Leave replaced by lov

Similar Questions

• Issues of update/upgrade of equipment for Tecra S10-183

  Hello

  TOSHIBA TECRA S10-183
  Serial number: xxxxxxxxxxxxxxxxxxxxx
  Model number: PTSB3E-0YR04KGR
  Code BTO: P8700/2G/160G/15.4WBT/DS2/L/M/B/W/3G
  Pre-installed software: Yes [R11382GR]
  Purchase date: 13/05/2011

  I use above professional mobile phone use for CAD programming as well as for Office applications.
  2 GB RAM (standard), I can increase up to 4 GB Kingston (ex aequo) on purchase.
  With the 160 GB HARD drive, I had a lot at the beginning of the loss of speed.
  So I leave a month later to a switch of OCZ Vertex 120 GB of a second
  And lasted almost 9 months without problems.
  Now, I don't have so much free space in my SDS. So I would like to
  'Intel SSD 520 Series 240 GB 2.5 SATA III'
  Skip the leave.

  My question would be, I would get this problem?
  (1) in theory, SATA3 work perfectly well this SSD 240 GB right?
  In the manual, it is up to 120 GB SATA2 SSD in it. However, the 2009 manual. The information is very old. And at that time were not yet 240 GB free for end users of hard drives SSD SATA3.

  (2) is there any Windows Professional / Ultimate / Business 64 for 7 as this laptop?
  Original, I have Windows 7 Ultimate 32 bit. I wanted that my memory that expanded up to 8 GB. CAD program running on the 64-bit operating system much better.

  (3) is the card graphic and/or welded directly on my cell or can I leave replace it? It is a plug-in card?

  (4) can I switch to a processor / CPU? What size?

  (5) the Mobile UMTS and HSDPA / HSPAU / LTE is capable?

  (6) I still can't be on the Toshiba support site:
  http://de.computers.Toshiba-Europe.com/innovation/generic/SUPPORT_PORTAL/
  find when you enter the serial number or model number is not my laptop?

  On a response, I would be very happy.

  Sorry for the bad English. My language is German!

  So I hope that someone can help me with my questions.

  With sincere friendships.

  Etem Basoglu

  > 1) in theory, SATA3 work perfectly well this SSD 240 GB right?
  > Manually, it is up to 120 GB SATA2 SSD in it. However, the 2009 manual. The information is very old. And at that time were not yet 240 GB free for end users of hard drives SSD SATA3.

  The SATA controller is not limited in size, you can use 250 GB, 500 GB or more large hard disks. The same should be possible with SSD drives since the controller is the same.

  (> 2) is there any Windows Professional / Ultimate / Business 64 for 7 as this laptop?
  > Original, I have Windows 7 Ultimate 32 bit. I wanted that my memory that expanded up to 8 GB. CAD program running on the 64-bit operating system much better.

  Don't know what you mean exactly, but if you want to installed Win 7 64 bit, then you can do without big problems the 64-bit drivers are available on the European driver Toshiba page.

  (> 3) is the card graphic and/or welded directly on my cell or can I leave replace it? It is a plug-in card?
  The laptop seems to be equipped with a NVIDIA Quadro NVS 150 M chip graphic. This is an external chip that is connected/soldered on the motherboard. But even if you can remove this chip, the upgrade is NOT possible.

  (> 4) can I switch to a processor / CPU? What size?
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  Generally the CPU upgrade depends on the chipset of the motherboard.
  You could upgrade the processor, if the chipset would support the new processor.
  There are still questions about BIOS support, but I've read here in the forum that some people have been able to upgrade the new processor.

  (> 5) the Mobile UMTS and HSDPA / HSPAU / LTE is capable?
  Support for 3G modules appears to support the HSDPA standard

  (> 6) I still can't get on the Toshiba support site:
  > http://de.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/
  > find when you enter the serial number or model number is not my laptop?

  Maybe it is not inserted into the database, but your Tecra S10-183 belongs to the series of PTSB3E that you can search other models belonging to the PTSB3E for details

• I need to connect my HP 2200 printer for a 32-bit Windows 7 system with NO parallel port

  I have an older HP Business Jet 2200 printer coming to leave, and I love using it.  My problem is the upgrade to windows 7 and a computer-ish with NO parallel port.  I have seen cables with female parallel to USB connectors, but the cable I have has a male connector to my 2200.  I have a Dell XPS 600 former with no parallel port I want to use as a backup computer.  My system is Windows 7 32 bit.  Can someone help me? should I think about a direct stream map server thingie or I can just a cable for this?  Thank you all!

  I am VERY happy to share positive results for my project listed above.  I went on Ebay and raised his eyes to the parallel to USB cable port and found a 36 pin, which was what I needed.  I got it for next to nothing

  36 pin parallel USB IEEE 1284 Printer Adapter Cable - I got it home, plugged into the side 36 pins, the business jet HP 2200, then plugged on the side of the USB to the Dell XPS, I worked with - and immediately the cable acknowledged.  It took me a few tries to get the software and I didn't know if it was to be on the LPT or USB, so I played with both and it was released as an HPA installation, which worked like a charm!  With the fragility of the printers of today; This printer is one of the sturdies and I can still get parts for it.  He has been a workhorse for me for six years now and of course, it has been around since the beginning of the 2000s.

• Broken screen blackBerry BlackBerry of passport

  So I'm here, I don't think that I have to consider it by far, but it seems @BlackBerryHelp on Twitter can help me. I thought that I would try to waste time here.

  Then... I bought my Passport on September 26 (day out) to shopBlackBerry and have been since then, enjoy it show to friends and family and engage in meaningful interactions with strangers who were in AWE in front of his eyes and once again demonstrating its capabilities they were hooked and wanted a. I am a user of long-standing BlackBerry / RIM devices, having owned several (8790, Pearl 8100, Bold 9000, Bold 9900 x 2, Z10, x 2, a Playbook and finally my passport).

  In late may, I damaged my screen, my fault, if of course what happened was totally out of warranty. So I tried to get a replacement of the screen of my own pocket, but unfortunately the replacement didn't work as my phone was not compatible with the screen and in turn he burned the new screen and I had to return it and get my screen broke on my phone and use it for now until I realized I could do.

  I decided that since it was my fault, I would be always tender hand to BlackBerry to see if they could help me, because they would have better ability to a screen of source for me and replace it for me, and I was and am always willing to pay for the replacement, I love my passport that much and I do not have the funds to buy another , not to the price, they still order.

  June 3, I am in contact with @BlackBerryHelp, and as a first step, they have tried to redirect me to another place, not even help. But once I told them again my situation, they asked me a few details and assured me that someone would contact me 'as soon as possible. " Well now you might better understand the reasoning of my presence here. Not a single soul has contacted me back to this topic and my phone digitizer has now completely * beep * bed and I can no longer use my phone, and I am currently back up and come back in my * beep * ty Z10.

  The recent BlackBerry device covers guaranteed those of us who were early adopters and long time supporters the chance to have their device covered at a low cost in off warranty repairs occur? Not a chance, I'm left in digust I spent $808 on this brick and the manufacturer has nothing to say and don't do much to help rectify the situation.

  Where is the customer service? Where is the sympathy? What of those who have stood and spoke for those who speak negatively about this company. This whole situation has been slowly pulling me to drop everything I invested, literally and figuratively, and only join the rumor mill and buy an Android device, not a single one with a BlackBerry symbol that we put in the news right now.

  You guys have deteriorated from me, this is the FIRST time that I had to dig far to seek a resolution by BlackBerry.

  Thank you very much.

  -Jamal

  https://scontent.cdninstagram.com/hphotos-xfa1/T51.2885-15/e15/11287811_452536961572405_916497740_n...

  Due to the date of my purchase, there is no such thing as care of BlackBerry, and so, I was outside the qualifying dates of coverage, only available for devices purchased AFTER November 23, 2014, I bought on September 26. I would have gladly purchased if it were available to me. It was announced on March 16 and has the right to those who had bought their device in the past 30 days those as mentioned previously, bought their unit (classic / passport) after November 23, 2014.

  I'm not looking for a handout, I was looking for a direction to go to find a replacement screen that has been adapted for my phone. I said it was my fault, but I me reach out to the BlackBerry to get this replacement, since they have the BEST knowledge of what it takes to guide. They repair in terms of features, warranty and devices out of warranty if this is possible and profitable. With the BlackBerry plan, you actually have the option to repair your original device, so please, lets not say things that are not exactly flourishing with honesty.

  In addition, as this forum is a peer-to-peer forum where users help other users, I thought that someone, perhaps even a seasoned expert would be able to help me and offer some advice. I did all the research I could do, or I wouldn't be this far, as a guru, I expect that you have done your research as well.

• How to change the filter to the filter by another column - group calendar page 1

  Any version of the Summit either 4.2 or 5.0 - windows 7 OS

  I know it's a very simple question, but I can't understand this.

  I want to change the filter on the group calendar page 1 of the default "Event status" below

  

  The only code that I find is shown below.

  

  I added my own selection list of the button with the following code bar

  < tt > Select GroupName, group_id from EBA_CA_EMAIL_GROUPS ORDER BY GroupName < /tt >

  But when I change the selection list from one option to the other that the calendar is not sorted by events that have particular GroupName. I tried to replace the code in the default selection list and it did not work. There must be another code, check the filter.

  How can I add my own list of selection and filter calendar events based on that select list option is selected?

  Richie V wrote:

  Any version of the Summit either 4.2 or 5.0 - windows 7 OS

  I know it's a very simple question, but I can't understand this.

  I want to change the filter on the group calendar page 1 of the default "Event status" below

  I added my own selection list of the button with the following code bar

  Select GroupName, group_id from EBA_CA_EMAIL_GROUPS ORDER BY GroupName

  But when I change the selection list from one option to the other that the calendar is not sorted by events that have particular GroupName.

  Probably you meant 'filtered' rather than 'sort '?

  I tried to replace the code in the default selection list and it did not work. There must be another code, check the filter.

  In the Group APEX 5.0 calendar application, the filter is implemented in line 20 of the schedule area source query:

  select e.event_id,
        case when et.display_color is not null then
              'apex-cal-'||
              (select lower(cp.color_name) from eba_ca_color_prefs cp where cp.bg_color = et.display_color)
        end css_class,
        e.event_name,
        case when e.display_time = 'N'
              then trunc(e.event_date_time)
              else e.event_date_time
              end event_date_time,
        to_char(e.event_date_time,v('APP_TIME_FORMAT')) disp_time,
        substr (
        case when to_char(e.event_date_time,'MI') = '00' then
              ltrim(to_char(e.event_date_time,'HHam'),'0')
          else
              ltrim(to_char(e.event_date_time,'HH:MIam'),'0')
          end|| ' '||e.event_name,1,255) disp_col
    from EBA_ca_events e,
        EBA_ca_event_types et
  where (:P1_EVENT_TYPE = e.type_id or :P1_EVENT_TYPE is null)
    and e.type_id = et.type_id (+)
  

  with P1_EVENT_TYPE being included in the property of the region and by using the action Elements of the Page to send dynamic update schedule to trigger a refresh of partial page in the calendar area.

  How can I add my own list of selection and filter calendar events based on that select list option is selected?

  1 create your filter as a copy the item P1_EVENT_TYPE item.

  2. replace the LOV definition by the code you need.

  3. Add the necessary filter predicate in the WHERE clause of the query source region.

  4. Add the name of your filter element to the region of the Items property of the Page to send.

  5. Add the name of your item to the Items property in the when section of action Dynamics to update the calendar .

• First form in OA Framework R12

  Hello
  
  I have a task for a page with three Lov and press the Go button and when the user the choice between the lov with the option to leave all the lov with null and click on the Go button it must collect records.
  
  Very appreciated if someone tell me / guide me how it could be created from highy level, such as create a region with table type and three lov... etc.
  
  Yet once thanks in advance to all the world.
  
  Kind regards... Ashraf

  Hello. Create a page with the region of messageComponentLayout
  Add 3 items to this region. Types of items - messageLovInput.
  Add 3 display of data for your LOVs objects.
  Articles LOV has 2 sub-options: region of lev, where you can create the table, based on the original Version, thanks to the Wizard (right-click region)
  and lovMapping, where you can fix Return Item, field that will contain the value of lov and criteria point

• List of selection with redirection on APEX 4.0

  Hello
  I have already used the apex 3.2 a few years back and am now working on something using 4.0. I want to conditionally display a field in a form that is based on the option selected in the select list. Previously, I would have the condition set on the field to display so certain the selection was made on the selection list, and this list would be defined as a selection list with redirect, likely to view or remove the field from the screen. Now, it seems that select lis with redirect has been removed from the APEX 4.0 and replaced by LOVs cascading, which is not good that the conditional is a text field. Can someone tell me how to set up this feature?
  
  Thank you
  
  Mark

  Apex 4.0, you need to create an action show/hide dynamics, triggered when the selection list item is changed.

• Try to use GREP to truncate the names of some of the words...

  Hello

  I'm trying to find a way to GREP to select all the text strings that looks like this:

  12345678wieawoejfoiaw.jpg

  65434546wieawoejfoiaw.jpg

  23542398wieawoejfoiaw.jpg

  90989098wieawoejfoiaw.jpg

  23234567wieawoejfoiaw.jpg

  24326743wieawoejfoiaw.jpg

  and leave (replace) with just the first 8 numbers each find string.

  I remember something similar awhile back, when I break the type in some parts (such as numbers or characters and then go and get them back for the part to replace it, but I paint a white...)

  None of my friends GREP autour?

  Babs

  Top of me head * but something like this should do the trick.

  Search

  (?<>

  and replace them with nothing. We find everything on a single line that starts with 8 digits but 'brand' only non-digit so paragraph, you can replace safely with nothingness.

  You've probably used a simpler variant before, as

  ^(\d{8}).+$

  Replace with the first expression in parentheses, '$1', but mine should be more favorable to the document because it only removes and needs no more than absolutely necessary tocuh.

  * Holler if it does not work.

• 'Wild card' in find/replace changes 'any number' to ' ^ 9' instead of leaving as is.

  During a search, find/replace in indd, using the generic specification for any number (^ 9), I would have thought the change would leave the numbers in their original state but it change them all to ' ^ 9' - how can I find a large document and remove all values in dollars using find/replace - e.g. AUD 3 234 to 3234 AUD?

  Given that you have at least InDesign CS3, use GREP to search instead of text search:

  Search: AUD (\d+)\h(\d\d\d)

  Change from: AUD $1$ 2

  Or probably even better, change to: $1, $2 ~.<>

  $1 and $2 rely on the conclusions of the first and the second parenthesis.

  ~< adds="" a="" thin="" space="" between="" last="" number="" and="" currency="">

• After its replacement by the new AM a LOV in the standard page stopped work (R12)

  I spread an AM in one of the standard Oracle applications Page. After its replacement by the new AM, a LOV in the standard page no longer works.
  Do anyone have a solution for this?
  
  Thank you
  Lou

  1. you can move this code to the controller.

  2. While doing the extension must also worry about the maintainability of the code.

  3. If you do not add this to the CO, create a new AM, specify this AM to a region on your page, now it will become nested AM.

  4. you can code for call PLSQL in this new AM.

  5. you can access this CO AM and call this method.

  I recommend to call the PLSQL Co.

  -Prince
  http://princekapoor82.blogspot.com

• X 1 yoga 2016 Depot repair service or request replacement? do not leave the sleep, beep

  I am an owner of a 220 X 5 years which is still running strong.

  I wanted something more bigger and lighter. I ordered 2015 model X 1 (non-yoga)... it was a bad screen FHD (blurry text, get FHD rather get the QHD) and had problems at the end of sleep. Lenovo sent me a replacement, had the same problems, I sent both back. No problem with the return of the process, very easy and free because they were defective.

  Now, I ordered a 2016 X 1 Yoga because I want to be great and show my touch 360 degrees swivel screen of pretty girls in my class. The QHD screen is amazing, looks like a macbook pro retina display. I close the lid or put the laptop in standby mode, open the lid, it lights up with black screen and beeps 4 beeps three times (each time that I SLEEP there). I have to manually hold power button to restart the laptop. Nice! Also, sometimes the display driver hangs and gives a prompt telling me it crashed. Another thing is that, sometimes, when I put it in Tablet and back in portable mode, mode considers its still in tablet mode. Other issues, I noticed in the day to use it... no idea what else is yet to come lol... the laptop is so so so awesome, for real numbers.

  That said, should I send in Lenovo Depot repairs or get a replacement? I read bad reviews about the Service on this forum. At the same time, I don't want Lenovo to send me another faulty laptop, as was my experience with my X 1 (non-yoga).

  What should I do?

  Lenovo has released a version of BIOS, v1.10, which resolves failures to exit the mode standby 1 Yoga X and X 1 carbon 2016 (types of Machine: 20FB, 20 CF).

  Version 1.10

  [Problem resolves]

  -Fixed an issue where the computer cannot find a normal sleep

  State because of the incompatible BIOS setting of the security chip.

  It can be downloaded here: http://support.lenovo.com/us/en/downloads/DS111756

  Thank you

• replace the uniqueness and leave those in expressions

  Hello

  I'm looking for beautiful and elegant solution to my problem. Let's say I have a string "e + exp (e)". I want to replace all 'e' by '1', except for "exp". I tried to use regular expressions, but I failed an hour later... The solution should be able to resolve things like replace "a" to "r (a)" without changing the rand. Basically, I need to replace the uniqueness without replacing those words or phrases.

  Any ideas?

  No time for elegance now, just brute force.  I would touch the string with spaces at each end to remove end cases and then look for the character surrounded by non-alphabetiques characters.

  

• Replace Lov pop list by using customization/extension

  Hi all
  I want to change a lov to the selection list. I get the following problems...
  
  The lov is region external lov.
  
  The original version to use for the selection list (seeds VO) is not attached to seeded AM which is root AM.
  Since we cannot extend the AM root, I am unable to attach the original Version required to AM.
  
  To achieve what approach should I follow?
  
  
  Kind regards
  RAM

  You can create an element of messageChoice using personalization. Enter the definition of VO (full path of the View object). Needless to say this VO at the AM. Hope you are clear that attribute you intend to use as a value attribute and that is as a display attribute.

  Points to note are. In case your Lov VO has a connection setting, you need to include the list of choices in the AM, because the connection must take place.
  Make sure that the other features offered by the Lov mappings are supported in some way. You may lose functionality otherwise.

  Let me know if encounter you problems. Must solve it together.

  Concerning
  Sumit

• HP 110: I love HP product just can't leave my HP just like that

  My HP laptop hard drive crashed I bought another, then after three months I tried to install it but the password pop up after three attempts then fatal stole massage came up with a code CNU9388753 now am failed need yo help

  How yu install a computer that does not have a CD ROM
  Can flash installation disk

• Help!  I hate the new update.  I love type horizontally when replying to text messages, and now I can't!

  I hate the new updates!  I love type horizontally when I text and now I cannot since this morning when I did the update.  When I turn the screen all these pre's words come as 'Hello' help!  I want to go back before update!

  srvhtv wrote:

  I hate the new updates!  I love type horizontally when I text and now I cannot since this morning when I did the update.  When I turn the screen all these pre's words come as 'Hello' help!  I want to go back before update!

  Sorry, downgrade ios only is not supported by Apple.

  You can leave feedback here http://www.apple.com/feedback/