Letters write about themselves in the Action window

Similar Questions

• In the Actions window multiline string

  There is probably a simple answer for this, but it has been driving me crazy for years. In the Actions Panel, I write a paragraph of text appear in a dynamic text field. If I write it as a single line (covering perhaps half a mile), it very well. If I try to divide the text for convenience only, as...
  
  Display.Text = "this is an experiment to see if there is a way
  Type several lines of text in the Actions window. « ;
  
  ... I get a syntax error. If I insert a backslash at the end of the first line, as...
  
  Display.Text = "this is an experience to see if there is no way\.
  Type several lines of text in the Actions window. « ;
  
  ... the text is displayed correctly in the text field, but the backslash is also displayed. I don't want a line break or a newline (\n, \r); I just want to be able to break the chain while I write it. Any suggestions? Thanks in advance.
  
  

  Ah, I found it; the tiny arrow pointing down in the upper right of the Actions Panel. Thanks again!

• General information about licensing of the "Microsoft Windows 7 Ultimate, Version full (PC DVD)"

  Hello

  I've never had to buy a Windows DVD facility before so my questions may seem a bit Basic.

  I intend to buy a copy of 'Microsoft Windows 7 Ultimate', full Version (PC DVD) from Amazon. (I think I should be clear of a counterfeit product, if I buy direct from Amazon).

  Am I right in thinking that if I buy this product so I can install it on several PC as long as I have installed it on more than one PC at a time?

  Really I intend to install first to my current PC, familiarize yourself with Windows 7 and then, finally, just abandon my old PC, buy a new and then install Windows 7 on this new PC. Is it possible for me to do it without breaking the terms of licenses for this product?

  Finally, (assuming I have reason to think that it is normal to do so) is there something I should do that I could not be aware of the transfer Windows 7 from my old PC to a new? I think I mean it's OK to me to erase the hard drive from the old PC before binning - and which supports Windows 7, having already been installed on this PC?

  Hello

  I've never had to buy a Windows DVD facility before so my questions may seem a bit Basic.

  I intend to buy a copy of 'Microsoft Windows 7 Ultimate', full Version (PC DVD) from Amazon. (I think I should be clear of a counterfeit product, if I buy direct from Amazon).

  You shouldn't have a problem if his continuous from Amazon.

  Am I right in thinking that if I buy this product so I can install it on several PC as long as I have installed it on more than one PC at a time?

  As long as Windows 7 is installed on one PC at a time, Yes, you can uninstall it from the computer you install it 1st on and re - install on another PC.

  Really I intend to install first to my current PC, familiarize yourself with Windows 7 and then, finally, just abandon my old PC, buy a new and then install Windows 7 on this new PC. Is it possible for me to do it without breaking the terms of licenses for this product?

  Before abandon you the old PC, delete the Windows 7 partition and you will not have a license problem.

  Finally, (assuming I have reason to think that it is normal to do so) is there something I should do that I could not be aware of the transfer Windows 7 from my old PC to a new? I think I mean it's OK to me to erase the hard drive from the old PC before binning - and which supports Windows 7, having already been installed on this PC?

  Freeing your product key for use on the new PC, but because the key has already been used once (your 1st PC / old), you need to activate by phone after installing it on the new PC.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  J W Stuart: http://www.pagestart.com

• ERROR: The action window says: "NO ACTION is AVAILABLE" while running Norton 360 'Difficulty now' utility in the Windows Vista-based computer.

  Original title: registry cleaning.

  Norton 360 has an Amber 'FIX NOW' on registry cleaning, but when he finished a result message appears "ERROR".

  The window for action says: "NO ACTION is AVAILABLE!"

  So what is the solution to this you problem.

  I also tried "RUN CHKDSK" for example. type cmd then ok followed by "chkdsk c: /f /r.

  Now I get ' ACCESS DENIED AS YOU DO NOT HAVE the PRIVILEGES SUFFICIENT. YOU HAVE TO INVOKE THIS UTILITY

  RUNNING IN ELEVATED MODE '?

  Hi BRIAN,.

  (a) I suggest to uninstall Norton temporarily using the removal tool.  You can download & run the Norton removal tool to remove Norton completely from your machine & see if the problem still occurs.

  Download and run the Norton removal tool to uninstall your Norton product

  (b) later, reinstall the Norton software.

  You can also contact Norton support to obtain assistance.

  Hope the helps of information.

  Please post back and we do know.

• Windows 7 action center > security > I can't change the uac user account at the level of the control window freezes / uac rest!

  PROBLEM: ACTION CENTER > SECURITY > USER ACCOUNT CONTROL FREEZES AND REMAINS OFF - I CAN'T CHANGE THE UAC LEVEL. When access to the center of the Action (Windows 7-32 bit) > Security > UNDER USER ACCOUNT CONTROL IS OFF > said UAC will be NEVER NOTIFIER > and below it in blue is the option to click on "Choose your level of UAC" > I click it and it opens a window "DECIDE if he MUST BE INFORMED of CHANGES to YOUR COMPUTER" with a feature of landslide to choose the level > I DRAG to ALWAYS NOTIFY ME AND EACH TIME the SCREEN is IT FREEZES LET ME HIT OK - so I can not change this setting. It won't let me change to always warn me - the recommended setting, and I can't go beyond that! The window closed either! I'm trying to close the window by clicking end task in Task Manager - it takes several attempts before / if it can close this frozen window... BUT THE KEY IS THAT I CAN'T CHANGE THE UAC LEVEL - THE SCREEN FREEZES AS SOON AS I GLIDE TO ALWAYS WARN ME - HELP? * NOTE: a few times after the Task Manager tried to close the window without success, I saw a box pops up that says: Manager of COM surrogate has stopped responding... he tries to fix - as if Windows stops responding, and he tries to recover or fix the problem. I would like any help or information please, as to why I can't change this setting, even after I give an administrator password, you are prompted, to say good make - when I am logged in as a standard user. Help? Thank you!

  Hi Shellzak,

  Thanks for posting this question in the Microsoft Community!

  I understand that you can not change the UAC settings on the computer and the system hangs. I'm sorry for the inconvenience caused to you. Rest assured that I will do my level best to help you.

  Did you of recent changes to the computer before the show?

  I suggest the following method and check if it helps to solve the problem.

  I suggest you try to activate UAC from the command line and check if it helps.

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) run this command

  Reg.exe ADD HKLM/v EnableLUA /t REG_DWORD /d 1/f

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• The download window appears no information since the last update of Firefox

  I had to create a new account to help just to get here.

  Your navig was fucking up like crazy since the last update. I had nothing else to connection problems in several sites. Sites would connect at random, then I wouldn'; t be able to reconnect. I tried to make an account on a new site and had to try 11 times crazy until he has known. and just now, when I tried to ask a question of troubleshooting, my username and password would not work. So I sent a request for password reset. Nothing happened. I sent at least FIVE password reset requests. None of them went through. When I tried to enter a different user name, thinking maybe that was the problem, as soon as I re-typed and clicked any where outside the name space, he would return to the name that was already there. What the hell!

  I didn't still the problem, I first want to contact you about!

  The download window no longer works. I download a file, I click on "Downloads" to see how long it will be, I don't see anything. Gross, white, white. And Yes, I know that some files download so fast, they're gone until I open the window. I mean great videos megabytes and disc images. No indication that they are downloading at all.

  All of this has happened since 19.0 installed. I need to disable the updates in the future to keep the browser working properly!

  Well, I found out what was going on. It turns out it was a confrontation with an add-on after all:

  http://update.DownloadHelper.NET/index.html?TS=1361662188

  So it makes sense why it persists even after reset and reinstalling. Sorry I lost all the time, but I enjoyed your trying to find solutions.

  Although I hope that the problems I've had of logging in and out of sites disappear soon too.

• bug? Cannot restore the actions Toolbox

  Gh_sg query - March 2008: The left pane of the Actions window components usually 2 Sub-la superior Action Toolbox and Script browser below. By chance, I dragged the divider (between the 2 subsidiary windows) so much so that the Action Toolbox is not visible. Now I can't restore the Toolbox of the Action. Any help with the restoration of this secondary component would be appreciated.

  I'm having the same problem and have done your discussion to rafiqelmansy response:

  Hello
  When I stuck with such a situation, I always run to reinstall the application. I do not know the file config.xml file, sorry

  Is to reinstall the final solution to this?

  Thank you

  Charlotte

  Cree is done with all caps and often a lot of exclamation points, so I do not see it like that!

  Personally, I would not upgrade to CS4 for a few reasons...

  (1) I have never... it's full of bugs when it came out first so I avoided altogether...  Finally, they came out with a patch sometime last year, but I don't think they have cured its ills... no regrets at my end, with the exception of not being able to help people who attach CS4 files

  (2) CS5 is rumored to be released sometime this year, so if you upgrade tto CS4 now, you will have wished you don't have when you see published CS5 a few months from now (that's what happened to me when I bought CS3... but my reluctance to upgrade immediately bears its fruit in my POV... First, I found the forums and questions that CS4 is before a knee-jerk reaction could lead me to buy it)

  Since I have CS3, maybe I'll take a look in your dilemma, if all goes well without recreate for myself.  I have to think that there must be a somehwre option to display some article is that you talk.  For my part, I have the code everything by hand, so I'm blind to everything that is out of the face - never pay any attention to it.

• A few Questions about the advanced Actions window

  Hello

  I have a few questions about the progress of the Actions (using the version of track CP7)

  1. What is the function of the action to "continue?"   Out of the peak action and advance the playback cursor?

  2. What does mean this comment "Nested calls to action advanced is a nice improvement."? Is the advanced decision at the top of a page of action tabs?

  3. What is the function of the option "custom" in the IF statement - "preform action if - custom", it doesn't seem to do anything for me?

  4. where can I get information about the timeline / playhead interaction with advanced actions, i.e. where the playhead is going again at the beginning of the slide. slide custom question - display button, e.g. verification of responses, comments - when all the objects are at the beginning of the timeline. I'm looking more for the read head of infromation functionality rather than how to implement this type of question.

  Thank you

  Donal.

  Continue: If an advanced standard action is triggered by a button, this will not trigger the playback head. If you want out, you can use continues. Continue can also be a choice in a conditional action, when one orders branching has nothing to special, but in advance. Continuous is also the "dummy" statement/command (this is the official name of a line in the dialog box advanced actions) If a statement has become unusable due to some reasons, it will be replaced by continue

  There is no nested call stocks advanced possible right now, one of my many feature requests. It would be sort of a subroutine that you can use over and over again, instead of having to create each time when necessary.

  A decision is one of the conditions to be an advanced conditional action. They allow to create more complex actions, as a loop or arrays are not possible. All decisions are executed in sequence and always.

  Custom: is a combination of or but it is rather limited, because you cannot use parentheses.

  I guess you'd better visit my blog if you want to learn more about the advanced actions.

  http://blog.lilybiri.com/

  I also did several Webinars on stocks advanced, last this afternoon (on the sharing of the actions) for Adobe. They are all available on request.

  Lilybiri

• The action cannot be completed because the file is open in Windows Explorer.

  OK, it seems to be coming a lot but no one was able to respond (including Microsoft) so I'll ask, and be as specific as possible.

  Because I work with vector art that I constantly have to save files by crush the and everything was cool with WinXP pro.  I have Win7 Pro and everything was cool, until recently.  Whenever I tried to overwrite my files, I would get an error message saying that the file was either dead or opened elsewhere, but it has happened about 50% of the time.  A launch the re-registration of files with different names.  After obtaining the files re-registered I then try to remove and rename files, but found I couldn't do it anymore, as I was constantly getting the error message "The action cannot be completed because the file is open in Windows Explorer."  Closing and reopening the browser do nothing.  Someone said if not empty the trash bin works, but not for me.  The files are on an external drive, I tried to disable the cache of writing by Device Manager and Windows Management Console (or other) frozen and took the pc with it (nice work, MS!).  Reboot seems to fix the problem for a bit, but he returned quickly and randomly.  It also seems to randomly select to lock files.  Some files I can not change, some that I can.  Others begin to operate after some time of inactivity.

  I tried to disable thumbnails in Explorer and even added a DWORD NoThumbnailCache in the registry, but it still happens.  Basically, I'll have to save all of the new files over and over again and that from time to time be able to remove the "old" while being only randomly too write others.  This question seems to be infestation Vista and Win7 and people have waited for a fix, Microsoft, but was mum on the issue.  If anyone can come up with a solution, it would be great.  It is killing my productivity!

  Common guys...
  Im having this problem too and I've been thought IE9 is at the origin of the problem, some how, I don't want to disturb...

  Here are some solutions:
  Please note that I'm looking, there is not any solution patch for this program by Microsoft, you can maintain it yourself. And correct solutions in this way losses.

  Solution 1: Use CMD.
  0 - note the following 3 steps will complete the process explorer.exe, so your desktop and windows Explorer all open files and any associated process would stop.
  1. run the Task Manager. (by pressing ctrl + shift + esc or etc)
  2 - go to the processes tab.
  3 - find "explorer.exe" and click on the button "complete the process". If you find several explorer.exe, kill them all.
  4. now, click the menu file-> new task (run...)
  5 type CMD, and then click OK.
  6. now you can do something you couldn't have done before with this user interface. Some useful commands:
  -cd: change the current directory. Use 'CD..' to the 'button' in windows Explorer.
  -dir: lists the existing file and folders in the directory current. Use ' dir/p' to the list in the pages.
  -del [file name]: removes the file [filename] existing in the current directory.
  -Rename [name of file] [new file name]: rename the file [old file name] existing or a file existing in the current directory to [new file name].

  Solution 2: Use a different file manager.
  0 - install and run another Manager file as "XYPlore".
  1 Note that the following 3 steps will end your explorer.exe process, so your desktop and windows Explorer all open records and all other related processes would cease.
  2. run the Task Manager. (by pressing ctrl + shift + esc or etc)
  3 - go to the processes tab.
  4 - find "explorer.exe" and click on the button "complete the process". If you find several explorer.exe, kill them all.
  5. use XYPlore UI and do what you want.
  Please note that the problem could happen with this kind of external explorers too. So close any file and go into a secure after your working directory.

  Solution 3: Do it yourself!
  If you can program, there are some codes that might help you. These codes which talks about Im, says MS Windows to remove your annoying pinned files just before you shut down the system.
  Here is an example:
  MoveFileEx ('C:\windows\system32\ld21E.tmp', nil, MOVEFILE_REPLACE_EXISTING or MOVEFILE_DELAY_UNTIL_REBOOT);
  This code will work correctly in Delphi from Borland compilers, and as you can see, the "ld21e.tmp" file is deleted after compiling this code and restart your windows.

  I wish I can do better, as to publish an Explorer that do what you want automatically, so I hope that these can be useful.
  Some how you can check this thread too, it may be useful:
  http://social.answers.Microsoft.com/forums/en-us/vistafiles/thread/ce44b65d-2430-4865-BC31-fd84d3085d74

• I have a virus that cannot be deleted. I want to reformat the drive, but I don't know how to clean my computer. Will this remove the virus, or simply write about it? also is there a way to erase and start over.

  Windows has identified a virus that cannot be deleted. reformatting will solve this problem? also wiping my own comouter solve this problem or just to write about it. Is there an online tool to clean my computer... more, after that how do I reinstall windows

  Try AVG and Avast free programs to find and fix the problem. In the future, these two will warn you if the malware is a download.  If this does not work, try the highjackthis program.  It will save a log that can be used by sites for free assistance to correct your problem.

  I would NEVER erase the hard drive!  I've been SP since its release and have have 60 programs on my computer.

• How can I get rid of the small window of Action Center?

  How can I get rid of the window of Action Center? I read Center wants to tell me what action and you click on the x in the upper right of the window that appears when you open the center of the action, but I have a small window at the bottom right which is above any other window, and I want to get rid of it. It is not an x or a close button. How can I get rid of this horse?

  Before this problem, when I started to Win 7 me a choice of normal startup or a 'safe mode' start because he thought that I had recently installed a device that caused a problem. Windows tried to solve the problem but says have failed, and then I was able to start windows normally. I have not recently (last days) installed anything, but the PC is about 2 weeks old, and I have installed things like an external usb drive, a printer, a flash drive, an mp3 player and a wireless mouse.

  Maddog1381,

  Check out this TechNet article that describes how to disable the pop-ups Action Center:

  http://TechNet.Microsoft.com/en-us/magazine/dd492018.aspx

  I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• the preview window does not show the document that I'm about to print in Sierra

  The preview window does not display the document that I'm about to print. This problem started as soon as I upgraded to Sierra. It occurs in many applications - including in Microsoft Excel 2011.

  

  

  Hello, David Bry1,.

  Thank you for using communities of Apple Support.

  I understand that when you try to print from a number of different applications, you do not see the preview of the document you are printing. I would like to assure you that I see the preview as well when I print. Let's see how we can get this resolved.

  I advise you to ensure that the printer software is up-to-date on your printer Brother DCP-7065DN. Please choose 'Available Software' brother printer and scanner software for macOS Sierra, El Capitan, Yosemite, and Mavericks

  If a software update is available, please install and then test and see if you get the same result.

  Have an amazing day!

• After a crash of the system Windows, Thunderbird displays only about half of my gmail folders (labels).

  In my email account, I use a number of folders to organize my e-mail messages. After a crash of the system Windows, Thunderbird restarted, but now I see about half of my files and cannot access a large number of messages filed away. They always appear when I use my browser to access the gmail account, so the labels are still there. How can I repair damaged files thunderbird/arrangements? I use the current version (31.4.0)

  AHA! It already showed that I have subscribed to all of the folders, visible and missing, but after a combination of clicks (not sure what sequence of refreshment and subscribe and OK), they are all back.

  Thank you! Very useful.

• Write the window covered by the main window of TB on Mac

  I am a novice Mac user, so maybe this isn't a matter of TB, but I hope that others have understood how address. When I click on write to compose a new message, the new message composition window opens and everything seems normal. If however, I need to return to the main window of the TB, the window of writing (new message composition) withdraws in the background (as it should). When I try to return to the window of writing, I can either reduce or close the main window of TB to search entry window. The command - Tab key sequence shows icon of 1 TB, which is the main window. In Windows, the writing and the main window of TB show in the Alt - Tab sequence with each window having the same ability to manage. Is there an easier way to navigate back from writing to the main window without having to close or minimize Windows on the MAC?

  If you click on Cmd-' on the keyboard, you should be able to switch the focus to the window with any application that uses several windows.

• I can't write about Mozilla Firefox, even with the on-screen keyboard. How to solve this problem?

  When I want to write about the search bar, or for that matter, my keyboard does not work. I can't find the solution to this problem.

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox