VPN site to Site on the Internet second facing Interface

Similar Questions

• After that download site on the internet Web browser says page not found, file 'null' is not found.  Also in the Muse I can't preview the site or pages more. Never had a problem and now I don't know what to do. In Safari and Google Chrome it

  After that download site on the internet Web browser says page not found, file 'null' is not found.  Also in the Muse I can't preview the site or pages more. Never had a problem and now I don't know what to do. In Safari and Google Chrome there is no problem on the internet, but I can't be seen.

  OK, so your last post, it seems the widgets are the cause of the problem. Let's see if we can understand why:

  • Have you tried to create a NEW Widget of emptiness of Composition and which fill with new content?
  • Have you tried a full download instead of only changed files?
  • Also can you check with domain host that send you to the right directory, and whether or not they have made changes to the ftp upload?
  • When you export the site in HTML format instead of FTP download and compare the files that are generated in the HTML folder, they are identical to those published via FTP?

  If this does not help, it would be useful that you could provide us some screenshots of errors you are seeing, you use parameters of publication etc. (you can block-out user name and password for security reasons of course).

  CARI

• How to publish the project web site on the internet?

  I already have the service of the host, the registered URL, and I did not quite sure about to publish the project in VS 2010 on the internet. Thank you

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT audience Pro on MSDN. Please post your question in the Forum. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en/

• A VPN client / ASA cannot access the Internet.

  VPN clients can get to the servers internal/DMZ but not Internet. This is the partial config of the SAA. TIA

  Pool VPN 10.17.70.0

  DMZ 192.168.100.0

  172.0.0.0 internal

  -------------------------------------

  nonatdmz list of allowed ip extended access any 192.168.100.0 255.255.255.0

  access extensive list ip 172.0.0.0 nonatdmz allow 255.0.0.0 10.17.70.0 255.255.255.0

  standard access list splittunnel allow 172.0.0.0 255.0.0.0

  Global interface (10 outside)

  Global interface (Businesspartner) 10

  NAT (inside) 0-list of access nonatdmz

  NAT (Inside) 10 0.0.0.0 0.0.0.0

  NAT (DMZ) 10 0.0.0.0 0.0.0.0

  Vinnie, happy that you have found here.

  Telnet for asa by vpn session, you need to add this statement.

  management-access inside

  In this same connection see split tunnel vs local Allow only lan access, you can learn the differences and you will better understand your configuration asa related to ra vpn.

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080702999.shtml

• How can I add trusted sites in the internet options?

  I have to add my school as a 'trusted site' sites so I can access my student portal. You can do it easily on internet explore by going to tools, internet options, trusted sites. However, bc I have Windows 8, I have to go through firefox. Help!

  Hi Britnyefryfogle

  Sorry for that. At the moment, you are able to access the student portal? If not, what is the error you get?

  Also add a screenshot if you can.

  Permanent.

  Michael

• having problems when on any site on the internet don't block out of one site to another, just computer fresses?

  Log on to my hotmail and it then takes me who's who or other sites, but Cain can't close a site to another, need to disconnect or change user to spend?

  Hi BradDolby,

  1. what browser do you use?

  2 have you made any hardware changes or software on the computer before this problem?

  If you use Internet Explorer, you can follow this link & check if the problem persists.

  Internet Explorer does not start or stops responding

  
  Reference: slow Internet Explorer? 5 things to try

  Hope the helps of information.
  Please post back and we do know.

• Firefox displays only numbers and no text in some web sites. whereas the Internet shows explore them all to the same web site. What is the solution?

  When I click on a link in a web site, it is supposed to show the details on another page of the same website with text and numbers. But it only shows numbers. Why?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Alternatively, you can try to start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if it helps in the case where your security (firewall, antivirus) software causes this problem.

• Unable to access most of the WVC80N sites on the internet

  I installed the WVC80N on my home network. Of the House, I can access the video camera using the URL standard xxxx.mylinksyscam.com:1024. However when I'm in my workplace firewall, I can't connect using this URL. At work, I have no difficulties to view several video like Yahoo, YouTube and sites of standard media. When I saw that I couldn't connect, I took the same laptop at a public library and was able to connect to the URL xxxs.mylinksyscam. However, others said that they cannot connect their own systems of the House to my linksys URL.
  I guess my corporate workplace and most other places 1024 to block the port of the public library is less restrictive. I would like to change my port to one that is no longer available to most of the places. My optical fiber router and modem are combined in one device Verizion FIOS M1424WR. I might add a few transfer for the two 1024-80. If I also disable my Alternate access Web Port option to use port 80. Port 80 would have a better chance to be accessible in a standard firewall of the company location?

  I solved my problem. It's easy to fix. All I had to do was Add Port 80 for the transfer rules in my verizon FIOS router.
  Thank you.

• VPN: Fulltunnel cannot access on the internet

  Hi group!

  We have an Asa 5505 in our basket.

  I want to connect our office via vpn to our Asa. It should be a fulltunnel, because in our office many ports are blocked by our provider and I want to use our rack-public interface and therethore a split tunnel is not really good.

  But if I accumulate a fulltunnel I have no connection to the gateway. (Inside) rack servers can access outside.

  I have attached our config. Thanks in advantage!

  Gerd

  Could not properly read your config, pourrait you reattach config in a readable format, but I see that your vpn pool is 192.168.0.0/24.

  To access internet of RA in fulltunnel you need two statements, try adding these two declarations, and let us know how it works.

  permit same-security-traffic intra-interface

  NAT (outsisde) 1 192.168.0.0 255.255.255.0

  Rgds

  -Jorge

• Make the remote web server accessible via VPN Site to website

  We have two test sites that are connected by a tunnel IPSEC VPN site-to-site (hosted on a SAA each site) over the Internet. We are trying to set up an environment to test two web applications running side by side. Two web servers are running on the Site of Test 1. We don't have the same public IP available at each site.

  To address the public site 1 unique IP address restriction, we try to install ACL and NAT rules to have 2 Site accept traffic from the internet and send it on the site to the other tunnel. So 1 Web server would accept the ASA 1 internet traffic and Web Server 2 accept traffic from ASA 2 to the other site. Here's a network diagram:

  

  We have difficulties to get this configuration works correctly. Please note that the network 192.168.3.0/24 clients are able to access the servers Web1 and Web2. This question seems to be due to our NAT configuration. This is the type of error, we see on the two firewalls:

  Asymmetrical NAT rules matched for flows forward and backward; Connection for tcp src outside:4.4.4.4/443 dst outside:192.168.1.10/443 refused due to path failure reverse that of NAT

  Our situation seems similar to this post: https://supportforums.cisco.com/thread/2242230

  Any help would be appreciated.

  Hello

  What Karsten said above is true. While it is possible and works, it also means that the configuration is a little more complex to manage. I have done no such features in a real-life network environment and have always used additional public IP addresses on the local site when a server is hosted.

  If you want to continue to move forward with this so here's a few points to consider and the configurations that you need.

  First off it seems to me that the other server will be organized by the local Site 1 so a simple static PAT (Port Forward) must manage the Site 1.

  network of the WEB-HTTP object

  host 192.168.1.10

  NAT (inside, outside) interface static tcp 443 443 service

  And if you need TCP/80 also then you will need

  network of the HTTPS WEB object

  host 192.168.1.10

  NAT (inside, outside) interface static service tcp 80 80

  Now, 2 Site will naturally a little different that the server is hosted on the Site 1 and Site 2 is the public IP address used to publish the server on the external network.

  Essentially, you will need to configure NAT that both makes dynamic PAT for the addresses of the source of the connection to your server Web 2, but also makes the static PAT (Port Forward) for the IP address of the Web Server 2. Additionally, you have to set the area of encryption on the Site 1 and Site 2 to match this new addition to the L2L VPN connection.

  Unless of course you use an existing IP address on the field of encryption in the dynamic translation of PAT for the source address. In this case, it would take no change VPN L2L. I'll use that in the example below.

  The NAT configuration might look like this

  service object WWW

  destination eq 80 tcp service

  service object HTTPS

  destination eq 443 tcp service

  the object SOURCE-PAT-IP network

  host 192.168.3.254

  network of the WEB-SERVER-2-SITE1 object

  host 192.168.1.11

  NAT (outside, outside) 1 dynamic source no matter what static SOURCE-PAT-IP destination interface WEB-SERVER-2-SITE1 service WWW WWW

  NAT (outdoors, outdoor), 2 dynamic source no matter what static SOURCE-PAT-IP destination interface WEB-SERVER-2-SITE1 service HTTPS HTTPS

  So, essentially, NAT configurations above should ake 'all' traffic coming from behind 'outside' interface intended to "outside" "interface" IP address and translate the source to ' SOURCE-PAT-IP ' address and untranslate destination to "WEB-SERVER-2-SITE1".

  Make sure that the IP address chosen (in this case 192.168.3.254) is not used on any device. If she is then replace it with something that is not currently used in the network. Otherwise, configure an IP address of some other subnet and include in the L2L VPN configurations on both sites.

  Unless you already have it, you also have this configuration command to activate the traffic to make a U-turn/pin on the ' outside ' of the Site 2 ASA interface

  permit same-security-traffic intra-interface

  Hope this helps

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary.

  -Jouni

• Cisco ASA5520 facing ISP with private IP address. How to get the IPSec VPN through the internet?

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  Hello guys,.

  I have Cisco ASA5520 facing the ISP with private IP address. We don't have a router and how to get the IPSec VPN through the internet?

  The question statement not the interface pointing to ISP isn't IP address private and inside as well.

  Firewall configuration:

  Firewall outside interface Gi0 10.0.1.2 > ISP 10.0.1.1 with security-level 0

  Firewall inside the interface Ethernet0 192.168.1.1 > LAN switch 192.168.1.2 with security-level 100

  I have public IP block 199.9.9.1/28

  How can I use the public IP address to create the IPSec VPN tunnel between two sites across the internet?

  can I assign a public IP address on the Gig1 inside the interface with the security level of 100 and how to apply inside to carry on this interface?

  If I configure > firewall inside of the item in gi1 interface ip address 199.9.9.1/28 with security-level 100. How to make a safe lane VPN through this interface on the internet?

  I'm used to the public IP address allocation to the interface outside of the firewall and private inside the interface IP address.

  Please help with configuration examples and advise.

  Thank you

  Eric

  Unfortunately, you can only complete the VPN connection on the interface the VPN connection source, in your case the external interface.

  3 options:

  (1) connect a router in front of the ASA and assign your public ip address to the ASA outside interface.

  OR /.

  (2) If your ISP can perform static translation of 1 to 1, then you can always finish the VPN on the external interface and ask your provider what is the static ip address assigned to your ASA out of the IP (10.0.1.2) - this will launch the VPN of bidirectionally

  OR /.

  (3) If your ISP performs PAT (dynamic NAT), then you can only start the tunnel VPN on the side of the ASA and the other end of the tunnel must be configured to allow VPN LAN-to-LAN dynamics.

• Wireless connectivity problems: Windows Vista displays connected to the internet with good signal, but cannot access the internet more than a few seconds.

  Hello

  Recently, I brought a Dell with Windows Vista and a Belkin Wireless adapter in my house somewhere else. The computer has never had problems connecting to wireless internet on the other networks, however since the move I was not able to access the internet. Sometimes the network shows only a local connection and not Internet and other times, the network has a strong signal, a network identified and even an internet connection, but when I open any browser, it is only able to load the Google homepage and I cannot navigate anywhere else. I turned off all firewalls and even uninstalled all 3rd party software protection. I checked all my browser settings and made sure they detect automatically the IP settings and proxy settings. In other words everything seems in good shape, but I still have no navigation capability. Any ideas?

  It turns out that I had to remove all the old Wireless USB software that had been used previously (there had been other versions of Belkin and Linksys). I then used the computer from my friend to download suitable driver on the Belkin site for the internet adapter USB I used and BAM.

• Unable to connect to the internet and VPN in the network.

  I have an ADSL account and when I vpn in our network using cisco VPN 3015 vpn client can't access the internet more locally. I have to use our internal proxy server on the network. Is it possible to make the vpn tunnel but also use the local internet DSL for browsing connection?

  You must set up split tunnelling tunnel, while only some packets are sent through the tunnel, the rest get out in clear packages just as usual.

  In 3015, create a list of network under Config - Mgmt policy - traffic Mgmt - list networks, this list includes your internal networks (you want to be dug traffic). Then go under the group to which the client connects to, on the Client configuration tab, select only the network of tunnels in the list, and then select your list from the drop-down list box. Reconnect and're you good to go.

  Keep in the spirit of split-mining is considered a bit of a security risk because your PC is now accessible from the Internet AND you have a VPN directly in your internal network. If someone can take possession of your PC, then they have access to everything. You can also watch in allowing both client firewall stuff.

• Connected to the Internet of VPN remote access VPN clients

  Greetings,

  I need to remote VPN clients to connect to the Internet from the same server VPN ASA

  "client connects to ASA the external interface VPN tunnel can access Internet from the same external interface ASA new."

  Thank you

  you need to configure "same-security-traffic permit intra-interface" on the SAA.

  Also, need to configure the relevant statements of nat for your range of pool of customers.

  i.e.

  Global 1 interface (outside)

  NAT (outside) 1 access-list anyconnectacl

  where anyconnectacl is the pool for your customers:

  permit ip 172.16.1.0 access list anyconnectacl 255.255.255.0 any

• I installed a copy of XP - now I can't connect to the internet.

  We have just received a new laptop, so we moved things around.

  We had a desktop computer that was under Windows 2000.  We also have a lptop that is provided with Windows XP.  I just installed XP on the desktop - now I can't connect to any site on the internet. The 3 are connected using Network Magic to manage the network

  The resolution of the screen on the desktop is also off now.  I don't get the 4 colors of the Windows symbol & the background is distorted.

  I can solve this mess?

  Hi GinaQQ,

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article mentioned below.

  Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

  http://support.Microsoft.com/kb/307164

   

  Method 2: Also, try to reset the TCP/IP Protocol and check the results.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

   

  You can also view the article mentioned below for more information about the screen resolution:

   

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

   

  Let us know if that helps.