LETTER PROBLEM

Similar Questions

• problem with the vista updates, dates back to December 2008

  In December 2008, I had remote access, now have broadband services. have family vista premium with service pack 1, the problem started when I tried to install the December 2008 windows updates. checked all updates essential etc. then let problem execution, not finished, then computer rebooted as it always does, is gone on the screen, then rebooted, saw the windows bar downstairs and then (as would normally go to LOG IN) it went to black screen and then off, the thing windows tried to start and check the disc and other programs of repair but kept saying could not start. Looked at this time comes to say has encountered an unknown error and could not fix, end was to use the F keys as an administrator login and do a system restore to 5 December and then worked well, have run the check disk and defrag and virus scans etc... now, my pc works fine, but I have not installed updates since December 2008, as know that it will happen if I do. However, I want to keep my vista up-to-date. I think that may be corruptions in the updates in a temporary folder somewhere, but don't know where it is. is - it there anyway to remove the files that can be corrupted or is there another solution, looked everywhere for answers in the forums and helpdesk there were several other people in the same question. My computer work fine, but I wonder if I will ever be able to install an update again. I have to be clear that I can run windows update without issue, it lists later and everything but when it's this thing to reboot it goes back to square one as shown above. Something in the updates is messing up my system and even widows classes as unknown error.

  Annanimo,
  Thank you for visiting the Microsoft Answers community.

  To test your corrupt file system, run the System File Checker:
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Let us know what that discoveries and if we are to advance, support.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• problem connecting to Vista... blackscreen with the pointer of the mouse only...

  Hi guys, can someone help me? I have problem with my vista and wer of the pc win 7, when it is plugged in my users login with their network cables, they enter their username and password, enter the password swithches then screen welcom and immediately afterword the user will get a black screen with pointer mouse only... I tried many patches to that found on google but none of them is a permanent solution.

  can anyone help me pls.

  Hello

  References to Vista also apply to Windows 7.

  You have this problem on more than one machine is very telling. Update all the major
  drivers and BIOS. Also consider the antivirus/antispyware/security programs on the machine and
  those who have ALREADY been on because they can let problems causing remains. Especially check everything
  3rd party firewall.

  If you win a few access check the spectators of the event.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ================================================================

  Blackscreen generic convenience store.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I can't change the way Security Center alerts me. using the center of security in the Panel. In my view, is because of the loss of registry. How can I save or restore, registry settings for Security Center?

  I have check the hkey local machine > software > microsoft > Security Center >, there is nothing in there! How can I create their return?

  Hello

  Are you logged on as administrator? See the links I posted above that tell you how to fix that.

  BTW do not have more than one antivirus on the system at once, even if not used as they
  always will interfere with each other. Be sure to use the removal of the machine tools and/or special
  instructions or a lot let problem causing remains.

  =======================================
  Here's what I use and recommend:

  Avast and Prevx proved extremely reliable and compatible with everything I threw at them.
  Microsoft Security Essentials and Prevx have also proven very reliable and compatible.

  Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

  Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
  (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
  http://www.avast.com/eng/avast_4_home.html

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
  a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

  Thank you very much. I could not really fixed, so he decided to recover my pc as it was abit messed up! I'll keep in mind your suggestions for future use. Sorry for the late reply. Thanks a lot again

• Windows 7 Home Premium Digitall West my Passport 1 TB external hard drive USB3

  Hi, I bought a Western Digital My Passport SN: WDBBEP0010BBK 1 TB USB3.0 External Hard Drive and it does not work in mi Laptop DELL Inspiron N1050 under Microsoft Windows Home Premium.

  (1) is not a drive letter problem

  (2) I can see this device in the Device Manager, but the controller into the unknown. In the other PC works well. My computer laptop USB Ports are OK.

  (3) I have HIS (x 64) free download from the driver Western Digital Support page, but it does not work

  (4) I contact Western Digital Support, they told me that it is a hardware problem laptop or Windows

  (5) I try safe mode

  (6) I update my BIOS of the laptop

  (7) I contact my Support Page for DELL, but it s a tip trouble for them, they want that I restart my so

  (8) I found on the web a few answers on the use of a USB HUB (what?)

  (7) I search web site on people who have the same problem, no solutions to these problems:

  (a) there is no answer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Western-Digital-my-passport-essential-se-1TB-USB/ad1ffba3-093d-4FFF-8252-70b075affb0f

  (b) this boy change the cable (wy should I change my USB cable so works in the other PC?)

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/i-am-unable-to-get-Windows-7-to-recognize-my/0f6720b5-B011-4957-8239-62a07f83e07a

  I need help with these.

  Kind regards.

  Hello
   
  1. What is the error that you receive when you try to access the drive?
   
  2. don't drive appears in Windows Explorer?
   
  3 when you plug in the player you see a bubble of information on the bottom right that says "installation device software /driver.
   
  Please check a user account control prompt in the taskbar at the bottom of the screen when you connect the drive for all indications of the granting of permissions.
  Please try to check the same in all USB ports available on the computer by connecting the drive securely and correctly inserted in the USB ports...
   
  A USB HUB is a device that is connected to a computer via a normal USB port and provides several USB slots to connect additional devices if a particular computer less than two ports a hub can provide more than 6 USB ports.
   
  Method 1

  Step 1

  Check if the problem is caused by third party software conflicts.
   
  Performing the clean boot any third-party program all running in the background is disabled and you can identify the cause of the problem.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   
  http://support.Microsoft.com/kb/929135
   
  Note: Please follow step 7 of the article mentioned above to start the computer in normal startup when you have completed the necessary troubleshooting.

  Step 2

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please post the results of this troubleshooting.

  also see, Microsoft Automated Troubleshooting Services

  http://support.Microsoft.com/GP/mats/zh-TW

  Method 2

   
  Disable your antivirus and check
   
  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
   
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  I hope this helps.

• Catalyst Control Center: Host has stopped working

  Whenever I start my old Toshiba laptop computer for 3 years, I get this message: host of Catalyst Control Center has stopped working and then nothing. I check the current update drivers says it all day, but I went on this site called Driver Whiz and he says I'm wrong 8 things with my computer Says: Standard AHCI 1.0 Serial ATA Controller... out of date... then 2 ATI HDMI Audio... updated... then system devices said ATI 1/0 5 MB... updated... communication processor and then disconnected devices : 4 JMB38X MS Host peripheral COntroller is disconnected, but they want 50 buck for them to fix it when I downloaded what I thought was that it was free so now it's on my computer... UGH!

  My LT is a Toshiba Satellite A665D

  OS: Windows 7 Home Premium 64 - bit (6.1, Build 7601) Service Pack 1

  Processoer:AMD Phenom (tm) II P920Quad Core (4 CPUs) processor clocked at 1.6 GHz

  BIOS: 19:13:52 VER: 08.00.0

  Memory: 4096 MB Ram

  DirectX 11

  I am running Iolo System Mechanic 11 on my machine for detection of spyware, malware, viruses and been with them for 5 years and this has NEVER happened since I was with them. My Toshiba Service Station does not work and tried to contact Toshiba as well, but yet they want the money for technical advice. I know that somebody here is tech savey and I am disabled and do not have the money to repair this laptop so please can someone there give me info on how to get back to his old self of my machine? Oh and btw, I did a system restore, but this message from Catalyst Control Center is yet to come. PLEASE HELP ME AND THANK YOU VERY MUCH!

  "I went on this site called Driver Whiz and he says I'm wrong 8 things with my computer.
  Don't believe one thing, or say similar sites. They are only after your money.
  To top it off they often install software that can be difficult to uninstall, and if
  you don't uninstall it you get messages.
  It seems that there are a lot of discussions about uninstalling the program driver Wiz, but I
  guess the best place to start is to their own site-

  http://driverwhiz.com/support/uninstall
  If that won't uninstall not indeed their software, then you may need to do more
  read other threads.

  "Microsoft downloaded as 13 updates when I turned off my computer.

  I hope that you do not say that you stop the machine while the updates were
  installation. If none simply let problem Windows updates check again and select only a little at a time and let it install, go to learn more. Avoid also the 'Optional '.
  updates, particularly of driver updates.
  In regard to it and the fake driver software installed. If you started having problems after that Windows updates don't you have a restore point from the system that dates back to before that you did? If so do the system restore and then move on the updates again. Restoration can even delete 'wiz pilot' with a bit of luck.

  Now - 'Catalyst Control Center host has stopped working"I suppose you were
  get this error before the debacle "Pilot Wiz"?
  I uninstall the drivers ATI and the CCC software via programs and features and then go to the download page of Toshiba for new drivers. It can be pilots became corrupt, but the "updater" does not know this. It checks only to a version of file.
  Personally, I do not use updates of autopilots. Best to download the installer and install manually, if Toishiba have this option.

  With FB game, you will also want to put Flash Player to - day
  Adobe - Adobe Flash Player Install
  Shockwave-
  Adobe - Adobe Shockwave Player

  .

• I forgot my restriction password, let it please help me solve my problem

  I forgot my restriction password, let it please help me solve my problem

  I forgot the password restriction

• I want to download free applications, but it doesn't let me do it cause I have a problem with my payment, I try to remove my debit card and the option did not appear, I can't choose no for the payment, what can I do?

  I want to download free applications, but it doesn't let me do it cause I have a problem with my payment, I try to remove my debit card and the option did not appear, I can't choose no for the payment, what can I do? This happen after I bought some coins for a game

  You must settle the debt until you can download something else of the podcast episodes on the iTunes Store or select None as the payment option.

  (142394)

• I have a problem with the letter p

  Cuando presiono p be p escribe y followed sola escribe muchas barras diagonal invertida

  Google translate:

  I have a problem with the letter p

  When I press the p and p is written follow-up written itself that several inverted diagonal bars

  Try another keyboard.

  What specific model Mac? This is the Office Mac Pro forum

• There is a section of 3 inches from the window which will not recognize the mouse. It will not let you click on the icons or the screen somehow in this section under the address bar. It is only in firefox when it comes to a problem

  There is a section of 3-inch window that do not respond or recognize the mouse. It not let you click on the icons or the screen somehow. It is the only program that we are facing this problem with.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Since the download of Firefox 4, I have problems of archiving of conversations from my gmail Inbox view. Also, when I go to enter a new event in google calendar, I have to now click the cursor in the box type of the event (it used to let me just start typ

  Since the download of Firefox 4, I have problems of archiving gmail conversations since my Inbox view (one or more conversations) as it says 'No. Conversations selected' when I selected one or more. Also, when I go to enter a new event in google calendar, I have to click the cursor in the field type of the event (it used to let me just start typing) or else he bends and begins to jump to the day view or another month. Does anyone know how to fix one of these?

  I had this problem; But while trying to solve another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset the preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences

• I tried to buy Let It Be the audiobook version and it will not download. Said that I bought it, but will not download. I made another purchase at the same time and had problem now.

  I just tried to buy the audio book of Let It Be version. ITunes says that I bought, but it will not download. I did purchase just before that Let It Be one and it downloaded without problem.

  Is it is not currently downloaded from iBooks on your iPhone app, then it shows on the purchase tab in the download application?

• Whenever I type the letter between f and h (he can't come in here or the problem occurs, so I will use 'p' instead), the locking of the keyboard and an informal search screen is displayed in the toolbar. Also happeninp in emails and 'my documents' but no

  I can't use a certain letter on my keyboard when in Firefox, email or my documents without the Freezin' screen and a pop up appears in my toolbar for a brousin site. The character I can not type is the letter between f and h in the alphabet. I have no problem with this letter in other applications, so I know that's not the keyboard. How to make and use this letter?

  This has happened

  Don't know how many times

  Is a week by o

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use 'Disable all add-ons' on the start safe mode window.
  You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")

• iCloud storage problems. won't let me put more files, even though it says I have 180 GB of available

  Help!

  Try to clean the files from my external hard drive and the Mac and put on iCloud in order to free up space. But, iCloud repeat that it cannot transfer files because there is not enough space. But when I check the info it says I still have over 180 GB of storage space... I want to only 130GB of transfer in iCloud. Why won't it let me?

  anyone else has this problem or has fixed this or give me any advice for me. can not finish my projects for work until I have free space. Super frustrating!

  A = soon)

  Not sure if you're aware but iCloud is mainly designed for the synchronization of data between devices and not as a cloud storage location only. If you have iCloud drive turned on in your Mac and you then attempt to move 130GB of an external hard drive to iCloud, it will automatically also an attempt of placement than 130 GB as a local copy on your Mac (use the menu go to Finder > iCloud drive to access the local copy).

• Problem when I type the letter "o".

  Hello to the Forum

  I have a strange problem with my laptop which began just today that the problem is when I type the letter "o".
  in a sentence, the cursor jumps to the beginning of what I typed. It affects all the programs I need to type
  That is to say for laptop, desktop, explore. Does anyone have some knowledge how can I remedy this?

  Hello

  First of all, it would be interesting to know what laptop you have.
  Secondly the cursor jumps around only by pressing the O key or also different keyboard keys?