Lenovo box headphones does not

Similar Questions

• My labtop sound works, but when connect the headphones does not work

  My labtop sound works, but when connect the headphones does not work. Note that the headset before 1 HR was working.

  Hello

  ·         Are these USB headset or headphone jack analog standard?

  ·         What version of the operating system is installed on the system?

  If you continue Windows 7 or Windows Vista refer to the procedure in method provided below and check if they help to resolve the issue.

  Method 1:

  Step 1:

  You can check if the headphones are activated as a playback device. To do this, see the following steps:

  (a) the Pearl-click Start and type Sound in the start search box.

  (b) in the Start Menu Options, select change adapter settings .

  (c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

  (d) select headphones and select

  Step 2:

  Also try to put headphones of default device and check, follow the steps below.

  (a) go to Start and click on Panel.

  (b) click Sound, and then a new window will open.

  (c) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  (d) now check if headphone is listed there and right-click on it and choose activate.

  (e) highlight this helmet and click on "as default'.»»

• Lenovo ideapad sound does not

  Lenovo ideapad sound does not work as sound card and verified drivers working properly, earlier that I had uninstalled applications unwanted with revo uninstaller and removed from the list of left over files Scan of revo uninstaller please give any suggesion.

  Hello

  Method 1:

  You can run the fix - it from the following link.

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2:
  You may need to rebuild the database of Windows Media Player.
  Here's how:
  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  Method 3:
  Uninstalling and reinstalling Windows Media Player:
  Step 1:
  Uninstalling Windows Media Player:
  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer
  
  Step 2:
  Reinstall Windows Media Player
  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of the Windows Media Player.
  d. restart the computer.

  For more information check out the following link.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I hope this helps.

• In front of the speakers and the headphones does not. Help?

  My front speakers and the headphones does not. Audio only, I can hear comes from the little pregnant on the bottom of my laptop near the Center. I think it is a driver problem. Please let me know how I can fix it.

  Hello

  Thank you for your response.

  Click on the link below to download and install the audio drivers for your Dell computer. Select the concerned operating system before downloading the driver,

  http://Dell.to/U2ABjf

  You can also try the Microsoft Fix - it for the problems related to the sound running from the link below.

  http://bit.LY/c3mM46

  I would like to know if additional assistance is needed.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• I try to install my new photoshop 11 and try the no box serial does not grace!

  I am trying to install my new photoshop elements 11 better buy and try the box serial does not work. Help please!

  Serial number FAQ recovery process. Point-of-sale activation products

  Mylenium

• P1 of Lenovo Vibe (3G does not work, to the connection but very very slow)

  No idea how her figure-out and resolve the cause first Lenovo Vibe P1 3G connection failure / slow connection problem?

  I have 3G plan but not able to use it. WiFi works well, but 3G does not work after update to Marshalmallow.

  I found solutions to the question:
  -If you have problems with network i.e., 3 G/Wi-fi you just need to reset the network settings to (settings > Backup & reset > reset network settings)
  -If you have any problem with other things you have to factory reset your phone after the upgrade Marshalmallow.

• My right headphone does not work, but the left works fine

  right earpiece does not work

  Try again with a different pair of headphones. If they don't work, maybe your headphones are broken.

• Lenovo laptop z500 does not

  Hello

  I started having a problem with my computer laptop z500 and here's how it went past. First I updated my laptop to Windows 8 to 8.1, and then after the update has been finalizied that I closed my laptop, then the next day I woke up and tried to use my laptop it used to open but the screen was completely empty. I can hear the fans moving and the laptop was on but he had no cursor and the screen seems off. I read that you had to connect to a computer and manually change settings online, my computer was not working that day here, so I decided to leave it up to the later and use this laptop as an alternative. 3 weeks ago, and when I tried to open it it did not at all. No fans running, no blinking, nothing, dead. I tried to load it it still does not work, I left it overnight to charge still nothing. I opened the laptop removed my battery and don't put again after 1 minute still no difference. I literally removed my battery 3 times and tried everything I can to fix the laptop but it is not yet supported. I think it might be because I have not installed the firmware Manager or battery for Lenovo when updating to 8.1, but I'm not sure.

  Please help me to open my laptop I have a lot of work that cannot be thrown.

  Thank you!

  Moe6 wrote:

  I don't know what is the OneKey but I can't not open all my laptop even if I hold the power for 30 seconds button, load, remove and replace the battery and press and hold again pressed for like a minute. I don't know what is happening, but as you say, I was expecting to be cause of the firmware since I have not update and didn't need. Is there anyway I can install the firmware for my laptop with another laptop? So that its closed? or have an idea to open my laptop?

  Thank you!

  I don't think it's because you're not updating the firmware is the cause of the problem. So don't try the upgrade if you can. So that you can continue to work on your files try to open the device and recover the hard disk. Place it in an external enclosure/adapter and connect it to the usb port of another unit. Copy all your files on this computer and work on it.

  Worry the Z500 later when you have time. However, of what you have said the most likely cause could be a power supply problem. Whether a defective power supply or battery.

• Lenovo IdeaPad Y560 does not load, battery and charger are OK

  My 3 year old Lenovo Y560 laptop i5 does not load when I turn on with the battery in it everything works normally, but when I plug in charger nothing happens. I checked the charger and it works great, its output is stable 20V. When I remove the battery and try to power the laptop with charger only, LED indicators light up for half a second and nothing happened. With closed laptop battery and charger plugged in, battery light flashes orange, about 3 seconds 10, without the battery even after several hours. I had no problem with jack for charging so far, so I think that is not due to a problem. I tried something with the power for 30 seconds button now and it did not work. Does anyone have the same problem or at least an idea of how to solve this problem?

  It seems that your charger is broken despite the supply voltage. My guess what it cannot deliver sufficient power. Try to find someone with the same charger (voltage, socket and polarity must be the same. There may be several amperes/watt) and try to use it. If you do not know someone who might have a charger as it try stores electronics or services.

• Lenovo B50-50 does not recognize my external hard drive

  I recently bought a laptop Lenovo B50-50 and it does not recognize my external hard drive. It's a WD elements with USB 3.0 storage device. I tried a few of the fixes recommended on other forums, but none of them work. The hard drive comes up is the list in Device Manager, and all my usb drivers are up to date. The hard drive works perfectly on other devices. Other work of readers of fine nib. Normally when the hard drive connected to the aa one device in flashing lights. This does not happen when I connect it to my laptop.

  Any help much appreciated.

  Make sure you use your laptop, 3 USB ports, not then a USB 2 port to see if one will work. If it does not power up to contact Western Digital for support.

  Good luck.

  CB

• Lenovo, yoga 8 does not have upgraded to the latest firmware

  Hello everyone I hope you can help me I brought a lenovo yoga 8 a few days ago, I noticed that there is an update the firmware of B6000_A422_000_085_140402_WW_WIFI_TO_B6000_A442_001_021_140703_WW_WIFI (453 MB) I click Download and let it restart and install (you get this image of the Android with the installation blue after it restarts) after it starts I find myself with the same bet day old before so it has not changed my firmware and if I go to the modernization of the system the same firmware is displayed again. Why is this?

  There is a long thread suggesting that one does not want to get to level 8 Yoga for Kit Kat.

• the Lenovo g500 mouse does not work after the upgrade to windows 8.1

  I recently upgraded my g500 windows 8 for winows to 8.1. But ever since then, my mouse does not work and the keyboard works only after standby. I tried to restore the default settings, but that didn't help. What can I do to fix this?

  Hello

  If the system is still under warranty,

  I suggest that to call a repairman,

  If this isn't the case, you can try to check the keyboard and the Touchpad connection.

  You can consult this service manual

  http://download.Lenovo.com/consumer/mobiles_pub/lenovo_g400g500g405g505g410g510_hmm.PDF

  Hope this helps

  See you soon!

• Lenovo USB G470 does not!

  Hello

  Just bought Lenovo G470 USB do not work properly,

  Deskjet printer continues to disappear and when I iPhone plugin to load - nothing happens, quite simply, it does not detect it.

  The drivers installed and the Device Manager wrote: works correctly

  It is enabled in the BIOS.

  Any help?

  I just noticed that for some reason, the Printer Spooler service has been put on "Manual" I changed it to automatic and everything is ok

• Save dialog box under does not display the list of files

  Terminal Server R2 of 2012.  Dialog box "Save as" for a user does not display the list of files.  The address bar shows the way, there is a form for the file name box, and the user can save the file successfully.  But the space that would show the files in the selected directory is empty.  There is no form for the list of files box, it's just the grey box dialog box space - that is to say, it is not that it looks like an empty folder, there is simply no display form box.

  The 'Open' dialog box appears normal, showing the list of files in the selected folder.

  I had the user close the session on the Terminal Server and access it from another PC, even if I was not expecting to make a difference, and it didn't.  I have also connected on myself and has not experienced the same problem.  So it seems to be user-specific.

  What a setting, the user has selected by mistake, or a mistake any?

  Thanks for any help.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Lenovo S930: Buzzer does not

  Hello

  I just bought my S930 phone about a month ago, but after a period of 2 weeks of use the phone, I just noticed the vibration does not. The first week 2 that my phone can vibrate (mode call, soft key etc.). I never drop my phone or make all things root on my phone. I return to the store originally I bought, they reset my phone and still not fix the problem. They ask me to send for the warranty, but I need to use my phone in a few months (antenna).

  I want to ask you, is - this really common problem, or one of you have the same experience about this problem. May suggest a few auto troubleshooting before as I head toward the center of the guarantee.

  Thank you...

  Flashing custom ROM will void the warranty because it requires the phone to be rooted. But you can try the stock rom flashing, you don't need to root your phone. All you need is the right files and tools for flashing. I'm sure that you can do. "BUT," If you want not something you fool you have better check on the lenovo service center.