Lenovo G500 does not start

Similar Questions

• Lenovo Z585 does not start on a DVD - jump directly to Windows

  Hello, I just got a new IdeaPad Z585 from newegg, and I can't figure out how to boot from a disk in the drawer of the DVD.

  I tried to open the BIOS and change the boot order, as well as simply go directly to the start menu. I tried with UEFI both active and disabled, as well as Secure Boot both enabled and disabled. No matter what I try, it does not start in any DVD.

  I try to install Linux and tried different discs and distributions of this. When no even reached GRUB, I tried a Windows 7 installation disc, and even that is ignored.

  What should I do?

  Hello
  The secureboot and uefi must be handicapped simaltaneously. You can try if you haven't.
  Also, could you try pressing the novo button to power your laptop. The novo button is the button of reocovery key a small next to the power button. Has then access Startup menu see if it helps.
  Concerning

• Lenovo Y400 does not start correctly

  I bought a Y400 Ideapad in January 2013 and over time, the number of times where I had some random restarts or inability to properly start has increased. For the startup problem I press the power button and I hear the sound of the computer turn on but the screen does not turn on and does nothing. This can continue for many tests until it actually reaches the login screen. Sometimes I spam F8 or F1, just to be able to get to the startup Lenovo screen, but then it does that press the buttons are supposed to do.

  I called support and the last time I called they think that its a few horses of Trojan or virus and they say that the only help they can give me is some service $200 where they call a technician to come look at my laptop. After that call I ran things like AVAST, Malwarebytes and Super AntiSpyware Combofix without result. I used the One Touch recovery to restore the original configuration, and I still have this problem.

  I don't know what to do anymore.

  Hi sdy007,

  Yep

  According to the explanations here on the forums of Neokenchi

  "Calibration retry count is the number of times that the HARD drive has initialized (the head alignment and tracks) when the computer is turned on and it took 91 times to calibrate beaches head to HARD drive - this may seem like an imminent HARD drive failure.

  You can contact the Support technique Lenovo to get the HARD drive replaced it should be covered, you can ask them on your options on getting to this fact.

  http://support.Lenovo.com/en_US/feedback/detail.page?LegacyDocID=MIGR-76613

  At the same time have your saved data if possible.

  Concerning

  Solid Cruver

• Lenovo Y500 does not start

  Hello

  I've had my y500 ideapad for a few years now. One day, my computer froze completely in normal operation. I had to hold the power button to do a manual stop. After that, my computer will not turn back. When I try to start it, I see a black screen, not even the Lenovo Logo. After 30 seconds, there is a single issue of the computer. Thirty seconds later, the fan turns as if under load, then a bit later, the fan to calm down and the computer will beep again. At this point, I can adjust the brightness of the backlight keyboard, activate the backlight of the screen in and out and the lock LEDs Num Lock shift on the job before, but I can't do anything else.

  I tried to connect an external monitor to see if it's just a screen problem, but it doesn't produce any signal on the screen. Important, the same thing happens also when I try to boot in the BIOS using the Novo or F2 button.

  I discovered that by leaving the computer unplugged with the battery for a long time, I can sometimes get it to display the lenovo logo and then start to boot windows. However, he gets as far as the windows 10 logo then goes black and finally beeps, as shown above. It will not fully start in the operating system. The time it takes between the work is around 5 minutes unplugged for a few hours.

  I tried the stock bios flashing (using a USB bootable BACK player) and eventually managed to Flash the bios, but the problem persists. In the rare cases where the computer starts up, I can get to the bios, but as soon as I reboot, it goes back to the black screen.

  I also tried holding down the power button while up to a minute while the computer is disconnected without battery. This seems to have no effect on the amount of time it takes between two attempts to start succesfull.

  So is - anyone help me? From what I've seen, the problem seems to be deeper than the bios (as evidenced by no change after the flash bios). What I can do about it, or I'm on a laptop?

  I finally diagnosed it as the video card. After I reinstalled windows, the computer starts normally and work, but the video card is turned. No video, blue lines outside the screen. I ordered a replacement motherboard, which is about the only way to fix it if you encounter the same problem that I am. Do not know what started the error if. Could have gotten just old.

• G500 does not start Grub Rescue problem

  Just purchased a G500 laptop and installed Win7 and ubuntu.

  Next day morning peripheral gives that ' the unknown filesystem, grub rescue > ' message.

  One key recovery button does not work. Cannot get into the bios, so cannot change the opening via USB boot sequence. Tried the F2, F10, F12, ESC, Del possibilities and with the Fn, but bios combinations shows not itself.

  I tried win7 and ubuntu cd, nothing works.

  What type of camera to buy? Every time that MBR broken, should I send this service?

  I really frustrated, this should have a tag on, "not for linux!

  Finally

  removed the battery, removed the bios battery.

  Press the button for 10 seconds.

  plugged the battery at the back.

  Press F2, F2 just not with Rem and waila here is the bios.

  It shouldn't be this hard.

  Note of the moderator; swear implicit edition rules of the Forum

• Lenovo E560 does not start after the BIOS update

  Finally, gave in the throbbing Lenovo and updated the BIOS on my E560 - big mistake.

  He's been through and installed correctly, no problems with chess, etc. (finally none that appeared on the screen).

  The laptop delivered to market very well, he crossed and updated the BIOS, restarted once and... nothing.

  At the present time I jumped the battery and power, reset the device (press the pwr for 15 sec, etc.), removed all devices, etc., etc., google for similar events and so little matter what I did, the laptop is as dead as a brick. I have the red on but that is all. Nothing doesn't appear on the screen (so can't see UEFI/BIOS), no fans start and the only thing that does the job is that the DVD drive can be opened.

  It's a relatively recent laptop (minimum 12 months so still under warranty), but as a word of warning to the other owners E560 - DO NOT INSTALL THE latest VERSION of the BIOS update.

  Well not unless you want a weight of expensive paper for your office.

  Managed to get everything sorted out (thanks to Lenovo support).

  Pop the battery and AC, then remove and reinstall the CMOS battery brought the laptop to life.

• Lenovo Z580 does not start after the BIOS update

  I tried to update the BIOS of my lenovo Z580 but when it restarted it says "boot PXE on IPv4/IPv6. When I booted without internet LAN cable there was a window with this: Start menu
  HARD DRIVE
  CD
  IPv4
  IPv6

  Ah yes before you say it on the hard drive of the BIOS is classified more than IPv4/6

  I am running Windows 7 SP1 home premium

  Hello! without doubt, you went to 5FCN95WW BIOS, haven't you? you need to spend in startup mode in the BIOS. I can't remember which option is enabled by default, but there are only two of them - UEFI and legacy. you need to change to one that is not set by default

  In addition, you need to know 5FCN95WW is buggy, and downgraded to 5FCN35WW would be your best bet. Once you sort the boot problem, consult this guide to downgrade: https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Guide-BIOS-Downgrade-from-5FCN95WW-to-5FCN35WW/...

• Lenovo P770 does not start [brick]

  I'll start with a statement: I'm not a smart man.
  To try to get the GPS and compass works on my Lenovo P770 (S121), I managed to successfully brick it.

  I can still push files to the phone via USB, but I don't have the recalcitrant files for it.

  In fact, my question is: is it possible for one-brick the phone? Somewhere, I can get the original ROM and a method by which I can shoot on the phone?

  I fixed it.
  Reformatted all the internal memory, Flash a new ROM, threw ontop MCG and anchored to the BONE, and then reset my IMEI who had mysteriously disappeared.
  The only thing that doesn't work is the internal compass, and that did not work before hand

• Computer laptop Lenovo G500 does not connect to wifi when I travel.

  I've had this problem since day one. A support person of Lenovo managed to connect when I first became aware of the issue, but it would not log the next time I was in a hotel. The support people with the service provider for the hotel wifi could not help me. Drivers have been checked, windows has been updated. Microsoft security essentials antivirus running. At home, I connect to internet through my ethernet cable.  I travel quite often and my laptop is useless, unless a wired connection is available. Help!

  Hi Mario,.

  I imagine the inconvenience that you are experiencing. I appreciate your efforts to resolve the issue. I will certainly help you in this matter.

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period. This problem can also occur if Wi - Fi drivers are not updated properly, or due to changes in the network settings.

  Try these methods below and check.

  Method 1: run it Troubleshooting Internet connection problems.

  Try to run the Internet Connection Troubleshooter that can help you solve the problems with the internet connection.

  1. Press the "Windows + C" to activate the menu of charms or move the mouse to the bottom right of the screen and you will get the menu of charms.
  2. Click Search , and then select settings.
  3. Troubleshooting of type and select Troubleshooting.
  4. Click network and Internet , and then select Internet connections.
  5. Click Next to run the troubleshooter.

  If the problem persists, follow method 2.

  Method 2: Disable IEEE 802 authentication. 1 X.

  To disable authentication IEEE 802. 1 X, follow these steps:

  1. Click Start, type ncpa.cpl, and then press ENTER.

  2. Right click on your wireless network connection and then click Properties.

  3. Click the wireless networks tab.

  4. Under preferred networks, click your wireless network, and then click Properties.

  5. Click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  If the problem persists, use method 3.

  Method 3:

  Follow the steps in the Microsoft help articles below:

  Why can't I connect to the Internet?

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  Thank you

• Lenovo Y510P does not start, the white screen at startup

  Hello world

  I got a Lenovo Y510P with SLI 750 m for about 1 year and 3 months now. 2 weeks (at the time, that I've upgraded to Windows 10). My laptop is suddenly unable to boot most of the time.

  When I press the power, it hangs on the initial empty screen with no logo pop up. I managed to get it started before, simply by restarting again and again, but it's been 3 days and no luck. He simply stays on a blank screen (no), although the keyboard button and the power light.

  Here are the steps I took to solve problems:
  -> Battery removed, disconnected ca, played "suppression of ephemeral power" now the power button for 60 seconds (did it this several times)

  -> RAM removed, changed slots etc. When there is no RAM, the computer continuously restarts
  -> Deleted HARD drive, reinstalled

  -> Removed 2 GPU. When the 2nd GPU is plugged in, the fan will try and turn from time to time

  -> Connectors disconnected to the wi - fi module

  -> Restarted several times

  -> Press the NOVO button, he just brings him to the white screen

  Any advice would be much appreciated. The laptop itself is in good condition and has little physical ware. Unfortunately, is no longer under warranty, and I don't know the cost to send it is quite high.

  
  

• Lenovo P780 does not start

  Hello!

  My P780 worked fine, but suddenly started to work slowly. I uninstalled a few apps. It helped for a while, but again once there are offsets.

  Three days ago, it appeared, that I can't start. I see boot animation, it ends by "Lenovo for those who" photo and a vibration.

  I can always reset with red button near the memory card, but I want to avoid (I have some data, I want to keep).

  Alarm can't wake up.

  Any suggestions?

  Thank you

  Marcin

  Number four in the first image is to perform a recovery by factory default. All data will be erased.

• Lenovo J110 does not start

  
  

  In this case was a clip broke on the CPU fan, so there was a separation between the processor and the fan on top of it.

• Computer does not start after running the utility Boot Lenovo.

  Hello
  I replaced the power supply with a CX550M of Corsair, increased memory by exchanging the 4 GB to 8 GB for a 16 GB total, I added a hybrid 2 TB Seagate HDD and all worked fine until yesterday, about 1 month.
  Yesterday, I decided to run all the tests of the Lenovo startup disk and after that I restarted, the computer does not start.
  When I press the power button, the fan starts and it stops after 3 or 4 seconds and nothing happens, the monitor says no signal, I removed the external USB disk and printer, I reoved the second drive and the same thing heppens.
  Any idea what this problem could be? Would it be a bad power supply?
  Thank you

  Mario

  Resolved, I erased the memory CMOS, moved to following ankle boot, back up the cmos.

  Thank you

• Y50 Lenovo does not start on first boot

  Hi, I noticed that my laptop does not start at the first power on. A press on the Start button, Lenovo image shows, but after a few seconds the power turn off. I need to press the power button and restart the laptop without problem.
  Anyone else having the same problem?

  Good news... It seems that the problem is solved with a restoration of the default bios...

• Lenovo Vibe Z2 Pro Does not start

  Hello

  My lenovo vibe z2 does not start. It was working well before go to bed last night, but when I woke up it was off and I am unable to turn it on. I tried to load it first in case the battery is down, but after 30 minutes of charge it still won't start. Does not blink in all cases. I tired to press volume top + power to try to reset hard.

  It's as if he died.

  What can I do?

  Hello

  Thank you for your response.
  I used the original charger. Nothing has worked. I couldn't even the screen.

  I sent for service, received back it in 10 business days.

  FIX: The motherboard has been replaced under warranty.