LDAP group does not map synchronization

Similar Questions

• Standard vSwitch_Custom VM (Vlan200_VM network) port group does not.

  Hi guys...

  Scnerio:

  ESXi 5.0

  VCenter 5.0

  2 connected local network cards to vswitich 0 Active\Active configuration.

  The virtual computer name: FSAPP_1

  Note: good VLANS are created externally NETWORK

  I created another group of ports VM network VLAN 200_VMnetwork.

  I have attached TWO maps LAN to VM. A LAN card is connected to the port default VM network group and another is connected to network VLAN200_VM.

  A LAN card is connected to the local network (Private IP) and another is connected to the Wan (public IP)... IF I CONNECT the TWO VMNIC "DEFAULT virtual machine network" I am able to ping both subnets.

  
  

  But any vNIC which is connected to the VLAN200_VM network is NOT working...

  
  

  
  

  Please see the attached snapsshots...

  Thank you

  I did not ask you to do what I asked you to test is the separate two VM on the host even be configured to use the VLAN 200 portgroup and verify that these two people are able to talk to each other.

  Once you've found that the books above. Go back to your network team and make the request to configure the switch in the trunk output ports (which does not remove the tag VLAN on the package on the output of the switch) as opposed to be defined as access (that strips the tag VLAN).

  It is my firm belief that the port group does not work because your switch is misconfigured based on my above statement.

• Control Panel is not on the list. Users and local groups does not appear in computer management.

  1. click on start, and then point to setting, control panel is not on the list.  When you try to get to the Panel of control via a link in Help and Support, had an error, "operation has been cancelled due to restrictions in effect on this computer.  Contact your system administrator. »

  2. local Users and Groups does not appear in computer management.

  There is only one profile on the PC, the OS is XP Home.  It seems lost his administrator privileges somehow my user profile.  Could you please suggest how to solve this problem?  Thanks in advance.

  Hi PJohnson,

  You can access the link below and follow the steps in the article to create a new user account and copy the data to the new account.

  http://support.Microsoft.com/kb/811151

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Auto answer for the members of the group does not

  Oracle Communications 7u4 - 27.01 (7.0.4.27.0) e-mail server 64 bit (built 30 August 2012)
  libimta.so 7u4 - 27.01 64bits (built 08:49:27, August 30, 2012)
  With the help of /u5app/opt/sun/comms/messaging64/config/imta.cnf (updated)
  
  Automatic response of users who are part of a group does not work when the email is sent to them through the email address for the group. If the email is sent directly to those users with their own email address then their autopreply work. Auto answer may work for users when they receive mail from a group address? If so, how can I go about setting up that?
  
  Thanks in advance.

  It is expected that mail sent to a list is not automatic response of the members of the list. This is explained, as well as possibly the means to get there, if you really want that in the following Article in the Knowledge MOS:

  How to configure the automatic response for members of a mailing list? (Doc ID 1511284.1)

• LDAP + permissions OBIEE group does not

  Try to get LDAP and row-level security work...
  
  LDAP authentication works very well and my users are authenticate without any problem. I imported my LDAP users, but want to create my groups manually iin OBIEE (and not import from LDAP). Created groups and added my users to these groups, everything is fine so far.
  
  First step is to set up some groups to not see certain elements. I thought it was as simple as the definition of permissions on a specific group - tab, add the subject areas you do not want to display and make sure that the read check box is x'd out. I did it, but the fields are still visible in the 'answers '.
  
  Am I missing something?

  Go to settings > administration > manage privileges... scroll your domains. Delete "Everyone", add the appropriate groups...

• map of iOS 9.3.1 does not map data, map only grid display

  map of iOS 9.3.1 shows no map data, only the grid, as it's on a whole new iPhone 6s.  He worked initially but has stopped working.  Shop Verizon recharge and restore.  Card then worked for a few weeks and now I am to the network only.  No indication on how to get this shit but essential app works correctly?

  Try this, go to settings > general > reset > reset all settings

  This does not erase any of your user information

• Filtering groups does not.

  Hi all

  I have a new SRA 1600 with 8.1.0.2 - 14sv and use a domain authentication with Active Directory. It works perfectly, but now I need more security with filter of ad groups. OK, I added a group among the users of > local groups > Edit Local Group 'Démo' (I get the name of the group with a drop down field, in order to perfect the work of connections) but if I try to login I get the message "no connection failed - no group appropriate found. I'm 100% sure that the group in the ad is ok. It's in the papers:

  Failed user login
  Connection failed - no group appropriate not found
  LDAP error code 1, error of search operations and will try the partial entries in LDAP.

  Can anyone help?

  Thank you, Sven

  Hi all

  Thanks for your help. I found the problem: the SonicWALL works perfectly and the problem was in Active Directory: "account/account Options / do not require Kerberos preauthentication" was checked.

  Thank you, Sven

• Software BlackBerry BlackBerry link does not support synchronization of locally stored contacts BB10 peripheral.

  Hi team,

  I just want to know if it's true that the link of BlackBerry does not support the synchronization of the contacts that are saved locally on the BlackBerry smartphone.

  Thank you..

  That is right. Cable sync with link creates a new list of contacts on the device and syncs the contacts stored in Outlook on the device and then keep their synchronization had after that.

• Definition of group does not belong to the collection

  Hi all, I hope you can help.  We have recently migrated some applications to a new host and group configurations used in the available refinements component now seem to be unreadable to short Studio.  For all applications, we get messages as follows:

  2015-08-04 09:46:22, 041 WARN [CollectionManager] group definition(key:'Action-Plan') does not belong to the collection "ATR_Detail".

  2015-08-04 09:46:22, 041 WARN [CollectionManager] group definition(key:'General') does not belong to the collection "ATR_Detail".

  2015-08-04 09:46:22, 041 WARN [CollectionManager] group definition(key:'Task-Info') does not belong to the collection "ATR_Detail".

  When we created these there is no way to set the collection for a group and in the documentation so that the SOAP API seems always to be the case: http://docs.oracle.com/cd/E40518_01/server.761/server_api_ref/endeca-server/wsdl/config/xsd/1/element/putGroups.html.

  The studio version 3.1.14220 has no difficulty to the ingestion of these even when there are multiple collections in an application, but this new version 3.1.19408 get the message above and does not display groups.

  We need to understand if:

  1. it is a bug.  If so, I have the document and present it.

  2. There is a way to specify collections when creating the groups via the web service that is not obvious from the documentation.  Maybe I'm interested in the false documentation?

  Thank you

  DIran

  We think we have found a solution that we are now stable which is that perhaps dot notation in the form of Collection.GroupName is now required to load the groups into the new version of studio.

  Diran

• LDAP Sync does not work on custom attributes

  Gurus,
  
  I installed and configured OIM 11 g release 2. During configuration of IOM, I activated ldapsync to OID.
  
  Created a custom attribute in the OID and also on OIM. But when I change this attribute to IOM, this change won't OID and vice versa. There are no errors in the logs.
  
  Please throw some light on this.

  Everything by creating a custom to IOM, attribute entitle you the label, name... At the same time, there will be an option to provide the ldap attribute name. You must provide the name of the attribute that you created in the OID here. Then only ldap sync works on custom attributes. without specifying a ldap attribute name, ldap sync wiill does not work.

  Give it a try and post your results here.

• Radio - initial value group does not properly

  I have problems with a group of Radio buttons in my form with table.
  
  Form-With-Table simple.
  Radio buttons control the ORDER byclause in the query.
  
  The form works perfect long as the user clicks on the radio button in the first PLACE.
  but the default behavior of the form does not work properly.
  
  General idea:
  
  Using a standard form with table / query.
  There is a group of radio, with 2 radio buttons.
  
  Option buttons simply control the ORDER byclause in the query.
  Button: SORT_BY_NAME - value: NAME
  Button: SORT_BY_PATTERN - value: PATTERN
  Initial value of the radio button group: NAME
  
  My problem is that when the user 'open form' and run the right query, the default is MODEL.
  No key radio. query automatically sorts by the MODEL, even if I want the default NAME.
  
  How can I change the default ORDER BY name?
  Or, how can I change form to automatically - click on the NAME button when open?
  
  Thanks in advance for your help

  Initial value does not get assigned until forms creates a record in the block whith option button.
  You can set your: radio_group: = "NAME"; at a TIME NEW FORM INSTANCE

• Calendar application does not correctly synchronize between computers

  For several days, my calendar application (part of Mail, calendar & people) was not properly synchronize between computers.  If I run the application modern calendar on my Dell laptop to update Pro Windows 8.1, at a meeting of current calendar, it seems that I can make entries but after reboot the same computer or on another computer, the entries are lost.

  I thought that the answer might be that I need to uninstall and reinstall the app Mail, calendar & people.  But when I do, I meet the download of Windows Store pending problem that never ends and you try to run the troubleshooter Windows Update store still hangs on the re-registration of the Windows store.  None of the fixes suggested in the thread on the subject works for me:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_store/Windows-8-apps-are-pending-and-never-download-from/d859c093-ee94-4581-9bdf-95e35f0c9e0c

  I am answering my own question as I've found running a registry cleaner on the affected computer registry errors found especially for Windows Store.  After the repair of the registry, Windows Store downloads work properly and I am unable to reinstall the Mail application, calendar, & people and it now correctly syncs between computers.  The registry cleaner that I happened to use that figure in the Norton Utilities 16 but I guess any other good registry cleaners might work as well.  Utility for troubleshooting Microsoft Windows Update store never work properly and that's it for me.  He would always hang on the re-registration of the Windows store.

  Microsoft must make its app Store Windows more reliable than to make a crucial Central application for Windows 8 (the application Mail, calendar & people) more robust and more functional.  I used the software to Microsoft for more than 32 years, but repeated like this with Windows 8 experiences are very encouraging.

• ERPI accounting entity group does not record

  Hello

  I tried to select some features and create a group of accounting entity. I can record it without any problem. But when I closed and reopened I see not all entities that I've associated with the group. Few of them are deselected. Also, the accounting entity group is not available for use in the Import Format. ERPI v11.1.2.2.

  Kind regards

  Brig.

  Some glitch in the system. Laughing out loud

  It is not so stable. I get a lot of questions of Java and ADF. I get errors during the recording of changes in the ERPI. But still survive with the product.

  Kind regards

  Brig.

• Allowing the CDC does not: mapping of CT

  Hi guys,.
  
  We use mappings of CT for DCC. But I'm running into some limits:
  
  1. once I enabled CDC on a source table (for Oracle 10.1), I find that the CDC Start Menu command does not work on the views and tables (without a Unique key). (We use trigger according to CDC)
  
  Is this true?
  
  Is there a solution? We have several views are sources of Oracle Apps R12 to fill the staging tables as well as tables that do not have unique keys.
  
  Thank you.

  Hello

  Yes... needs tables with the keys to the less defined in OWB.

  You can set OWB keys, they do not need to be deployed in the system... just metadata indicating CDC infrastructure what are the columns of the unique identification for the lines.

  Can also simply copy - paste the definition of the view to the node of the table.

  See you soon
  David

• GPO to map a drive (on xp sp2 and sp3 clients) based until membership in one group does not completely finish the mapping

  Hi all

  When you try to use a GPO to map a drive (on xp sp2 and 3 customers) based up to membership in a group, it is not completely finished

  Have created a GPO called MapDrive

  -Under User Config. > Preferences > Windows settings > card reader

  -Set Action = replace and it to map to \\Servername\share\%username% if the user is a member of the XYZ Group (common tab > Item-Level targeting)

  What is happening, it's that the good player cards\\Servername\share\ of under file which is the user name.

  To get the GPO to work that day

  -Did you have to install the patch installed XP from KB943729for side extensions (CSE) Client

  -J' also put a policy of waiting for connection before login (this fixes a problem of no similar mapping with the home folder that you can set the path in the user account object)

  Any ideas why the drive mapping complete otherwise would not work or have a work around?

  See you soon,.

  Schmills

  ThanksThahaseena M.

  In fact, I found that it was not a problem with what I did, in fact, it worked.

  What I found is when you map a drive via gpo to a subfolder, for example\\servername\share\subfolder

  What is displayed is\\servername\share , but it actually be mapped directly to the subfolder. In the GPO, you can create a label for the drive, so in my case I created a StorageFor_ %username% label, which then displays the user who received the file, which is what I wanted.

  My original mail can still help those who have problems with

  1 folder without mapping entirely

  2. the CST for HP patch is required for the mapping of the readers via GPO.

  See you soon,.

  Philippe