I need help burning a cd from Director of windows. When it burns, it leaves aside the last few photos on the cd.

Similar Questions

• Ago 10-15 second delay after you have clicked on a link from any application Windows 8 Metro... before opening the web browser.

  Title explains the problem: ago 10-15 second delay after clicking on a link from any application Windows 8 Metro... before opening the web browser.

  Any browser (IE, Chrome, etc.). Any application as long as it's a subway app (mail, etc.). If I click on a link to a Web page from any metro Windows 8 app it is 10-15 second delay before its opening.
  I tried to repair Windows, disable Windows defender, and a bunch of other things and nothing is set.
  Anyone have any ideas?
  Thank you!

  Hello

  Try to manually configure the DNS servers in the network card settings (guide: http://www.plus.net/support/software/dns/changing-dns-windows-8.shtml).
  It fixed the problem for me.
  Apparently it has something to do with the reuter incorrectly redirect DNS queries (I use D-Link).

• Need help to recover data from registry to update to Windows 8.1

  So I'm quite a pickle here. I need to update my computer Windows 8.1 but the installer of Windows 8.1 (app) do not like it when you have made changes to the registry.

  I'm running an SSD 128 GB as my main boot (c :)) drive
  Along with that I am running a 2 TB HDD as my main storage to store any (e)
  To make this work I had to change the locations of the registry for Program Files and Program FIles (x 86) file, so that my SSD would not fill.
  But while doing this, I've never done a backup of the original registry to restore to the.
  I really need 8.1 Windows for Visual Studio.
  Sidenote. I built this PC by myself
  Data sheet:
  Core i7 3870
  ASUS P9X79 motherboard
  EVGA GeForce GTX 670
  Boot drive for the SSD 128 GB
  Storage of 2 TB drive
  Windows 8

  (You can help hope)

  Hello

  Microsoft does not recommend changing the registry entries of Program files and the data folder drive C: as it has very high chances of failure. This is why it is not recommended to take this path, unless the changes are cancelled.

  To cancel the changes you have made, you must refer to the guide or the steps you followed to move the location of the program files and revert the changes exactly in the order given earlier.

  If you have made changes recently, you can restore the computer before changes to the registry and check if it helps.

  How to restore, refresh or reset your PC

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Important: System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Hope this information helps. If you have any questions, please let us know.

• I need to burn a copy of the photos of e-book and face, my pkone help

  My son spent and I have photos sent by email and face book I have vista, when I plug in my phone there is no prompt for me to follow / I have a black burner and cd what do I do?

  First... to determine where are the pictures.

  Do you mean that some pictures are attached to e-mail messages?

  And a few photos on your facebook page?

  And a few photos are saved on the memory card in your phone?

• Need help importing music mp3 file to my windows movie maker

  I've added music files to my films on windows, Director of music from cd that I ripped to my Windows Media Player, never had any problems.

  Today, I bought several songs from Amazon mp3 in order to add to my Windows Movie maker, and they will not import the Windows Movie Maker program.  They play on my Windows Media Player, however, will not import Windows Movie Maker.  The files say they are mp3 files and Windows Movie Maker says he takes these files, however, I get aRED X and the message 'could not be imported'.  Help!  What can I do to get these files to import to my movie on Windows Movie Maker.

  Thank you...

  I put the questions about music and its forum.  I really need help importing MP3 files that I just bought today from Amazon for the sole purpose to add to my movies in Windows Movie maker.

  In the past I have imported music music files that I ripped to CDs.  Now, today, I tried to import music files MP3 to Windows Movie Maker and it will not import files.  I get a message says"could not be imported" and a RED X.  Window Movie Maker, says it accepts MP3 files, but it does not accept these MP3 files.  Help!

  Thank you...

  ======================================
  Movie Maker may have problems of compatibility with MP3
  files... may be worth a try to convert MP3 files
  to WMA before you import into Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory (the file you want to download is: > FFSetup260.zip
  (FWIW... installation..., you might want to
  Uncheck the box 'all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your MP3 clips on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• HP 15-f209wm with Intel Celero: need help with a unusual amenities. Install windows 7 on a new computer windows 10.

  Hello
  
  I am really puzzled here and need help you guys!
  
  A friend of mine, who is not computer savy is used to windows 7 and would like to 'return' in Windows 7 to a windows 10.
  She recently bought a new computer:
  Black HP 15.6 "15-f209wm with Intel Celeron N2840 4 GB memory 500 GB (windows 10)

  And had me working on it to install it as a Windows 7.
  The problem that I didn't forsee is that after I installed wiondows 7 Nothing worked because all the installed drivers were too 'new' for the Windows 7 operating system at least that is what I think the problem is.

  The main thing that doesn't work is the USB ports and Wifi,
  and I cannot find drivers to make this 'connection', this 'bridge' of sorts between Windows 7 operating system and the hardware inside the computer.  And I can't find solutions on the net!

  An idea that I'm trying is to copy and paste drivers from another computer Windows 7 HP, on it. But I don't know if that's going to walk.

  I am really confused with this and need your expertise!
  
  We thank you in advance.

  * Note *.
  This computer has not been upgraded from a previous version of Windows.
  I tried the Driver Booster to see if it would be the auto scan, detect and install fix it but it didn't.
  I got the Lan/Ethernet is finally working.

  Hello:

  This driver installs usb, not the chipset driver controllers... (the last driver that I posted on my first answer).

  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/25687/us B-3-0-Intel-USB-3-0-Driver-for-Intel-NUC6i-x-SY

  According to the specifications of product for your laptop, the USB driver above must have worked.

  If the usb driver 3 above fails to install the usb controller...

  Please view the the hardware ID for the USB controller requiring driver.

  To find the hardware ID, go the Device Manager and click on the usb controller requiring driver.

  Then click on the Details tab in the upper part of the window of the USB controller.

  Now you will see a drop-down list of property, and it will be set to the Description of the unit.

  On this list and select the 2nd (Hardware ID).

  After the first string of characters you see in the window.

• Need help solving any internet connection. This happened to me several months ago and the supplier

  Need help solving any internet connection. This just started today, but it's happened to me several months ago and at that time the provider thought it was software related and suggested that I have to contact HP. I have a HP 2006 m7674n, Windows XP. For several days, I worked with HardBeatZ on a different issue that has been resolved today. However, for several days, I had been working msconfig to track down the cause of the problem; This resulted in several reboots the computer - this would have something to do with it? Also, I just started getting a RUNAS box popping up. HardBeatZ has provided a link to a possible solution to this, but since I can't do internet connection I can't get the fix. Right now I'm on a laptop with Wi - Fi for the same service internet/modem as my PC. I changed nothing onmy PC in the last days of several for the internet connection or services.  I always use eithernet connection from the router to the computer. I tried Wi - Fi today with my PC but not connect. I tried to unplug the router and reconnect but it does not solve the problem. I did a Network Diagnostic and printed the report; Here are the warnings and error messages in this report:

  1. under the terms of the bridge diagnosis; Warning: "www.microsoft.comcould hostname not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: ' 12007 connection error at www.microsoft.com: the server name or address cannot be resolved. " and the error was unable to establish a connection.

  Still under network adapter diagnosis; It shows the connection status of network as "connected."

  Also, I have an older computer that I connected with eithernet and was able to connect to the internet but has been disconnected because the version of Windows is too old to support the connection. But I could briefly connecting on HP website before you log out. The point being I think it's a computer problem and not an internet router or provider problem.

  I read a few entries on this site and it seemed that the recovery of the system was the only solution. I hope that there are other things to try before I resort to that.

  I would appreciate any advice on the steps to diagnose the problem and insight as to what may have caused this to happen. Thank you. dt2012

  Sorry... still with you... OK, we know that your network card is good and we know that your first post;

  1. under the terms of the bridge diagnosis; Warning: 'host www.microsoft.com name could not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: "error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved." and the error was unable to establish a connection.

  4. still under network adapter diagnosis; It shows the connection status of network as "connected."

  For me, it seems that Internet Explorer is corrupted or damaged. Your computer is shipped with Microsoft Windows XP Service Pack 2 Media Center Edition 2005 but since you can have updated to XP SP3 or upgraded to a newer version of Internet Explorer. Please try the options listed in this document to Microsoft titled "how to reinstall or repair Internet Explorer" , since there are several options depending on your system configuration, please post if you need help to solve your problem.

• I have a new computer and I need help, download of lightroom on my computer. I also want to make to the latest version

  I have a new computer and I need help, download of lightroom to my new computer. I also want to upgrade to the latest version.

  Hi Giovanniv,

  Please download and install the updates for Lightroom from following link: keeping up-to-date for Lightroom

  Concerning

  Tanuj

• Need help to understand. What happens on Windows Vista does more update after 2016

  I have Windows Vista with its old IE9. It has been good to me, now his ring as it time to go another computer, because Yahoo or chrome after 2016 will receive the update of security to browsers there are? Is this good? As I said I need someone to explain this, and what are my options, I thank you for your time

  Dimension 9200 / XPS 410 DXP061 with Core 2 Duo E6300 can go all the way windows 10 pro.  Yes the XPS 410 will accept and use fully all 8 GB of RAM when you run a 64-bit operating system. I currently have 8GB.

  So, if you upgrade to a modest Radeon HD 6450 from asus. You're good to go.

  

  http://www.Newegg.com/product/product.aspx?item=N82E16814121439

  Work in all models except USFF because USFF has no video slot.

  Will not harm your diet or your portfolio.

  https://www.ASUS.com/graphics-cards/EAH6450_SILENTDI1GD3LP/

  Original version of windows 7 8 10 is $ 109

  The Pro version is $ 199

  Versions OEM a little less.

  Don't forget that you can get an older OptiPlex as a GX620 or best 745 755, 760, 780 WITH Windows 7 for $100.

  Towers of Insipiron 3847 used are less than $400.

  My 3847 with 16 GB DDR3 ram is quite a bit faster than a XPS 410.

• Need help to find driver for HpG42 - 459TX 'window 7' '.

  I just format my lappy since its infected with the virus, but I can't seem to find a driver for this model.

  my English is worst, I'm sorry

  Hello

  All the drivers you need are the following links, depending on whether you have the 32 bit or 64 bit OS installed.

  32-bit Windows 7 drivers

  Windows 7 64 bit drivers

  All the best,

  DP - K

• Having a problem of home movie from Director of Windows on a dvd.

  I'm trying to publish a movie on dvd.  The encoding has frozen.  So, I'm now trying to publish to this computer.  That won't happen either.  It says the following: WMM cannot publish to the specified location.  Check the original source files in your movie are still available, the publishing location is still available, enough free disk and try again.  There is enough free space on my computer, the location of publication is the computer and the used files are still there.  Help, please.  Do not know what to do to get this movie on DVD.

  Hi regshan,

  Welcome on the site of Microsoft Windows Vista Community.

  Causes of the error message:
  -Moved or renamed the files or folders you used original
  -Computer memory inadequate for the complexity of your project, combined to tasks other than your computer is done as it makes the movie.
  -By using the source files that do not work with Movie Maker, or are corrupted.
  -Required Codec may be corrupt / missing
  -Most of the problems of this type are linked to source incompatible, ether video, audio or image files

  Suggestions to overcome the error message:

  1: reduce the size of the movie file
  2: reduce the Movie setting size
  3: increase the size of the swap file
  4: save the movie in smaller Sections
  5: save the movie in a lower resolution.
  6: Download and install the latest video codec pack to fix.
  7: converted all files in .wmv files and works well.

  I also suggest you to reference the link to the KB article that has the error message when you try to publish a movie using Windows Movie Maker in Windows Vista: 'Cannot complete publish movie': http://support.microsoft.com/kb/930435

  Check reference links:

  Publish a movie in Windows Movie Maker: http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker
  Solve problems with publishing a movie to your computer: http://Windows.Microsoft.com/en-SG/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Adobe need help me solve writing from right to left

  I am from Xinjiang, China... .the designers of this erea especially need to write right to left in particular while we text layout (Uighur, kazakh, kirghiz)...

  I know photoshop could write from right to left... but indesign, illustrator could do that even they update CC 2015 which is unbelieveble... I have attached an img on what I need... .hope someone can see this and that support...

  .

  To fully use the RTL composer, you need a language version that is capable of it:

  https://helpx.Adobe.com/Illustrator/using/Arabic-Hebrew.html

• Need help with Duplex printing from Photoshop 7

  I have a Konica Minolta Bizhub C224e, and I can't do Photoshop 7 double-sided printing. Help, please

  PS is not configured to do this.

  There is a work around.

  Your pages as separate PSDs and NOT a document with a layer for each page, then click on configuration file > automate > PDF presentation.

  Check Add open files (so only have the pages you want to open) Document of several pages of tick then save, I chose JPEG and high in the options.

  You will find yourself with a multi page PDF that you should be able to print from. I suspect that there will be a script for this a layer unique multi DSP.

• need help burning YouTube slide show on cd...

  I can download & save & play in Media Player, but it won't burn Disc... also, am I able to isolate/delete some slides?

  I can download & save & play in Media Player, but it won't burn Disc... also, am I able to isolate/delete some slides?

  ===================================
  I'm guessing that the file is in .flv format? If you convert
  the file to WMV format, you should be able to import
  in Movie Maker and edit.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (the file you want to download is: > FFSetup250.zip
  (FWIW... installation..., you might want to
  Uncheck all of the boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  In Movie Maker, drag the video on the timeline and split
  the video on each side of the unwanted part and right
  Click on / delete it.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• BlackBerry smartphones, that I need help to transfer data from a 9870 "BOLD" for a Blackberry Curve 9300 Blackberry

  Hi, I have used a Bold 9870 for a few months now. I've been saving my camera on my computer periodically. Unfortunately, it has been exposed to water the weekend and unresponsive. I transferred my acct (by Sasktel) to the Blackberry curve of my son he no longer uses. (I'm drying my "BOLD" in a bag of rice and I hope that it will work again in the coming days?!).

  My question is did anyone know how I can get all my information backups "BOLD" (contacts, emails, texts, bbm surveys) and get only their transferred on the curve that I currently use. I feel completely lost without it!

  Thank you for your time.

  Hi shelran,

  Welcome to the BlackBerry support community forums.

  It's very sad to hear of your soaked BB device. I hope it still works!

  Check the article below to learn how to restore the data on the device-

  • KB03953  How to back up and restore data to a new BlackBerry smartphone
  • KB13428  Transfer files from one BlackBerry smartphone to another backup by using the backup and restore tool
  • KB10339  How to use BlackBerry Desktop Manager to restore the data to a BlackBerry smartphone from a backup file