Lenovo Thinkpad R60 home network

Similar Questions

• Integrate a Win7 netbook Windows XP Home network, the netbook Win7 sees the XP computer, but said "you are not authorized to access the XP computer. How to grant permissions?

  Home network (MSHOME) working group worked OK for the last 3 years. DSL, with an attached DLink wireless router cable modem. The network has been implemented with a Lenovo Thinkpad R60 that Windows XP with a USB attached HP PSC 1210 printer (X computer). My daughter got a second ACER laptop with Windows XP (computer Y) and I used the floppy disk created by the network configuration wizard to get connected to the network, everything worked OK. My wife is the mini netbook HP under Windows7 starter edition (Comuter Z) and I used the same disk to be connected, and I made sure that the Working Group has been installed as (MSHOME). Lenovo Thinkpad (computer X) appears on the list of network devices (computer X, Y and Z) but when I started to ADD a new printer, after selecting (computer X) a message box pops up saying ("Windows cannot access (computer X), you do not have permissions to access (X computer).") Contact your administrator to request network access). How can I do this?

  Hello

  Make sure that the share is configured correctly on each computer:

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• IBM ThinkPad T42 would not connect to my home network secure wireless

  Configuration IP of Windows __An internal error has occurred: a device attached to the system is not functioning. __Please contact support services technical microsoft for more help.

  Others have had a similar problem, but I tried the solutions that have worked for them, without success.

  All of a sudden, my IBM ThinkPad T42 wouldn't connect to my home network (WPA2-PSK) secure wireless.  It would be either (1) stay in a constant state of "acquiring network address" or (2) do not recognize networks wireless in the range.  Sometimes, it would connect to a nearby unsecured network, but the network would still not appear in the list of available wireless networks.  So I tried to connect directly to the ethernet, which also did not work.  I then ran the ipconfig/all command at the command prompt and got the message:

  Windows IP configuration
  An internal error has occurred: a device attached to the system is not functioning.
  Contact support services technical microsoft for more help.
  Additional information: unknown media status code.

  So, I went to Microsoft Product Support Services, which does not seem to offer all the solutions.  I searched this error online and found several similar problems - some users had problems with viruses.  Some users had winsock2 corruption, and some recommended to reinstall the drivers for my network cards.  I'm computer literate, but not a computer Wizard, so I was able to follow their instructions for checking the winsock2 corruption (I think), and I think it's very good.  I did a complete scan of symantec, but who came with nothing.  I downloaded the drivers for my network cards which are: Wireless - 11 a/b/g Wireless LAN Mini PCI Adapter, ethernet - connection of a Mobile Intel (r) PRO/1000 MT and was able to update my wireless driver, but not the driver ethernet.  The latter Assistant said we "could not find a better match for your hardware than the software currently installed".  I had wireless internet to work for a few hours last night, even if I still have the same error message when I run ipconfig/all.  I started my computer this morning, and the same problem again - constantly says "address of network acquisition" even if no wireless networks are appearing on the list.  Also, I tried the system restore to see if I could go back before the problem started, but after that I tried several dates, System Restore has still not successful - it wouldn't work again.

  So now, I have my computer in safe mode, and it is connected to the wireless internet, even if the ipconfig/all command still gives the same message, and I am running symantec again to see if I can find something!

  Please help me!  If you think that I may have missed something with the winsock2 or installing drivers, or if there is something I could not find on the internet, please let me know!  I'll try anything.

  Note: I have Windows XP Professional Service Pack 3.
  Network card drivers, I'm running are:
  Wireless: Date - 02/05/2007, Version 4.1.2.156, provider - Atheros
  Ethernet: Date - 24/10/2006, Version 8.7.9.0, provider - Intel

  Thank you!

  Update: when I disable the Intel PRO/1000 MT driver, I can run ipconfig/all with success.  Then imagine it's something to do with this adapter or the driver.  Any ideas?

  OK, so here is what I did to solve this problem.

  I've updated to the latest version of the IBM BIOS

  Then get the WLAN driver from the manufacturer, NOT IBM, NOT Windows Update. Depending on your card, it will be Cisco or Intel.

  I can not stress enough that updates to IBM and Windows update does not work and I lost a lot of time. However, once downloaded directly from the manufacturer (new version) worked flawlessly!

• Lenovo Thinkpad T450s, Sierra EM7345 and windows 10.

  Hi all

  I really have been helped by this forum in the past and really hope that you can help with this question.

  I installed the card and installed the driver - who went down without a hitch. The calculation recognizes the card without any problems. Unfortunately, however, when you insert a SIM card it does not record the SIM card either: "Insert sim" is always present.

  In my research on this forum, it seems this problem is specific to Windows 10 - the system does not recognize the wireless card but does not recognize the SIM card reader. For the record, it seems to work for others when using Windows 7 (but would not be a fantastic solution in my situation.)

  Is there any solution for this?
  Thanks in advance for your time and answers!

  Jack

  The fact broadband point is presented in the settings of operating system, is good. Right click on this item to open the settings pane, take a look at the setting of the AFN. Is there any channel? Is it matches exactly your mobile operator and the rate card SIM connected to? BTW, the SIM card activated, with access to large contract broadband?

  Your modem firmware is pretty obsolete. It might be bugy for your case. But maybe not. The new firmware is more stable in specific cases.

  Read this post if you wish:
  https://forums.Lenovo.com/T5/ThinkPad-tablets/Sierra-Wireless-EM7345-beta-build-4389/m-p/3282540#M32...

  For example, you can install the last fw for this package:
  https://download.Lenovo.com/pccbbs/mobiles/gtwo45ww.exe
  the Readme file:
  https://download.Lenovo.com/pccbbs/mobiles/gtwo45ww.txt

  .. .or use the previous, stable version:
  https://download.Lenovo.com/pccbbs/mobiles/gtwo42ww.exe
  https://download.Lenovo.com/pccbbs/mobiles/gtwo42ww.txt

  Thanks to Intel, the modem chipset manufacturer, updated fw for this modem is a bit complicated. It can be done in automatic mode if:
  -fw loader driver and fw update tool are installed from the package above
  -your network operator IDs (MCC/MNC) are listed in the settings of update fw FLSInformation.xml file (found in the installation folder)
  -appropriate sim card is inserted into the slot of the drive

  If the home network is absent, you must perform the upgrade in manual mode, he needs a few things. We'll do it if you decide you (don't worry, no Internet users).

  So, I say to install the drivers of the Sierra of this package and use only drivers native win10, install the fw items that I mentioned above. Anyway, if you decide, drivers of the Sierra with/without drivers for the selective Mode to suspend (SS).

• Start-up of Thinkpad R60 problems

  I had turned on my Thinkpad R60 morning to check certain emails and left for work. When I got home, the laptop screen was black, and I assumed that it had frozen on the screen saver. However, when I tried to restart the computer, the computer starts to turn on and then let a series of 4 beeps, one per second all the same length. The screen is still the same ordinary black color. If someone can tell me what to do about this problem I would be very happy. Thank you!

  Welcome to the forum!

  I hope that your ThinkPad is still under warranty, because she needs a new card system based on HMM, due to the failure of security chip.

  Good luck.

• Missing drivers for Lenovo ThinkPad T430

  Hello.

  I have lenovo ThinkPad T430 with 10/64 bit Windows

  In Device Manager, I get a few missing drivers:

  Network adapter gw H5321 Mobile Broadband

  Hardware ID:

  USB\Vid_0bdb & Pid_1926 & Cdc_0d & Mi_06
  USB\Vid_0bdb & Pid_1926 & Cdc_0d & Ndis_630
  USB\Vid_0bdb & Pid_1926 & Cdc_0d

  Unknown device

  Hardware ID:

  ACPI\VEN_LEN & DEV_0078
  ACPI\LEN0078
  * LEN0078

  Maybe someone can help.

  Thank you.

  Hello, qrek57

  You install and launch the application from Lenovo ThinkVantage System Update to help you find the drivers and updates, that the laptop needs?

  For Ericsson card update its firmware and install the latest drivers
  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-T-series-laptops/ThinkPad-T43...
  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-T-series-laptops/ThinkPad-T43...

  Readme file can be useful.

  For the 2nd item install Lenovo HW Radio HID Driver
  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-T-series-laptops/ThinkPad-T43...

• Question about the Lenovo ThinkPad Tablet 2

  Hello!

  I am interested in the Lenovo ThinkPad Tablet 2. I'll order one with all the extras when it is available. I hope at the end of the year it will be able to order this nice tablet.

  My question is about the PowerVR SGX545 Intel Atom COS graph: is - this device capable to manage my Dell U3011 with native resolution of 2560x1600px mini-HDMI or via the Dock 2 Tablet ThinkPad (HDMI) connector?
  I did find this information anywhere on the sites, e. g. http://www.lenovo.com/psref/

  I intend to use the Tablet for my university studies, but I also want to work with her at home with my Dell U3011 connected as a second monitor.

  Thank you very much and best regards from the Germany!

  On the TPT2 HDMI port can handle that resolutions DVI single link. So he cannot manipulate the U3011 to its native resolution.

• HP 2335 monitor - need adapter to connect to laptop Lenovo ThinkPad

  I have a Lenovo ThinkPad notebook (Ultrabook) I want to connect my external HP 2335 monitor.  I need a cable adapter, but do not know which is the appropriate adapter.  I see on my screen I have a female port 15 pins.  Can I get an adapter with a male plug into the monitor connector and a USB port connect to connect to the laptop?  Can I get an adapter for the original cable supplied with the monitor (I think it's DVI?), which has a USB connector?

  If anyone knows how to do this please provide guidance as well as technical specifications (description, brand, model number, etc.)

  Thank you

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/ .

  HP L2335 LCD Flat Panel Monitor
  http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/home/?cc=us&lang=en&sp4ts.Oid=374664&task=&AC.admitted=1383957631094.876444892.492883150

• Lenovo ThinkPad won't start

  Hello, I'm having a problem with my Lenovo ThinkPad T520 running Windows 7 Professional 64 - Bit. It has a processor Intel Core i5 vPro 4 GB of RAM and a 500 GB HARD drive. It worked fine up until this point. Here is what happened.  It started when I was surfing the web tonight and it froze. I could not click on the 'X' button, use Alt + F4 or Ctrl + Alt + Delete. So I decided for a difficult start. I pressed the power button until it stopped. When I start again, it froze on the Windows splash screen. I waited for about five to ten minutes and started hard again. This time he asked me which option to start, I wanted to use. Start Windows normally or something like return on error. I tried the error recovery option but it was without result. I started again and it froze again. She is still ongoing now. Need help, tell me what I need to do. I hope it has nothing to do with the material because the PC belongs to my work. >_

  Regardless of the fact that he belongs to my work, I am a system administrator.

  You are a system administrator of employment in question of title?  If so, you must solve the problem.  :-)  Or you are just an administrator on the system in question?  Having administrative rights does not make you a sysadmin by title.  * smile *.
   
  No offense meant, but the wording of your question was more like an end user explaining what a system administrator explaining.
   
  You can start safe mode?  If so - how does it work?  You can start using the safe mode with networking?  If so - how it works in this mode?
    
  So you're saying that nothing has changed between her works and does not other than gel?  No updates, no new hardware or software installed, etc.?
   
  Have you tried to use the system restore to go back to a point before the system had problems?
   
  Can you use a Ubuntu boot CD and run it from the CD player to see if the machine starts like that and be usable?
   
  You have the media/method of system recovery in mind and you have a backup of the data, you might need the machine (or a method in place, if you are a system administrator, in order to safeguard a complete system so that you can extract data from such backup after a recovery?)

• Can I use 2 routers on my home network?

  Can I use 2 routers on my home network? I have a modem/router combo Xfinity but my Airport extreme must be a router that is better than what came with the Xfinity plan. I was told you can use 2 routers for various computers (iPhone, iPad, iMac, etc) and choose the one that gives the best range and result.

  Do you use a separator line and then to the cable connection? Or would I connect the Airport Extreme in the router/modem by an Ethernet cable Xfinity? In any case, what has worked for you, assistants out there?

  JIM

  Do not use 2 routers, they will conflict (without careful configuration) and even when they are not there is nothing to be gained by.

• Why Firefox Sync does not work on my home network, but at work?

  Firefox Sync on my laptop does not work when my laptop is connected to my home network, but for example if I'm at my desk.

  The internet connection in my house is fine, I can surf the web with this same Firefox on IPv4 and IPv6, DNS etc. also works. Connection to accounts.firefox.com works also, as Firefox for the sync account. Only the synchronization process runs aground. On my desktop at home, I have exactly the same problems. When I open https://sync-209-us-west-2.sync.services.mozilla.com/ in a browser tab, I see a confirmation message that synchronization runs on this server, so apparently the network path between my computer and this server is free.

  After investigation with Wireshark, I see the TLS negotiation successfully, then packages the client was able to respond and after some time, the server closes the connection (encrypted alert). Apparently, no content is transferred between the client and the server. I have attached a screenshot of how Wireshark sees the conversation between the server and the client (sending pictures here did not work so I put on the web: http://ibin.co/1zXABHKdj5mA).

  To exclude a possible configuration problem or bad module, I created a clean Firefox profile and logged into my account in Firefox, but this shows exactly the same problems.

  Fun fact: Firefox on my Android phone will sync on my home network.

  Below, I will link two logs, a successful synchronization (corporate network) and a synchronization failed (home network):
  Sync @ Office: http://pastebin.com/rZmfrbdL
  Sync @ home: http://pastebin.com/a3KUCevJ

  The problem seems to be with your ISP - you can refer to https://bugzilla.mozilla.org/show_bug.cgi?id=1118958 and they may be able to find a workaround by changing your diet or to help you configure a different MTU for the network.

  I hope this helps.

  Mark

• A certain website says 'server not found' on the home network, but public wifi site loads.

  I'm trying to access a secure site to my online school. At home, my desktop computer and my lap top came up with "Cannot find server" page on trying to connect. ALL other sites work fine. Public wifi in a cafeteria, the site works very well. I asked my school on this subject and have said I'm talking to my ISP (Qwest). I did, and they were not able to give me a solution and referred me to my school IT Department. I know this isn't a problem with the site of the school, because it worked well on a different network. I also tried to load the site Web of Chrome and IE, and none of them will not let me connect to the site on my home network.

  Any help would be appreciated!

  Too bad! I thought of it on mine. I had to change the DNS settings from my service provider to a third party.

• Sudden home networking issues

  Product name: Macbook Pro 13 inch Retina early 2015.

  OS (when the problem started): Yosemite 10.10.5

  OS (now): El Capitan 10.11.5

  The problem

  So yesterday my Mac Wifi connection dropped suddenly. So, I moved to lightning Ethernet connection which has varied between does not and VERY slow, almost unusable. I work from home online, so the last 2 days I was not able to do anything.

  I can connect to Wifi, Mac said Internet: accessible. I can ping. But can not browse and other tools such as Google Drive and Dropbox are unable to connect.

  So far, this would indicate a problem with my network or my router, rather than my right to the machine? However, my Android phone works fine with Wifi.

  Things I've tried:

  I've been on Yosemite 10.10.5. I followed all the troubleshooting steps basis and the following:

  • Reset my SMC.
  • Reset my PRAM.
  • I turned off the Bluetooth.
  • I deleted the files in Network preferences to reset a reboot.
  • I "forgot" my home network to reset it like that.
  • Running reports "wireless diagnosis" everything is "as planned."
  • Attach to the Wireless on my Android Nexus 5 X hotspot. Connects to the Wifi but not Internet after 10 seconds. Sometimes not at all.

  Then, I took a backup and upgrade to El Capitan. The strange thing is, about an hour after the upgrade, my ethernet cable was working fine again! About 14:00 yesterday at 09:00 today when I turned on it to start working.

  NOTE: I connect to the network fine, and Google Drive and Dropbox plugins start synchronization. Full report 'sync', then, after about 10 seconds, they say "unable to connect". Holding "option/alt" and clicking on the Wifi symbol in the toolbar says "Internet: accessible. Indeed, I can 'ping' very well. There is no loss of data packets. So could it be a software on my machine which has suddenly become crazy and prevents connections other than the pings? I have run Avast Anti-virus, but which has worked for months and is running as I type this. Similar posts often get answers their questions about firewalls and proxies that might cause the problem. I only have Avast.

  Affirmations:

  If it was a problem with my router, my phone would not have a problem too?

  If it's a problem with my Mac, why would Internet suddenly started working again after a while?

  I write this in a coffee shop, using their Wifi and it works fine. I don't have whatever it is off on my machine. Yet once, which suggests a problem with my network rather than the phone.

  Is this something that could be fixed to an Apple Store? As I suspected, it works very well to the coffee then probably it would work fine in the Apple store and they don't know what to do.

  I thought only try you geniuses first!

  Thanks in advance.

  It is very difficult to debug an Internet without Internet problem.

  First of all uninstall AVAST from the system. then open system preferences > network > enter your network > what is place please do as automatic. What, the other DNS settings, preferred networks etc please post.

• Can't view the YouTube video because there is an active filter. It happens on the job and home networks and only on Firefox (15.0.1).

  After update 15.0.1 Firefox and Adobe Flash Player to 11.4, I was unable to view the media from YouTube. I was given a message: "this video is not available with the filter of education allowed.» To view this video, site network administrator will have to add to a playlist. I work for a school district and use my laptop at work so I thought that I got this message because YouTube is blocked on this network. But when I got home, I got the same message on my home network with YouTube videos. I have reset Firefox and he took care of the issue until I'm at work, and the problem happened again with the same message everywhere... I tried to post the same videos on another browser (Safari) and it works beautifully. I'm afraid that if I reset Firefox even once, I'm having the same problem.

  It is possible that YouTube set a cookie to filter which can still be seen when you connect at home. To clear cookies for youtube.com, you can use one of these:

  (1) 'dialog show Cookies' tab in Preferences/Privacy:

  Firefox > Preferences > privacy > 'view the Cookies '.

  Type yout in the search box at the top to filter the list and remove each cookie individually.

  (2) "view Cookies dialog box" in the Page Info/Security tab:

  While displaying a page on the site-

  Tools > Page Info > Security > 'view the Cookies '.

  -remove each cookie individually.

  Then, try to reload the page and see if Youtube behaves differently.

• Need to understand my situation of home network

  Hello

  I'm having a little problem, trying to figure out how to delegate my home network since I started working out of the House. I have only the internet (100 Mbps) with no cable so I spread all my shows across various applications on two smart TVs. I also have a 7 year old who plays xbox live, I have a few home automation (6 lights shades phillips, iHome 3 caps, bolt dormant Schlage, Canary camera and Ecobee Thermostat with 3 sensors) 3 iPads, 2 iPhones, AppleTV 2, 1 macbook pro, 1 desktop and 1 iMac. For now, I have the newest Airport Extreme connected to my modem with shades phillips, Samsung Smart TV switch and and an Airport Express (Bridge Mode) point. I have the CANARIE camera and an Apple TV connected to the express. In the House, I have another Airport Express station I have my Sony Smart TV hooked up to the Wan which is hidden (I'm the only person who uses it for my iPhone). I also have one of the Apple TV hooked up to it. In the children's room, he has the Xbox one hooked and video streaming or playing games. I always know when he's on the Xbox because of the latency in the living room TV (The Samsung) or the desktop.

  My House is small enough, 950 square feet, brick ranch-style house. The bottom is being renovated to become half of my office. I see if I can do something to speed up my internet. Currently, I only shoot in, 50 MB/s, when I should be around 70 or more.

  I was looking for the Netgear router Nighthawk or a Linksys router and using the Airport Extreme as a switch. I have my office just now set up in the living room and I think move the modem to my office (10 feet away from its present location) so I can have my phone/fax VOIP hooked up to the modem and then have my desktop connected directly to the router using an ethernet cable.

  I'm trying to understand it and it has been bothering me a lot, someone of you have an idea of what would be best implemented?

  Thank you very much I appreciate your help and your time.

  Ethernet is always better.

  If you are renovating the GET home ethernet installed in the walls and several points around the House... you will be amazed at the difference.

  For wireless use never repeat... but you can use multiple wireless access Points. (installation of apple routers for the wireless is just fine).

  I was looking for the Netgear router Nighthawk or a Linksys router

  These will have a wireless range superior cf Apple... but still, you don't want to extend wireless... If the signal is not good enough... and when you have a lot of walls of brick which is very likely to happen... then have another WAP and ethernet.

  Read the basic how to have good wireless everywhere in a House...

  Entire home wireless.

  http://www.SmallNetBuilder.com/basics/wireless-basics/31576-the-best-way-to-get-ensemble-Maison-sans wire-coverage