Letters of the values typed in a textbox control.

Similar Questions

• Get the value Enum Text of a control Variant

  Hello

  I was wondering what is the best way to get the text of a Enum value control variant.

  What I have is a Subvi, which has a variant as an input control and this VI is designed to read all that is the variant control and write it to a file. I have been using GetTypeInfo VI for what data type is Variant and then on that basis using the variant of the data function to extract the right data. It worked well for most types of data I need.

  However for Enums while I can quite easily read the numerical value by this method, I can't seem to get the text on their part I tried to use the method of the solution posted here , but since my control itself is of type LVVariant I can't to cataloged it or replace it with a more specific class of the Enum. Although when I the LVVariant of the probe or flatten it into a string I can see that it contains all the text data of the enum. What is the best way to get this?

  Any ideas would be appreciated!

  Thank you

  Kewal

  deep in the vilib:

  VariantType.lvlib:GetNumericInfo.vi - takes a variant and returns the array of strings to enum, get the error for the non-numeric values.

  It's what you ask

• Can the color of the text based on the value

  I searched for a way to change text color based on the value fields

  If Textbox =, then A will be blue

  If Textbox = B, then B will be red

  I just need help get the fi then code work, change of color after it is easy

  Any Suggestions...

  To change the boder, add the following script to the exit event:

  If (TextField1.rawValue is "Desired value")
  TextField1.border.edge.color.value = "255,0,0";
  .
  .

  For the fill color, add the following script to the exit event:

  If (TextField1.rawValue is "Desired value")
  TextField1.border.fill.color.value = "255,0,0";

• How to set the value of a column in a table according to another column?

  Hello world!
  
  I use Apex 4.1.
  My question is how can I set the value of a column in a table according to another column?
  I have a table and when I insert the value in the column content, I want to change this value in the note column with the note, which is generated with pl/sql function (function of string returned if the typed value is in the range).
  
  I tried to use javascript as

   $('input[name=f02]').live('change', function(){
  if($(this).val()!='1'){
  $('input[name=f03]').val("test")}
  }); 

  for the development of the column note to test if the value typed in the content of the column is not 1, but this code assigns the value to all the lines and I need to set only the specified line.
  
  Can someone give me a hint in any way to do this if possible?
  
  Kind regards
  drama9346

  You will need create a process on your page type PLSQL and develop this process "we demand" of the page. In this process, you can run the PLSQL you need. That is to say to retrieve the note value as described in your PC:

  and when I insert the value in the column content, I want to change this value in the note column with the note, which is generated with pl/sql function (function of string returned if the typed value is in the range).

  In this process, you must provide a return value of the call, and you can do this by using htp.p. Example:

  DECLARE
     --putting x01 in a var to simplify
     l_test_var VARCHAR2(200) := apex_application.g_x01;
     l_return VARCHAR2(200);
  BEGIN
     -- a simplistic test
     IF LENGTH(l_test_var) BETWEEN 10 AND 20 THEN
        l_return := 'String is between 10 and 20';
     END IF;
  
     --this will write l_return to the buffer, and the ajax callback will receive this
     htp.p(l_return);
  END;
  

  And the code that I wrote above, which is javascript, would need to go where your current code is that binds to the onchange event. The result should be that, when a change is made to this element, an ajax request is made on the server. When the call is finished, it will be the value returned in the item you want.

• multiple-join: get the value of each participant

  In the multiple join, the studio and independent do not allow to define the inside interactive activity can be suspended. Is there another way to put it can be suspended?
  
  If the instance has 5 copies and each is sent to different participants, how to get the value of each user?
  
  Quantity of copies to wait to release the default value is 0. What it means?

  Forget not the only multiple makes copies. The main forum is a copy, it remains as it was before the Multiple. And the join does not know how to merge magically all the data of each copy in the main forum. It takes that code as well in the join. Otherwise, your main instance will remain intact.

  If I understand your example, you're not updating the values of the instance variables of your main instance, only copies.

  If you want to get a number that corresponds to the sum of all values sent by all participants in the Multiple, you must make the amount inside the join:

  This.var2 = this.var2 + copy.var1;
  (don't forget to initialize var2 in the primary instance)

  In this way, whenever a copy arrives at the join, var2 is added the value typed in the participant of this particular copy.

  I hope that helps!

• Whenever I'm on the laptop I did scroll down to read something, as soon as I move Sideways moves up/down also by typing the cursor guard jumping back a few letters in the same line

  Original title: keyboard

  Whenever I'm on the laptop I scroll to the bottom to read something, as soon as I move laterally the screen moves up/face down as by typing the cursor guard jumping back a few letters in the same line, obviously I don't am not literate PC please help me because it makes me crazy! Thanks to all its much appreciated!

  Please see the bulletin:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/keyboard-issues-with-multiple-character-keys-Don ' t/2ad254e1-46e6-40f2-b082-f433f4c9ce0b

  In all likelihood, your laptop keyboard is a failure.

• How to choose the value of a string are numeric together and words of letters (for example, TEST)

  Hi all

  How to choose the value of a string are letters (for example, TEST) and all numeric...

  for example
  TEST 123456
  TEST 34567
  123456 ABCD
  1234 TEST
  TESTING 12345
  TEST 1@234$
  YOUR T 123456

  I want the results of the query as below.
  TEST 123456
  TEST 34567

  And I tried to use regexp_like in this case but without success. See the code below.
  SELECT * FROM TABLE WHERE regexp_like (Description, ' [TEST] % & [[: digit:]] + $');

  How can I do this, please answer.

  Thank you

  WF

  If you want to return only the rows that contain the string 'TEST', followed by zero or more space characters, followed by one or more digits?

  How about this:

  SELECT *.

  FROM my_table

  WHERE REGEXP_LIKE(description,'^TEST\s*\d+$')

• How can I display the value of an XML element in my dynamic textbox?

  I followed the instructions of the forum here. When I examined the record/document, the result did not 100% accurate.

  Here is my Code XML and Flash Code:

  XML	<? XML version = "1.0" encoding = "UTF-8" standalone = "yes"? > < userbase > Test line 1 < projinfo > < / projinfo > < / userbase >
  Flash	var my_xml:XML = new XML(); var myURL:URLRequest = new URLRequest ("userbase.xml"); var loader_URL:URLLoader = new URLLoader (myURL); loader_URL.addEventListener ("complete", fileLoaded); function fileLoaded(e:Event):void { my_xml = XML (loader_URL.data); mynamehosp. Text = my_xml.projinfo; }

  When I saw the dynamic textbox file showed "line of Test." If I did the < projinfo > element reads like this:

  < projinfo > Test line 1 more text here < / projinfo >

  The dynamic TextBox was 'Test line more text here. It is completely ignoring the number "1". How can I fix it? When our company actually uses it, it is possible that we will have (a) number (s) in the values of the organization unit.

  Any ideas?

  The code is very well. Probably you embed the police, and if you did you do have figures included.

• The letters are overlapping when typed in the Microsoft Works 7 word processor

  Original title: problem to read my writing.

  I Works 7.0 when I try to write all the piles of letters in the word processing program, upward. I would say that they are overlapped and I can't read what I write. I tried to change the font. I've tried magnifying it. Nothing, I did the work. Any Suggestions?

  Hi RolleroftheRock,

  We found that Microsoft Works 7 is not compatible with Windows Vista.
  See Microsoft Works 7 compatibility with Vista

  We recommend that you install the software in Windows XP Service Pack 2 compatibility mode and check if the problem persists.
  a. right-click on setup of Microsoft Works 7 icon and choose Properties.
  (b) in the properties panel, click the Compatibility tab.
  c. check the Compatibility Mode box.
  d. Select Windows XP (Service Pack 2) in the mode area.
  e. click on apply to save your changes.
  f. open the file and install it successfully.
  g. Once you have installed the software, restart the computer.
  h. check if the problem persists.

  See make older programs run in this version of Windows

  Note: If the problem persists, you must upgrade the version of the software to the Windows Vista-compatible version.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DBMS_CRYPTO. HASH returns the value encrypted letters

  Hi all

  SE 12.1

  I'm using dbms_crypto. Hash to encrypt the values. But encrypted the returned string is at the top of the case. Calling WebService Im externally requires the proper case...  I've seen other ciphers (java-based) hash functions that seem to properly encrypt with a mixture of cases, what I need.

  Is it possible to return the string that is encrypted in the proper case.

  DECLARE

  l_ccn_raw RAW (128);

  BEGIN

  l_ccn_raw: = utl_raw.cast_to_raw('1234');

  l_ccn_raw: = dbms_crypto.hash (l_ccn_raw, dbms_crypto.hash_sh256);

  dbms_output.put_line (' TOKEN: ' |) ( l_ccn_raw) ;

  END;

  You can always try dbms_output.put_line (' TOKEN: ': bass (l_ccn_raw));

  But are you sure that you don't need a hashvalue base64-coded?

  dbms_output.put_line (' TOKEN: ' | utl_raw.cast_to_varchar2 (utl_encode.base64_encode (l_ccn_raw)));

• JavaScript to check the value of the Textbox

  Hi all
  
  I have a few simple javascript in the header of my page to check the value of an element... There is no errors in Firebug, but the alert window is also never coming.
  

  if ($v('P2_ITEM') == 'VALUE1')
  {
  alert('VALUE1');
  }
  if ($v('P2_ITEM') == 'VALUE2')
  {
  alert('VALUE2');
  }
  if ($v('P2_ITEM') == 'VALUE2')
  {
  alert('VALUE2');
  }

  Thanks for any help.

  Use double quotes in JS to check the string values:

  function test_choice()
  {
  if ($x('P2_ITEM') == "Test1")
  {
  alert("Test1");
  }
  if ($x('P2_ITEM') == "Test2")
  {
  alert("Test2");
  }
  if ($x('P2_ITEM') == "Test3")
  {
  alert("Test3");
  }
  }
  

• Textfield text to capital letters and send the value to another Textfield

  Hello world
  
  I used the example of Denes Kubicek http://htmldb.oracle.com/pls/otn/f?p=31517:113:425753199246065:NO. I managed to that reproduce in my application but I have a little problem.
  
  I want the value of the text box to be sent to another area of text, as shown in the example, but I also need the text box where the end user will register the value will be replaced by uppercase aswell.
  
  There is an example of the exact thing I want on this example page (text third field down) but I can't combine the two in the right text box have.
  
  Does anyone know how I could do this?
  
  Kind regards
  -N.S.N.O.

  NSNO:

  You can specify

  onKeyUp = "f_getTextUpper ('P113_TYPE_TEXT', 'P113_TEXT_DISPLAY'); f_getTextUpper ('P113_TYPE_TEXT', 'P113_TYPE_TEXT')" "

  in the HTML attributes for the item P113_TYPE_TEXT

  CITY

  Published by: Anderson city on June 16, 2009 06:03

• Default value is evident in textbox for data entry

  Hello everyone.  I am building a form of contract farming for a customer.  Here is a picture of high level of form for discussion:

  Operating agreement (object label for the title of the form)

  By signing this document, you agree to all of the language indicated on the following pages. etc. etc. etc. (label object for the static text)

  Name of the customer (text object for data entry)

  Address (text object for data entry)

  City (text object for data entry)

  State (text object for data entry)

  Article 1 - this agreement is between the customer, as indicated above and the company providing, etc. etc. etc. (object label of static text)

  Question 1

  By the request of the customer, I removed the label from the name text box of the Client (as well as all the other text boxes).  Want me to set the default value of this to say 'Customer name' indicating that the customer name text box must be typed here.  I've added the phrase name of the customer to bristle reversal as well help.  So we do not weigh those filling out the form, I added a line of JavaScript on the Enter event , so the default text in this text box is removed when the user clicks the text box to enter data.  The code I used is: this.rawvalue = "";  

  This solution works very well because we do not want those filling in the form of having to select and delete the default of 'Customer name' when they want to enter data.  Thus, with the JavaScript in place by default is removed after clicking in the textbox control.  The only problem I have with this solution is that if a person would click in this text box after entering the data or tabs in the text box after you enter the data, the data that has been entered is deleted (for the code).  Does anyone know how to set a default value that clears when the user enters in the text box for entering data, but does not erase what the user types in if they want to add to the data they entered or accidentally click in the text box.

  I thought to make the textbox to read after a user of other data and leaves the text box BUT if they want to change what they got they can't because it is read-only.

  Any thoughts on a solution that would meet my needs?  I prefer not to have a button on the form that a user clicks to erase the contect of a specific text box, but it's the only other thing I can think of that would work.

  Question 2

  For label objects as Article 1, I need to add a large amount of data (more than 1 page of text in the paragraph format) in a label/text box.  I suppose that the best object to copy and paste this data into is a label and not a text box (which I could remove the formatting and reading only).  My one major requirement for this is that I develop text fields before this Article 1, which should push (wrap) Article 1 contained on a second or third page.  I can set the property object to break up, but I don't know if that will lead the content of Article 1 partly wrap to a second page.  It will be (is that the right solution)?  I prefer not to enter this long content of many objects of label for each paragraph, but I did it in the past and it works.

  If it's important, my design of the shape has a subform (with the property set to cast) and each object embedded in this subform in the hierarchy list (additional subforms, text boxes, labels).  I implement it effectively and function I wanted me?  I know it's hard to image.

  Thank you all for reading my post and I expect all your comments and suggestions.

  Jeff

  Hi Jeff,

  Here is an example, where the textfield object has a null type. This allows to have the legend inside the textfield object. As soon as the user clicks inside the textfield object, the 'legend' disappears and the textfield object is available for the user to type in.

  https://Acrobat.com/#d=uqcNdyoPayTa2MbPb8F88A

  The form has two options. The second replicates the 'legend' at the end in parentheses if the field is NOT null.

  I will come back to q2 after a bite... Army market on her belly

  Niall

• Using Ctrl + F tool, type a letter then the browser starts to type the letters in the address bar, how do I do?

  This just started happening. Whenever I you use Ctrl + f tool, I type a letter and then I start typing the following letters in the address bar. I have to click in the search box type each letter as it jumps to the address bar with all the letters of type I. It's very frustrating, please help.

  It certainly isn't by design... In the case where one of your extensions is concerned, could test the search mode without failure of Firefox feature? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  Not all add-ons are disabled: Flash and other plugins still works

  After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

  Any difference?

• "When using the address bar offer...". "Even the value 'Nothing' I always get suggestions. To stop, please!

  I tried to change the field to "no" several times without any results. It always gives me suggestions. I have tried clearing recent history with no results either. As you can see below, my "browser.urlbar.autoFill", "browser.urlbar.autoFill.typed" and "browser.urlbar.autocomplete.enabled" are all set to "false".
  Any help with this is GREATLY appreciated.

  What is the value of the browser.urlbar.maxRichResults pref?