Lens adapter

Similar Questions

• EOS LENS ADAPTER KIT M

  I have several EOS ELAN for old SLR LENSES and a new digital EOS M. Is there an adapter for old to adapt to the new?

  There is a card called the "Mount Adapter EF - EOS M ' and you can find that it listed as an accessory of camera on this page:

  http://www.USA.Canon.com/Cusa/support/consumer/eos_slr_camera_systems/eos_digital_slr_cameras/eos_m _...

  However, Canon offers more EOS - M in the North America market.  This means that you would look for dealers who still have this in stock.

• Y at - it a conversion adapter for my SALT 1855 fisheye lens

  I am looking for a lens adapter to use with my Sony SALT 1855 lens. What options available for my NEX camera arte 7. ?

  Thanks, that helps a lot, Congrats and accept as a solution, Tom

• Length of the Canon PowerShot g15 58mm adapter

  Hello

  I recently bought a bunch of lenses for my Powershot G15.  The main requirement was the gun adapter to fit on the existing, no removable lens.

  The barrel fits the width, and the additional lenses are brilliant.  However, when I extend the zoom on the powershot, the existing goal hit the cannon, imposes an error and the camera stops.

  I had a quick glance for the longer barrels adapter, but it only seems to be available to 58mm.

  My questions are:

  (1) I'm not supposed to zoom when using adapter lenses?

  (2) is there anywhere to buy a longer barrel adapter?

  (3) is there a trick I'm missing?

  (4) do I just totally wasted my money on this camera and this lens pack?

  Sorry if this has been answered before but I've never used a forum... bit confused.

  Thank you

  Gemma

  The lens should never hit your lenses added! Do not continue or you will ruin your camera.

  Have you bought brand gun or a brand of alternative?

  What attachments lens are you using? They exceed to below the top of the lens adapter?

  The correct part number is THE DC58L and Canon says.

  The lens of Conversion of THE DC58L adapter is only compatible with the TC-DC58E, the MP-14EX Macro Ring Lite tele-converter and the Macro Twin Lite MT-24EX. With older lenses of conversion is not recommended.

• NEX5

  I want to improve the lens and I have the following questions:

  1. should I buy lens adapter or sony?
  2. What is the best?
  3. If I bought adapter I see different type don't know which I buy
  4. Thank you
  5. Moataz

  It depends on what type of photography you want to try weather it would be portraits, landscape, macro, astrophotography, etc. who can help you decide what type of lens you want or need, or you're looking for a zoom lens all-in-one walkaround. Regarding the cards, there are many choices depending on what you want to use as e-mount for nikon or canon if you want to use these lenses on your nex5 marks or you could buy the adapter sony to use a mount lenses, or skip the adapter and use the mount lenses native e. You must decide what you want to use with your nex5 to know what adapter buy lenses.

• LAEA4 is waterproof?

  LAEA4 is waterproof?

  No selling seems to be LISTING feature.

  This is a BIG news for A7r + weather Sealed lens.   like the 50mm f1.4 ZA SSM

  Someone said there is a leak of light... which to me should not happen if it is waterproof.

  There is a post on the flight of light here: https://www.facebook.com/groups/SonyAlphaTalk/

  According to the Manual of THE EA4, the lens adapter is dust and water-resistant. However, there is no guarantee that dust or water will not enter the unit.

  If my post answered your question, please mark it as "accept as a Solution.

• Lightroom has lines in the imported image.

  I'm shooting with a Sony A7II and a goal of 50mm 1.4 Nikon with adapter. I HAVe computers 2 (laptop and desktop) with installed lightroom.  When I import files on the laptop that display images is ok; When I import the desktop each file has 3 or 4 horizontal lines at the top half of the image.  What am I doing wrong? .

  It seems that a different card reader has been around.  I deleted all the photos with the lines and imported using a reader of different cards with no problems.  If it's funny that the only appeared lines on files that have been taken with the Nikon w lens / adapter and not the kit lens.  O well something like that be done to turn the gear.   Thanks for the answer for everyone.

• Cannot create the 11.1.2.1 validate rule in FDM

  Hello
  
  Maybe someone can help me: I am trying to use FDM to import data from EBS, export data to HFM.
  step to import succeeded, when I create validate the rule, I opened Publisher rules and search open to select HFM dimension.
  I find that all of the HFM dimension in research are gray, not available to use.
  It seems that target (HFM) is inactive in FDM.
  I have no idea, I subscribe to the FM11X-G5-E lens adapter.
  
  News in detail:
  version: talleyrand PS1, 11.1.2.1
  DB is Linux, I installed the DB client on server FDM.
  
  
  Could you give me a tip? Thank you.
  
  Best regards
  Samantha

  In the field of validation rule, you need to. to activate the search. Once you do that the dimensions will be available for selection.

• In the filters of Photoshop CS6

  Oil painting: correction of the lens; Adaptive wide angle and vanishing point a re shaded in Ps CS6. I'm using 32 bit vista and Nvidia GTS 450. How can I get these to work?

  If your not sure how to make a screenshot and post on the forum:

  http://forums.Adobe.com/message/4209263#4209263

• NEX-5 300 mm

  I have the 200mm lens, but want to buy a 300mm. Anyone know what I should buy? I said 300mm won't autofocus no, which is good, but I also need to buy an adapter.

  I don't know what I have to do. Any help would be appreciated.

  Hi Swinney! Currently, there is no lens 300 mm with frame E. However, there are a couple of glasses of the mount with a focal length of 300mm or more. Please check the SAL-55300 goal. NEX-5 camera will require an EA LA to mount lens adapter , so we can adapt mount lenses.

• Can only mediator handle/support both request and response

  Hi all
  
  I have developed interfaces SOA (11 g, Jdev 11.1.1.2.0) which has the applicant ABC, ABC and ABC of provider Ombudsman.
  I use the AccountingEntry EBO and CreateAccountingEntryListEBM.
  
  1 / in the applicant ABC (synchronous process), is called the database/table, data are sent to the EBS (Ombudsman ABC), also the Ombudsman sends the data to the provider ABC (synch process) where SAP is invoked and response is returned to EBS (Ombudsman ABC) and any further BSE sends the response to the provider when am store the answer back in the table/database
  
  application: applicant-> EBS (plectrum)--> Provider (SAP)
  answer: provider-> EBS-> applicant
  
  The issue I'm facing is with mediator ABC
  1 / in the scenario current, using two mediators, one for the application and another for the answer, am not able to capture the response of SAP (provider ABC) even if the response is sent by SAP, so think for one Ombudsman.
  2/when I use only one mediator who is to handle the request and response, mediator does support this. Please let me know your veiws and apprecaite your help.
  
  Kind regards
  Mehboob

  I've developed a scenario by using the AccountingEntryEBO, using 10.1.3.4 (not the 11 g version you use)
  However for my scenario, you can replace BSE with the Ombudsman.

  We had the following processes:

  1 source adapter (BSE)
  2. the applicant (BPEL) ABC - when this process called the EBS, with an Invoke, you must use a set of correlations (see below), then there is a stage of reception where it waits for a response that also uses the correlationset even.
  3 EBS (BSE)
  4. the ABC (BPEL) provider - call the target adapter and on completeion successfully, then called the EBSResponse process
  5 lens adapter (BSE)
  6 EBSResponse (BSE) - think of the ABC's of the applicant
  7 SourceAdapter update (BSE) - this adapter updates a flag on the table to say that it has been delivered with success or failure. (but can also be used to return values according to your requirement)

  Definition of CorrelationSet
  --------------------

  
  
  Properties = "ns1:CreateAccountingEntryListEBSReqMsg_CreateAccountingEntryListEBM_EBMID_prop" / >
  

  Invoke
  ---------

  
  partnerLink = "AccountingEntryEBS."
  portType = "ebs:AccountingEntryEBS."
  operation = "CreateAccountingEntryList."
  variableentree = "CreateAccountingEntryListEBSReqMsg" >
  
  
  value = "AccountingEntryEBSCorrelationSet".
  model = 'out' / >
  
  

  Receive
  ----------
  
  variable = "CreateAccountingEntryListEBMRespMsg."
  createInstance = "no".
  partnerLink = "CreateAccountingEntryListJDEOneReqABCSImpl."
  portType = "sonabcs:CreateAccountingEntryListJDEOneReqABCSImplService."
  operation = "CreateAccountingEntryListEBSResponse" >
  
  
  value = "AccountingEntryEBSCorrelationSet" / >
  
  

  HTH.

  Stuart

• Essbase and FDQM

  Hello
  
  We want to use essbase and FDM. How to deal with the preparation of the data. do we have to write mapping and workflow as we in informatica.
  
  Pls help on this
  
  Dutta

  Hi Dutta,

  1. we use adapters for source and target

  2. in your case, if the SAP is the source we integrating SAP, as Sage ERP adapter, with the help of which you can pull data

  3. in the same way, with the help of the essbase lens adapter, you can load data in to essbase

  You can find this information in the below
  http://download.Oracle.com/docs/CD/E12825_01/NAV/portal_6.htm

  consult the docs under FDQM

  Sandeep Reddy, Enti
  HCC
  http://hyperionconsultancy.com/

• Shutter A7r vibrations

  Any attempt to anticipate shutter vibration A7r with sony alpha 135 zeiss & 85 mm with sony E mount lens adapter mounting?
  Haven't seen any.

  This review is extreme. No camera is perfect: all compromises inherent.  In the old days, we faced shutter shock in practically all SLR cameras. We have simply compensated by using faster shutter speeds for shots of pocket, tripods for essential work and good techniques - I use these today. Certainly, the shutter is #1 I would like to see improved. I doubt that this may be a software fix. So far, the shock occurs with more than 85 mm, hand held old lenses. Lenses with operating systems do not show any shock. Legacy, the best adapter, more strong must be used.  With a tripod and strong adapter, I am able to produce images with old lenses non - OSS to say 100 mm. I still use a rail system. As a general purpose camera, objectives with small legacy RF Contax G45 G95 lenses, SLR Zeiss Planar and existing Distagon and dedicated new FE, the A7R Zeiss lenses renders superb computer images of pocket.

  Update: before editing for new results: I am experiencing now shock when using the Nikkor ED2.8/70-200 lens when mounted in necklace lens to the heavy tripod head.

• Lens mount adapter

  I have an old Takamur 400mm lens used with a Pentax. Mounting screws. Is there an adapter that

  allow me to use the lens with a Rebel T3. Perform a manual use. Thank you.

  There is available fixing adapters to fit almost every old mount used in the past 40 years to a Canon EOS mount.  BHPhotoVideo online retailer has a large selection of adapters, as well as online experts to guide your purchases.

• I have an old camera a Canon AE1 since the 1970s. Any adapter to fit the old for the new cameras lens

  Can anyone give me any advice on whether I can buy an adapter to fit my old lens on newer model cameras. I have 3 old lens that has worked with the old AE-1 a 55mm, a 35-70mm and a 100-200mm. Any thoughts would be surely appreciated.

  Do not waste your money on an adapter even if they exist. Much better to buy modern lenses that incorporate Auto Focus. The new cameras have an accent like a split screen or whatever your film body has help.