LDAP configuration problems

Similar Questions

• LDAP Configuration problem - BEEP in a deployment of OBIEE

  All,
  I have an OBIEE 11 g (11.1.1.6.0), including environmental BI Publisher put in place. I have successfully completed the integration of OBIEE with LDAP and LDAP ID user can connect you with the Group/privilege information is applied as announced. BI Publisher, however, is not so cooperative. Here's what I have:
  
  As part of the LDAP configuration, I replaced the BISystemUser id with a user based on LDAP, ADBISystemUser id. However, whenever someone tries to connect, they get the error message * "[53012]" user authentication failed: adbisystemuser "*." The BIP newspaper shows this same message, preceded by the message * "[nQSError: 43113] Message returned by OBIS." * I know with certainty that this user id is configured correctly - OBIEE users are able to connect, and my LDAP browser is able to connect using these credentials.
  
  At RANDOM, I have the Administration-> Security page configured as follows:
  
  Local superuser: enabled (this is the only way I can connect now)
  
  Authentication: authentication UNIQUE not selected; Use LDAP selected and the correct LDAP, id, password etc entered configuration settings.
  
  Authorization: security model = BI Server and the correct settings for this entry (entry in the installation, no change)
  
  
  I searched nQSError 43113 and 53012 and validated different suggestions I've seen without success. I can't tell you how many times I rebooted services. I have reset the GUID, verified passwords/accounts are locked out, tested and retested in BEEP passwords match those of LDAP. The only thing that worked (sort of), was when I jumped LDAP protocol for authentication and set up LDAP for authorization (3rd section on the Administration-> Security Page). When it is configured for LDAP, the BEEP was able to bind to LDAP and users could connect. Unfortunately, given that we were not BI server authorization, users could not see the folders, or they would avoid data sources or report objects. What do we have this test was to confirm that BEEP pourrait LDAP access. It is not the way I need to do.
  
  The last thing I tried was to adbisystemuser id in LDAP so that it lay in the same "folder" as all my users instead of a folder, separate service accounts. Even this was not useful. I implemented the XMLP * groups, even though I do not expect that these are referenced. The id adbisystemuser is a member of XMLP_ADMIN, and users have been added to the XMLP_DEVELOPER group, for what it's worth.
  
  Suggestions or recommendations on how to get the BEEP if authenticate to LDAP would be really appreciated!
  
  Thank you!
  Eric

  Eric,

  In my setup, I use Fusion Middleware as a model of security and everything seems to work.

  In the documentation model Oracle BI Server is Legacy only:

  5.2 integration with Oracle BI Server Security
  The security option Oracle BI Server is for customers who want to use the authentication of the legacy of 10g. This section does not apply if you set up Oracle Fusion Middleware security.

  Michael

• LDAP configuration with vFoglight 6.5

  Im trying to configure LDAP services within our domain for use with vFoglight. My goal is to have a group operator and administrator group that uses our AD accounts instead of "local." I'm not sure if I have properly configure all LDAP settings. Can someone check my settings and let me know where can be the problem?

  Also under Administration > users & security management > user management > groups; The LDAP group button is grayed out. If the LDAP settings are correct this button will become live?

  Here are our settings:
  Account is anonymous. fake Unique name of the service account. Contoso . com\svc_acct password | **** LDAP query prefix | CN= Query LDAP suffix. OU = site, DC = corp, DC = contoso, DC = com The scopes to search for groups | UO = site, DC = corp, DC = contoso, DC = com The second space of group names. UO = site, DC = corp, DC = contoso, DC = com The third namespace group | "in white" The LDAP context for the user's search. UO = site, DC = corp, DC = contoso, DC = com Role attribute ID | name Is Role DN attribute | fake ID of user alias attribute | sAMAccountName ID of the attribute to search for groups | members Match the DN of the user. true JAAS LoginModule name | Security for JACQUES com.quest.nitro.service.security.auth.spi.NitroExtendedLdapLoginModule name field. FGL-web-console Group ID parent attribute | memberOf Attribute of the group to search for nested groups. members Maximum level of group nesting. 15 LDAP search time (milliseconds). 10 000 mode of research group | direct

  I hope that your problem has been resolved but support. You can also check our free training site: http://svgtraining.quest.com/ which has a video on the LDAP configuration.

• After the LDAP configuration cannot connect - ERROR: failed to connect vcloud use meter 3.2

  LDAP configuration page settings are as below: -.

  Host:-domain name

  port - 636

  Use SSL - verified

  username - DN [email protected]

  Password-*.

  Base DN of the user - OU = test, DC = test, DC = com

  User object class-

  User name attribute - sAMAccountName

  When I try to open a session using

  test. com\testuser or [email protected] it says ERROR: failed to connect

  and

  Cat /var/log/usgmtr/um.log--spectacles suite error -.

  Excerpt of ERROR [http-bio-8443-exec-1]. Authenticator: org.apache.directory.shared.ldap.model.exception.LdapInvalidDnException: ERR_04202 a value is missing on some RDN

  can anyone suggest what could be the problem

  Indicated user name is a UPN or Email address... not a DN.  DN resemble CN = test, OU = test, DC = test, DC = com.

  Please post the exact value of the DN using LDP or a similar LDAP tool against the LDAP provider to check the attribute for the metering login account.

  LdapInvalidDnException

• Configuration problem?

  I'm new to Labview. I can't connect with 3458A. It works with 34401. I use a USB/GPIB from Agilent 82357 B interface. I have a VEE program that works with the 3458A. I think I have a driver or configuration problem. I am at a total loss, any help would be appreciated.

  I got it to work with the correct command. Thanks for your help. I have much better understand how this works now.

• two drivers of PXI chassis with Configuration problem

  Hello

  I have two PXI chassis. One is PXI 1033 and works perfectly with the NI PXI-5404, 5105, 6509, 1409, installed 8336. The other is 1036 PXI with the PXI-5404 NI, 8366 installed. When I was trying wreath connect, as master 1033, 1036 as slave, I found several problems.

  1. in the Measurement & Automation Explorer, does not have my good guys in 1033. Instead, there is a sign of the Red Cross in bottom right with 6509, 5105, 5404.

  2. I can't find an another 5404 of the 1036. In fact, I can't find 1036 in MAX.

  Update BIOS. My PXI system is already identified under the name 'NOR PXI - 1033 Embedded MXI Express' and Chassis1 is identified as 'NOR PXI 1033'.

  So I made several tests as below:

  1. unscrew the 5404 1036 slave. MAX can configure 2 1036 chassis. Ok. But when I reconnect 5404 in 1036, same result happened as stated above.

  2 uninstall the driver of 5404, so the 5404 in 1033 does not either now. And then reboot again, same result happens again. Cannot detect the 1033 chassis. Other vouchers in 1036 don't work either.

  Please, any suggestion is highly appreciated.

  Sincerely,

  Bin

  Hi Ben,

  This happens sometimes with MXI-Express:

  Error code 12 with MXI-Express

  http://forums.NI.com/T5/PXI/two-PXI-chassis-connection-with-configuration-problem/m-p/1475876#M9033

  In general, you can read this error 12 means on Device Manager:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  If it was a problem of bandwidth, PCI or PXI side, you could pull a few cards to see if that alleviates the problem, or that the link from Microsoft over the States, you can disable the driver for other cards.

• "When try to turn on my computer: Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid

  Original title: configuration of the CRA

  Hi, I got this message then try to turn on my computer:

  "Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid. "Please check the Windows documentation about the configuration option BOW and your reference manuals of the equipment for more information.

  can someone help me?

  Hi sugenghariyono,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  ·         Are you able to boot to the desktop?

  Follow the steps in the article.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  For reference:

  Advanced Troubleshooting for General startup problems in Windows XP

• Network Configuration problem

  Hello:

  Since last week, when I click on an icon, for example, the Page Home/Windows 7 does not come on the screen.  Instead, warning to appear at the top of the screen saying... Problem with Internet connection or Network Configuration problem.  After 5 minutes, or later, however, the screen came, but it is very slow to open web pages.

  This problem occurs most often during the night, however for the last two days, sometimes also during the day.

  Until this problem started out of blue, wireless connection with Comcast was very smooth-ride,... instantamously the homepage of popping up.

  Hints on this would be greatly appreciated.

  Thank you

  This sounds like a problem with your Comcast service. In the United Kingdom, I would suggest that you run a speed test on your connection speed. You can get no doubt do the same wherever you are. While it could be the quality of your line, the calendar offers it's the volume of traffic from when children arrive home from school until they go to bed.

  You could compare notes with other Comcast customers.

  http://forums.Comcast.NET/

  Hope this helps, Gerry Cornell

• Configuration problem EM on 12 c OEM

  I started working on a new client, who was a repository of grid 12 c Setup program, and they have restarted a server for maintenance. When I tried to enter emctl start agent, I received the following.

  The MA Configuration problem. /U01/app/Oracle/product/11.2.0.3/dbhome_1/servername.domain.com_oem not found.

  Is there a way to create this file? is or if I should use emca, possible that I can perform a 'regeneration' without changing the initial configuration?

  Thanks everyone, I solved the problem. I made a backup of my old profiles.xml, created a void with just header and footer information, and everything started upward normally, thank you again!

• OC4J Configuration problem. $OH / OC4J_DBConsole_IPADDR_db not found.

  Hi all

  I have a new installation of Oracle 11 g 2 m4.

  I tried several times creating dbconsole, ensuring that the environment variables are defined property and also in the response file, specifically ORACLE_HOSTNAME is set correctly.

  The emca - config... returns with success,

  but in the newspaper, it shows me the URL to control db being in the form of https:// < hostname >: 5500/em

  Under OracleHome, I have a directory in the form of < hostname > dbcontrol Private

  Although my departure db control fails with above message.

  emctl start dbconsole

  "OC4J Configuration problem. $OH / OC4J_DBConsole_IPADDR_db not found. »

  My question is since emca creates the control with the format https:// < hostname >: 5500/em , and it is properly configured in OracleHome, why "emctl" refers to IPADDR and allows me not to start dbcontrol?

  Thank you

  DP

  What is the name OS & version?

  what OS command under report

  hostanme

  can you do successfully as below

  Ping

  Ping

• Photoshop CS6 configuration problem, code 16

  So I have a PC and I come again Mac Pro 2 days (it is a little difficult of is used), and my Mom took a tech shop any to download all of these programs for me. But when I tried to open Photoshop this configuration problem keeps popping up and the code is 16. I don't know how to fix it, please help! (Also if someone could elaborate on their answer that would be great, I'm really not very good with computers).

  http://helpx.Adobe.com/x-productkb/policy-pricing/configuration-error-CS5.html

• Configuration problem of the mixture of the regions with and without installation of persistence of the disc causing the JSONFormatter to fail

  I have trouble setting my local setup correctly with a mixture of regions with different configuration of persistence of disc.  Is a configuration problem on my end or a bug in GemFire and/or Spring GemFire data?

  The configuration of my work is as follows:

  < gfe: replicated-region id = "replicatedRegion" cache-ref = "gemfireCache" disk-store-ref = "overflowOnlyDiskstore" persistent = "false" >

  < gfe:eviction type = threshold "HEAP_PERCENTAGE" = "90" action = "OVERFLOW_TO_DISK" / >

  < / gfe: replicated-region >

  < gfe:local - region id = "localRegion" cache-ref = "gemfireCache" / >

  
  

  With the above configuration, I can successfully call JSONFormatter.fromJSON (json) and get a reference to a PdxInstance object.  However, when I kinda modify configuration to enable the persistence of drive on one of the regions, the call to JSONFormatter.fromJSON (json) fails.  The change is as follows:

  
  

  < gfe:local - region id = "localRegion" cache-ref = "gemfireCache" persistent = "true" disk-store-ref = "persistOverflowDiskstore"/ >

  Without any additional modification, the following error starts occurring:

  com.gemstone.gemfire.pdx.JSONFormatterException: could not parse JSON document: [Source: java.io.StringReader@5549f0e, line: column 26,: 6]

  at com.gemstone.gemfire.pdx.JSONFormatter.fromJSON(JSONFormatter.java:66)

  ...

  Caused by: com.gemstone.gemfire.pdx.PdxInitializationException: The PDX metadata must be persistent in a limb that has persisted data. See CacheFactory.setPdxPersistent.

  at com.gemstone.gemfire.pdx.internal.PeerTypeRegistration.checkAllowed(PeerTypeRegistration.java:531)

  at com.gemstone.gemfire.pdx.internal.PeerTypeRegistration.verifyConfiguration(PeerTypeRegistration.java:515)

  ...

  Note that it is breaking while I try to get a reference to a PdxInstance, and if the code has not yet arrived at the point where I place a PdxInstance object in a region.

  Thanks for any help in advance.

  Hello

  JSONFormatter PDX uses as is the serialization mechanism from the Gemfire cache. As indicators of error, you must have your persistent PDX meta-data when you use PDX with an area that itself is persistent. Adjust your configuration as follows:

  It will use a default for PDX record store, but you can also use a specific store if you wish.

  When you use PDX, a "PDXType" is created for each class serialized with PDX and this type id is stored with the data in the region. If this region is persistent, then the PDXType, associated with this object must also be kept.

  -Jens

• OEM EM Configuration problem.

  Hello
  
  I created the database using YES. End of the installation, he showed OEM url
  Enterprise Manager 10g Database Control URL:
  http://RHEL5.myserver:1158 / em
  
  When I try to connect oem, I couldn't. then I checked
  
  * $ emctl status *.
  TZ defined on Asia/Calcutta
  The MA Configuration problem. /U01/app/Oracle/product/10.2.0/Db_1/RHEL5.myserver_TSH1 not found.
  
  
  * $ emctl start dbconsole *.
  
  TZ defined on Asia/Calcutta
  Oracle Enterprise Manager 10 g Database Control Release 10.2.0.1.0
  Copyright (c) 1996, 2005 Oracle Corporation.  All rights reserved.
  http://RHEL5.myserver:1158 / console/em/aboutApplication
  from Oracle Enterprise Manager 10 g Database Control... started.
  Logs are generated in the /u01/app/oracle/product/10.2.0/db_1/rhel5.myserver_orcl/sysman/log directory
  
  
  1. may I know, YES even created OEM, why I can't connect?
  2. I do not understand: the MA Configuration problem. /U01/app/Oracle/product/10.2.0/Db_1/RHEL5.myserver_TSH1 not found.
  
  My db_name is: orcl
  the product is 10. 2.0
  OS: redhat
  
  Thanks in advance...

  After you start the DB console, use a browser to access the console on the URL indicated in the output of the command "emctl start dbconsole":

  For example, go to URL https://rhel5.myserver:1158 / em

  In addition, if you have multiple databases to monitor/manage. Consider using MS Cloud Control.

  Doc on Cloud Control is available here:
  http://docs.Oracle.com/CD/E24628_01/index.htm

• VMDirectpath configuration problems.

  Well, I think I Passthrough (VMDirectpath) configuration problems. I use vSphere VMware ESX, 4.0.0.

  I tried to configue passthrough, so I checked Configuration-Hardware-Advanced setting and I don't found "no device currently activated for passthrough.

  I clicked on "configuration Passthrough.. ' and tick"Mark of Passthrough devices"then I found all USB devices are passthrough capable but not running in passthrough mode and PCI/PCI bridges are not able to passthrough.

  After ignoring the warnig message ('vmnic0' assignment, which used by the virtual switch 'vSwitch0' for passthrough access can make the inaccessible host and can require a lot of effort to cancel.), I marked as the relay device, and of course I've known the significant effort to cancel. :$

  I could not access the server, and the start was now available for some time.

  What I want to really know is.

  I'm looking for the correct devices for passthrough

  and what was the Passthrough configuration problem.

  Is this Client vs server problem? or materials (such as the version of the kernel or CPU specifications)?

  Anyone knows the solution or has any advice, please help me.

  Thank you.

  Kwangwon Chae

  Hi kwangwon, it seems like you just a physical network adapter on the host ESX (i) and is used by the vSwitch0 (at installation time is created inteface vswif0 here commonly called console port or management service), that's why you get this 'warning' when you try to set this for VMDirectpath pci device and also, that's why you lose your connection to your host because it can no longer be used by your esx server.

  Kind regards.

  If you find this information useful, please give points to "correct" / "useful."

  My blog virtualizacion you en idioma

• EM configuration problem

  Helllo all,.
  
  I am unabe to open OEM.
  while checking the status of the following message.
  I use win7.
  
  
  
  C:\Users\User > EMCTL STATUS
  The MA Configuration problem. C:\app\user\product\11.2.0\dbhome_1/user-TOSH_prod3 not
  found t.
  
  Please advice

  Hello

  The decline in the repo was not successful, it seems. Why not try to file correctly then continue with leisure.

  concerning