Leaving aside the GREEN, GLOBE, PSAV, JA, J.E., JL... PLL...

Similar Questions

• I need help burning a cd from Director of windows. When it burns, it leaves aside the last few photos on the cd.

  All the music Burns fine on the cd, but for some reason, simply of turns black towards the end of the program, leaving aside the last pictures of the film.  I need help!

  You may add too many files on the CD.
  And a project too complex can cause problems...
  too many transitions, effects, splitting, etc...

  And... It may be useful if you are going to... Tools / Options /.
  ... Compatibility tab and left click to restore all
  Default button.

  One or more files also may have compatibility
  questions:

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  Try to save the project in the. WMV video format
  in a folder on your hard drive and then burn the
  . File WMV to CD using other software.

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  See the following article:

  Movie Maker - video recording on a CD - R, CD - RW.
  http://www.windowsmoviemakers.NET/tutorials/HowToSaveCDRom.aspx

  The free software CDBurnerXP allows you to burn your video
  file on a data CD.

  CDBurnerXP
  http://CDBurnerXP.se/
  (Yes, it works on XP, Vista, 7)

  CDBurnerXP - create data disc
  http://CDBurnerXP.se/help/data/compiledata

  And... If you decide to create a video DVD... the
  following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.Digital-Digest.com/software/download.php?sid=1246&SSID=0&did=2
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Leaving aside the second records when a join is successful...

  Hello
  
  I built a stored procedure that takes 3 parameters:
  -Start date (to_date (December 18, 2008 "," dd-MM-yyyy ""))
  -End date (to_date (December 15, 2008 ',' dd-MM-yyyy ""))
  -User name (sysur_auto_key = 100)
  
  This corresponds to the request at the bottom of this post (the parameters are hardcoded).
  
  The query takes each part of 30 minutes between the start and end date and joins EXTERNAL, related records.
  This is data that I am currently getting with the query below. As you can see there are two rows with START_DATE 16/12/2008 12:00.
  
  I would select 1 only one record per START_DATE. If the join cannot be made there is always 1 plug. When the join is possible however a second row is selected with the corresponding joint field. I want to only select the line where the SYSUR_AUTO_KEY is null when the join CAN be made... Is this possible?
  

  TO_CHAR(START_TIME,'DD-MM-YYYYHH24:MI') STOP_TIME                 SYSUR_AUTO_KEY         
  --------------------------------------- ------------------------- ---------------------- 
  16-12-2008 08:00                        16-12-08                                         
  16-12-2008 08:30                        16-12-08                                         
  16-12-2008 09:00                        16-12-08                                         
  16-12-2008 09:30                        16-12-08                                         
  16-12-2008 10:00                        16-12-08                                         
  16-12-2008 10:30                        16-12-08                                         
  16-12-2008 11:00                        16-12-08                                         
  16-12-2008 11:30                        16-12-08                                         
  16-12-2008 12:00                        16-12-08                                         
  16-12-2008 12:00                        16-12-08                  100                    
  16-12-2008 12:30                        16-12-08                                         
  16-12-2008 13:00                        16-12-08                                         
  16-12-2008 13:30                        16-12-08                                         
  16-12-2008 14:00                        16-12-08                                         
  16-12-2008 14:30                        16-12-08                                         
  16-12-2008 15:00                        16-12-08                                         
  16-12-2008 15:30                        16-12-08                                         
  17-12-2008 08:00                        17-12-08                                         
  17-12-2008 08:30                        17-12-08                                         
  17-12-2008 09:00                        17-12-08                                         
  17-12-2008 09:30                        17-12-08                                         
  17-12-2008 10:00                        17-12-08                                         
  17-12-2008 10:30                        17-12-08                                         
  17-12-2008 11:00                        17-12-08                                         
  17-12-2008 11:30                        17-12-08                                         
  17-12-2008 12:00                        17-12-08                                         
  17-12-2008 12:30                        17-12-08                                         
  17-12-2008 13:00                        17-12-08                                         
  17-12-2008 13:30                        17-12-08                                         
  17-12-2008 14:00                        17-12-08                                         
  17-12-2008 14:30                        17-12-08                                         
  17-12-2008 15:00                        17-12-08                                         
  17-12-2008 15:30                        17-12-08                                         

  The query
  

  See post further on for directly runnable example

  Published by: user574699 on December 2, 2008 06:12

  It looks like a use of the function analytic lag for me.
  Basically, we ignore all values where the offset is not null, indicating that the previous line was of real value

  with
  MONTHS as
      (select TO_DATE('15-12-2008', 'dd-MM-yyyy') + ((ROWNUM-1) / (24*2)) as DT
         from DUAL
         connect by ROWNUM <= ((TO_DATE('17-12-2008', 'dd-MM-yyyy') - TO_DATE('15-12-2008', 'dd-MM-yyyy')) * 24*2) + 1),
      TIMES as
      (select DT as START_TIME,(DT + 1/48) as STOP_TIME
      from MONTHS
      where TO_NUMBER(TO_CHAR(DT,'HH24')) between 8 and 15
      and TO_NUMBER(TO_CHAR(DT,'D')) not in (1,7)
      ),
      EP_PLAN_R as (
        select
          249243 EPPR_AUTO_KEY,
          4 WOK_AUTO_KEY,
          to_date('16-12-08 13:00', 'dd-MM-yy HH24:MI') NEED_DATE
        from
          DUAL
        union all
        select
          249244 EPPR_AUTO_KEY,
          4 WOK_AUTO_KEY,
          to_date('16-12-08 13:00', 'dd-MM-yy HH24:MI') NEED_DATE
        from
          DUAL
      ),
      EP_PLAN_R_M as (
        select
          249243 EPPR_AUTO_KEY,
          100 SYSUR_AUTO_KEY
        from
          DUAL
      )
      select start_time,stop_time,sysur_auto_key from
  (
  select start_time,stop_time,sysur_auto_key,
  lag(sysur_auto_key,1,null) over (partition by start_time order by start_time asc) thelag from
  (
    select
      TO_CHAR(START_TIME, 'dd-MM-yyyy HH24:MI') START_TIME,
      TO_CHAR(STOP_TIME, 'dd-MM-yyyy HH24:MI') STOP_TIME,
      EPRM.SYSUR_AUTO_KEY
    from
      TIMES left outer join EP_PLAN_R EPR on START_TIME = EPR.NEED_DATE
      left outer join EP_PLAN_R_M EPRM on EPR.EPPR_AUTO_KEY = EPRM.EPPR_AUTO_KEY
    where EPRM.SYSUR_AUTO_KEY = 100 or EPRM.SYSUR_AUTO_KEY is null
    group by START_TIME, STOP_TIME, SYSUR_AUTO_KEY
    order by START_TIME ASC
  ))
  where thelag is null
    ;
  

• SeaMonkey E-mail seems to leave out the spaces between the words from time to time. How can I fix? I use version 2.14.1.

  SeaMonkey Mail: When I type a paragraph of text in an e-mail message, send it to myself.
  and read it, I find that SeaMonkey merges occasionally words together leaving aside the space.
  The original text has spaces, but the received text is not. I am using 2.14.1 and were
  only for the last month or so to have this problem. At around the same time, I noticed
  only SeaMonkey started underlying parts of the words in red. This happens when I go back
  to correct a misspelled word. If these problems are linked and how to fix? I must
  reloading SeaMonkey? The same thing happens when I run it in safe mode without addons.

  This is the Firefox support forum. Help with SeaMonkey, try asking in the forum MozillaZine SeaMonkey support, here:

  • http://forums.mozillazine.org/viewforum.php?f=51

• When I type or paste a URL into the address bar or select a url from the address bar dropdow, the "enter" button does nothing. I have to press the green arrow to load the url?

  Each time it manually to enter a url, past a url, or select a url from the address bar, the system requires that I click on the green arrow to go to the url. The entrance to key doe nothing. Am I the only one having this problem?

  This problem may be caused by an extension (possibly AVG Safe Search) which does not work properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  In Firefox 4, you can use one of them to start in the questions to troubleshoot Firefox in Safe Mode:

  • Help > restart with disabled modules
  • Hold down the SHIFT key while double-clicking the shortcut from the desktop Firefox (Windows)
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Why I have to click on the green arrow in the location bar instead of pressing ENTER to invite the new Web page to load?

  When you enter a web page (for example, www.aol.com) I would normally hit the ENTER button on my keyboard and opens the Web page of aol. However, using Firefox 4.0.1 on my desk, I have to enter the webpage (e.g., www.aol.com) and then use the mouse to right click on the tab of the green arrow to the right of the address bar. This is not the case on my wife's cell phone, however. And it uses the same version of Firefox.

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  In Firefox 4, you can use one of them to start in the questions to troubleshoot Firefox in Safe Mode:

  • Help > restart with disabled modules
  • Hold down the SHIFT key while double-clicking the shortcut from the desktop Firefox (Windows)
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Want to return to the default color, so I can stop seeing the Green and purple faces borders

  I only had my computer for two months.

  I'm playing with the colors, and now I can't go back to the default colors. I managed to get rid of the purple text, but cannot get rid of the Green faces with everyone, stories in my own personal photos.

  I SEE everywhere is purple and green.

  I took many choices by going to "customization", but all I want is to go back to normal / default. I don't want text and colorful faces!

  I've been in Control Panel > appearance and personalization > personalization.  I don't want this COLOR; I just want what it was when I bought it.

  Thank you, Bill, but the instructions in the link you gave said I must have an administrator account; I don't.

  I called Dell tech support today and this guy couldn't have known what to do after an hour of playing with it remotely. He wanted to send me a label and I could box it upward and send it to them.

  He put me on hold, and I just hung up.

  Then, I took it back where I bought it.  This store asked me to leave it for a week.

  So I went with the computer and sales one of the guys to let me use his computer to get onto a chatroom with their own technical support.  Their tech support guy had me do an uninstall of graphics and then reinstalled.

  It worked. Yay!

• The "green dot" lens flare in the iPhone 7 / iPhone 7 more

  I wrote on 'green point' lens flare issues I have with my iPhone 6 Plus. See Green dots in the iPhone 6 more photos - it's something that can be fixed? photos, for example.

  I was hoping that this problem has been resolved with the new iPhones, two years later. But as I see in this review of the iPhone 7 - http://www.techconnect.com/article/3122614/iphone-ipad/iphone-7-review.html?utm _ source = Sailthru & utm_medium = email & utm_cam... - if you look at the car first two photos, the author shows 'green point' stray light is present in the iPhone and iPhone 6s 7 photos.

  So I'm disappointed to see that this problem has not disappeared.

  Does anyone know if this is also the same with the iPhone 7 Plus, which has two glasses?

  Just wondering if any iPhone 7 more users have been able to test this.

  Before the upgrade, I would like to know if the "green point" lens flare problem that exists with the iPhone 6, iPhone 6 Plus, iPhone 6s, 6s iPhone more and apparently also with the iPhone 7 also happens with the iPhone 7 more.

  It has a system of different lenses, so I'm curious to know if this problem persists or not.

• My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green.  Wifi continues to operate even when the light is orange flashing.  Anyone know why this is happening?

  My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?

  The next time you see the flashing light amber...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Express

  If you see a button update, click on update the firmware on the airport

  

  Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.

• Numbers can view 2 leaves at the same time yet?

  Apple added the ability to see the two leaves of the same document numbers at the same time yet?

  This is a pretty fundamental and essential usability feature.

  Any help appreciated - I'm currently pawing back from sheet to sheet and it is a brutal usability experience.

  Hoping that I missed something simple.

  See you soon

  I suggest opening a completely new instance of numbers by using the terminal command:

  Open /Applications/Numbers.app - n

  the "Terminal" application is in the folder/Applications/Utilities

  then in this second instance of numbers, discovers the same document while selecting the sheet of 'other '.

  This seems to work OK with two monitors.  If you have only one monitor, then you must be small enough to fit windows.

• I read the excellent instructions, but cannot locate the green arrow to start the download! I did not accidentally remove the arrow, because he was never

  I went on the Mozilla site to download to my Mac. I read the excellent instructions, but cannot locate the green arrow to start the download! I did not remove accidentally the arrow, as it was never there to be seen. I use Safari and don't have Firefox on my MAC (to my knowledge).

  Thank you

  PS: I clicked on the 'automatically add' and downloaded the file, but when I tried to open it, I get the message "Safari cannot read this file. Cool, huh?

  See how to install Firefox on Mac.

  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac
  • http://KB.mozillazine.org/Installing_Firefox#Mac_os_x

  Open the Firefox disk image file and drag the Firefox program into the Applications folder on your hard drive.
  Do not double-click the Firefox to run from the disk image, but instead, drag it out of the DMG file.

• Why the green light on my magic keyboard and mouse flashes green when I turn on after replacing the batteries?

  Why the green light on my magic keyboard and mouse flashes green when I turn on after replacing batteries (and not connect to the computer; battery tested good tester)?

  Simply indicates that the devices are on.

  Barry

• FaceTime Camera: the green light next to the camera makes a slow blink, and there is no picture

  MacBook (retina, 12 inch, early 2015) El Capitan 10.11.5 now ongoing enforcement.

  Whenever I try to access the camera FaceTime (FaceTime, Photo Booth Apps) the green light next to the camera made a slow blink, and there is no picture.

  The system report > camera > model ID: Apple camera VendorID_0x106B ProductID_0x1570

  The numbers of the vendor and the product are correct?

  The camera worked for 6 months passed and I used FaceTime several times without problem.  Several users are affected.

  None of the recent changes to the system.

  Since the problem began, I have:

  (1) installed Skype to see if one application other than an Apple app had a camera problem. Skype has no camera or.

  (2) improved 10.10.4 to El Capitan Yosemite.  Hoping that the upgrade would reload the application Face Time.   No change in symptoms

  (3) reinstalled the El Capitan using the OS X Internet recovery.  I have not used the time Machine.

  (Note for everyone, it was simple and painless and does not need to reinstall applications.)  I want to reinstall MS OS was too simple)

  (4) several other threads suggested to reset NVRAM and SMC memory, even if they do not seem to be associated with the prob. who - without success here tried either

  Any advice to determine whether it is hardware or software?  Still dig while you wait for a response.

  Note: This problem is not resolved

  Also, over How to troubleshoot the iSight - Apple Support .  Any assistance to the problem.

• What does the green check mark when you change the info from an average of song?

  I imported an album in ITunes, I bought on Amazon and for some reason, adjust the volume slider is all the way up to + 100% on all of his songs. Whenever I try to change this back to normal, a little green check mark next to it. When I click on it, it is up to + 100%. When I ignore it and click on OK, he returned to high volume and won't let me change it. The green check mark means something? How should I do? I don't want to have my ears bleed whenever a song from the album appears when I shuffle. And I really like this album.

  

  The green check mark recognizes that there is a change of treatment. At this point, you must click OK if you want to accept changes or Cancel if you do not.

  In some cases, iTunes will not commit a change if the file is read-only or your account does not have sufficient permissions to make changes. See fix for iTunes for Windows security permissions , if necessary.

  TT2

• How to enlarge my email using the green button

  When I brought to compose an email I get what looks like a sheet of A4 paper in the top left are 3 "buttons" red to close the leaf, yellow for minimize the sheet and I used to have a green button which allowed me to expand the map, but somehow it does not work - how to restore the function please?

  If your Mac is running v10.11.3, update your system software, then try the green button.

  Click on your Apple  top left of your screen.

  In the drop-down menu, click on about this Mac

  Make sure the "View" tab is selected, and then click software update.

  Your Mac may restart several times during the update. That's ok.

  When it's done, try the green button in mail.