Rescue and Recovery backup not file system - without error message

Similar Questions

• Rescue and recovery will not restore backup files it finds when starting

  I recently had a system problem on my Lenovo computer and had to recreate the image. When I try to restore my backup using rescue and recovery (R & R), they prove inaccessible. How to access these backups?

  Details of the options selected in R & R are attached, as an image on the screen of the settings dialog box.

  Running R & R, backups (on an external HDD USB) are visible and can be selected as expected. When the computer restarts in the space of restoration work, after a warning do not turn off the power, you get the error message "the restore has failed because the backup was not found at the specified location. Accept that the computer restarts in Windows. In this case regardless of the options selected at the start of R & R.  Where appropriate I select the USB external storage device in the Setup program and select a backup of those listed.

  I also tried updating all Lenovo utilities, including R & R. The option 'get new updates"errors when downloading the package information Lenovo Service Center (1 on 1) at the helm of the 30% with the error" Exception should not met!

  

  A lot of ongoing issues.  Many Lenovo post deal with each issue. Intel, system update, create a recovery to the USB media.

  For now, I'll address your problems of rescue and recovery. It seems that your system worked well, until a database had records in doubles in it, and you want to use RI to restore a backup on your USB.

  Then you have attempted a return to the factory, which show a lot of questions.

  If I understand your request, you want to restore your system to some time in the past, using a backup RNR. Either last week or 2 months ago. Something that works.

  ===

  RNR will save all partitions on the disk C DD.  It never saves another HARD disk.  2 readers warning has been around for a while. If C and D are on the C drive, HARD drive, it will run through RNR.

  Single file restore only runs on the windows RNR.  But there is no need to restart standalone RNR (pf11 during startup).

  It is ok. At least the RNR version on windows can find and restore your USB /rrbackups, of 5 min or 30 hours. This works.

  ==

  Factory restore installs a RNR version right here. This version probably does not match the version on your USB. If you started the RNR factory with the USB version version, you might expect not found messages.

  ===

  On your system windows today, please state the version installed.  Start using pf11 and indicate the version installed.

  You cannot create recovery media and rescue on the same device. Your luck if anything boots on the USB (other positions).

  Essentially, the RNR standaone version must match the /rrbackups on USB.

  =

  How do restore you to the factory settings? pf11 through the work of rnr or external cd/dvd?

  You are the original owner of the machine?

• Help and Support does not all links - _ error message

  	The page cannot be displayed
  	Cannot display the page you are trying to view. Maybe it's because: If you try to view this content on the network, there may be network congestion or a problem with your connection. There could be an error in the address of the page. The page may not be available. Please check your network connection or try another page. I tried all the "fixes" mostly, nothing helps.

  Hi marthal222,

  Do you have any service pack installed on the computer?

  Please see the article below for reference.

  "Network connections" in Windows XP Help and Support displays a "Cannot display page" error message
  http://support.Microsoft.com/kb/314330

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Rescue and recovery and windows 8.1

  Hello

  For the last 4 years, I used Rescue and Recovery on the my ThinkPad to keep backups (really liked the functionality of incremental backup) and restore unique when files necessary.

  I have now just received a new X 1 carbon gen3 coming with default Windows 8.1 and a lot of the classic ThinkVantage tools are missing. I've heard many of these tools no longer exist or are replaced by "apps".

  But what of Rescue and Recovery? Impossible to find anywhere for Windows 8.1 and it is really a great tool.

  Any idea? I just missed the link somewhere? It's official, and it tools is not taken in charge (and will never) on Windows 8.1? No work around? (such as installation of Windows 7 and cross my fingers?)

  Thanks for your comments on that (I'm already hating Windows 8.1, fortunately Windows 10 will be better...)

  Rescue and Recovery is not supported on 8 win 8.1 you can try using windows backup.

• Delete backup files Rescue and Recovery after the uninstallation of r ' not R

  During the upgrade to Windows 10, Rescue and Recovery has been automatically uninstalled.  I had neglected to remove the external drive backup files before that.  I would like to locate these files so I can delete them manually.  What files are backups Rescue and Recovery?

  Y at - it a compatible version of Windows 10 Rescue and Recovery?

  I leave your external USB - HDD intact right now.

  You might like to win 10, win10 could not meet your needs and turn.

  A Loved via RNR win7 would be nice to have, just in case.

  If it comes to the test computer, your decision.

• Rescue and recovery of backup fails: current drive does not match the previous backup

  I have just rebuild my T60p with a new hard drive for the recovery of Lenovo CD via the rescue and recovery CD. Once the system restore is complete and the laptop running, I took a full backup using Rescue and Recovery. This backup is the C:\ drive which was the only drive I had and was on a USB hard drive.

  In recent days I have the C:\ split in two, giving me a new D: drive, patched all system software, added my own data, and obtained the machine configuration as I want. I've also trashed the R & R hidden partition so I could make a bigger drive D:\ and created my own bootable CD R & R for future use - not that it makes a difference.

  Now, I want to take a second backup with the Rescue and Recovery tool. Naturally I want to back up the disks C:\ and D:\, but the backup fails saying: -.

  "The last backup of this system include the following drive letters: C: .

  Your system is now back up these drive letters: C: d:

  Please define drive letters, as they were before and Christine backup. You may need to exclude partitions created since the last backup. »

  Is there anyway that I can make a backup of disks C:\ so my D:\?

  The only option I see is to delete my previuos backup and I don't want to do because it can be useful in the future if I still want to restore my system to original state manufactured.

  Suggestions anyone?

  Thanks, Iain

  Given that you have saved on an external USB disk your backup will be saved in a

  the folder named RRbackups.  If you rename this file I - think - R & R going to think

  you do not have any backups, so the next backup will be a 'base '. If you

  never have to restore the original of your 'base' backup, rename the folders should allow.

• I did a rescue and recovery operation on my lenovo windows vista. I should not have done it, but it has been suggested. Now, I've lost some files including pictureswaone in February 2011. can I get it back?

  I did an operation rescue and recovery on my computer lenovo laptop windows vista now I lost files that have been added since February, 2011. photo for most. the rest were not important. I do not use my computer for business, just to download my pictures from the digital camera, games, connect to the who's who. and so on. is there a way to recover my files? I shouldn't have had to do a r and r, but it has been suggested by a "retarded"! now, I'm sorry, that I listened to. can someone help me?

  It of a longshot, but try this: http://www.filehippo.com/download_recuva/

• N500 Vista and Lenovo rescue and recovery Care do not backup

  I would use Lenovo Care - Rescue and Recovery for backup system on DVD. But R & R cannot do, and I don't know why. What is happen? I see that no stop window with the message "a backup on your system is underway" but progress are always 0%. I made the backup several weeks - then backup was corectly. Unfortunately now I have a problem with her.

  my laptop is lenovo n500 and Vista 32

  I solved problem myself in new R & R 4.21 instalation

• With the help of Rescue and Recovery to make backups of 3 different machines

  Hello, I have three laptop Thinkpad T400, X 61 and R61i. I want to back up by using an external hard drive. The HD is divided into three partitions, the smallest of X 61, the middle of R61i and most importantly - for T400. I backed up all my laptops in the appropriate partitions (base backups), but now, so I want to make partial backups, they go to the bigger partition (for the T400). Is it possible (and how) do R & R to always use the same partition for each laptop while safeguarding it?

  A few notes, to respond to your previous post:

  (1) Sysprep is used by administrators to deploy and image system to other machines. Basically, the system starts standalone RNR and save the image (drive C and the same HARD drive partitions) on the service partition.  Comment enumeration pleasure has to with additional partitions on the C drive HDD.  For sysprep to work, additional partitions must be of type Extended. The windows PE, is a windows "skimpy" PRE environment. For win7, the EP is based on Vista with a small set of win7 features added.  Thie PE is used for developers (as Lenovo) to install their systems.

  * None of this applies to a user at home like you and me *.

  (2) the logic used in the RNR for the GUI vs bent the advanced GUI are DIFFERENT.

  Example: the user has part C, D and E on C disk HARD drive.  Uses advanced parms to set backup (local) to go to E drive.

  If the backup through the advanced graphical interface, drive E is honored.

  If the backup is performed through simple GUI, the partition with the largest free space is used.

  Note: using the Second HARD drive don't offer NO choice to designate a partition target of \RRbackups.

  (3) view of backups.  It's clearly too.

  When a backup is performed, and RNR is locked on him, it will REFRESH the registry entries for the content of backup.dats in the \rrbackups folder. Subsequent backups of view will probably be read from the registry. That is to say no record of reloading. Simpified mistletoe might once again, just to use the registry, the locks of GUI in the new backup folder.

  (4) your letter removal/restoration

  a: I have no idea how autonomous RNR will react to the 3 folders on the second \rrbackup, IE the part 1, 2, 3.

  b. If rnr backups locked in the wrong \rrbackup folder, you will have a total mess. A symptom of this: you take a basic (full) backup, and the next backup, which should be an incremental, is actually another full backup.  This error could occur if you deleted the wrong letters.

  (5) you have a mess.

  If I save it again this PC, R & R is a point instead of a differential backup<>

  It would take a lot of work on you end to look in the backup files.  Not worth it.

  Again, the simpifed GUI backup use different logic. He likes the larger partition.

  From what you say, you used simplified and got the base of the machine backup 3 all go good part 1, 2, 3.

  Somewhere in this mess, he locked in a \rrbackups without a base backup folder and took another backup.

  who knows.

  ==

  Release notes:

  Review 4
  ----------------
  Location of backup changes when you select a smaller partition through the advanced interface of the Rescue and Recovery program.

  In the advanced interface of the Rescue and Recovery program, you select a partition more small capacity on your local hard drive as the backup location. Then, you switch to the simplified interface to create the backup. However, the backup is created on the partition with the highest capacity.

  To resolve this problem, back up your system in the advanced interface of the Rescue and Recovery program after you have selected the backup location.

  ===

  The solution is the cleanest way to follow. I would always use the GUI advanced for now on.

• Rescue and recovery blocks for hours at 0% of backup

  Hello

  My R61 ran quite OK, but slower over time. I got through rescue and recovery made a backup of the entire system on an external hard drive. (I had come back to XP and recently did a total system backup on the external HD). So I haven't started the rescue and recovery, thinking that he should simply reinstall it previously saved system. Alas at step 2 the progress of rescue and recovery, the new generation of the system stopped. Black screen with the message: «backup system is...» 0 % ». Here I wait for hours. Nothing progesses.

  What should I do? Island of 'progress' is already happening for 6 hours! (I see that my external HD flashes from time to time, but the computer does not seem to do anything).

  What should I do? I fear that if I press the power button to restart the computer, I will plant it completely.

  Please help me!

  Thanks in advance

  Roger

  Rescue and recovery hung several times for hours. Yet, it seemed to work after 20 hours. Puhhhh...

  Lenovo at: Your UI during the rescue and recovery process is ineffective. He left me without any feedback for hours. Almost, I rebooted the computer during critical backups. Here you certainly should help the user to understand what to do and what not. How can I find out, it's OK to have a bar saying 0% progress made for 8 hours.

  Even now, I don't know what to do. The computer restarts, windows is OK. But now I can turn off the computer or is always something during rescue and recovery. The last time, he says, it is step 2 on a total of 5 steps. Is it still now something in the back? The rescue is complete? Where is the message telling me, he did the job.

  All users: be patient, do not hit anything it either by running a rescue and recovery.

  Lenovo: By the way, I had - after installing my computer with xp - makes a backup of the system. that I repeated it several times. When my HD arrived full, I remove some of the older versions, because anyway, I had the newer versions which worked perfectly. Alas, I didn't, which obviously rescue and recovery done a system save, later versions are simply updated. By removing the first version, I lost all the! So, I ended up having no actual backup of a validating at the beginning.  In short: Rescue and Recovery can be a tool very well for an IT expert. For the average user, there are much too many traps. Lenovo: Try to it you like-centered-design user instead of the user Board Chinese garbage, if in the future, you want to keep as «almost IBM» brand name For me, Lenovo - in this regard - is more "almost Chinese It-garbage".

• Rescue and recovery lists no backup on USB Iomega eGO drive

  Hello

  I have been using an Iomega eGO external backups USB drive.

  I was able to identify and remove (if necessary) backups in Windows 7 and rescue & recovery running, but I can't get the list of backups at the start of a recovery in rescue & recovery DVD.

  Basically I replaces unencrypted with a SSD hard drive that supports encryption.

  The goal was to use a full backup immediately before removing the HARD drive to restore the complete system.

  At the start of the recovery DVDs, recovery utility & rescue lists not all backups, even when the check box for the list of backups on other systems is checked.

  It makes no difference if the selection of THE places or USB external drive.

  Any ideas?

  Backups are not much good if you can't get back them.

  If my old drive did not then I would be in a worse state than this. I can't say I'm impressed.

  Well, I've finally sorted this issue.

  I tried to create a new recovery disk.

  I even tried the recovery time in Windows and see what backups it detected. Yet once, I drew a blank.

  The question was this:

  On my W510 at least, none of the USB3.0 ports are recognized by Lenovo rescue and recovery software when you select the USB storage device. Once connected to a single USB 2.0 port the USB eGo has been recognized and listed backups.

  Unfortunately, this means a minimum of 6 hours to restore from a full backup!

• Missing from the 40 GB hard drive! (R61) - Rescue and Recovery said there is no backups?

  I have a laptop R61 140 GB running on Windows Vista. It is around the age of 18 months.

  Explorer Windows says that 82 140 GB GB is used.

  When I add each folder I get only 45 GB of used space. All I really on this computer is music 26gig & some vacation photos.

  I had this problem since I first got the computer.

  I looked through discussions here that suggested that the backups can be the cause, and a program called Rescue and Recovery was the problem.

  However, when I opened this program it says that there are no backups available. However, this program is no doubt trying to run on my computer every Wednesday I get a popup saying my computer was turned off and I want to run it (I say no).

  Tools SW file is 2 GB.

  On the windows Explorer when I right-click I see there is something called 'points system recovery', there are many. However, I can't understand it here, where the data is stored, or how I would delete it.

  Please help me because it's very frustrating because I have about 40 GB of music I would like to pass through but right now that uses a lot of my remaining space.

  Download this and you can see everything on your hard drive http://www.pcworld.com/downloads/file/fid, 64425-page, 1-c, downloads/description.html

• Rescue and Recovery 4.21.00.16.00 have not installed

  I just use System Update to download and install Rescue and Recovery 4.21.00.16.00.

  He told me that she has not installed, but gave no reason and there is no error message.

  I tried again and SU acknowledges that it has been already downloaded, but the result was the

  even.

  Does this mean I'm stuck with 4.20.0511.00?

  I looked in my event viewer and has got a hint. Besides, knowing that my anti-virus program,

  BitDefender, willing of a feature which prevents the change to the registry without the permission of

  me and I had not asked for these, I decided to disable this feature, and then try again.

  It worked and I now have the latest version of rescue and recovery installed.

• Rescue and recovery cannot delete backups

  Hello

  I have problem delete old backups with Rescue and Recovery - always when I try to delete them, it seems to work, but it is not, it never ends... I tried to remove one of all backups, only the last or only the oldest or all of them together, but without effect. I have 6 backups about 45 GB together. And by the way that r & R does not well at all - also when I click on optimize backup storage space, it does not work...

  Eventually, it is normal that when deleting old backups, computer seems cold and it takes a long time, but I don't know if it never ends.

  I have the latest version of Windows XP Pro SP3, R & R 4.21.0016 R61.

  Is there a solution?

  Thank you very much!

  V.K.

  Uninstall rescue and recovery of add/remove programs. It will remove the backups in this way.

• Rescue and recovery work do not

  I erased from my hard drive and installed Ubuntu. Now I need Vista to use some software to test for my state bar examination. Rescue and recovery disks as well as keep the f11 system restore gives me an error of starting. Vista is gone for good? Lenovo wants to charge me $45 to send discs that will work. Can get an a .iso for this version (Vista Business SP1 64, I think) somewhere and use my activation key product on the lower part of the PC? I don't have time to search the forums and I'm not an expert. Help, please.

  http://www.mydigitallife.info/2009/04/29/Windows-Vista-with-SP2-RTM-slipstreamedintegrated-DVD-ISO-i...

  something here should work for you.