Satellite L300 starts with the message "JCQFX is compressed.

Similar Questions

• Satellite A200 starts with the message "missing operating system".

  IM wondering if anyone can help... I have a Toshiba Satellite A200, who, at the start, just comes up with a black screen and the "system of missing operating" in the upper left corner.

  I looked for solutions on the net. Nothing is really done. I tried to start in safe mode using the F8 function key, but it did not work. I tried to boot from a vista recovery disk. That did not work. I tried to reinstall vista and it came just with the error 0 x 80070002. Im stuck and don't know how started it in safe mode so that I can transfer data and then reinstall vista (reimage) on this subject.

  Can you make suggestions?

  Hello

  Have you tried to get into the Bios and check if a hard drive is recognized? If not, the hard drive no longer works. If so, try to make another copy of Windows disk.

• Satellite L30 - 10Y always starts with the message of repair

  Hello

  Whenever I try to run my Satellite L30 - 10Y (PSL33E) I get the window with the message Startup Repair (Windows cannot repair this computer automatically).

  I went through the list full repair and still have the same message.

  Can someone please?

  Hello

  Maybe the operating system is confusing upward
  Have you tried to restore using the Toshiba Recovery disk?
  Check if it works!

• Satellite L300 - problem with the battery and with the FN keys

  Hello

  Please help me with the following 2 problems:

  1. I bought 10 L300, 2009 with Vista, and then I switch to Win7. After that the FN do not work. I can use a couple of access keys, but anyway, they do not appear on top of the scr4een as if it was on Vista. You have the solution to work again?

  2. after the upgrade to Win7, my battery is almost dead. I use 230V taken to work on my laptop. I used my laptop properly and it is really surprised that the battery had a life so short. You have a similar experience or you may have a solution to work again?

  Thanks in advance for your help.

  (1) install VAP (value added package) and Flash memory card Support utility.
  For example, you can find the driver area L500 software.

  (2) you can try to define some battery saving options in the power management Windows 7 in order to reduce the working time of battery.
  I switched to Windows 7 and the battery still works fine.

• LoadRunner: LoadRunner fails to start with the message "there are no valid license.

  Hi HP supports,

  Since last night, I have a problem with running HP LoadRunner version 12.50 product controller.

  During loading, LoadRunner opens a dialog box where the following message appears: "there is no valid license. Renewal of license, contact HP Software customer service".

  I tried to fix LoadRunner installation by running the option fix in the installer and also execution of command below (I) has not helped found on another thread:

  regsvr32 "C:\Program Files (x86)\HP\LoadRunner\bin\LRWrapper.dll.

  It's very strange that the community license of 50vusers is active and we have also allowed VUD Global which expires on 19 Nov 2016th (see image). Starting today, this global license VUD is shown as being invalid (!) (attached image).

  Could you please tell me why the license now displays as invalid and how to restart the controller?

  Thank you
  Marko Stankovic

  

  It is the bad company for servers, storage, software, and network. Please use the Hewlett Packard Enterprise Community:
  http://community.HPE.com/T5/LoadRunner-practitioners-Forum/BD-p/SWS-LoadRunner_SF

• Satellite A110 starts with error message "PXE".

  I saw something on the internet that I usually look on the web address www.datemule.com I think, and I think without doing something new my laptop started to reboot and then pops up this message:

  INTEL UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  INTEL UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  what it means? Please help me to solve it!
  I look forward to your reply! Thank you!

  At first, I must say it's really strange that something like this happens so suddenly. It seems that your laptop can not find the HARD drive as a boot device.

  Start please your laptop, then press F2 to enter the BIOS settings. Check it please on the first page if the HARD drive is recognized and registered correctly. If Yes check it please boot option in the BIOS and don't forget HARD drive is set as the first boot device.

  Please post some info on the status of the BIOS and the HARD drive.

• Satellite U940 starts with error message after BIOS update

  Hello, I have apologizie for my English, I know that's not the best...

  I made a mistake very stupit, and now I can't use my new U940 satellite - 103.
  I updated the BIOS from version 1.2 to version 1.3.

  Unfortunately, I did not have any recovery media (I'm stupid, yes!).
  When I turn on the ultrabook, he said:
  "Your PC need to be repaired.
  error 0 x 0000001
  Does anyone know what I can do, please?
  THX

  Hmm you see a Toshiba screen when starting?
  Are you abele to access the BIOS?

  If this isn't the case, I guess something was wrong during the update and you will need to request the service in your country to fix.

• Re: My Satellite A500 starts with error message

  My computer laptop satellite A500, after this startup and windows open, a message from the Update Manager "error #-5, I wonder what that might be.
  My operating system is Windows 7, 32-bit 4 GB of Ram.

  Can anyone give me the solution for this error?

  Hi jun07,.

  Who Update Manager you mean exactly?
  I think that a screenshot would be very useful in this case.

  If you mean the update of Windows, you must check for Windows updates again and check if the updates will be installed.

• Windows XP mediacenter edition starts with the message "Not found operating system"

  pls help..., my Acer laptop aspire 5594wxmi, windows xp Media Center Edition version 2002, service pack 3. can't run recovery... I've seen all folder and file missing in MY DOCUMENTS..., I try to make formatting back up the entire system... "Damage' does not work?, the problem is OPERATING SYSTEM NOT FOUND, even I try" backup cd "dics still return a same problem... oh my God, I m not fight... to my friend, here just ask for HELP..." Thank you.

  Hi garyquek,

  ·         Remember to make changes?

  ·         What happens when you try to use the recovery?

  You can check if this article helps.

  "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer

• Why am getting started on the internet with the message saying that more than one computer using the same ip address

  am is started from the internet for 3 days pass with the message saying that more than one computer using the same ip address

  am is started from the internet for 3 days pass with the message saying that more than one computer using the same ip address

  Thatmessage normally means a another computer on your local network has the same IP as the computer you are on.

  You control your Local network?

• First cc 2014 crash with the message "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

  I've updated for Premiere Pro CC 2014, all other Adobe CC 2014 software works very well, but the first does not load again. The start page (frame) happens - my computer everything slows down and after a minute or two, it freezes completely and comes up with the message: "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

  I use a macbook Pro 15 '' (2014) with 16 GB of RAM and 760 GB SSDS. "

  Help, please!

  Hi Brigitte,.

  Go to the following location and rename the folder in the name of old_folder

  User/user/library/Application Support and rename the Adobe folder

  User/Library/Preferences and rename the Adobe folder

  Then, go to the folder Documents and go to Adobe/Premiere pro/8.0 and rename the 8.0 folder

  Make sure that you are in the library of the user if you are not sure to check out the link below.

  Access the hidden user library files. Mac OS 10.7 and later versions

  Kind regards

  Vinay

• Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

  Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

  There are dozens of discussions in this forum that describe the fix

• Satellite L300 freezes with Windows Vista

  I use the Satellite L300 laptop with Windows Vista.
  Once the connection is freezing, so I used to do Toshiba HDD recovery and formatted and installed with its recovery tools.

  Now its connect with normal mode.
  The problem is that if I use multitask or open a window or whatever it is the laptop is hanging (freeze).
  Again, I have to forcely, I need to start with safe mode and normal mode then again once I get the same problem.

  Can someone tell me the solution?

  > The problem is that if I use multitask or open a window or whatever it is the laptop is hanging (freeze).
  Maybe some of your applications cause this problem

  I think you should check what software could cause what I mean it of not impossible that a 3rd party applications that runs in the background would be the cause of your troubles

  Of course, it could also be related to a hardware malfunction. It looks a bit like a RAM problem, but just a personal suggestion.

• I have service pack 3 installed and yet I still have a black screen with the message of counterfeiting

  I have service pack 3 is installed, but I still have a black screen with the message of counterfeiting. I am a beginner of the computer

  Hello

  (1) you are able to log the desktop computer?

  (2) when exactly you get the black screen?

  (3) you receive an error message on black screen?

  (4) have you made any changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, try the methods below and check if the problem persists.

  Method 1:

  In case you receive a black screen on startup of the computer, and then try the steps of troubleshooting provided in the link below.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  Method 2:

  If you are able to start the computer and you get the black screen at the level of the office without wallpaper then try the procedure described in the link provided below.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• "Unknown popup window titled" information "appears with the message please wait a few moments.

  Original title: window unknown popup

  I'm under THAT XP SP 3 fully updated; Mozilla Firefox version 7.0.1 - I keep getting a small pop up window titled 'Information' with the message: Please wait a few moments. It has a small clock on the left side of the field. Only momentary and random. I ran Mcafee virus scan and webroot spyware with no prob on either. Is this some sort of spyware or what?

  Hello

  1. find this jump up while working on Mozilla Firefox?

  I suggest that you initialize in a clean boot state and check if the problem persists.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (d) when you are prompted, click on restart to restart the computer.