Lenovo G460 - updating memory problems...

Similar Questions

• LabVIEW picture control - many updates - memory problem

  Hello

  I have little experience with LabVIEW and am currently using a picture control in one of my applications.

  The idea is that some areas (rectangles) inside the image control that is updated all the time with different colors. (according to a parameters measured)

  I have a large loop that takes a shift register that contains the image control.

  I noticed that the operations of different 'draw the Rectangle' I am the scene are piling up so the memory continues to increase...

  I did a small sample program that demonstrates this behavior.

  I want to update the image all the time in simple control. How can I ensure that memory does not get stored? Are there functions with which I can replace a portion of the image control with a new pixel values rather than simply add these new values each time for the image control?

  Thank you in advance for your help!

  Hi k_tunsten,

  Just remove the register shift. The result is the same, but the performance is much better and will not increase the memory.

  OK this isn't really the same thing, but the indicator buffer puts the old image, so that it looks the same.

  It will be useful.

  Mike

• HDD problem Lenovo G460

  Bought a Lenovo G460 comes with Windows 7 Home Premium only for more than a year. Ran fine with occasional BSOD who disappeared with a soft reboot.

  However, a month ago, the laptop had a recurring problem where the hard drive light does not illuminate on start-up and the rest blank screen and does not start at the startup LENOVO screen. Commissioning is then trial and error when the laptop may or may not have the problem when it is powered. With a fortnight of warranty left, I sent my laptop to the service where the hard drive was deemed to be defective and replaced. The laptop was then returned to me with a new hard drive.

  I then used as normal without any problems for about 2 weeks and the same problem arised yet. This is due to the hard drive again? Or is it a problem of motherboard connector now? Hope that some professionals can get back to me. Thank you.

  could be something else.
  try to remove the battery, disconnect the power supply, press the power button / stop for 30-40 seconds, replace the battery and check if it works.
  also, try to remove/replace, swap the RAM sticks.

  If you still don't see no any display, possible hardware problem. call lenovo support line and send it to the service.

  (and do not wear it in your bag, simply use special bags for laptops)

• Lenovo G460: Impossible to continue after Lenovo screen

  Hello

  I have Windows 8 installed on Lenovo G460 and it worked very well. Suddenly the last 2 days, it hit after screen Lenovo that has F2 - parameter of the Bios and F12 - boot order selection. Same F2 - Bios won't load (say incoming in Setup...) and hung out there.

  I changed a setting before I had this problem in the Compatible Bios to AHCI. I don't know if that's the problem. In order to change this back, its does not not the Bios as well.

  Please help me solve this problem.

  Hello

  Yes. Possible readability of the HARD drive is the problem

  If it's the HARD drive, you can easily remove the HDD of the unit and turn on the system and try to boot in the BIOS.

  Your system without HARD drive should still be able to boot to the BIOS

  Try plugging the drive HARD back see if that fixes the problem.

  Concerning

  Solid Cruver

• Last update to the Version of 5.07.003 Lenovo system update leaves without running.

  The recent update of Lenovo system update does not work on my computer of ThinkCentre M82 on a Windows 7 Pro 64-bit system. The initial screen appears and the program terminates immediately. Center solutions marked Lenovo an error saying that update system had not checked for updates for the last 30 days. I uninstalled the version he and re-installed from the Download Center on Lenovo, but it still does not work. I run it with administrator privileges. I gave permission to run under Windows Firewall. There was an error message saying "Invalid firewall rule" that I don't understand. Before this recent update, update of the Lenovo system always worked perfectly. I think there may be a bug in the program, but I would like to Lenovo views on this problem. Thank you. rwsjr

  Problem solved by MK2117 on 02/07/2015 in advice to remove C:\ProgramData\Lenovo\SystemUpdate\session

  Thank you MK2117!

• computer laptop (lenovo G460) will auto mute

  I use a lenovo G460 laptop with windows 7 64 bit. for these days, or so I noticed that the laptop itself would be cut especially when im watching a movie or using a media player. I would like to get a sound windows after some time, now after that noise, a few minutes later, he would cut himself. So I use the option turn off/turn on the sound on the keyboard to recover the volume. What could be the cause of this problem? any help?

  ship your laptop to lenovo. disable/enable sound problem was a failure 'launch of Council ".

  http://Forum.Lenovo.com/T5/IdeaPad-Y-U-B-V-and-Z-series/U330-mute-unmute-continuous-loop/m-p/56164

• T440s lost Bluetooth after having installed the latest updated via the Lenovo system update

  Hi everyone, my setup - Windows 8.1, Intel Dual Band Wireless AC 7260 with Bluetooth built-in.

  After the installation of the last packet of Intel's Bluetooth (via the Lenovo system update), I lost Bluetooth constantly.

  -J' I tried to uninstall the update of the driver, nothing has changed.

  -J' tried to restore through Windows Restore Point (I did a fresh restore point before you install these updates,) without success...

  I noticed that:

  -When this happened, the fingerprint reader to are featured strange - there is no if light (with green light) initially, Windows, and Windows was asking me a password instead of the fingerprint.

  -In the Device Manager. Bluetooth category disappeared (I was there before the upgrade - for sure.). but I saw a new unrecognized device whose name ends with something like "(de l'énumération n'a pas pu) '-this could probably be the Bluetooth card."

  -L' tray for Bluetooth icon disappeared.

  -The Bluetooth system option submenu and its devices in the Windows settings disappeared (and it was here before).

  -Looking for Bluetooth in Windows 8.1 returned property (with Win + W hotkey) framework "set up Bluetooth devices" or similar, but when I clicked it, it couldn't access this option - just took me to the main configuration screen.

  I had to do a restore of the system using Linux (thankfully made a full HD image backup of the HDD and SSD using Clonezilla readers - that was the only way to fix this-instead of complete reinstallation of Windows).

  The only driver that works for me is the Intel version 3.1.1307.364 issued on August 1, 2013.

  -Anyone else had similar problems?

  Apart from this, the Bluetooth disconnects always happen: see http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T440s-major-WiFi-and-Bluetooth-instability/...

  Can someone give me some advice please?

  I need help with this.

  I found a solution to this problem.

  Apparently, installing bluetooth driver through update system does not install it properly.

  So I downloaded the latest driver of Lenovo driver download page, and instead run autorun.exe, I sailed to 64-bit dir and then run the installation program.

  Everything works fine now.

• Lenovo G460 SM BUS Controller driver missing in Windows XP

  I have Lenovo G460 and I installed Windows XP Professional, but I'm unable to install the SM Bus controller driver, I have installed Chipset Driver serveral times but the problem is intact.

  The instance id of device for SM Bus controller is provided for in:

  PCI\VEN_8086 & DEV_3B30 & SUBSYS_38BF17AA & REV_05\3 & 11583659 & 0 & FB

  I have already installed the following

  (1) Intel Matrix Storage Manager Driver

  (2) Realtek USB 2.0 Card Reader Driver

  (3) Intel Chipset drivers

  Any solution for this?

  Thanks and greetings

  Kamal

  Re - install this driver
  http://consumersupport.Lenovo.com/UK/en/DriversDownloads/drivers_show_2540.html

• Cannot run Lenovo System Update error tvsu.exe has stopped working

  Original title: tvsu.exe has stopped working

  When I run it on my WIn7 64 bit notebook Lenovo System Update v4, I get the following:

  TVSU Application has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I called Lenovo and they say it's a Windows problem. This message looks like a standard message for a particular type of problem. Ideas for a solution?
  Thank you

  Thanks, Eddie!

  I've been reluctant to use these registry cleaners too but had no choice. They well with basic cleaning after uninstall. It is heartbreaking how reckless SSII is during the cleaning of the registry during the uninstallation of their software. And some of the best cleansers will warn you if a fix is dangerous or not you can not run it. But what sometimes happens is that vacuuming can cause two problems for everyone that it fixes if you aren't careful.

  I'll try to post on the site you posted. I'll post here if it helps.

• Blue screen after update KB2982791 problems

  I have a Windows 7 update to Windows 8 64-bit.

  Blue screen (Stop 0 x 50) after you apply update KB2982791 for Windows 7 Home Premium 64 bit is also valid for the W7 to W8 update?

  Original title: This applies to uppdated Windows7 to Windows8

  Hello Nils,

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with this particular update (KB2982791) after which there are blue screen in the computer. We are happy to help you in the matter of fixing.

  You can follow the following suggestions to solve the problem as soon as possible.

  First of all, try to follow the link below to learn more about the update.

  MS14-045: Description of the update of security for kernel-mode drivers: August 12, 2014

  http://support.Microsoft.com/kb/2982791/en-us

  In addition, the blue screen (Stop 0 x 50) could also related material being. This can occur after installing faulty equipment or failure of the installed equipment (generally associated with a faulty RAM).

  In addition to the advice provided, try to run the Diagnostics memory test to check memory problems. See the link for the same mentioned below.

  How will I know if my computer has a memory problem?

  Additional information:

  Resolution of errors blue screen in Windows

  Note: When you use Sys tem Restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Important: When running Chkdsk on the drive hard if bad sectors are found on the disk hard when Chkdsk attempts to repair this area so all available data on this risk be lost.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you come.

• New PPr upgrade and memory problems now

  I upgraded my version of PPr CC 2015 20 days ago and I went back to make a project that I had previously worked on and made more than 3 weeks. Now, it will not be made and the computer is just running out of memory and encoding is abandoned. I am on Windows 7 with a 2 years old i7 processor and have been able to use the first Pro CC 2015 without problem until the upgrade to the latest version that came out about 20 days ago. Are there bugs that are being developed here? Thanks for any info. I had the project made out by removing all effects to make sure it was a memory problem and quite sure the file render out with effects off the coast. However, I could make with effects on before this update.

  Thanks for you response Brian.

  Can you remove the effects of light and then give it a shot? Effects of light seem to be common with those who have reported this problem.

  Thank you

  Regalo

• 12.4.3.1 update volume problems created?

  12.4.3.1 update volume problems created?

  Hello

  I had no problem with the Volume in the latest version of iTunes. Can you give more details about the problem you are having?

  Jim

• Equium L20-197 - memory problem

  I have memory problem with pc-world of computing L20 and currys sell the L20 with suite spec 256 MB of main memory and 128 MB of video memory (up to 128 no) when this is not the first case of all memory is shared and there are 64 MB main memory and when you try memory video in bios , it won't let you upward in rising to 128 unless you install another memory stick no matter who else noticed this problem? I know that the previous model of the L10 with intel video chipset was supposed to allocate depends of the video memory load, but there is no mention of this on the ati chipset model. all the ideas!

  Hello

  AFAIK usually specification is 32 to 128 MB shared memory. Probably, it should be possible to put it in the BIOS. On some units with ATI graphics card, it is possible to put it under properties of ATI (display properties > advanced). There is an option to change the value of the AMU which will change the RAM allocation shared to the graphics card. It's usually adjustable 16 MB, 32 MB, 64 MB and 128 MB.

  Can I really don t give you answer correct but my friends a laptop with 512 MB RAM and it works fine.

  Good bye

• Why am I getting SHAREit ver1.0.38.379 from the download page, but ver2.1.4.0 of the Lenovo system update?

  I would use SHAREit app on my T420(MTM: 4177Q7U) Win7 32 bit PC but not install it again. Then I ran Lenovo System Update to check for updates. He scored a single pack of SHAREit 2.1.4.0. I ignored him.

  Then, I accessed the Lenovo homepage (see link below) and downloaded an application of SHAREit. Installed and found the version ID '1.0.38.379 '.
  http://shop.Lenovo.com/us/en/accessories/software/apps/?menu-ID=lenovo_apps

  I'm a little confused and surprised. Why Lenovo provided different versions of SHAREit since the home page and to download Lenovo system update?
  Where should I get the updated version of official release SHAREit for my Windows PC?

  Thank you!

  You will always find the latest version of SHAREit link below:

  Download SHAREit for Windows, Android, and iOS.

• Lenovo System Update - update of the catalogue

  What happens with the Lenovo system update? We get an error that the package catalog is updated? We have several models here and its happening on each of them. I can't find anything about this update on any site of Lenovo, and the answer I received assistance was "Sorry." Also, they weren't able to tell me when they think that this will be corrected.

  EDIT: spelling.

  My account manager come back to me. It is said this is resolved now, and I see the same thing.

  If you are able to provide an explainantion as to why he went down it would be appreciated. No communication was available on a Lenovo or forum site. Very dissappointing.