Lenovo 3000 N200 - cannot access Rescue and Recovery - MBR poss problem?

Similar Questions

• Cannot install Rescue and Recovery on T410

  Hi, I recently bought a refurbished Lenovo T410 and have an enough technical knowledge, so I took the advice of another Member on the forum to do certain things to get myself set up. One of them was to create the factory recovery with Rescue and Recovery disks. As this is not already installed on the machine, I downloaded it (tvtvrnr4.52_005en.exe) but it will not install. I get the message "error 25014 there was an installation of the Rescue and Boot Manager Error Recovery. Return code: 6'. Any ideas on how to solve it another way or the creation of recovery disks?

  The only chance to perform the recovery of the plant is if you have Lenovo_Recovery partition with several on this .wim files. But it seems that they were absent. So, get in touch with the support of Lenovo in your country and buy recovery discs.

• Missing from the 40 GB hard drive! (R61) - Rescue and Recovery said there is no backups?

  I have a laptop R61 140 GB running on Windows Vista. It is around the age of 18 months.

  Explorer Windows says that 82 140 GB GB is used.

  When I add each folder I get only 45 GB of used space. All I really on this computer is music 26gig & some vacation photos.

  I had this problem since I first got the computer.

  I looked through discussions here that suggested that the backups can be the cause, and a program called Rescue and Recovery was the problem.

  However, when I opened this program it says that there are no backups available. However, this program is no doubt trying to run on my computer every Wednesday I get a popup saying my computer was turned off and I want to run it (I say no).

  Tools SW file is 2 GB.

  On the windows Explorer when I right-click I see there is something called 'points system recovery', there are many. However, I can't understand it here, where the data is stored, or how I would delete it.

  Please help me because it's very frustrating because I have about 40 GB of music I would like to pass through but right now that uses a lot of my remaining space.

  Download this and you can see everything on your hard drive http://www.pcworld.com/downloads/file/fid, 64425-page, 1-c, downloads/description.html

• N500 Vista and Lenovo rescue and recovery Care do not backup

  I would use Lenovo Care - Rescue and Recovery for backup system on DVD. But R & R cannot do, and I don't know why. What is happen? I see that no stop window with the message "a backup on your system is underway" but progress are always 0%. I made the backup several weeks - then backup was corectly. Unfortunately now I have a problem with her.

  my laptop is lenovo n500 and Vista 32

  I solved problem myself in new R & R 4.21 instalation

• How to reset the password of Lenovo Rescue and Recovery?

  Hi all!

  Here's my problem. Recently I discovered that I forgot my password for Lenovo Rescue and Recovery. I guess when I select the option "Protect your backups with a password", I could change my password for each new backup, whenever I remember my old password or not, but apparently not. So now I could not restore my previous backup and could not make a new one. Y at - it an option to reset the password?

  Thank you and sorry for my English

  Solved. Just uninstall the software, reboot, and install again. Now I can do a backup secure again.

• Cannot re - install Rescue and Recovery

  I have seen "backup" etc. in the menu of the Toolbox and uninstalled hastily - but actually I managed to uninstall Rescue and Recovery (recovery of blue button style). Now I can not reinstall it-"the installation was interrupted" - "your system has not changed." No idea why. Also cannot install SystemTap. Any ideas? Sorry I have no information better than this. The system works perfectly and all updates are installed. Just no notes R & r.: the works of blue button - it starts in a version of R & R. But if ever I need this facility, I can not trust to really work unless R & R gets reinstalled from the Windows side.

  OK found the answer. I was using the administrator account. I logged in as account owner, and the installation was successful. Thank you for my help, me!

• I did a rescue and recovery operation on my lenovo windows vista. I should not have done it, but it has been suggested. Now, I've lost some files including pictureswaone in February 2011. can I get it back?

  I did an operation rescue and recovery on my computer lenovo laptop windows vista now I lost files that have been added since February, 2011. photo for most. the rest were not important. I do not use my computer for business, just to download my pictures from the digital camera, games, connect to the who's who. and so on. is there a way to recover my files? I shouldn't have had to do a r and r, but it has been suggested by a "retarded"! now, I'm sorry, that I listened to. can someone help me?

  It of a longshot, but try this: http://www.filehippo.com/download_recuva/

• Error 25014 trying to install Lenovo Thinkvantage Rescue and Recovery! Help, please!

  Hello! Recently, I have restored my laptop with a general copy of Windows 7 pro 64-bit. I had to redo all the drivers and software (of course). I had installed Rescue and Recovery before but never used. I tried to reinstall it today and he throws back each time with the same error message (error code 25014 = 6)! I had installed linux but deleted and installed Windows again. I also have a 21 not used same GB partition (I have no idea how to combine). Any advice on how to work will appreciate it! Thanks for your help in advance!

  RC 25014 = 6 error is error install boot RNR Manager.

  Provide information:

  (1) your machine ship of Lenovo, with Lenovo factory system? If Yes, what operating system has been installed? Vista, windows 7 home, pro etc? This would install with 3 partitions: system_drv, Lenovo recovery, (C).

  (2) you say: I recently restored my laptop with a general copy of Windows 7 pro 64-bit

  Not that this means that you do not have a Lenovo factory restore, but actually installed a commercial version of win7 pro?

  I'll assume win7 pro retail for now.

  (3) you say: I had installed Rescue and Recovery before but never used.

  It was in the past, lets say on a shipped factory system Lenovo?

  (4) you declare: had installed linux but deleted and installed Windows again. I also have a not used 21 same GB partition

  ===

  It seems to me, your HARD drive had a top system.  I see Ubuntu mentioned in your other posts. Your HARD drive had several parttions, including the 21 GB partition. Then, you have decided to install a retail version of windows 7 pro.

  During a sale at retail of windows installation, you must pay attention as to where it will install.

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Note steps 7 and 8.

  It seems that you did the windows installation disk HARD existing, with the pre-existing partitions.

  ===

  RC = 6

  The simple answer is THAT NRR is already installed.  Did you uninstall RNR before installation?

  The answer is complex:

  During the installation of RBR went to add its boot manager entries, BCD (startup control data), he did NOT like the content of the BCD, IE other entries parked in the BCD, ie, Linux. He expects to have 2 slots used in BCD, windows, and windows RE.

  ===

  Reflect this. See if it fits your situation.

  ==

  I would erase the HARD disk via a standalone utility, then install win 7 pro retail and all issues should dissipate.

  This erase/delete can be done during the installation of windows.  refer to steps 7 and 8 above.

• Lenovo 3000 N200 on the habit of power and shows no lights

  Hi all

  I have a Lenovo 3000 N200 laptop. One day he just off its autonomy while watching a video, and now shows no signs of life. Used to power on, no light when it is connected with a power supply, nothing.

  I tested the power supply and tried another new and get the same result. So I don't think that the battery/power supply is the issue.

  I have a feeling that it is something more serious, the laptop is out of warranty and IBMs fresh out of warranty are stupidly high. If anyone knows what could cause this problem and if it is possible to repair with a spare room (off ebay or elsewhere), I'm able to disassemble the laptop and replace a part.

  Thanks for any advice.

  Bass sounds.

  Some say remove memory and see if it gives an indication

  of life, like any beeps at startup.

  Try without battery, try to unplug it, remove the battery and press and hold the

  power button for 30 seconds and plug in again etc.

  Try to remove the hard drive, but this looks like a dead motherboard

  If you have any sign of life after trying everything you can think of.

• Rescue and recovery cannot delete backups

  Hello

  I have problem delete old backups with Rescue and Recovery - always when I try to delete them, it seems to work, but it is not, it never ends... I tried to remove one of all backups, only the last or only the oldest or all of them together, but without effect. I have 6 backups about 45 GB together. And by the way that r & R does not well at all - also when I click on optimize backup storage space, it does not work...

  Eventually, it is normal that when deleting old backups, computer seems cold and it takes a long time, but I don't know if it never ends.

  I have the latest version of Windows XP Pro SP3, R & R 4.21.0016 R61.

  Is there a solution?

  Thank you very much!

  V.K.

  Uninstall rescue and recovery of add/remove programs. It will remove the backups in this way.

• Computer laptop Lenovo 3000 N200 that does not start as a system file is missing or damaged:

  «I have a laptop Lenovo 3000 N200 that won't start as "" Windows has no start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM "»»

  Rescue and Recovery Tools will allow me to restore the hard drive to factory settings, but I prefer to back up important data first. Rescue and recovery apparently allow backup and pays the appropriate folder / structure of files, but the "Start" option is grayed out.

  Then I tried to boot from Windows XP CD but it signals that it has no hard drive, although Rescue and Recovery can apparently go to folder/file structure.

  How can I move it please?

  Thank you very much - Simonides

  all sorted out now... see http://forums.lenovo.com/t5/Lenovo-3000-and-Value-line/Lenovo-3000-N200-can-t-access-Rescue-and-Reco...

• Rescue and recovery will not restore backup files it finds when starting

  I recently had a system problem on my Lenovo computer and had to recreate the image. When I try to restore my backup using rescue and recovery (R & R), they prove inaccessible. How to access these backups?

  Details of the options selected in R & R are attached, as an image on the screen of the settings dialog box.

  Running R & R, backups (on an external HDD USB) are visible and can be selected as expected. When the computer restarts in the space of restoration work, after a warning do not turn off the power, you get the error message "the restore has failed because the backup was not found at the specified location. Accept that the computer restarts in Windows. In this case regardless of the options selected at the start of R & R.  Where appropriate I select the USB external storage device in the Setup program and select a backup of those listed.

  I also tried updating all Lenovo utilities, including R & R. The option 'get new updates"errors when downloading the package information Lenovo Service Center (1 on 1) at the helm of the 30% with the error" Exception should not met!

  

  A lot of ongoing issues.  Many Lenovo post deal with each issue. Intel, system update, create a recovery to the USB media.

  For now, I'll address your problems of rescue and recovery. It seems that your system worked well, until a database had records in doubles in it, and you want to use RI to restore a backup on your USB.

  Then you have attempted a return to the factory, which show a lot of questions.

  If I understand your request, you want to restore your system to some time in the past, using a backup RNR. Either last week or 2 months ago. Something that works.

  ===

  RNR will save all partitions on the disk C DD.  It never saves another HARD disk.  2 readers warning has been around for a while. If C and D are on the C drive, HARD drive, it will run through RNR.

  Single file restore only runs on the windows RNR.  But there is no need to restart standalone RNR (pf11 during startup).

  It is ok. At least the RNR version on windows can find and restore your USB /rrbackups, of 5 min or 30 hours. This works.

  ==

  Factory restore installs a RNR version right here. This version probably does not match the version on your USB. If you started the RNR factory with the USB version version, you might expect not found messages.

  ===

  On your system windows today, please state the version installed.  Start using pf11 and indicate the version installed.

  You cannot create recovery media and rescue on the same device. Your luck if anything boots on the USB (other positions).

  Essentially, the RNR standaone version must match the /rrbackups on USB.

  =

  How do restore you to the factory settings? pf11 through the work of rnr or external cd/dvd?

  You are the original owner of the machine?

• Lenovo 3000 N200 0769 keyboard problem

  I have a strange problem with the keyboard on a newly acquired Lenovo 3000 N200 0769.

  The laptop came from the work, it had been messed up trying to remove Vista and it would not boot from the CD or enter the BIOS, it was stuck just trying to run Rescue and Recovery more and more without a partition of work service.

  I managed to get Windows7 installed on the machine and it works great except for a number of things.  The touchpad does not work (not recognized by the system).  I suspect the material in this case, so I have a forthcoming replacement touchpad.

  The biggest problem is the keyboard.  It does not at all when the machine starts.  This means that I can't get into the BIOS, and I can't "any key" to boot from a CD.  As soon as Windows (or Ubuntu, I used to help recover the machine) load the keyboard driver, the keyboard to life and it works perfectly (I'm typing this message on the keyboard)

  Because the keyboard works perfectly when the drivers are installed, I am inclined to think that the keyboard material is OK.  With Windows installed, I have updated the BIOS to the latest version, no change to the problem.    I tried using a USB keyboard (before flashing the BIOS), but it does not either until the operating system loads.  I also tried to reset the BIOS using the contact in the hard drive compartment.  This causes the BIOS to complain and offer F1 or F2, but the keyboard does not work, so I still can't get.  I reinstalled the keyboard and the touchpad connector on the motherboard.

  Any ideas?  I would like to replace the keyboard if I did fix it (or I ran out of options!), but I bet that someone else ran into the front.  I tried Lenovo ringtone for support, but when they found it was out of warranty, they said "I'm not allowed to talk to you."

  See you soon

  John

  You have the problem solved.

  I was doubtful touchpad.  AMD got one off of eBay just finished install 10 minutes ago.  The keyboard works properly as soon as the machine starts and the touchpad is recognized and working properly as well.

  See you soon

  John

• IBM ThinkPad T43: Rescue and Recovery question

  Hello

  I have an IBM ThinkPad T43. The Rescue and Recovery program opens whenever I turn on my laptop after a failed attempt to restore my laptop to factory settings. I cannot even connect on Windows, because the Rescue and Recovery program opens upwards immediately after I turned on the power. I tried to restore my system to factory settings using the program and the product recovery disc I bought at Lenovo, in the hope of resolving the issue, but every time I'm prompt "IBM could not restore your system.

  How can I stop Rescue and Recovery of the opening and resume with normal startup in Windows? What should I do so that I am able to restore my laptop to factory settings?

  Please help if you have any suggestions. I appreciate it greatly! Thank you!

  You can use this TI pc doc disk bootable http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-56222 its been a long time since I used it, but I think that in the top right there is a tab that says utilities or something like that you can wipe the HARD drive from there as I've always used the quick option worked for me

• Rescue and Recovery backup not file system - without error message

  I use, since 1985 the first IBM, Lenovo then. I was very happy, my next Lenovo will be bought next spring.

  But I'm just very disappointed. Daily tracks of rescue and recovery on the local disk, which later are copied to a backup drive.

  The program has never shown an error on the screen and still run perfectly-, I thought!

  A few days ago, I got a Windows error for the first time. There are a lot of missing files.
  I restored the system on the R & R and reboted. But cannot start.
  With a boot disk, I booted the system and could now see that all the Windows directory was empty!

  Unfortunately, I can not in R & R files see what files and directories contain a backup? Or can you?

  Question 1:

  So I would like to know how if someone can enlighten me.

  Then I started to investigate on what had happened. In c:-Library SWSHARE I found some files that I see is connected to R & R.
  In the engine.log file, I see R & R has written a large number of error lines, of which a part is reproduced below. File dates to 2011 and there are errors all the way

  Question 2:
  Why the program not onscreen when R & R run display errors, so that the user knows there are errors?

  Now I'm sitting at the bottom with a long nose, after 2 days and nights, trying to find a solution and restored the system several times and do not know how the file system works will come back on my PC so normally again.

  Be more happy if someone can tell me how to solve this problem.

  Here is a selection of error lines:

  Thu 17 Oct 08:41:59 ENGINE 2013: failed to send an IOCTL_FFDRIVER_ENCRYPT_OFF
  Thu 17 Oct 08:43:38 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
  Thu 17 Oct 08:43:40 engine 2013: CopySAM called with pwszDestination = "C:\RRbackups\common".
  Thu Oct 17 08:43:44 engine 2013: out of CopySAM with dwRet = 0 x 00000000
  Thu 17 Oct 17:00:09 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
  Thu 17 Oct 17:00:09 engine 2013: DeleteSISAndExclude (delType 1, drive letter C, Destination 'C:\RRbackups', level 12)
  Thu Oct 17 17:01:25 engine 2013: DeleteSISAndExclude out with return code 0 x 00000000
  Thu Oct 17 17:01:59 2013 engine: br_funcs.exe - version is '04.17.20a.00 '.
  Thu Oct 17 17:01:59 2013 Verbatim: WriteDriveContents (DriveLetter ='C:', Dest = 'C:\RRbackups', level = 13, SleepCount = 0, DeviceType = 1, dwOptFlags = 0 x 00000001)
  Thu Oct 17 17:05:48 2013 Verbatim: 0x00000010883e6399 - space required before compression
  Thu Oct 17 17:05:49 2013 Verbatim: 0x00000001ef30e1bf - estimated space required after compression
  Thu Oct 17 17:05:49 2013 Verbatim: 0x0000001dae2dd000 - currently available disk space
  Thu 17 Oct 17:07:27 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\cookies.sqlite-shm' - WinRC = 0x00000000
  Thu 17 Oct 17:07:30 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\healthreport.sqlite-shm' - WinRC = 0x00000000
  Thu 17 Oct 17:07:31 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\parent.lock" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu 17 Oct 17:07:33 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\places.sqlite-shm' - WinRC = 0x00000000
  Thu 17 Oct 17:07:34 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\webappsstore.sqlite-shm' - WinRC = 0x00000000
  Thu Oct 17 17:08:28 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Windows\UsrClass.dat" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:08:30 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:02 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\NTUSER." DAT' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:09 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\ntuser.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:15 engine 2013: CreateFileW failed for the file 'C:\Documents and Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG LocalService' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:16 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\LocalService\NTUSER. DAT' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:17 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\LocalService\ntuser.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:18 engine 2013: CreateFileW failed for the file 'C:\Documents and Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG Settings' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:19 engine 2013: CreateFileW failed for the file ' C:\Documents and NetworkService NTUSER. DAT' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:20 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\NetworkService\ntuser.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:25 Verbatim 2013: cannot save short name of "C:\hiberfil.sys" - WinRC = 0x00000020
  Thu Oct 17 17:09:25 engine 2013: impossible to attributes of record for the file "C:\hiberfil.sys" - WinRC = 0x00000020
  Thu Oct 17 17:09:47 2013 Verbatim: cannot save short name of "C:\pagefile.sys" - WinRC = 0x00000020
  Thu Oct 17 17:09:47 engine 2013: impossible to attributes of record for the file "C:\pagefile.sys" - WinRC = 0x00000020
  Thu Oct 17 17:11:50 engine 2013: CreateFileW failed for the file "C:\Program Files\Bitdefender\Bitdefender\onaccess.dat" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:19:49 motor 2013: jump from the C:\Program Files\Bitdefender\Bitdefender\onaccess.dat file at the request of the user
  Thu Oct 17 17:23:10 engine 2013: CreateFileW failed for file ' C:\Program Files\Common Files\Bitdefender\Bitdefender threatens Scanner\smartdb - ntfs.db' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:33:13 engine 2013: jump to the folder C:\Program Files\Common Files\Bitdefender\Bitdefender threat Scanner\smartdb - ntfs.db at the request of the user
  Thu Oct 17 17:37:08 2013 engine: BackupFile failed - unable to "C:\WINDOWS" BackupRead - GetLastError() returns 0x00000020
  Thu Oct 17 17:37:08 2013 engine: unable to BackupFile directory C:\WINDOWS - dwRet = 0 x 00000516
  Thu Oct 17 17:37:09 2013 Verbatim: can't get exclusive lock for the entire file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Outlook\outlook.pst" - WinRC = 0x00000000
  Thu Oct 17 17:37:13 2013 Verbatim: can't get exclusive lock for the whole of the file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Outlook\Personal folders (1) .pst '-WinRC = 0 x 00000000"
  Thu Oct 17 17:37:15 2013 Verbatim: can't get exclusive lock for the entire file "C:\Privat\bendtskov-hotmail Arkiv.pst" - WinRC = 0x00000000
  Thu Oct 17 17:37:16 Verbatim 2013: can't get exclusive lock for the entire file "C:\Privat\morkebjerg-hotmail Arkiv.pst" - WinRC = 0x00000000
  Thu Oct 17 17:37:17 2013 Verbatim: WriteDriveContents exit with return code 0 x 00000000
  Thu Oct 17 17:37:25 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
  Thu Oct 17 17:37:25 engine 2013: CopySAM called with pwszDestination = "C:\RRbackups\common".
  Thu Oct 17 17:37:26 engine 2013: out of CopySAM with dwRet = 0 x 00000000
  Thu Oct 17 22:34:38 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
  Thu Oct 17 22:34:39 engine 2013: CopySAM called with pwszDestination = "C:\RRbackups\common".
  Thu Oct 17 22:34:42 engine 2013: out of CopySAM with dwRet = 0 x 00000000