I don't use often the laptop). Having concluded that Win8 will really work correctly with a touch screen (and the display size was bad as well), I uninstalled WIN 8, understand that I have to re - install Vista from my rescue disks. This I tried successfully a few months previously to make a clean reinstall. However, after removing 8 WIN via the Control Panel, I can't re - install Vista now. All I get is a black screen with a message "The operating system not found" and the rescue disks do not register. What can I do? I like Vista (although I now run Win 7 on my PC) and really want to put it back. Grateful for the advice.
Well I finally fixed it by tweaking the BOOT BIOS settings and find something along the lines of VAIO Setup. I'm afraid, I just don't remember exactly what I did, but suddenly I found and ran 'VAIO Hardware Diagnostics' gave me a heart when it announced "no error was detected on the Vaio. Then I saw there was an entry for 'VAIO Recovery Utility - Recovery Wizard' and everything started to load. Since the 2 recovery discs I had. Finally, I ran MS Office and Small Business CD-ROM and now everything is back the way that it used to be. Here I had taken more note of how I got to the well Recovery Wizard. I hope that I never have to do it again!
-
As usual I left my computer and after a few minutes, he fell asleep. Next morning, I had moved to the mouse, computer wakes, but I got a black screen with the mouse pointer. I hit CTRL + Alt + Delete and screen with Task Manager option appeared. I stop computer and rebooted. Welcome screen and logon is displayed. After you enter the password and click on submit that the screen becomes black with only the pointer visible mouse. I don't have not installed anything recently. Can you help me find my office?
OK, I had the same problem. I thought that if you have a pointer and can launch Manager tasks and all programs through its file > new task, then the hull works correctly. No office and no taskbar mean that something is wrong with explorer.exe. Now, he has corrupted not necessarily, may not properly launched.
Here's what I did:
1. I opened the Task Manager, the Details tab
2. I killed all explorer.exe on the list
3. just to be safe, I also tried to kill dwm.exe but it will be may not be necessary (it never goes away)
4. I started the new instance of explorer.exe via file > run
And voila, I had the desktop and the taskbar.
It will be useful.
-
I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?
Try the following. It seems yo may have to let the battery drain is completely:
- iOS: do not respond or does not light
-Also try DFU mode recovery mode post-test
How to put iPod touch / iPhone in DFU "Karthik doodles."
-If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.
-Try a different cable
-Try on another computer
S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.
-
I have a split screen with the left part always my Wordpress site. I don't know how to get rid of him... Help!
See:
-
Windows 7 black screen with the cursor of the mouse in normal mode and safe
Hi all
I hope someone can help.
Laptop downloaded updates and after the restart will only go to a black screen with the mobile mouse cursor.
This occurs in safe mode, normal mode.
I tried all variations of safe mode and still the same thing happens.
Last known configuration does not solve. (i.e. no restoration or image to enter)
Using the vista win7 dvd upgrade or a linux dvd and screen appears as you expect his obvious system is very good.
I tried the options on ctrl alt del, ctrl shift esc etc etc, but I cannot go into Control Panel, or a any part of the win7 GUI.
Best I can do is access via the command-line... any thoughts on how to fix?Hello
Welcome to Microsoft Windows 7 answers Forum!
You can try the following steps and check whether the problem is resolved.
You can disconnect all external devices except the keyboard and mouse and check if you are able to boot to the desktop and check.
I also recommend what to do the Startup Repair. Follow these steps:
To perform a Startup Repair follow these steps:
1. Insert the DVD of Windows 7 and restart the computer.
2. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.
3. choose your language settings, and then click Next.
4. click on repair your computer.
5. Select the operating system you want to repair, and then click Next.
6. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.
Access the link below for more information on the Startup Repair:
http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx
See also:
http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/24b44a01-872e-4d87-867f-ed01a3579031/ for the black screen problem
Thank you, and in what concerns:
Suresh Kumar-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
It was working fine and accidentally my phone fell on the keyboard and the computer froze. There was a part of the image of what was on the screen before that happened and blue and red lines/markings or whatever it is. I unplugged and took out the battery. When I turned on it again, the black screen with the Dell logo comes up and just stays there. What should I do?
Hello
If under warranty contact Dell
or ask in the forums Support of Dell
http://en.community.Dell.com/support-forums/default.aspx
If it is under warranty, contact a reputable repairman, local computer
-
before starting up the plant, black screen
A friend gave me the laptop since they bought a new. I tried to do a clean install of Windows Vista on a laptop Gateway P6831 FX. After changing the boot order in the bios settings, the dvd starts to spin. The only thing that appears on the screen is a screen black/Bank. I'm never invited with the message 'Press any key to start the installation' to start copying the files for vista.
The Bios recognizes the hard drive (Sata). I don't know what to do at this point. Help, please.
I fixed it. I looked at a few other responses in this forum and used the SATA drivers during the installation of Windows XP. After that, I've upgraded to Vista.
-
More information about the problem:
BCCode: 4th
BCP1: 0000000000000099
BCP2: 00000000003E667F
BCP3: 0000000000000000
BCP4: 00000000003E677F
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1Can anyone help.
Check in the most recent discharge has not been activated. What are the results of the auditor/Reset?
-
Hello
I get this error when you try to run the sample of cards on the corrugation Simulator:
Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".
The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged. With the help of Mac, the latest versions of everything. The application runs in undulation ok, but I can't throw on the SIM BB10.
Someone else have this error and know why?
PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?
PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged. I guess it should not but leaves me clueless as to whats wrong with cards.
Thank you
The two directories (in the extensions directory and maps project directory) have permissions to 777.
But you gave me an idea...
It turns out that simply by putting
"Packages".
in setting output wasn't enough, I need the full path
for example: "/ Users/username/RippleSites/Maps/packed."
and presto, now it works!
Thank you!
-
I have a Pavilion Notebook and recently caught the virus from file recovery. I bought and ran the disc of Trend Micro Titanium Maximum Security. Now, I get a black screen with a flashing cursor in the upper left corner of the screen. All tests ran for memory, hard disk, etc. are OK. Now I have a recovery disk, but have not backed up my files. Any suggestions?
Download your backed up files, then you can boot from your recovery disks to reinstall Windows.Several options to do so.
Remove the hard drive and attach it to one > USB adapter . Plug it into another computer via usb port and copy files off the power.
You can use > Ubuntu Live CD to boot from and backup files.
OR ->Kaspersky CD has the ability to back up files.
-
I have laptop dual boot
Vista on the c drive, and Windows 7 on drive d.
accidentally formatted the c drive, now at startup, I get black screen with blinking cursor
I have the vista recovery disc, but no drive internal, there is also no option in the bios for disk external usb
Please help meHello
"but no drive internal."
to find out how to reinstall vista you will need to fix the dvd player if there is a
you have a recovery for a reason disc
Contact the manufacturer of the laptop to answer to this
-
Windows 7 Pro 64 bit black screen with the mouse only on startup and nothing else
Hi there, Windows 7 system recently froze on me when I tried to move a large file on a USB hard drive. I didn't was not able to close the file so I decided to stop my PC with the regular start-> Shut Down.
Now when I try to turn on my computer, after the "starting Windows" and Microsoft report goes to a pure black screen with just a (mobile) mouse cursor, not keyboard commands or click right work (eg. ctrl + alt + delete does nothing).
I tried to start in safe mode, safe mode with network, they do the same thing after the "Starting Windows" screen. Tried to boot with my Windows 7 Pro 64-bit installation disk so and entered commissioning repair - no problem. Tried system restore and it went successfully, however after clicking restart is again the same thing!
It's really making me crazy, could someone please help me? I really want to reinstall Windows and lost my files (since I can't even in a form any Windows Installer interface I'm not able to do a repair).
Thanks in advance for your suggestions!
I will proceed to a re - install now, thanks anyway for your efforts
-
Tried to start in safe mode & start the laptop very well, but once I went back to the startup by default, face the same problem again.
Hello
Take a look at this thread and follow the same steps listed in the breast.
In particular, the bit on a SFC/scannow. Sometimes when you unplug a PC like that, you can damage some essential Windows files. A SFC scan should be able to fix it.
This link contains a lot of other really good as well troubleshooting procedures.
I hope this helps.
Maybe you are looking for
-
How can I use my iphone without a mobile phone service provider?
I have an iphone 4S that I would like to use with my games and apps on wifi, but don't need a phone number, e-mail or facetime. If I do not need a mobile phone service provider. How do I set it up to just use WiFi?
-
PC will not play instant streaming more, Netflix error: 1001
original title: my pc won't play netflix movies. Why? Netflix had me uninstall and reinstall silverlifgt but will not play the movie from netflix. Err 1001, it says. What can I do?
-
Hello worldtoday after a failed update my double D6633 Z3 does not start. The message "the software update failed. Make sure that your phone is connected to the computer and try again. "flashes on my screen. The issue is that PC companion can not fin
-
The cursor moves to the left corner (on top of the trash) several times when I'm working on the computer. This work is to find Web sites and using the office 2003 programs. No games or watch video. What can I do to fix this?
-
How can I bypass password and the Welcome screen on windows 7?
starting with W 7, I get an error of soul and user password. When I click ok I have 2 icons with a request of the users password. If I click ok it goes to the Welcome screen. How can I clean it and go directly to windows without password and home scr