Length of file properties is not rendered video clip

Similar Questions

• Right-click on the file properties does not not work or opening

  When I right click on a file or folder and then drag the cursor to the "Properties" section, nothing happens when a click to open it.  What can I do to fix this?

  Hello

  ·        This happens with some files or all files?

  ·        What kind of file is it?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What happens when you click on the file properties? You get the error message?

  ·        You are able to access the propertied file in safe mode?

   

  Method 1:

  Step 1:

  I suggest you to check in safe mode if you are able to access properties of files. Follow the steps mentioned below to start in safe mode.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the boot menu and press ENTER.

  c. right-click on the file and check if you're able to access the properties.

  If you are able to access the properties then I suggest you do a clean boot and check. Follow step 2.

   

  Step 2:

  Perform a clean boot and see if the problem is resolved.

  Follow the steps mentioned in the article given below to configure the system to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 article to start the normal start

  Method 2:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  d. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  e. audit % complete.

  f. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 3:

  Check in the new user account, you are able to open the file properties. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Media Player will not play "video clip.

  Ive recently bought a car with a camera who writes on a microSD card.

  Yesterday everything worked absolutely fine when you view images in Media Player, but today, he won't play at all.  I just get the message "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file"it comes on every video taken today, but as I've said above, all the yesterdays work very well and they are all the same type of file.

  Is there a problem with the card or files, or do I need something in Media Player.

  Please help, its very frustrating.

  Thank you

  Sounds to me like the problem likely exists with the files.  Maybe they don't have copy to or from the card properly, or maybe the card has reached the end of its service life.

  I would try that well.  Saving test or by downloading a video file, you know works, like this little Trick Microsoft OneDrive MP4 video in my OneDrive.  Save it to your computer and see if you can play it.  If so, you know that at least your Media Player is working.

• Primere Pro does not allow video clips?

  Whenever I put in a video clip in the timeline Pro Primer, it does work as audio file. This is meaningless because I shot my camera on them and they are on all .mov files and work very well on Quicktime.  However whenever you drag in the first clip, it will work and open the timeline, but for any other clip after that as you try to put in the time line he won't let not you put in the video section and only allow you to put it in the section audio why is this and how can I solve this problem?

  Are your patcher Source and target tilt pathway on and set correctly?

  

  MtD

• F4V not rendered video

  Hi all, I am trying to create a video background for a game using the FLVPlayback component. I need softness trasisition between several videos that I do a FLVPlayer for each of them so that I can just tween the alpha when I need to show it. When I start the game I all load and store the components of reading into a vector, I add them to the scene like this

  for (var i: int = m_Videos.length - 1; i > 0;--i)

  {

  addChildAt (m_Videos [i], 0);

  }

  Once the game is loaded if the video renderer dosnt first of all, so I see a background of thoough. But once I have the transition to a video that is top, top video renders.
  Any ideas on what could cause it to make?
  Thank you

  Try:

  for (var i: int = m_Videos.length - 1; i > = 0; i--)

  {

  addChildAt (m_Videos [i], 0);

  }

• Swf/html file downloaded will not play video when downloaded from the web

  I received an FLV file in InDesign (CS5). Then I need to export it as a SWF file and download on our Web site.

  When I export as SWF and test it on my desk, the video works fine, but when I download on my site (the file SWF, HTML file and the _Resources folder that was created when exporting), I can't get the html code (or the SWF version) to show the video.

  The initial poster shows but when I click it, it becomes white. When I mouse over I see controls I've specified through skins (the button "play", etc.) so I know it's there - but the bar which usually indicates in the video you're just has this green color thread through it.

  Please help - thanks!

  Could this be something to do with the configuration of your server "secure"? Can you download elsewhere, or try with the prefix https?

• After effects WARNING: the file < name > is not found

  After Effects CS5, Windows 7 64 bit, .jpg or .tif file formats

  Examples of files that import OK:

  D:\Do-not-backup\video\cathedral-junk_4-17-11\photos\coj_video_01.tif

  D:\Do-not-backup\video\cathedral-junk_4-17-11\photos\coj_video_06.jpg

  Example of a file that won't matter:

  D:\Do-not-backup\video\cathedral-junk_4-17-11\photos\coj_video_10.jpg

  Error:

  "After effects WARNING: the file D:\do-not-backup\video\cathedral-junk_4-17-11\photos\coj_video_7.jpg' cannot be found." This isn't typo. Could not import the file that he claims does not exist and is not the file I asked to import.

  Not much of a clue.

  There are chances that you are the ability to sequence selected in the import dialog box?

  Mylenium

• Video clip on several scenes

  I'm new to Flash and have begun to create a Flash document using several scenes. My document contains audio, so I decided to give users the option to show or hide the text of the narrative while playing the file. I use a clip in every scene which is triggered by a button that allows users to drag a box upwards or downwards to see the or hide the text of the narrative.
  
  This process works fine on a base with a scene, but the problem is that when loading a new scene, the story always begins be hidden because it is from the new scene with the new version of the clip for this particular scene. So if a user wants to view the narration throughout the film, they must click on the button at the beginning of each scene to display the text of the narrative.
  
  Is there a better way to handle such a situation, or can I use actionscript to the status of the clip in scene 1 and what to do to set the clip to scene 2 to the State?
  
  Video clips can be extended through several scenes?
  
  I'm really looking for any help I can get on this problem.
  
  Thank you
  
  Jay

  DCCDCU wrote:
  > I'm new to Flash and have begun to create a Flash document using multiple
  > scenes. My document contains audio, so I decided to give users the option
  > to show or hide the text of the narrative while playing the file. I use a clip
  > in each scene which is triggered by a button that allows users to drag a box
  > upwards or downwards to show or hide the text of the narrative.
  >
  > This process works very well on a base with a scene, but the problem is
  > that when loading a new scene, the story always begins to be hidden
  > because it starts with the new version of the clip of the new scene
  > This particular scene. So, if a user wants to view the narration throughout the the
  > film, they must click on the button at the beginning of each scene to show
  > the text of narration.
  >
  > Is there a better way to handle such a situation, or I can use

  Hello

  You can not run video clip through scenes.
  scene means the END of the timeline, clear all - new calendar.
  The narration in the charge level, level is added to the main sequence and can
  run through several scenes without interruption.
  It is pretty much independent.

  --
  Best regards

  Urami

  --

  
  If you want to send me a message - DO NOT LAUGH at MY ADDRESS
  

• Why Microseven Video Clip for Windows 8 should be run as an administrator

  Can not record video clips in Windows 8, the system alerts that "must be run as Administrator". I installed all the software supplied with the camera IP and mentioned in the statement, but may not always successfully save videos to Win 8 64 bytes system, can someone tell me what the problem is? Thanks in advance.

  Hi Luwen,

  Microseven M7RSS recoding on Windows Server software is only take Windows PC/server (Windows 7 and Server 2008 or later version) 2 to 5% CPU when it records 16 cameras IP Microseven. New video recording M7B15 and M7D12 HD cameras will require more hard drive space. Windows server 2008 or later version is installed on the big C: drive. Software M7RSS of record records the video content of the IP cameras on the C: drive. C: driver is installed OS as well, it is protected by the privilege of the user and administrators required. In this case, if you need to run the M7RSS software as an administrator to write the content of the video recordings on the C: drive. Otherwise, you can use a hard drive or drive partition hard different external drive instead of C: drive.

  For Windows 8, it runs as an administrator if the video content are recorded video on the C: drive. You can also view information about the compatibility of Windows 8. Information is available on the compatibility Windows 8 Centerfor M7RRS.

  Program compatibility is a mode in Windows that allows you to run programs written for earlier versions of Windows. Most programs written for Windows 7 also work in Windows 8, but some older programs might run poorly or not at all.

  If M7RSS is not compatible with Windows 8, you can try to install the same in compatibility modeand check if it works.

  If the problem persists, you can contact the device manufacturer for assistance.

• I enter a word in a files properties/summary (single) "Key words", but this word does not appear in the "Key words" column in the header files

  I have videos in a folder on a HARD drive. Headers (details) I have at the top of this file are the details contained in each file properties/summary (single). All the boxes after the details in the summary are white and I would like to fill them with information. everything I type in these boxes appear in the folder under the good except the 'Keywords' column header. The view that I use for the folder is "details", I'm using windows XP with the latest service pack. It does not matter as I type in numbers or in letters and it's the same with any type of file, with what I try this. How can I get the key words I type appears in the keywords column.

  Thank you

  Kerry

  Try running sfc scan: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  If this does not work, check if it happens in a new user account: http://support.microsoft.com/kb/279783

• Rendered audio files attached to incorrect video clips

  Work in Premiere Pro CC 2014.  I'm working on a project and noticed that some of my audio clips is more matching with correct video clips.  While I was working on this project, I was a little cleaning old files Premiere Elements provided and I think he must have 'cleaned' the files of my CC project also.  When I open the CC project I have seen several of the configured file (which is what I expected when I play them if their rendering folder had been deleted).  Unfortunately, some of my clips have the same name they came from different cameras and I not to rename when I import them.  So what happens is the clip camera 00033 2 recovers the audio clip camera 00033 1.  If I do a 'own media Cache Database' in the project will be that straighten everything.   (Most of the audio is OK, but everytime that I open it again the project another section breaks).  I have all my projects, media (PE and prepro) default file cache at the same location in AppData.

  Thus, I discovered how to realign the audio and video clips.  I've marked the issue as Offline clips, and then related their return.  Fortunately, only 7 of 161 files are out of sync.  My hypothesis is that the other project to clean up deleted files that belong to the current project.  Do the cleaning during the encoding process in Adobe Media Encoder was probably not a good idea.

• Video files (.mov) are not displayed "a plugin is required to view this content.

  Mac user. Video files (.mov) are not displayed "a plugin is required to view this content. This plug-in is needed and where can I find it?

  You can also see this MozillaZine forum thread.

  • http://forums.mozillazine.org/viewtopic.php?f=38 & t = 2642633

• Photo Gallery can't open the photo or the video because this file format is not supported or I have no updates to the photo gallery of what it means?

  Photo Gallery can't open the photo or the video because this file format is not supported or I have no updates to the photo gallery of what it means?

  Hi mariart

  Welcome to the Microsoft Answers Forum!

  ·         What format of picture or video file you are trying to open using the Windows Photo Gallery?

  Here is the link that will give you the description of the Windows Photo Gallery: Windows Photo Gallery: frequently asked questions

  Make sure that the Windows Photo Gallery is the default value. Steps to follow:

  i. Click Start, in the search box type in default of program

  II. Select set your default programs

  III. click the windows photo gallery, and then select set this program as default

  Link for reference: change that uses default Windows programs

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Photo Gallery "Photo Gallery can't open this photo or video. This file format is not supported or you do not have the photo gallery was last updated. »

  * Title *.
  Updated photo gallery

  On the Windows Photo Gallery, I get the following message: Photo Gallery can't open this photo or video.  This file format is not supported or you do not have the photo gallery was last updated.  I tried to download a site to print it and the download is finished, and then I got this message when I tried to open it.

  I'm having the same problem with a photo that is in a jpg format... I have no trouble to watch the other jpg files.  The only difference is that I bought this photo and he was sent as an attachment in an email, but the name of the file ends with .jpg, so I guess it's a jpg...

  ============================
  You can save the file .jpg on your desktop?

  If you can... try to open it in Windows Paint and re - save as a jpg.

  Windows Vista-
  Open Paint
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Paint John Inzer - MS - MVP - digital media experience

• I can hear a wav file, but could not get the video from my camera.

  original title: file WAV on Vista

  I can hear a wav file, but could not get the video from my camera.

  I have windows vista?

  Hello
  WAV files will be audio only.
  You can save this file as an MP4.
  B Eddie